0 SPECIFICIATION FOR STANDARD SIZES

OaoDO EN 10255:2004+A1 :2007 FOR

0000 BLACK AND HOT DIPPED GALVANIZED STEEL PIPES.

SIZE OD (SPECIFIED) WALL WEIGHT OF TUBE(Kg/Mtr) PRESSURE

TUBE
INCH NB MIN MAX THICKNESS(MM) BLACK SIS BAR
1/2" 15 21.0 21.7 2.3 1.08 1.09 50
3/4" 20 26.4 27.1 2.3 1.40 1.41 50
1" 25 33.2 34.0 2.9 2.20 2.22 50
1 1/4" 32 41.9 42.7 2.9 2.82 2.85 50
T 1 1/2" 40 47.8 48.6 2.9 3.25 3.29 50
y
p 2" 50 59.6 60.7 3.2 4.51 4.58 50
E 2 1/2" 65 75.2 76.0 3.2 5.75 5.87 50

L 3" 80 87.9 88.7 3.2 6.76 6.93 50

3 1/2" 90 100.3 101.2 3.6 8.70 8.88 50
4" 100 113.0 113.9 3.6 9.83 10.1 50
5" 125 138.5 140.8 4.5 15.00 15.5 50
6" 150 163.9 166.5 4.5 17.80 18.4 50
1/2" 15 21.0 21.7 2.3 1.08 1.09 50
3/4" 20 26.4 27.1 2.3 1.39 1.40 50

T 1" 25 33.2 34.0 2.9 2.20 2.22 50

y 1 1/4" 32 41.9 42.7 2.9 2.82 2.85 50
p
1 1/2" 40 47.8 48.6 2.9 3.24 3.28 50
2" 50 59.6 60.7 3.2 4.49 4.56 50
L1 2 1/2" 65 75.2 76.3 3.2 5.73 5.85 50
3" 80 87.9 89.4 3.6 7.55 7.72 50
4" 100 113.0 114.9 4.0 10.80 11.1 50
T 1/2" 15 21.0 21.4 2.0 0.947 0.956 50
y
3/4" 20 26.4 26.9 2.3 1.38 1.39 50
 0 SPECIFICIATION FOR STANDARD SIZES
OaoDO EN 10255:2004+A1 :2007 FOR
0000 BLACK AND HOT DIPPED GALVANIZED STEEL PIPES.

p 1" 25 33.2 33.8 2.6 1.98 2.00 50

1 1/4" 32 41.9 42.5 2.6 2.54 2.57 50
L2 1 1/2" 40 47.8 48.4 2.9 3.23 3.27 50
2" 50 59.6 60.2 2.9 4.08 4.15 50
2 1/2" 65 75.2 76.0 3.2 5.71 5.83 50
3" 80 87.9 88.7 3.2 6.72 6.89 50
4" 100 113.0 113.9 3.6 9.75 10.00 50
1/2" 15 21.1 21.8 2.6 1.21 1.22 50
3/4" 20 26.5 27.3 2.6 1.56 1.57 50
1" 25 33.3 34.2 3.2 2.41 2.43 50

M 1 1/4" 32 42.0 42.9 3.2 3.1 3.13 50

E 1 1/2" 40 47.9 48.8 3.2 3.56 3.6 50
2" 50 59.7 60.8 3.6 5.03 5.1 50
2 1/2" 65 75.3 76.6 3.6 6.42 6.54 50
M 3" 80 88.0 89.5 4.0 8.36 8.53 50
4" 100 113.1 115.0 4.5 12.2 12.5 50
5" 125 138.5 140.8 5.0 16.6 17.1 50
6" 150 163.9 166.5 5.0 19.8 20.4 50
H 1/2" 15 21.1 21.8 3.2 1.44 1.45 50
3/4" 20 26.5 27.3 3.2 1.87 1.88 50
V 1" 25 33.3 34.2 4.0 2.93 2.95 50
1 1/4" 32 42.0 42.9 4.0 3.79 3.82 50
1 1/2" 40 47.9 48.8 4.0 4.37 4.41 50
2" 50 59.7 60.8 4.5 6.19 6.26 50
 0 SPECIFICIATION FOR STANDARD SIZES
OaoDO EN 10255:2004+A1:2007 FOR
0000 BLACK AND HOT DIPPED GALVANIZED STEEL PIPES.

2 1/2" 65 75.3 76.6 4.5 7.93 8.05 50

3" 80 88.0 89.5 5.0 10.3 10.5 50
4" 100 113.1 115.0 5.4 14.5 14.8 50
5" 125 138.5 140.8 5.4 17.9 18.4 50
6" 150 163.9 166.5 5.4 21.3 21.9 50

TOLERANCE

1.0UTSIDE DIAMETER. : As per the above Table

2. STRAIGHTNESS : Straightness shall not exceed 0.002 L.

3. MASS : ± 7.5 % on bundles of 10 tons or more, for Mand H series and Type L

: + 10% -8% on indivisual tubes for Types L 1 and L2.

4. THICKNESS : ± 10 % for Mand H series & Type L

: -8% with the plus tolerance limited by the mass tolerance, for Types L 1 and L2.

5. ENDS : Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.

6. CHEMICAL COMPOSITION : % Max: C - 0.20%, Mn - 1.40%, S - 0.03% & P - 0.035%

7. MECHANICAL PROPERTIES : UTS - 320 to 520 N/mm2, YS - 195 N/mm2 (minimum) & %EL- 20 (minimum).
 0 SPECIFICIATION FOR STANDARD SIZES
OaoDO
0000 EN 10255:2004+A1:2007 FOR
BLACK AND HOT DIPPED GALVANIZED STEEL PIPES.

: The flatteninq !est shall be appl_ied to bare tubes with specified outside diameter qr:_eater than 60.3mm.
0 °
Welded tubes shall be flattened with the weld placed alternately at o or 90 to the direction of the Flattening
8. FLATTENING TEST force.
: For Weld Test - Flatten up to 75% of original tube OD.No cracks in the weld.
: For Material other than Weld-Flatten up to 60% of original tube OD. No cracks in the metal other than in the
weld.

: Bend test up to 60.3mm OD. Radius at the bottom of the groove of the former shall be as per below table . The
9. BEND TEST tubes shall show no cracks visible without magnifying aids.

Diameter (D) 21.3 26.9 33.7 42.4 48.3 60.3

Bending
65 85 100 150 170 220
Radius

10. LEAK TIGHTNESS TEST a) :On line NDT(Eddy Current)

b) :Hydro testing at pressure as per above table and holding time min. 5 Second.

11. ZINC COATING : As per EN 10240A 1

12. THREADING : For 1/2" to 3/4" - 14 TPI and from 1" to 6" - 11 TPI

Check with standard ring and plug gauges.

13. MARKING
 0 SPECIFICIATION FOR STANDARD SIZES
OaoDO
0000 EN 10255:2004+A1 :2007 FOR
BLACK AND HOT DIPPED GALVANIZED STEEL PIPES.

14.PACKING Hexagonal Type

15.COLOR COADING For Type L --- Green

For Type L 1 --- White

For Type L2----Brown

For He avy------ Red

For Medium---------Blue
16. MILL TEST CERTIFCATE