Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Brickearth

This is an old revision of this page, as edited by Lumos3 (talk | contribs) at 07:20, 7 April 2012 (Local nature of name now clear). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Brickearth is a term originally used to describe superficial windblown deposits found in southern England. The term has been employed in English speaking regions to describe similar deposits.

Brickearth deposits exposed as the topmost orange red layer in the cliff at Milford on Sea , Hampshire , UK
Brickearth deposit exposed in a small quarry in the Chiltern Hills at Cholesbury , Buckinghamshire, England

Brickearths are periglacial loess, a wind-blown dust deposited under extremely cold, dry, peri- or postglacial conditions. The name arises from its early use in making house bricks, its composition being suitable for brick-making without additional material being added. Its composition also allows the clay to be fused at temperatures attainable in a wood fired kiln.

The Brickearth is normally represented on 1:50,000 solid and drift edition geological maps[1]. In the Thames Valley area, where the Brickearth overlies certain River Terrace Gravels, it has been reclassified on more recent maps as the "Langley Silt Complex"[2].

Description

Brickearth is a superficial deposit of homeogenous structureless loam or silt [3] deposited during the Pleistocene geological period. [4] Brickearth typically occurs in discontinuous spreads, across southern England and South Wales , south of a line from Pembroke in the west to Essex in the east in depths of up to a meter. Commercially useful deposits of about 2m to 4m thick are present in Kent, Hertfordshire and Hampshire, overlying chalk, Thanet Beds or London Clay. The original deposition of the sediments occurred under cold climates where fluvial out-wash sediments from glaciers were subject to windy dry periods. The exposed finer-grained sediments were picked up and transported by the wind and were deposited wherever the wind strength decreased.[5]

There are extensive brickearth deposits in Kent, particularly on the North Downs dip slope and on the Hoo peninsula, sections of the Medway and Stour valleys. The mineral content is critical in brickmaking and requires precise proportions of chalk, clay, and iron.[6] Brickearth requires little or no admixture of other materials to render it suitable for the manufacture of 'stock bricks'. [3] In 1986 there were 4 active stock brick works in Kent, at Otterham Quay,Funton, Murston and Ospringe.

The brickearth gives rise to rich and fertile soils which have been exploited for agriculture. [7] It is prone to rapid ‘collapse’ settlement when saturated with water and does not provide a firm foundation for buildings. [6]

In Chichester, the brickearth is flinty brown silty clay up to five metres thick, which occurs on the coastal plain. The brickearth is unfossiliferous but occasionally yields man-made flint implements.[4]

References

  1. ^ BGS solid and drift edition 1:50,000 Maps
  2. ^ Gibbard, P. L., 1985 Pleistocene History of the Middle Thames Valley
  3. ^ a b Kent Minerals Subject Plan, BrickEath Written Statement, May 1986, Kent County Council Planning Department. Accessed April 2012
  4. ^ a b Pleistocene Chichester Museum website. Accessed April 2012
  5. ^ Character Area Descriptions GCA 1 Tendring Plateau Geo-East Partnership Accessed April 2012
  6. ^ a b [http://www.bgs.ac.uk/science/landUseAndDevelopment/engineering_geology/formation_engineering.html Loessic Brickearth Map] at Physical Properties and Behaviour of UK Rocks and Soils. British Geological Survey, National Environmental Research Council. Accessed April 2012
  7. ^ Tendring Essex Geodiversity poster Peter Allen, Gerald Lucy, Teresa O’Connor, David Bridgland, William George, Adrian Gascoyne, Adrian Knowles, Tom White. Quaternary Research Association, Geo Essex . Accessed April 2012

doi: 10.1144/​GSL.QJEGH.1996.029.P2.04 May 1996 Quarterly Journal of Engineering Geology and Hydrogeology, 29, 147-161.