saturation curveとは 意味・読み方・使い方

According to the gain curve and a third LUT, the third processing unit determines a set of gain parameters and, according to the normalized saturation and the gain parameters, determines a gain of saturation.例文帳に追加

前記ゲインカーブと第３変換表とに従い、前記第３処理ユニットは、ゲインパラメータの組を決定し、前記正規化された彩度と前記ゲインパラメータとから、彩度ゲインを決定する。 - 特許庁

And, an amplitude Vpp_-m(>Vpp_-(m-1)) differing from the aforesaid amplitude Vpp_-(m-1) is obtained based on density saturation characteristics (density saturation curve), and the patch image is formed by the amplitude Vpp_-m, then, the optical density Dm of the patch image is detected.例文帳に追加

そして、濃度飽和特性（濃度飽和曲線）に基づき先の振幅Ｖpp_(m-1)と異なる振幅Ｖpp_m（＞Ｖpp_(m-1)）を求め、この振幅Ｖpp_mでパッチ画像を形成し、そのパッチ画像の光学濃度Ｄmを検出する。 - 特許庁

The combined characteristics is translated by a desired pressure in the direction of curve R, i.e., the saturation curve of refrigerating gas used in the refrigeration system by filling an inert gas.例文帳に追加

この特性は、不活性ガスの充填により冷凍システムに用いられている冷凍ガスの飽和曲線である曲線Ｒの方向へ所望の圧力だけ平行移動される。 - 特許庁

Relating to the multicolor image formed by an electrophotographic method by using the multicolor toner, the excellent color reproducibility is obtained because the reflectance of a magenta curve SM1 for 400-500 nm is set as about 40%, and excellent saturation is obtained because the inclination of a yellow curve SY1 near 500 nm is large, so that a color reproducibility width is large.例文帳に追加

このような多色用トナーを用い電子写真法で形成した多色画像は、マゼンタ曲線ＳＭ１の４００〜５００ｎｍの反射率が４０％程度で色再現性が高く、イエロー曲線ＳＹ１の５００ｎｍ付近の傾きが鋭く彩度が高く、色再現幅が広い。 - 特許庁

This simulation method is constituted of a process for repeatedly deformation of the metal layer in a predetermined amplitude and acquiring actually measured data, showing a stress-strain curve at the time of saturation, the process for forming a uniaxial increase curve on the basis of the actually measured data, and a process for forming a material constant introduced into a curing rule on the basis of the formed uniaxial increase curve.例文帳に追加

本シミュレーション方法は、金属層を所定の振幅で繰り返し変形させ、飽和時の応力−ひずみ曲線を示す実測データを入手する工程と、その実測データに基づいて単軸増加曲線を作成する工程と、作成された単軸増加曲線に基づいて硬化則に導入される材料定数を作成する工程とを備える。 - 特許庁

When the filling quantity of the refrigerant gas A having a high vapor pressure is reduced, pressure of the refrigerant gas A saturates first as the room temperature increases resulting in saturation pressure characteristics as shown by curve A2.例文帳に追加

ここで、高い蒸気圧を持った冷媒ガスＡの充填量を少なくすると、室内温度が上がるに連れて、冷媒ガスＡが先に圧力飽和して曲線Ａ２に示すような特性になる。 - 特許庁

With a relationship between the evaluation value DFe and iron concentration determined as a calibration curve in advance, the recombination life time τ1 of Fe-B before dissociation under optical irradiation and the combination life time (saturation value) τ2 after dissociation are measured, which are collated to the calibration curve for evaluating the iron concentration.例文帳に追加

そこで，評価値ＤＦｅと鉄濃度との関係を検量線として予め求めておき，光照射によるＦｅ−Ｂの解離前の再結合ライフタイムτ１と解離後の再結合ライフタイム（飽和値）τ２とを測定し，これらτ１，τ２を上記検量線に照合することで鉄濃度を評価することが可能である。 - 特許庁

When performing anodic oxidation to the stainless steel sheet, the treatment of measuring an anode polarization curve while performing sweeping to the boundary potential of a passive area and an over-passive area under the same condition as the anodic oxidation is repeatedly performed until the potential of a current density: 100μA/cm^2 reaches saturation.例文帳に追加

ステンレス鋼板に対して陽極酸化処理を行うにあたり、前記陽極酸化処理と同じ条件で、不動態域と過不動態域の境界電位まで掃引しながらアノード分極曲線を測定する処理を、電流密度：100μＡ／ｃｍ^2 の電位が飽和に達するまで繰り返し行う。 - 特許庁