Voie Libre international

The magazine for the narrow gauge railways enthusiast.

Voie Libre international1 min de lecture
Voie Libre International
PUBLISHER: Christian Fournereau - christianf@lrpresse.com/ EDITOR: François Fontana - francoisf@lrpresse.com /Consultants to THE EDITORIAL TEAM: Éric Fresné (ericf@lrpresse.com), Jean-Paul Quatresous / With assistance from: Yann Baude (yannb@lrpresse
Voie Libre international1 min de lecture
Editorial #105
Railway modelling is an incredibly rich hobby, offering its fans the widest range of choices. It is hard to compare the two layouts we review in this issue: one, hyper-realistic, is based on an in-depth historical and geographical study of the locati
Voie Libre international2 min de lecture
What’s New
REF. 3275 205 ALL-RED REF. 3275 218 RED WITH WHITE STRIPES PRICE OBSERVED: 115 TO 120€ Put into service in September 1971, therefore a little before the ABt 4151 to 4154 series, used with self-propelled vans Deh 4/4 51 to 55, these carriages d
Voie Libre international1 min de lecture
Narrow Planet : Change Of Address
Until recently, Narrow Planet designated both the narrow gauge scale model brand and the website where the models were sold, among many other ranges. To clarify things, the site has just changed names. Light Railway Stores is now accessible at the fo
Voie Libre international3 min de lecture
Scenery
This brand new company produces a range of 3D printed accessories, based on the UV resin technique. The models are extremely fine, and available either unpainted or painted. We selected a fine office set consisting of the desk, the armchair, the type
Voie Libre international1 min de lecture
Press Review
Christopher Down continues to tells us about his travels through 1965 France in issue 244 of the Industrial Railway Records. This time, he takes us on a tour of the standard gauge railways of Usinor in Denain and of the Variscourt sand quarries in th
Voie Libre international2 min de lecture
TRAMFABRIEK THE SMALL RAILCAR Freestyle, But Neatly Drawn!
The creation of this model was kicked off by a competition launched by the 009 Gazette. The suggestion was to design a railcar using body parts from an Ashover Light Railway carriage. Bob Telford proposed a project that the Tramfabriek team decided t
Voie Libre international1 min de lecture
Tribute
Jean-Claude Grancher has passed away. A great fan of narrow gauge and secondary railways, he was among the very first members of the GEMM association and part of the first team that organized the Expométrique show. Following on from a low-key debut,
Voie Libre international3 min de lecture
Jahnsbach Truer Than Life
The period modelled is the 1970s, the former railways of the ertswhile Saxon kingdom are now managed by the Deutsche Reichsbahn (DR). Closure of unprofitable lines is planned, but oil supplies from the Soviet Union are unpredictable, delaying such cl
Voie Libre international1 min de lecture
Narrow Gauge In Saxony
In 1877, the kingdom of Saxony decided to build a large secondary railway network in 75cm gauge, to complement the standard gauge network. Like elsewhere, the choice was dictated by financial constraints, as narrow gauge railways were cheaper to buil
Voie Libre international1 min de lecture
1 Lead Or Tin Tarpaulins
1 The basis of my load consists of 3D printed leftover parts. The poor condition of their surface is of no great importance. They will be covered by the tarpaulin, and they are used simply to give a general shape to the load. 2 A lead sheet is trac
Voie Libre international1 min de lecture
4 Carrying Everything
A standard load of logs at Rasca in Romania on 17 August 1992. ■
Voie Libre international1 min de lecture
3 3d Printed Loads
13D design proper simply consists in defining a single model stack. My own is 3cm long and 4mm high. It allows me to generate an .STL file that will enable me to make loads for all my open wagons, irrespective of their dimensions. 2 Creating the pr
Voie Libre international1 min de lecture
5 Loads
1 Sold for ca. 9 euros, each pouch contains 10 identical objects. Cast in translucid plastic, they are supplied painted. Besides the milk churns and drums we review here, the range comprises barrels and various other more modern items. 2 The milk c
Voie Libre international1 min de lecture
6 A Container For A Flat Wagon
1 The Joswood crate ref. 40195 consist of planks, engraved and laser-cut. The outside cladding is engraved in coloured card, with surface paint. 2 The decorated cladding is assembled around the inside structure. 3 The card is weathered to look li
Voie Libre international1 min de lecture
7 Loading A Road Vehicle
Photographed at Capolago on the Rhaetian Railways, on 21 Octobrer 1975, this bogie flat wagon is carrying a road crane. The cab of the crane has been lowered to avoid fouling the loading gauge, the vehicle is blocked with wooden chocks and even, behi
Voie Libre international1 min de lecture
8 Opening The Doors Of A Box Van
I quickly fell for this motley load! The desk, the armchair, the couch, the boxes and baskets, nothing is missing. There is even a goat. My own removal will call upon a box van. 1 I chose an REE CFD wagon. First step: carefully un-glue the various
Voie Libre international1 min de lecture
2 A Load Of Bricks
1 Filling the wagon completely is out of the question. One layer of bricks is enough. I cut out a rectangle of soft card to fit inside the wagon body. 2 This is the most tedious phase of the job. On a bed of Cléocol adhesive, I fix the bricks next
Voie Libre international4 min de lecture
How To Easily Paint And Weather YOUR ROLLING STOCK
I'm no different from many modellers. While scratchbuilding or assembling kits of all shapes and sizes never puts me off, painting and its many phases and methods is always the source of some anguish… So I tend to postpone the job and unpainted parts
Voie Libre international1 min de lecture
The Products Used
• Standard acrylic paints or Prince August or Vallejo «Air» ranges for customary shades • “AVF series” AK Interactive paints for “historical” military shades • Vallejo Wash: European earth and rust • Vallejo “European” thick mud and splash mud •
Voie Libre international2 min de lecture
A PANHARD RAILCAR FROM THE TLC NETWORK Pressing on the gas pedal!
Between the Wars, Panhard and other builders used to offer motors adapted to lean gas, as well as generators – known as producer gas units – a technology they were familiar with. On the Tramways du Loir-et-Cher network, delivery of such Panhard units
Voie Libre international2 min de lecture
Rejuvenating AN ANCIENT EGGER-BAHN
This small project was motivated by the release of the Tramfabriek motor upgrade kit for the Egger-Bahn chassis. I had a tractor lying around, and I was keen to get it to run properly. But before reaching that stage, a bit of work was required! Web
Voie Libre international1 min de lecture
Supplies Required
Various brass strips (2 x 1mm U or H, 3mm flat or 3 x 1mm L, brass wire, various tubes) A piece of hardwood 3 x 3mm balsa or samba wood Leftovers from kits (washers, railings…) Round Romford bearings (2 x 2mm) Micro-modèle axles ref. PE JR 097 Cyano
Voie Libre international1 min de lecture
MinitrainS Track
Short straight track ref. 9301 x 7 Short curved track ref. 9302 x 3 Straight isolation track ref. 9304 x 6 Short straight track ref. 9313 x 2 Long straight track ref. 9311 x 2 Long curved track ref. 9321 x 8 Left-hand turnout ref. 9306 x 1 Right-hand
Voie Libre international2 min de lecture
My Billard tank wagon TRUE TO LIFE
This tank wagon never emerged from the Billard works… but it will from my own! Christophe Menier published several Billard drawings on the Loco-Revueforum, including wagon. I am grateful to him! As usual, this construction project aims at being simpl
Voie Libre international1 min de lecture
Operations, Processing, Shipment
This is a small layout, just 62 x 48cm. Closed on one of its long sides, it offers different veiwpoints on the other three. On the first small side, operations take place at an altitude of 10cm. This is where the precious logs are loaded onto wagons.
Voie Libre international1 min de lecture
Make Your Own Acrylic Wash
If you cannot find what you need in the range of Vallejo washes, there’s nothing to prevent you from making your own acrylic wash. My approach consists in mixing equal parts of matt acrylic medium and demineralised water, to which are added a few dro
Voie Libre international4 min de lecture
A WHOLE Laser-cut Layout!
For many years I have been using 2D drawing software (Canvas X) to draw my cutting patterns. These patterns are glued onto plastic sheet before cutting out my parts in the conventional manner. I had never before used a blade or laser cutter, not even
Voie Libre international3 min de lecture
DOWN BY THE RIVERSIDE The Valley Floor Mills
We are invited to witness the birth of his very first diorama. A grain mill in the Western USA. He describes its design and construction, cleverly blending traditional and more innovative techniques. I hand the keyboard over to him. Gilbert Gribi: H
Voie Libre international4 min de lecture
Tomme Cheese By The Sea Insular Maturing
François Fontana: Hallo Daniel, “Tomme de Mer” [“Tomme cheese by the Sea”] is a truly weird name for a layout. Can you explain? Daniel Jünger: This layout, and its background story are a fiction I developed on the basis of many small things, person

Voie Libre international

Plus de numéros de Voie Libre international