Reset de Puertas
Reset de Puertas
Reset de Puertas
*(
RESUMEN DE COMANDOS PARA RESETEAR PUERTAS (MGC- PER)
Guardar cambios
Si aparece un cuadro de dilogo, hacer click en si, luego ingresar al sistema con los siguientes datos: Login: soporte Password: ecc123
2. Reset de nodo ZTE Ejemplo: Nodo ZTE_06_SANPEDROATACAMA Nombre Puerta ADSL 00-00-01-19 IP nodo: 10.97.26.14 [soporte@telsa ]$ telnet 10.97.26.14 Trying 10.97.26.14... Connected to 10.97.26.14. Escape character is '^]'. ###################################################################### # # # Welcome to ZTE Full Service Access Platform # # # # Press Return to get started # # # # Copyright 2005-2009 , ZTE Co.,Ltd. # # # ###################################################################### Login: ehdata Password: ehdata ZTE_06_SANPEDROATACAMA>enable Please input password: ehdata ZTE_06_SANPEDROATACAMA# config ZTE_06_SANPEDROATACAMA(config)# show interface 1/19 port-status // muestra el estado de la puerta 19 en el slot 1 Port AdminStatus LinkStatus AtucTxRate(kbps) AturTxRate(kbps) ----------------------------------------------------------------1/19 enable up 2304 736 ZTE_06_SANPEDROATACAMA(config)# interface adsl 1/19 / ingresa a la puerta 19 del slot 1 ZTE_06_SANPEDROATACAMA(cfg-if-adsl-1/19)# shut // baja la puerta 19 del slot 1 ZTE_06_SANPEDROATACAMA(cfg-if-adsl-1/19)# no shut // sube la puerta 19 del slot 1 ZTE_06_SANPEDROATACAMA(cfg-if-adsl-1/19)# exit ZTE_06_SANPEDROATACAMA(config)# show interface 1/19 port-status Port AdminStatus LinkStatus AtucTxRate(kbps) AturTxRate(kbps) ----------------------------------------------------------------1/19 enable up 2304 736
3. Reset de nodo HWE_UA HWE_UA_CURICO ADSL 00-00-06-03 ip de nodo 150.150.153.9 [soporte@telsa ]$ telnet 150.150.153.9 Trying 150.150.153.9... Connected to 150.150.153.9. Escape character is '^]'. Huawei HONET UA5000 Universal Access Unit. Copyright(C) 1998-2006 by Huawei Technologies Co., Ltd. >>User name: ehdata >>User password: ehdata HWE_UA_CURICO>enable HWE_UA_CURICO#config HWE_UA_CURICO(config)#display board 0/6 // muestra el estado de las puertas en el slot 6 ------------------------------------Board Name : H601CSLB Board Status : Normal Online state :----------------------------------------------------------------------------Port Port Type Port Status Line Profile Alarm Profile Ext Profile ----------------------------------------------------------------------------0 ADSL Activated 6 1 -1 ADSL Activating 2 1 -2 ADSL Activating 19 1 -3 ADSL Activated 19 1 -- // tipo de puerta adsl 4 ADSL Activating 2 1 -5 ADSL Activating 2 1 -6 ADSL Activating 23 1 -7 ADSL Activated 2 1 -8 ADSL Activating 19 1 -9 ADSL Activating 2 1 -10 ADSL Activating 2 1 -11 ADSL Activating 2 1 -12 ADSL Activating 2 1 -13 ADSL Activating HWE_UA_CURICO(config)#interface adsl 0/6 // ingresa al slot 6 HWE_UA_CURICO(config-if-adsl-0/6)#deactivate 3 // desactiva la puerta 3 del slot 6 HWE_UA_CURICO(config-if-adsl-0/6)# Deactivate port 3 successfully HWE_UA_CURICO(config-if-adsl-0/6)#activate 3 profile-index 19 // activa la puerta 3 del slot 6 e indica el perfil de velocidad (profile-index) 19 HWE_UA_CURICO(config-if-adsl-0/6)# Activate port 3 successfully Asistente tcnico Juan Carlos Flores MGC -PER
4. Reset de nodo HWE_03 Ejemplo 1: HWE_03_LOSVILOS slot 2 puerta 1 ip nodo 150.150.151.60 [soporte@telsa ]$ telnet 150.150.151.60 Trying 150.150.151.60... Connected to 150.150.151.60. Escape character is '^]'. Huawei MA5103 Multi-service Access Module. Copyright(C) 1998-2005 by Huawei Technologies Co., Ltd. >>User name: ehdata >>User password: ehdata HWE_03_LOSVILOS>enable HWE_03_LOSVILOS#configure Terminal HWE_03_LOSVILOS(config)#show board 0/2 // muestra el estado de las puertas en el slot 2 -----------------------------------Board Name : H511SHLA // tipo de puerta shl Board Status : Normal ----------------------------------------------------------------------------------------------Port Port Line Alarm Running Bind Status Profile Profile Operation Status -----------------------------------------------------------0 Activated 1 1 Normal Normal 1 Activated 2 1 Normal Normal 2 Activating 2 1 Normal Normal 3 Activated 5 1 Normal Normal 4 Activating 3 1 Normal Normal 5 Activating 5 1 Normal Normal ---- More ( Press 'Q' to break ) ---HWE_03_LOSVILOS(config)#interface shl 0/2 // ingresa al slot 2 HWE_03_LOSVILOS(config-if-shl-0/2)#deactivate 1 // desactiva la puerta 1 del slot 2 HWE_03_LOSVILOS(config-if-shl-0/2)# Succeed to deactive port 1 HWE_03_LOSVILOS(config-if-shl-0/2)#activate 1 // activa la puerta 1 del slot 2 { <cr>|profileIndex<U><1,99> }:2 // se ingresa el perfil de velocidad 2 (line profile) Command: activate 1 2 HWE_03_LOSVILOS(config-if-shl-0/2)# Port 1 activation command has been sent successfully
Ejemplo 2: HWE_03_LAFLORIDA SLOT 2 PUERTA 0 IP NODO: 150.150.151.83 [soporte@telsa ]$ telnet 150.150.151.83 Huawei MA5103 Multi-service Access Module. Copyright(C) 1998-2005 by Huawei Technologies Co., Ltd. >>User name: ehdata >>User password: ehdata HWE_03_LAFLORIDA>enable HWE_03_LAFLORIDA#configure terminal HWE_03_LAFLORIDA(config)#show board 0/2 // muestra el estado de las puertas en el slot 2 -----------------------------------Board Name : H513ADCE Board Status : Normal ---------------------------------------------------------------------------------------------------Port Port Type Port Status Line Profile Alarm Profile ----------------------------------------------------------------0 ADSL Activated 4 1 // tipo de puerta adsl 1 ADSL Activating 8 1 2 ADSL Activating 8 1 3 ADSL Activated 3 1 4 ADSL Activating 3 1 5 ADSL Activating 1 1 ---- More ( Press 'Q' to break ) ---HWE_03_LAFLORIDA(config)#interface adsl 0/2 // ingresa al slot 2 HWE_03_LAFLORIDA(config-if-adsl-0/2)#deactivate 0 // desactiva la puerta 1 del slot 2 HWE_03_LAFLORIDA(config-if-adsl-0/2)# Deactivate port 0 successfully HWE_03_LAFLORIDA(config-if-adsl-0/2)# ! EVENT WARNING 2013-03-25 10:41:03 ALARM NAME :ADSL port deactivation PARAMETERS :Frame ID: 0, Slot ID: 2, Port ID: 0 // Este mensaje es una alarma indicando que se desactivo la puerta 0 del slot 2 HWE_03_LAFLORIDA(config-if-adsl-0/2)#activate 0 // activa la puerta 1 del slot 2 { <cr>|profile-index<L><1,102> }:4 Command: activate 0 4 HWE_03_LAFLORIDA(config-if-adsl-0/2)# Send the command to activate port 0 successfully HWE_03_LAFLORIDA(config-if-adsl-0/2)#exit HWE_03_LAFLORIDA(config)# ! EVENT WARNING 2013-03-25 10:41:41 ALARM NAME :ADSL Port activation PARAMETERS :Frame ID: 0, Slot ID: 2, Port ID: 0 // Este mensaje es una alarma indicando que se activo la puerta 0 del slot 2 Asistente tcnico Juan Carlos Flores MGC -PER
5. Reset de nodo HWE_05 Ejemplo 1 HWE_05_DURZUA slot 1 puerta 3 ip nodo 150.150.151.113 [soporte@telsa ]$ telnet 150.150.151.113 Trying 150.150.151.113... Connected to 150.150.151.113. Escape character is '^]'.
Huawei MA5105 Multi-service Access Module. Copyright(C) 1998-2005 by Huawei Technologies Co., Ltd. Current time is Tue 11:22:35, 2013/03/19. > User name (<20 chars): ehdata > Password (<20 chars): ehdata HWE_05_DURZUA>enable HWE_05_DURZUA#configure terminal HWE_05_DURZUA(config)#show board 0/1 // muestra el estado de las puertas en el slot 1 Frame Slot Board Type Board State Interface Type PVC Number ----- ------ ---------- ------------- --------------- -----------0 1 SHDSL Normal 7 // tipo de puerta shdsl ----- ------ ---------- ------------- --------------- -----------Port State LineProfileId AlarmProfileId Power-backoff Bind ---- --------------- ------------- -------------- ------------- ------1 Activating 3 1 Default Normal 2 Activating 1 1 Default Normal 3 Activated 3 1 Default Normal 4 Activating 3 1 Default Normal 5 Activating 2 1 Default Normal 6 Activating 3 1 Default Normal 7 Activating 3 1 Default Normal 8 Deactivated 3 1 Default Normal 9 Activating 1 1 Default Normal
HWE_05_DURZUA(config)#interface shdsl 0/1 // ingresa al slot 1 HWE_05_DURZUA(config-SHDSL-0/1)#deactivate 3 // desactiva la puerta 3 del slot 1 Deactive command send successfully. 2013/03/19 11:24:50 major SHDSL: Port deactivated(0/1/3) HWE_05_DURZUA(config-SHDSL-0/1)#activate 3 // activa la puerta 3 del slot 1 [<lineProfileIndex>]{1-20}:3 // Ingresa perfil de velocidad (line profile) Active command send successfully. HWE_05_DURZUA(config-SHDSL-0/1)#exit Asistente tcnico Juan Carlos Flores MGC -PER
Ejemplo 2: HWE_05_10AVENIDA-1_2 Slot 1 puerta 3 IP nodo: 150.150.151.55 [soporte@telsa ]$ telnet 150.150.151.55 Huawei MA5105 Multi-service Access Module. Copyright(C) 1998-2005 by Huawei Technologies Co., Ltd. Current time is Mon 14:30:00, 2013/03/25. > User name (<20 chars): ehdata > Password (<20 chars): ehdata HWE_05_10AVENIDA-1_2>enable HWE_05_10AVENIDA-1_2#configure terminal HWE_05_10AVENIDA-1_2(config)#show board 0/1 // muestra el estado de las puertas en el slot 1 Frame Slot Board Type Board State Interface Type PVC Number ----- ------ ---------- ------------- --------------- -----------0 1 ADLA Normal 12 ----- ------ ---------- ------------- --------------- -----------Port State LineProfileId AlarmProfileId ---- ------------ ------------- -------------1 Activating 10 1 2 Activating 2 1 3 Activated 2 1 // tipo de puerta adsl 4 Activating 2 1 5 Activating 2 1 6 Activating 6 1 7 Activating 10 1 8 Activating 2 1 --More(Enter: next line, spacebar: next page, any other key: quit)-HWE_05_10AVENIDA-1_2(config)#interface adsl 0/1 // ingresa al slot 1 HWE_05_10AVENIDA-1_2(config-ADSL-0/1)#deactivate 3 // desactiva la puerta 3 del slot 1 Deactive command send successfully. 2013/03/25 14:30:32 major ADSL: Port deactivated(0/1/3) HWE_05_10AVENIDA-1_2(config-ADSL-0/1)#activate 3 // activa la puerta 3 del slot 1 [<lineProfileIndex>]{1-33}:2 //ingresa perfil de velocidad (line profile) Active command send successfully. HWE_05_10AVENIDA-1_2(config-ADSL-0/1)#exit
RESUMEN DE COMANDOS
LEYENDA: SLOT: S PUERTA: P
RESETEAR NODO ZTE_XX_YY ZTE_XX_YY>enable Please input password: ehdata ZTE_XX_YY# config ZTE_XX_YY(config)# show interface S / P port-status ZTE_XX_YY(config)# interface adsl S / P ZTE_XX_YY(cfg-if-adsl- S / P)# shut ZTE_XX_YY(cfg-if-adsl- S / P)# no shut ZTE_XX_YY(cfg-if-adsl- S / P)# exit ZTE_XX_YY(config)# show interface S / P port-status RESETEAR NODO HWE_UA_XX HWE_UA_XX>enable HWE_UA_XX#config HWE_UA_XX(config)#display board 0/ S HWE_UA_XX(config)#interface adsl 0/ S HWE_UA_XX(config-if-adsl-0/ S)#deactivate P HWE_UA_XX(config-if-adsl-0/ S)# Deactivate port P successfully HWE_UA_XX(config-if-adsl-0/ S)#activate P profile-index (INGRESAR PERFIL DE VELOCIDAD) HWE_UA_XX(config-if-adsl-0/ S)# Activate port P successfully RESETEAR NODO HWE_03_XX EJEMPLO 1 HWE_03_XX>enable HWE_03_XX#configure terminal HWE_03_XX(config)#show board 0/ S HWE_03_XX(config)#interface adsl 0/ S HWE_03_XX(config-if-adsl-0/ S)#deactivate P HWE_03_XX(config-if-adsl-0/ S)# Deactivate port P successfully HWE_03_XX(config-if-adsl-0/ S)#activate P { <cr>|profile-index<L><1,102> }: INGRESAR EL LINE PROFILE Command: activate SLOT LINE PROFILE HWE_03_XX(config-if-adsl-0/ S)# Send the command to activate port P successfully HWE_03_XX(config-if-adsl-0/ S)#exit
EJEMPLO 2 HWE_03_XX>enable HWE_03_XX#configure Terminal HWE_03_XX(config)#show board 0/ S HWE_03_XX(config)#interface shl 0/ S HWE_03_XX(config-if-shl-0/ S)#deactivate P HWE_03_XX(config-if-shl-0/ S)# Succeed to deactive port P HWE_03_XX(config-if-shl-0/ S)#activate P { <cr>|profileIndex<U><1,99> }: SE INGRESA EL PERFIL DE VELOCIDAD Command: activate 1 SLOT HWE_03_XX(config-if-shl-0/ S)# Port P activation command has been sent successfully RESETEAR NODO HWE_05_XX EJEMPLO 1 HWE_05_XX>enable HWE_05_XX#configure terminal HWE_05_XX(config)#show board 0/ S HWE_05_XX(config)#interface shdsl 0/ S HWE_05_XX(config-SHDSL-0/ S)#deactivate P Deactive command send successfully. 2013/03/19 11:24:50 major SHDSL: Port deactivated(0/ S / P) HWE_05_XX(config-SHDSL-0/ S)#activate P [<lineProfileIndex>]{1-20}: INGRESAR EL PERFIL DE VELOCIDAD Active command send successfully. HWE_05_XX(config-SHDSL-0/ S)#exit EJEMPLO 2 HWE_05_XX>enable HWE_05_XX#configure terminal HWE_05_XX(config)#interface adsl 0/ S HWE_05_XX(config-ADSL-0/ S)#deactivate P Deactive command send successfully. 2013/03/25 14:30:32 major ADSL: Port deactivated(0/ S / P) HWE_05_XX(config-ADSL-0/ S )#activate P [<lineProfileIndex>]{1-33}: m INGRESAR EL PERFIL DE VELOCIDAD Active command send successfully. HWE_05_XX(config-ADSL-0/ S )#exit