Montabert Tabancalar Birleştirilmiş Katologlar

86594256
E MONTABERT -- Item
A PERCUSSION PART PARTIE FRAPPEUR
A
B CENTRAL PART PARTIE CENTRALE
C HYDRAULIC STOP BUTÉE HYDRAULIQUE
D FRONT PART PARTIE AVANT
D
Item CPN Qty
E MONTABERT -- 2003
230 220 PERCUSSION PART PARTIE FRAPPEUR

10 86374030 1 Body Corps
130 20 86385119 1 Body including : Corps comprenant :
30 86264678 1 ( Helicoil thread UNF 3/4” ( Filet hélicoïl UNF 3/4”
40 86374055 2 Cover Couvercle
210
S 50 86376191 2 O’ring Joint torique
120 260 60 86564994 2 Diaphragm Membrane
70 86241403 2 BS ring Bague BS
150 270
80 86265048 2 Inflating screw Vis de gonflage
160 250
90 86223419 1 Pin Axe lisse
240 S 100 86265071 5 O’ring Joint torique
170
190 S 120 86570447 7 Tight seal Joint d’étanchéité
200 130 86313228 4 UNF 3/4”, socket head screw Vis CHc UNF 3/4”
140 86323672 1 Cylinder Cylindre
150 86333697 1 Distributor Distributeur
160 86333713 1 Thrust piston Cyl. E Piston de poussée Cyl. E
80 170 1 Strike piston Piston de frappe
86578580
70
50 30
40 Distribution Distribution
60
90 140 S 200 86326493 1 O’ring Joint torique
210 86250867 1 UNF 3/4”, socket head screw Vis CHc UNF 3/4”
100 220 86333267 1 Plug Bouchon fileté
120 240 86223914 1 Distribution cover Couvercle de ditribution
120 250 86220944 1 Valve Clapet
100 260 86220951 1 Push rod Poussoir
270 86220969 1 Lining Chemise de poussoir
10
100
110
1.2
1.3
Item CPN Qty
E MONTABERT -- 2003
Ø 45 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
20 86373115 2 ( Helicoil thread UNF 1”1/8 ( Filet hélicoïl UNF 1”1/8
130
K 30 86220274 5 O’ring Joint torique
100 40 4 UNF 3/4”, hexa. screw Vis UNF 3/4”
86223443
90
50 86222882 4 Nut Ecrou
30 60 1 Gear including : Pignon récepteur comprenant :
86511466
10 80 70 1 ( Splined nut ( Ecrou cannelé
86511441
20 70 80 1 ( Snap ring ( Jonc
50 86220779
60 90 86221116 1 Ring Rondelle de butée
110 100 86221595 1 Needle bearing Roulement à aiguilles
110 86221678 1 Ring Rondelle de butée
120 86313129 1 Gear Pignon moteur
130 86223021 1 Needle bearing Roulement à aiguilles
210 220 140 86607942 1 Housing Boîtier avant
K 150 86223286 1 Tight seal Joint d’étanchéité
40 30 160 Unused position Repère non utilisé
140 K 190 1 O’ring Joint torique
86578705
240
210 86339272 1 Rear lining Chemise arrière
170
230 K 220 86220746 2 Seal Joint
230 86339058 1 Front lining Chemise avant
250 180
K 240 86223922 2 Lip seal Joint à lèvres
150 K 250 86223930 1 Lip seal Joint à lèvres

200
190
Item CPN Qty
E MONTABERT -- 2003
Ø 45
260 86223716 2 Gudgeon Goujon
270 86271558 2 Nut Ecrou
280 86352408 1 Retainer Décaleur
300 86512464 1 Front guide including : Guide avant comprenant :
310 86511490 1 ( Guiding ring ( Bague de guidage
320 86243672 1 ( Snap ring ( Jonc
280
K 360 86578671 1 seal Joint
290 S 370 86375870 1 Ball Bille

S 380 86220480 1 Spring Ressort
390 390 86220563 1 Shank male Ø 45, T45 Emmanchement Ø 45, T45
340
360
370
380
260
350
330
300
310 270
320
1.4
1.5
Item CPN Qty
E MONTABERT -- 2003
310 300
E HYDRAULIC STOP BUTÉE HYDRAULIQUE
270
10 86475001 1 Thrust housing including : Carter de butée comprenant :
310
270 20 86264678 4 ( Helicoil thread UNF 3/4” ( Filet hélicoïl UNF 3/4”
270 280
30 86230059 1 Oiler Graisseur
250 40 86223419 1 Pin Axe lisse
310 300
280 60 2 Valve Clapet
86322518
300 70 S 70 86570447 3 Tight seal Joint d’étanchéité
320 60 260 S 80 86349982 1 Face seal Joint de face
330 110 86578622 1 Front lining Chemise de butée avant
10 300 70 120 1 Rear lining Chemise de butée arrière
30 86611621
S 130 86220936 2 Composite seal Joint composite
50 80 40 140 1 Snap ring Jonc
86220258
150 86223948 1 Pin Axe lisse
20
160 86596871 1 Hydraulic stop piston Piston de butée
170 S 170 86581816 1 Seal Joint

340
S 180 86606050 1 Seal Joint
180 190 86345022 1 Guide Guide
S 200 86221652 1 Centering part Centreur
220 86223492 1 Shank stop Butée d’emmanchement
100
230 86220241 1 Ring Bague bronze
90 130
250 86313087 1 Shaft Arbre de transmission
160 260 86484755 1 Ball bearing Roulement à billes
140 270 86223435 3 Tight ring Bague d’étanchéité
110
280 86313095 2 Tight ring Bague d’étanchéité
150
190

S 320 86410396 2 Seal Joint
220
230
240 340 86501061 1 Restrictor Gicleur
Item CPN Qty
E MONTABERT -- 2003
10 ADAPTERS ADAPTEURS
P1 10 2 Adapter Adapteur
20 86321056
20 95219762 2 Adapter Adapteur
P2
BP
30
Drain
Pressu.
Air flushing
Injection d’air
20
1.6
1.7
Item CPN Qty
E MONTABERT -- 2003
CENTRAL PART PARTIE CENTRALE

10 86548195 1 Motor body including : Corps de moteur comprenant :
160 190 20 86221561 3 ( Guiding ring ( Bague de guidage
150 30 86223997 1 ( Snap ring ( Jonc
140 40 86264678 2 ( Helicoïl thread UNF 3/4” ( Filet hélicoïl UNF 3/4”
90 50 86223476 1 Spring Ressort
110
50 120 100 86220209 1 Shaft Arbre moteur
110 86344199 2 Distribution plate Platine de distribution
130 S 120 2 O’ring Joint torique
10 86261344
130 86318516 2 Pin Axe lisse
120 30 140 86223559 1 Ball bearing Roulement à billes
130 150 86344116 1 Bearing holder plate Plaque porte roulement
20 310 160 86313046 1 Nut Ecrou
40 290 170 86302841 1 Pin Goupille fendue
86313053
200 86344165 1 Cartridge (type 067) Cartouche moteur (type 067)
210 86223906 1 Slider Tiroir
230 220 1 Spring Ressort
86223427
240 280 300 S 230 1 O’ring Joint torique
86272374
210 270 S 240 1 O’ring Joint torique
250 86221926
220 260 250 86319407 1 Plug Bouchon
100 80 70
330 260 86332814 1 Slider Tiroir
320 340 280 1 Button Bouton d’entrainement
86312972
300 86312980 1 Pin Axe lisse
310 86220928 1 Ring Bague
320 86319969 1 Plug including : Bouchon comprenant :
S 330 86234994 1 ( O’ring ( Joint torique
S 340 86288131 1 BS ring Bague BS
Item CPN Qty
E MONTABERT -- 2003
40
FIXATION FIXATION
20 86220878 8 Spacer Bague
30 86220886 4 Nut Ecrou
40 86249265 1 Plug Bouchon
30 10 20 ACCESSORIES ACCESSOIRES
86607702 1 Seals package Pochette de joints

including : comprenant :
86606605 1 Seals package including : Pochette de joints comprenant :
( All parts marked S ( Toutes les pièces notées S
( All parts marked K ( Toutes les pièces notées K
1.8
N° 11644
09 / 2011
04
109E--- a043WQ38--- ML---

T
86646007
( Ø 38 --- T38 )
MAINTENANCE LEGEND
PARTS TO CHANGE
Depending on applications.
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Long term, only if damaged.
CAUTION
If drifter settings are incorrect, wear parts can be damaged prematurely.
If the drifter is used with deflated accumulators, premature damage can be caused to all parts.
These inspection intervals can vary depending on ground conditions, use of drifter.......
A PERCUSSION PART PARTIE FRAPPEUR 1.1
A B CENTRAL PART PARTIE CENTRALE 1.2
C HYDRAULIC STOP BUTÉE HYDRAULIQUE 1.3
D FRONT PART PARTIE AVANT 1.4
E ADAPTERS ADAPTEURS 1.5
Item Page
E MONTABERT -- 2011 Item CPN Qty
300 Nm 230 220 Percussion part Partie frappeur

220 ft.lb 10 86374030 1 LP Body Corps BP
300 Nm
506,7 mm mini
300 Nm 130 220 ft.lb
20 86385119 1 HP Body including: Corps HP comprenant :
19.95” mini
220 ft.lb 30 86264678 1 ( Helicoil thread UNF 3/4” ( Filet hélicoïl UNF 3/4”
150 270
250
160 90 86223419 1 Pin Axe lisse
170
37 Nm 150 86333697 1 Distributor Distributeur
80
27 ft.lb
30
160 86333713 1 Thrust piston Cyl. E Piston de poussée Cyl. E
70 170 86578580 1 Strike piston Piston de frappe
50 60 +
1400 Nm
40 Distribution Distribution
1035 ft.lb 180 86324738 1 Cover Couvercle

110 140 210 86250867 1 UNF 3/4”, socket head screw Vis CHc UNF 3/4”
100
220 86333267 1 Plug Bouchon fileté
20
120
240 86223914 1 Distribution cover Couvercle de ditribution
120 250 86220944 1 Valve Clapet
PARTS TO CHANGE
10
100 Every 100 hours.

Every 800 hours.
Every 1600 hours.
1.1
1.2
600 Nm
440 ft.lb Central part Partie centrale
150 10 86475746 1 Motor body including: Corps de moteur comprenant :
190
140 20 86221561 3 ( Guiding ring ( Bague de guidage
90 30 86223997 1 ( Snap ring ( Jonc
90 170 60 86220811 2 Needle bearing Roulement à aiguilles
110

100 86220209 1 Shaft Arbre moteur
10 130
40 130 130 86318516 2 Pin Axe lisse
150 86344116 1 Bearing holder plate Plaque porte roulement
20 160 86313046 1 Nut Ecrou
60 170 86302841 1 Pin Goupille fendue
220 86366242 1 Lining Chemise de tiroir
100 80 70
250 S 260 86288131 1 BS ring Bague BS
260
240 PARTS TO CHANGE 270 86312196 x Adjusting shim Rondelle de réglage
230
270 Depending on applications.
300 Nm Every 800 hours.

220 ft.lb Every 1600 hours.
280
290 Hydraulic stop Butée hydraulique
300 250 10 86475001 1 Thrust housing including: Carter de butée comprenant :
250
300 250 30 86655354 1 Oiler Graisseur
260
260 230
60 240 S 80 86616935 1 Face seal Joint de face
310
30 120 86611621 1 Rear lining Chemise de butée arrière

280
50 80 40 S 130 86611654 2 Composite seal Joint composite
140 86220258 1 Snap ring Jonc
300 Nm 150 86611639 1 Hydraulic stop piston Piston de butée
220 ft.lb S 160 86611662 1 Seal Joint
20
170 86345022 1 Guide Guide
160 S 190 86221645 1 Centering part Centreur
130 210 86220241 1 Ring Bague bronze
90
120 230 86313087 1 Shaft Arbre de transmission
240 86484755 1 Ball bearing Roulement à billes
PARTS TO CHANGE
170 S 300 86613254 2 Seal Joint
Every 100 hours.
190
Every 1600 hours.
220 7,3 mm mini 180
0.28” mini Long term, only if damaged.
1.3
1.4
10 mm maxi
0.39” maxi Fronthead Partie avant
Ø 38 10 86484771 1 Front guide Guide avant
S 30 86375870 1 Ball Bille
Ø 54 mm maxi S 40 86322583 1 Spring seat Siège de ressort
Ø 2.1“ maxi S 50 86220480 1 Spring Ressort
5 mm mini 60 86251840 1 Plug Bouchon
100
0.19” mini S 70 86223740 2 O’ring Joint torique
110
80 86223443 4 UNF 3/4” , screw Vis UNF 3/4 “
170 90 90 86222882 4 Nut Ecrou
140 300 Nm 100 86313129 1 Gear drive Pignon moteur
160 220 ft.lb 110 86223021 1 Needle bearing Roulement à aiguilles
120 86221116 1 Thrust washer Rondelle de butée
20
130
6,35 mm mini 150 86511474 1 Gear driven including : Pignon récepteur comprenant :
0.25” mini 120 70 160 86511458 1 ( Splined shank ( Ecrou cannelé
40 170 86220779 1 ( Snap ring ( Jonc
30 180 86645967 1 Shank retainer Douille de décaleur
60 190 86645959 1 Flushing nozzle including : Nez d’injection comprenant :

230
210 86223997 1 ( Snap ring ( Jonc
230
220 86313186 1 ( Packing ( Garniture
10 230 86307162 3 Lip seal Joint à lèvres
250 86310034 1 Shield Protection
240 80
180
220 PARTS TO CHANGE

Dia.>39 Every 1600 hours.
7/8” ---JIC
10 Adapters Adapteurs
P1A 1”5/16---JIC 10 86321056 2 Adapter Adapteur
P1R 20 20 95219762 1 Adapter Adapteur
40 30 86257979 2 Adapter Adapteur

BP 50 95279329 1 Adapter Adapteur
P2
3/4” ---JIC 1”1/16---JIC
30
Pressu.
Drain
Flushing
Injection
50 PARTS TO CHANGE
1”1/16---JIC Depending on applications.
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
1.5
1.6
40
Fixation Fixation
30 86220886 4 Nut Ecrou
For drifter delivered Pour perforateur livré

without shank sans emmanchement
86495363 1 Plastic plug (dia.38) Bouchon plastique (Ø 38)

30 10 20 86488475 1 Plastic plug (dia.45) Bouchon plastique (Ø 45)
500 Nm
368 ft.lb
Accessories Accessoires
86640299 1 Seals package including: Pochette de joints comprenant :

PARTS TO CHANGE
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Oil restrictor Gicleur réglable

40 20 86374964 1 Oil restrictor including : Gicleur réglable comprenant :
10 86374972 1 ( Tee piece ( Té
20 86374980 1 ( Adjusting screw ( Vis de réglage
30 86374998 1 ( Plug ( Bouchon
50 30 40 86249190 1 ( Nut ( Ecrou

50 86262656 1 ( O’ring ( Joint torique
10
PARTS TO CHANGE
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
1.7
www.montabert.com
203 , route de Grenoble

BP 671
69805 Saint--Priest Cedex
France
Latest CPN
ＨＣ Drifter model(per unit) Description (main seal kit) History of supercession from right to left
HC160 HC109R HC158R HC155R HC108R HC107R HC120R HC80R *Consist of 2 kit
← 86640075 ← 86633807 ← 86626892 ← 86616422

1 Seals kit 86644655 ↑
86606241
1 Seals package 86640307 ← 86617883
(1) ( Seals package) * 86640299 ← 86617875
(1) ( Seals package) * 86220613
1 Seals package 86640349 ← 86617891
(1) ( Seals package) * 86640331 ← 86617859
(1) ( Seals package) * 86220621
1 Seals package 86648094 ← 86640323 ← 86617891 ← 86607710 ← 86601721
(1) ( Seals package) * 86647435 ← 86640315 ← 86617859 ← 86606605 ← 86601705
(1) ( Seals package) * 86220621
1 Seals package 86640307 ← 86617867
(1) ( Seals package) * 86640299 ← 86617859
(1) ( Seals package) * 86220613
1 Seals package 86640281 ← 86617867 ← 86607702 ← 86601713
(1) ( Seals package) * 86640273 ← 86617859 ← 86606605 ← 86601705
(1) ( Seals package) * 86220613
1 Seals package 86648508 ← 86640265 ← 86623351
(1) ( Seals package) * 86647427 ← 86640232 ← 86621422 ← 86223773
(1) ( Seals package) * 86220621
1 Seals package 86648516 ← 86640257 86223989
(1) ( Seals package) * 86647427 ← 86640232 ← 86621422 ← 86223773
(1) ( Seals package) * 86220613
ECM-660III ECM-585MC Field retrofit ECM-660II ECM-580 ECM-580 ECM-660I ECM-580
(ECM-660III) CM-580 ECM-635 CM-580
XL635
Beige machine model
HC155RP
Before serial number 142714
including all model of "piston
Seals package 86640323
joints" for retrofitting
( Seals package) 86640315
HC155RP
After serial number 142714
HC160 HC109R HC158R HC155R HC120R HC108R HC107R HC80R
Interconnect Rotation
Independent Rotation
Number of accumulator High:1, Low:1 High:1, Low:1 High:2,Low:1 High:2,Low:1 High:2,Low:1 High:1,Low:1 High:1,Low:1 High:1,Low:1
Accessory size (STD) Without T 51 T 51 Without T 45 T 45
Shank diameter Ø 60 Ø 45 Ø 51 Ø 51 Ø 51 Ø 45 Ø 45 Ø 45
Damper (1st version) Damper (1st version)
(07/01) (10/03) Piston seal (Double, Old) Piston seal (Double, Old)
HC160 / 86599107 HC109R / 86620606
Damper (3rd version) HC120R / 86474236 HC80R / 86475647
T 38 86490646 86490638
Piston seal (single)
86566734 (09/99) 86566734 (09/99)
T 51 “E” -- 043
“E” -- 067 “E” -- 067
(12/02)
86610821
T 45 Changed damper (2nd version) Changed damper (2nd version)
Changed piston seal (Double, New) Changed piston seal (Double, New)
(03/00) (05/01)
Changed rotation motor HC155R / 86591948 HC107R / 86594256

Changed rotation seal Old model “E” -- 075 “E” -- 067
Changed Shank stop
(05/01)
(11/03) HC155R / 86596962
HC109R / 86622735 Old model “E” -- 067
Damper (3rd version) Changed damper (3rd version)
Piston seal (single) Changed piston seal (Single)
Without Shank Changed damper (3rd version)

(11/03) Changed piston seal (Single)
HC160 / 86622776 “E” -- 067
(ACKK called HC160/01) (01/05)
No more
Without Shank Latest HC155R / 86635208 manufactured
Without Shank “E” -- 067
No more (11/03)
manufactured HC108R / 86622750
Without Shank
(02/06) “E” -- 067
HC158R / 86648862
Without Shank
“E” -- 067
(06/06)
HC158R / 86654787
Without Shank
“E” -- 075
CPN 86715729
09 / 2010
00
T
HC50 S E 067 W B 38 M B
P
86712171
( Ø 38 --- T38 )
MAINTENANCE LEGEND
PARTS TO CHANGE
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
CAUTION
If drifter settings are incorrect, wear parts can be damaged prematurely.
If the drifter is used with deflated accumulators, premature damage can be caused to all parts.
These inspection intervals can vary depending on ground conditions, use of drifter.......
Item Page
E MONTABERT -- 2010
A DISTRIBUTION PART PARTIE DISTRIBUTION 1.1
B MOTOR PART PARTIE MOTEUR 1.2

A
C HOUSING ASSEMBLY PARTIE CARTER 1.3
D FRONT GUIDE Ø 38 GUIDE AVANT Ø 38 1.5
B
E ADAPTERS ADAPTEURS 1.6
F FIXATION FIXATION 1.7

C
F
D
E
20 10 Distribution Distribution
30
40 10 86343290 1 Cover Couvercle
50 D 20 86363595 1 O’ring Joint torique

300 Nm
220 ft.lb
40 86343274 1 Push rod liner Chemise de poussoir
70 50 86333879 1 Valve Clapet
80 60 86343217 1 Distribution cover Couvercle de distribution
90 70 86343225 1 Distribution box Boîte de distribution
90 86333846 1 Thrust piston “E” Piston de poussée “E”
100 86318516 1 Pin Axe lisse
D 120 86265071 2 O’ring Joint torique
22 Nm 130 NA 1 Energy chamber including : Réservoir d’énergie comp. :

16 ft.lb 130 140 86374014 1 ( Body ( Corps
190 150 86374055 2 ( Cover ( Couvercle
180 110 100
D 160 86376191 2 ( O’ring ( Joint torique
160
170 86633963 2 ( Diaphragm kit including : ( Kit membrane comprenant :
150 1400 Nm 180 86241403 1 -- BS ring -- Bague BS
1035 ft.lb
120 190 86265048 1 -- Inflating screw -- Vis de gonflage
140
200 86334034 4 Assembling screw (rear) Vis d’assemblage (arrière)
170
+
PARTS TO CHANGE
300 Nm Every 100 hours.
220 ft.lb
Every 400 hours.
Every 1600 hours.
1.1
1.2
170 150 160 190 130 120 110 Motor part Partie moteur
10 86333838 1 Striking piston Piston de frappe

190 20 86334299 1 Down cylinder Bas de cylindre
30 86386794 1 Motor body Corps de moteur
600 Nm 40 86223476 1 Spring Ressort
160 180 150 440 ft.lb 50 86223419 1 Pin Axe lisse
40
140 180
D 70 86570447 1 Tight seal Joint d’étanchéité
100 86249265 1 Plastic plug Bouchon plastique
70 20 10 D 120 86222668 1 O’ring Joint torique
130 86344116 1 Bearing holder plate Plaque porte roulement
210 240 90 100 D 160 86261344 2 O’ring Joint torique
170 86640117 1 Cartridge ( 067 cm3 ) Cartouche ( 067 cm3 )
200 334,7 mm mini

180 86318516 2 Pin Axe lisse
13.17” mini D 190 86221918 2 O’ring Joint torique
200 86334109 1 Thrust lining Chemise de butée
220 D 210 86238201 2 O’ring Joint torique
D 220 86300936 2 Rod joint Joint de tige
30 80 50 D 240 86334174 2 Lip seal Joint à lèvres
PARTS TO CHANGE
80 230 60 Depending on applications.
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
80 90 110 90 80 Housing assembly Partie carter
130 10 86386216 1 Complete housing including : Carter complet comprenant :

120
100 160 D 40 86570447 9 Tight seal Joint d’étanchéité
D 60 86334133 1 Centering part Centreur
140 70 86334125 1 Shank thrust Butée d’emmanchement
160 100 80 86323771 2 Tight ring Bague d’étanchéité
150
10 30 40 70 60
120 86323805 1 Seal holder ring Bague porte--joint
180 170 50 20 D 130 86322278 2 Lip seal Joint à lèvres
140 86323813 1 Shouldered ring including : Bague épaulée comprenant :
150 86322252 1 ( Self lubricating ring ( Bague autolubrifiante
170 86323953 1 Gear driving shaft Arbre de transmission
190 86334141 1 Gear driving including : Pignon récepteur comprenant :
200 86605920 1 ( Spline shank ( Ecrou cannelé
210
200
190 PARTS TO CHANGE
220
Every 100 hours.
Every 400 hours.
Every 800 hours.
7,2 mm mini Every 1600 hours.
0.28” mini
1.3
1.4
10 mm maxi
0.393” maxi
D 230 86288131 1 BS ring Bague BS
Ø 54 mm maxi 260 86366283 1 Spring Ressort
Ø 2.1“ maxi D 270 86234994 1 O’ring Joint torique
280 86234853 1 O’ring Joint torique
290 86312196 x Adjusting shim Rondelle de calage
300 86334166 1 Flange including : Flasque comprenant :
300
330
310 86256005 2 ( Helicoil thread UNF 1” ( Filet hélicoïl UNF 1”
270 280 D 340 86570447 1 Tight seal Joint d’étanchéité
350 95340659 4 Assembling screw Vis d’assemblage
320 340
250 240 290 260 230
350 310
300 Nm
300 Nm 220 ft.lb
220 ft.lb
PARTS TO CHANGE
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Front guide Guide avant

20 86259660 1 ( Elastic pin ( Goupille élastique
Ø 38 120
120
D 40 86220480 1 ( Spring ( Ressort
300 Nm
60
D 50 86375870 1 ( Ball ( Bille inox
220 ft.lb
50 D 60 86578671 1 ( Seal ( Joint
40 D 70 86570447 1 ( Tight seal ( Joint d’étanchéité
D 80 86668969 1 ( O’ring ( Joint torique
100 140 90 86307162 1 ( Lip seal ( Joint à lèvres
90
100 86607355 2 UNF 1”, hex. screw Vis H UNF 1”
110 86706827 1 Retainer chuck Douille de décaleur
130 110 120 86307162 2 Lip seal Joint à lèvres
80 130 86334240 1 Shield Protection
70
140 86619566 1 Male shank T 38 Emmanchement mâle T 38
150
20
30
PARTS TO CHANGE
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
1.5
1.6
Adapters Adapteurs
40
For water flushing Pour injection d’eau
20
10 95219747 1 Adapter ( P2 ) Adapteur ( P2 )
20 86321056 1 Adapter ( Flushing ) Adapteur ( Injection )
30
30 95219762 1 Adapter ( Return ) Adapteur ( Retour )
10
40 86257979 4 Adapter ( P1A -- P1R -- Adapteur ( P1A -- P1R --
Drain -- Pressurization ) Drain -- Pressurisation )
40 20 oil restrictor gicleur réglable

86374964 1 Oil restrictor including : Gicleur réglable comprenant :
10 86374972 1 ( Tee piece ( Té
50
30
30 86374998 1 ( Plug ( Bouchon
PARTS TO CHANGE
40 86249190 1 ( Nut ( Ecrou
Every 100 hours.
10 Every 400 hours.
Every 800 hours.
Every 1600 hours.
Fixation Fixation
10 86331105 2 UNF 3/4”, hex. screw Vis H UNF 3/4”
20 86241940 2 Spacer Entretoise
30 86222882 2 UNF 3/4”, hex. nut Ecrou H UNF 3/4”
10 accessories accessoires
20
D 86334281 1 Seals kit including : Pochette de rechange comp. :
( All parts marked D ( Toutes pièces notées D
30
438 Nm + graisse graphitée

322 ft.lb + graphite grease
PARTS TO CHANGE
Every 100 hours.
Every 400 hours.
Every 800 hours.
Every 1600 hours.
1.7
www.montabert.com
203, route de Grenoble

BP 671
69805 Saint ---Priest Cedex
France
86566718
E MONTABERT -- 2006 Item
A
D
Item CPN Qty
E MONTABERT -- 2006

10 86374030 1 Body Corps
210
150 270
160 250
170
80 160 86333713 1 Thrust piston Cyl. E Piston de poussée Cyl. E
50 60 + 30
40
Distribution Distribution
120 250 86220944 1 Valve Clapet
10
100
110
1.2
1.3
Item CPN Qty
E MONTABERT -- 2006

150 30 86223997 1 ( Snap ring ( Jonc
110
130
130 86318516 2 Pin Axe lisse
20 310 160 86313046 1 Nut Ecrou
86313053
86223427
240 280 300
210 270
220 260 250 86319407 1 Plug Bouchon
100 80 70
330 260 86332814 1 Slider Tiroir
86312972
300 86312980 1 Pin Axe lisse
310 86220928 1 Ring Bague
Item CPN Qty
E MONTABERT -- 2006
290 280
HYDRAULIC STOP BUTÉE HYDRAULIQUE
250 10 86345014 1 Thrust housing including : Carter de butée comprenant :
250 86264678
250 260 40 86223419 1 Pin Axe lisse
260 60 86322518 2 Valve Clapet
230
270 90 86220233 1 Lining Chemise de butée
300 S 100 86220936 2 Composite seal Joint composite
310 70 240 20 110 86220258 1 Snap ring Jonc
120 86223948 1 Pin Axe lisse
130 86333275 1 Hyd. stop piston including : Piston de butée comprenant :

10 150 86223997 1 ( Snap ring ( Jonc
140
S 160 86646429 2 Seal Joint
50 130
170 86345022 1 Guide Guide
30 200 86223492 1 Shank stop Butée d’emmanchement
90 86220241
100

80
170 S 300 86613254 2 Seal Joint
180
200
210
220
1.4
1.5
Item CPN Qty
E MONTABERT -- 2006
Ø 45 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
20 86373115 2 ( Helicoil thread UNF 1”1/8 ( Filet hélicoïl UNF 1”1/8
130
100 40 4 UNF 3/4”, hexa. screw Vis UNF 3/4”
86223443
90
50 86222882 4 Nut Ecrou
86511466
10 80 70 1 ( Splined nut ( Ecrou cannelé
86511441
20 70 80 1 ( Snap ring ( Jonc
50 86220779
40 30 160 Unused position Repère non utilisé
86222981
240
210 86339272 1 Rear lining Chemise arrière
170
230 K 220 86220746 2 Seal Joint
250 180

200
190
Item CPN Qty
E MONTABERT -- 2006
Ø 45
270 86271558 2 Nut Ecrou
320 86243672 1 ( Snap ring ( Jonc
280
K 360 86578671 1 seal Joint
290 S 370 86375870 1 Ball Bille

340
360
370
380
260
350
330
300
310 270
320
1.6
1.7
Item CPN Qty
E MONTABERT -- 2006
20 86321056
P2 30 86257979 2 Adapter Adapteur
BP
30
Pressu.
Drain
Air flushing
Injection d’air
20
Item CPN Qty
E MONTABERT -- 2006
40
FIXATION FIXATION
30 86220886 4 Nut Ecrou


1.8
Montabert S.A.S. www.montabert.com
BP 671
France
N˚ 11586
04/ 2005
01
86622750
A
D
Item CPN Qty
E MONTABERT -- 2005

10 86374030 1 Body Corps
210
150 270
250
160 90 86223419 1 Pin Axe lisse
170
50 60 + 30
40
120 250 86220944 1 Valve Clapet
10
100
110
1.2
1.3
Item CPN Qty
E MONTABERT -- 2005

150 30 86223997 1 ( Snap ring ( Jonc
110
130
130 86318516 2 Pin Axe lisse
20 310 160 86313046 1 Nut Ecrou
230 220 86223427 1 Spring Ressort
240 280 300
210 270
220 260 250 86319407 1 Plug Bouchon
100 80 70
330 260 86332814 1 Slider Tiroir
320 340 280 86312972 1 Button Bouton d’entrainement
300 86312980 1 Pin Axe lisse
310 86220928 1 Ring Bague
Item CPN Qty
E MONTABERT -- 2005
290 280
250
290
250
250 30 86230059 1 Oiler Graisseur

260
230 40 86223419 1 Pin Axe lisse
260 60 86322518 2 Valve Clapet
30
50 40
80
20
S 160 86611662 1 Seal Joint
170 86345022 1 Guide Guide
160 320
90 130

170 S 300 86613254 2 Seal Joint
190
180
320 86501061 1 Restrictor Gicleur
200
210
220
1.4
1.5
Item CPN Qty
E MONTABERT -- 2005
Ø 45 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
130 20 86373115 2 ( Helicoil thread UNF 1”1/8 ( Filet hélicoïl UNF 1”1/8
100 K 30 86220274 5 O’ring Joint torique
90 40 86223443 4 UNF 3/4”, hexa. screw Vis UNF 3/4”
30 50 86222882 4 Nut Ecrou

10 80 60 86511466 1 Gear including : Pignon récepteur comprenant :
20 70 70 86511441 1 ( Splined nut ( Ecrou cannelé

50
60
80 86220779 1 ( Snap ring ( Jonc
110
30
140 86607942 1 Housing Boîtier avant
40
160 200 86339272 1 Rear lining Chemise arrière
220
K 210 86220746 2 Seal Joint
240 170 220 86339058 1 Front lining Chemise avant
190 150
180
Item CPN Qty
E MONTABERT -- 2005
Ø 45 86223716
250 2 Gudgeon Goujon
260 86271558 2 Nut Ecrou
300 86243672 1 ( Snap ring ( Jonc
270 K 340 86578671 1 seal Joint
320
340
250
330
310
280
290 260
300
1.6
1.7
Item CPN Qty
E MONTABERT -- 2005
P1
20
BP
30
Pressu.
Drain
Air flushing
Injection d’air
20
Item CPN Qty
E MONTABERT -- 2005
40
FIXATION FIXATION
30 86220886 4 Nut Ecrou


30 10 20
ACCESSORIES ACCESSOIRES


1.8
Montabert S.A. www.montabert.com
BP 671
France
N˚11577
04 / 2005
rev 01
86622735
A
D
Item CPN Qty
E MONTABERT -- 2005

10 86374030 1 Body Corps
210
150 270
250
160 90 86223419 1 Pin Axe lisse
170
50 60 + 30
40
120 250 86220944 1 Valve Clapet
10
100
110
1.2
1.3
Item CPN Qty
E MONTABERT -- 2005
160 190 CENTRAL PART PARTIE CENTRALE

150 10 86475746 1 Motor body including: Corps de moteur comprenant:

90 30 86223997 1 ( Snap ring ( Jonc
110

130 100 86220209 1 Shaft Arbre moteur
10
130 130 86318516 2 Pin Axe lisse
20 160 86313046 1 Nut Ecrou
60 170 86302841 1 Pin Goupille fendue
100 80 70
250
260
240 270 86312196 x Adjusting shim Rondelle de réglage
230
270
210
220
Item CPN Qty
E MONTABERT -- 2005
290 280
250
290
250

260
230 40 86223419 1 Pin Axe lisse
260 60 86322518 3 Valve Clapet
30
50 40
80
20
S 160 86611662 1 Seal Joint
170 86345022 1 Guide Guide
160 320
90 130

170 S 300 86613254 2 Seal Joint
190
180
200
210
220
1.4
1.5
Item CPN Qty
E MONTABERT -- 2005
Ø 45 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
90
50 86222882 4 Nut Ecrou
30 60 86511466 1 Gear including : Pignon récepteur comprenant :
20 70
50 80 86220779 1 ( Snap ring ( Jonc
40 30 K 160 86578689 1 O’ring Joint torique

K 210 86220746 2 Seal Joint
160
220 220 86339058 1 Front lining Chemise avant

240
190 150
180
Item CPN Qty
E MONTABERT -- 2005
Ø 45 86223716
260 86271558 2 Nut Ecrou
300 86243672 1 ( Snap ring ( Jonc
K 340 86578671 1 seal Joint
270
320
340
250
330
310
280
290 260
300
1.6
1.7
Item CPN Qty
E MONTABERT -- 2005
P1A 10 86321056 2 Adapter Adapteur
P1R 20 20 95219762 2 Adapter Adapteur
40
Ret.
P2
30
Pressu.
Drain
Air flushing
Injection d’air
20
Item CPN Qty
E MONTABERT -- 2005
40
FIXATION FIXATION
30 86220886 4 Nut Ecrou


1.8
1.9
Item CPN Qty
E MONTABERT -- 2005
OIL RESTRICTOR GICLEUR RÉGLABLE

40 20 86374964 1 Oil restrictor including : Gicleur réglable comprenant :
10 86374972 1 ( Tee piece ( Té
30 86374998 1 ( Plug ( Bouchon
50 30 40 86249190 1 ( Nut ( Ecrou

10
BP 671
France
86566734

C
D
Item CPN Qty
E MONTABERT -- 2006
240 230
PERCUSSION PART PARTIE FRAPPEUR
10 86374030 1 Body Corps
140
20 86385135 1 Body Corps

130 270
160 280
170 260 70 86634003 3 Diaphragm kit Kit embrane
180 250 80 86241403 3 BS ring Bague BS
190 90 86265048 3 Inflating screw Vis de gonflage
86223419
210
S 130 86570447 10 Tight seal Joint d’étanchéité
90
80 70 +
40 150 86223971 1 Cylinder Cylindre
86223534
100
150
130 110 190 86324738 1 Cover Couvercle
100
110
20
130 250 86223914 1 Cover Couvercle de ditribution
110 260 86220944 1 Valve Clapet
110
120
1.2
1.3
Item CPN Qty
E MONTABERT -- 2006

150 30 86223997 1 ( Snap ring ( Jonc
110
130
130 86318516 2 Pin Axe lisse
20 310 160 86313046 1 Nut Ecrou
86313053
86223427
240 280 300
210 270
220 260 250 86319407 1 Plug Bouchon
100 80 70
330 260 86332814 1 Slider Tiroir
86312972
300 86312980 1 Pin Axe lisse
310 86220928 1 Ring Bague
Item CPN Qty
E MONTABERT -- 2006
290 280
250 10 86345014 1 Thrust housing including : Carter de butée comprenant :
250 86264678
250 260 40 86223419 1 Pin Axe lisse
260 60 86322518 2 Valve Clapet
230
270 90 86220233 1 Lining Chemise de butée
300 S 100 86220936 2 Composite seal Joint composite
310 70 240 20 110 86220258 1 Snap ring Jonc
120 86223948 1 Pin Axe lisse
130 86333275 1 Hyd. stop piston including : Piston de butée comprenant :

10 150 86223997 1 ( Snap ring ( Jonc
140
S 160 86646429 2 Seal Joint
50 130
170 86345022 1 Guide Guide
30 200 86223492 1 Shank stop Butée d’emmanchement
90 86220241
100

80
170 S 300 86613254 2 Seal Joint
180
200
210
220
1.4
1.5
Item CPN Qty
E MONTABERT -- 2006
Ø 51 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
30 50 86222882 4 Nut Ecrou

80
50
80 86220779 1 ( Snap ring ( Jonc
60
110
40 30
86222080
220
K 210 86220746 2 Seal Joint
240 170

190
180
Item CPN Qty
E MONTABERT -- 2006
Ø 51
260 86271558 2 Nut Ecrou
310 86235538 1 ( Snap ring ( Jonc
270
K 350 86578671 1 Seal Joint
280 S 360 86375870 1 Ball Bille

330
350
360
370
250
340
320
290
300 260
310
1.6
1.7
Item CPN Qty
E MONTABERT -- 2006
20 86321056
BP
30
Pressu.
Drain
Air flushing
Injection d’air
20
Item CPN Qty
E MONTABERT -- 2006
40
FIXATION FIXATION
30 86220886 4 Nut Ecrou


1.8
BP 671
France
CPN 86638525
04 / 2005
rev 10
86591948
86596962
86635208
A
B C HYDRAULIC STOP BUTÉE HYDRAULIQUE
D
Item CPN Qty
E MONTABERT -- 2005
240 230
140 10 86374030 1 Body Corps
20 86385135 1 Body Corps
130 270
160 280
180 250 80 86241403 3 BS ring Bague BS
200 100 86223419 2 Pin Axe lisse
210
90
80 70 +
60 160 86223534 1 Distributor Distributeur
100
150
130 110 190 86324738 1 Cover Couvercle
100
20
110 260 86220944 1 Valve Clapet
110 280 86417433 1 Lining Chemise de poussoir
120
1.2
1.3
Item CPN Qty
E MONTABERT -- 2005

150 30 86223997 1 ( Snap ring ( Jonc
90 170
110
130
130 86318516 2 Pin Axe lisse
20 310 160 86313046 1 Nut Ecrou
or/ou 86344157 1 Cartridge (type 075) Cartouche moteur (type 075)
230 210 86223906 1 Slider Tiroir
240 280 300 220 86223427 1 Spring Ressort
210 270
100 80 70
330 250 86319407 1 Plug Bouchon
320 340 270 86312964 1 Spring Ressort
280 86312972 1 Button Bouton d’entrainement
300 86312980 1 Pin Axe lisse
310 86220928 1 Ring Bague
Item CPN Qty
E MONTABERT -- 2005
290 280
250
290
250

260
230 40 86223419 1 Pin Axe lisse
260 60 86322518 2 Valve Clapet
10 280 70 120 86611621 1 Rear lining Chemise de butée arrière
30
50 80 40 140 86220258 1 Snap ring Jonc
20 S 160 86611662 1 Seal Joint
170 86345022 1 Guide Guide
160 320
90 130
110
140
170 S 300 86613254 2 Seal Joint
190
180
200
210
220
1.4
1.5
Item CPN Qty
E MONTABERT -- 2005
Ø 51 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
30 50 86222882 4 Nut Ecrou
10 80

50
60
80 86220779 1 ( Snap ring ( Jonc

30
40
220
K 210 86220746 2 Seal Joint
240 170

190
180
Item CPN Qty
E MONTABERT -- 2005
Ø 51 86223716
260 86271558 2 Nut Ecrou
300 86235538 1 ( Snap ring ( Jonc
270 K 340 86578671 1 seal Joint
350 86621596 1 Shank male Ø 51, T51 Emmanchement Ø 51, T51
350
320
340
250
330
310
280
290 260
300
1.6
1.7
Item CPN Qty
E MONTABERT -- 2005
P1
20
BP
30
Pressu.
Drain
Air flushing
Injection d’air
20
Item CPN Qty
E MONTABERT -- 2005
40
FIXATION FIXATION
30 86220886 4 Nut Ecrou


30 10 20


1.8
BP 671
France
CPN 86649118
03 / 2006
rev 00
86648862
A
B C HYDRAULIC STOP BUTÉE HYDRAULIQUE
D
Item CPN Qty
E MONTABERT -- 2006
240 230
10 86374030 1 Body Corps
140
20 86385135 1 Body Corps

130 270
160 280
180 250 80 86241403 3 BS ring Bague BS
86223419
210
90
80 70 +
86223534
100
150
130 110 190 86324738 1 Cover Couvercle
100
110
20
110 260 86220944 1 Valve Clapet
110
120
1.2
1.3
Item CPN Qty
E MONTABERT -- 2006

160 190 86548195
140 30 86223997 1 ( Snap ring ( Jonc
110
100 86220209 1 Shaft Arbre moteur
10 86344199
120 30 130 86318516 2 Pin Axe lisse
20 310 150 86344116 1 Bearing holder plate Plaque porte roulement
40 290 160 86313046 1 Nut Ecrou
170 86302841 1 Pin Goupille fendue
60
86223906
240 280 300 220 1 Spring Ressort
86223427
210 270
100 80 70
330 250 86319407 1 Plug Bouchon
86312964
280 86312972 1 Button Bouton d’entrainement
300 86312980 1 Pin Axe lisse
310 86220928 1 Ring Bague
Item CPN Qty
E MONTABERT -- 2006
290 280
290 86475001
250
260
230 40 86223419 1 Pin Axe lisse
260 60 86322518 2 Valve Clapet
10 280 70 120 86611621 1 Rear lining Chemise de butée arrière
30
50 80 40 140 86220258 1 Snap ring Jonc
20 S 160 86611662 1 Seal Joint
170 86345022 1 Guide Guide
160 320
86313087
120 86484755
110
140
170 S 300 86613254 2 Seal Joint
190
180
200
210
220
1.4
1.5
Item CPN Qty
E MONTABERT -- 2006
Ø 51 10 86221124 1
FRONT PART
Housing including :
PARTIE AVANT
Carter comprenant :
120
30 50 86222882 4 Nut Ecrou

80
50
80 86220779 1 ( Snap ring ( Jonc
60
110
40 30
86578713
220
K 210 86220746 2 Seal Joint
240 170

190
180
Item CPN Qty
E MONTABERT -- 2006
Ø 51
260 86271558 2 Nut Ecrou
300 86235538 1 ( Snap ring ( Jonc
270 K 340 86578671 1 seal Joint
320
340
250
330
310
280
290 260
300
1.6
1.7
Item CPN Qty
E MONTABERT -- 2006
20 86321056
BP
30
Pressu.
Drain
Air flushing
Injection d’air
20
Item CPN Qty
E MONTABERT -- 2006
40
FIXATION FIXATION
30 86220886 4 Nut Ecrou


30 10 20


1.8
CPN 86607223
08 / 2005
rev 11
86622776
E MONTABERT -- 2005 Item Page
A FRONT ASSEMBLY PARTIE AVANT 2
B ROTATION PART PARTIE ROTATION 3
C C REAR PLATE PLAQUE ARRIERE 5
D
D DISTRIBUTION DISTRIBUTION 6
E HYDRAULIC STOP BUTÉE HYDRAULIQUE 9
E
F ACCESSORIES ACCESSOIRES 11
A
Item CPN Qty
E MONTABERT -- 2005
A FRONT ASSEMBLY PARTIE AVANT

10 86396397 3 UNF 1”, nut Ecrou 1” UNF
20 86585452 1 Front guide Guide avant
S 30 86582616 2 Lip seal Joint à lèvres
50 86589827 1 Bushing Bague

130
80 86223419 1 Pin Goupille

90 90 1 Shank Emmanchement
110 Consult IR--MONTABERT Consultez IR--MONTABERT
140
120
60 100 86602364 1 Retainer Décaleur
20
10 110 86602372 1 RP body Corps FR
50
40
S 120 86588126 1 Lip seal Joint à lèvres
S 130 86588118 1 Rod seal Joint de tige
S 140 86602133 1 Rod seal Joint de tige
100
80
70
30
Item CPN Qty
E MONTABERT -- 2005
B ROTATION PART PARTIE ROTATION

70
80 10 86223419 1 Pin Goupille
90
110 100
130
140 30 86230240 1 M10, socket head screw Vis CHc M10
S 40 86241395 1 Tight ring Bague d’étanchéité
50 86589900 1 Gear shaft Axe de pignon
190 80 86620531 1 Hyd. motor C 315 including : Moteur C 315 comprenant :

180
200 90 96707195 6 ( M12, hexa. screw ( Vis H M12
210
50 100 86636123 1 ( O’ring ( Joint torique
60
110 86589918 1 Lining Chemise
S 120 86640067 1 Seal Joint
140 86577533 1 Ring Bague
150 86588373 1 Motor gear Pignon moteur
170 86577491 1 Needle thrust Butée à aiguilles
180 86589926 1 Inner lining Chemise intérieure

230
220 S 190 86640067 1 Seal Joint
150
160

10
40
30 220 86503638 1 Intermediate gear Pignon intermédiaire

Item CPN Qty
E MONTABERT -- 2005
240 86586286 1 Rotation housing Carter de rotation
260 86230240 1 M10, socket head screw Vis CHc M10
S 270 86241395 1 Tight ring Bague d’étanchéité
290 86589546 1 Rear bearing Palier arrière
310 86628880 1 Shank thrust Butée d’emmanchement
320 86599883 1 Ring Bague

260
250
240 340 86590155 1 Snap ring Jonc
290 350 86588357 1 Driven gear Pignon récepteur

310
320 360 86588365 1 Splined nut Ecrou cannelé
330
340
360 370 86589660 1 Ring Bague
350
380
390
390 86589678 1 Ring Bague
280
300
300
Item CPN Qty
E MONTABERT -- 2005
C REAR PLATE PLAQUE ARRIÈRE

70 60 50 10 95340659 9 UNF 3/4”, socket head screw Vis CHc 3/4” UNF
20 86586260 1 Rear plate Plaque arrière
90 30 86223419 1 Pin Goupille
10
20
30
40
Item CPN Qty
E MONTABERT -- 2005
D DISTRIBUTION DISTRIBUTION
100 10 86503224 1 Valve Clapet
170 20 86602430 1 Distribution box Boîte de distribution

180
60 86588522 1 Lining Chemise

160 70 86590064 1 Thrust piston Piston de poussée
80 86608841 4 UNF 7/8”, screw Vis 7/8” UNF

190
90 86605268 1 Main body including : Corps principal compr. :
30 100 86264678 9 ( Helicoïl thread UNF 3/4” ( Filet rapporté 3/4” UNF
70
120 130 86223419 1 Pin Goupille

110

10
20 200 86249265 1 Plastic plug Bouchon plastique
40
50
80
90
130
140
Item CPN Qty
E MONTABERT -- 2005
210 230
210 86590759 7 UNF 1/2”, socket head screw Vis CHc 1/2” UNF
240

280 S 240 86241403 1 BS ring Bague BS
+ 260
LP/BP 270 260 86581121 7 UNF 1/2”, socket head screw Vis CHc 1/2” UNF
270 86632445 1 Lid Couvercle

220 280 86634003 1 Diaphragm kit Kit membrane
290 290 86590122 1 Lower flange Flasque inférieur
300 300 86590056 1 Ring Bague
310 310 86223427 1 Spring Ressort

350
320 86312196 4 Washer Rondelle
320 360
330 86366259 1 Slide Tiroir
330 360 340 86590049 1 Lining Chemise
350
350 S 360 86588001 3 Back--up ring Bague anti--extrusion

360
Item CPN Qty
E MONTABERT -- 2005
390 370

410
440 S 400 86241403 1 BS ring Bague BS
HP 420
+
430 430 86422359 1 Lid Couvercle
440 86635620 1 Diaphragm kit Kit membrane
450 450 86590114 1 Lower flange Flasque inférieur

380
Item CPN Qty
E MONTABERT -- 2005
201 200 130 E HYDR. STOP BUTÉE HYDR.

10 86590072 1 Strike piston Piston de frappe
20 86588555 1 Guide lining Chemise guide
30 86609443 3 UNF 1”, gudgeon Goujon 1” UNF
50 86588977 1 Front thrust lining Chemise butée avant
S 60 86588068 2 Seal Joint
70 86602182 1 Thrust piston Piston de butée
S 80 86606068 1 Seal Joint

120 180 190 170
S 90 86588043 1 Seal Joint
10
20 100 86607363 1 Rear thrust lining Chemise butée arrière
110 86223419 1 Pin Goupille

110
120 86586294 1 Stop body including : Corps de butée comprenant :
30
60
140 86256005 3 ( Helicoïl thread UNF 1” ( Filet rapporté 1” UNF

150
140
90
80
50
40
Item CPN Qty
E MONTABERT -- 2005
210 86313392 1 T piece Té

210 220
230 86264256 1 Hose Flexible
240 86603966 1 Restrictor adapter (Ø 1,6 mm) Adapteur gicleur (Ø 1,6 mm)
240 230
Item CPN Qty
E MONTABERT -- 2005
F ACCESSORIES ACCESSOIRES
S 86640075 1 Seals kit including : Pochette de joints comp. :
( All parts marked S ( Toutes pièces notées S
Lubricating rotation Graissage de la rotation
86230059 1 Oiler Graisseur

86345931 1 Plastic plug Bouchon plastique

BP 671
France
Atlas Copco Overhaul kit
YH-70
Bring your rock drill back to perfect shape

• Saves money, compared to buying individual items
• One kit for servicing and overhauling your Yamamoto rock drill
• The overhaul kit is supplied in a practical box for shipping and easy handling at
the job site
One number for easier order handling and logistics
Atlas Copco Overhaul kit, is ordered by one number and includes all the parts needed for servicing and overhauling your rock drill
as per factory recommendations. The kit is an easy way to prevent unexpected breakdowns and improve the reliability.
Overhaul kit 500 impact hours

YH-70 Order no. 2653 2511 12*
Description
SEAL KIT
BLOW TUBE ASSY
BUSHING
CAP LINER
© Copyright 2009, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may
show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. © Atlas
The parts are stored in a solid wooden box,
for shipping and easy handling at the job site.
Overhaul kit 1500 impact hours Overhaul kit 3000 impact hours
YH-70 Order no. 2653 2511 20 YH-70 Order no. 2653 2511 38
Description Description
500 IMPACT HOURS OVERHAUL KIT 1500 IMPACT HOURS OVERHAUL KIT
MOTOR SEAL KIT PISTON
CHUCK VALVE GUIDE
FRONT LINER VALVE
NEEDLE BEARING CYLINDER BACK LINER
BALL BEARING BOLT ASSY
DU BUSHING CAP
GEAR SHAFT ORBIT MOTOR
CHUCK DRIVER
DRIVE GEAR
IDLER GEAR
CYLINDER LINER
Seal kit and tool kit*
Copco Rock Drills AB. 07.07 Örebro, Sweden
Seal kit
Order no. 2653 2515 00
Tool kit
Order no. 2653 2443 56
2009-01 Örebro, Sweden
*Supplied in a standard box

9851 2621 01
www.atlascopco.com
HC109R

• One kit for servicing and overhauling your Montabert rock drill
the job site

HC109R Order no. 2653 2506 92*
Description
SEAL KIT
DIAPHRAGM KIT
HELICOIL THREADS
GUIDE RING
THRUST
SNAP RINGS

HC109R Order no. 2653 2507 00 HC109R Order no. 2653 2507 18
SPLINE SHANK STRIKE PISTON
THROUGH BOLTS ROTATION SHAFTS
NUTS NEEDLE BEARINGS
SNAP RING BALL BEARINGS
BOLTS RINGS
SCREWS
Seal kit
Order no. 2686 6178 83
Tool kit
Order no. 2653 2508 41

9851 2619 01
www.atlascopco.com
HC158R

• One kit for servicing and overhauling your Montabert rock drill
the job site

HC158R Order no. 2653 2507 26*
Description
SEAL KIT
DIAPHRAGM KIT
HELICOIL THREADS
GUIDE RING
THRUST
SNAP RINGS

HC158R Order no. 2653 2507 34 HC158R Order no. 2653 2507 42
SPLINE SHANK STRIKE PISTON
THROUGH BOLTS ROTATION SHAFTS
NUTS NEEDLE BEARINGS
SNAP RING BALL BEARINGS
BOLTS RINGS
SCREWS SLIDER
SLIDER SPRING

Seal kit
Order no. 2686 6403 49
Tool kit
Order no. 2653 2508 41

9851 2620 01
www.atlascopco.com
YH-80

• One kit for servicing and overhauling your Yamamoto rock drill
the job site

YH-80 Order no. 2653 2511 79*
Description
SEAL KIT
BLOW TUBE ASSY
BUSHING
CAP LINER
YH-80 Order no. 2653 2511 87 YH-80 Order no. 2653 2511 95
MOTOR SEAL KIT PISTON
CHUCK VALVE GUIDE
FRONT LINER VALVE
NEEDLE BEARING CYLINDER BACK LINER
BALL BEARING BOLT ASSY
DU BUSHING CAP
GEAR SHAFT ORBIT MOTOR
CHUCK DRIVER
DRIVE GEAR
IDLER GEAR
Seal kit and tool kit* CYLINDER LINER
Seal kit
Order no. 2653 2515 18
Tool kit
Order no. 2653 2443 56

9851 2623 01
www.atlascopco.com
Latest CPN
ＨＣ Drifter model(per unit) Description (main seal kit) History of supercession from right to left
HC160 HC109R HC158R HC155R HC108R HC107R HC120R HC80R *Consist of 2 kit
← 86640075 ← 86633807 ← 86626892 ← 86616422

1 Seals kit 86644655 ↑
86606241
1 Seals package 86640307 ← 86617883
(1) ( Seals package) * 86640299 ← 86617875
(1) ( Seals package) * 86220613
1 Seals package 86640349 ← 86617891
(1) ( Seals package) * 86640331 ← 86617859
(1) ( Seals package) * 86220621
1 Seals package 86648094 ← 86640323 ← 86617891 ← 86607710 ← 86601721
(1) ( Seals package) * 86647435 ← 86640315 ← 86617859 ← 86606605 ← 86601705
(1) ( Seals package) * 86220621
1 Seals package 86640307 ← 86617867
(1) ( Seals package) * 86640299 ← 86617859
(1) ( Seals package) * 86220613
1 Seals package 86640281 ← 86617867 ← 86607702 ← 86601713
(1) ( Seals package) * 86640273 ← 86617859 ← 86606605 ← 86601705
(1) ( Seals package) * 86220613
1 Seals package 86648508 ← 86640265 ← 86623351
(1) ( Seals package) * 86647427 ← 86640232 ← 86621422 ← 86223773
(1) ( Seals package) * 86220621
1 Seals package 86648516 ← 86640257 86223989
(1) ( Seals package) * 86647427 ← 86640232 ← 86621422 ← 86223773
(1) ( Seals package) * 86220613
ECM-660III ECM-585MC Field retrofit ECM-660II ECM-580 ECM-580 ECM-660I ECM-580
(ECM-660III) CM-580 ECM-635 CM-580
XL635
Beige machine model
HC155RP
Before serial number 142714
including all model of "piston
joints" for retrofitting
HC155RP
After serial number 142714
HC160 HC109R HC158R HC155R HC120R HC108R HC107R HC80R
Interconnect Rotation
Independent Rotation
Number of accumulator High:1, Low:1 High:1, Low:1 High:2,Low:1 High:2,Low:1 High:2,Low:1 High:1,Low:1 High:1,Low:1 High:1,Low:1
Accessory size (STD) Without T 51 T 51 Without T 45 T 45
Shank diameter Ø 60 Ø 45 Ø 51 Ø 51 Ø 51 Ø 45 Ø 45 Ø 45
Damper (1st version) Damper (1st version)
(07/01) (10/03) Piston seal (Double, Old) Piston seal (Double, Old)
HC160 / 86599107 HC109R / 86620606
Damper (3rd version) HC120R / 86474236 HC80R / 86475647
T 38 86490646 86490638
Piston seal (single)
86566734 (09/99) 86566734 (09/99)
T 51 “E” -- 043
“E” -- 067 “E” -- 067
(12/02)
86610821
T 45 Changed damper (2nd version) Changed damper (2nd version)
Changed piston seal (Double, New) Changed piston seal (Double, New)
(03/00) (05/01)
Changed rotation motor HC155R / 86591948 HC107R / 86594256

Changed rotation seal Old model “E” -- 075 “E” -- 067
Changed Shank stop
(05/01)
(11/03) HC155R / 86596962
HC109R / 86622735 Old model “E” -- 067
Damper (3rd version) Changed damper (3rd version)
Piston seal (single) Changed piston seal (Single)
Without Shank Changed damper (3rd version)

(11/03) Changed piston seal (Single)
HC160 / 86622776 “E” -- 067
(ACKK called HC160/01) (01/05)
No more
Without Shank Latest HC155R / 86635208 manufactured
Without Shank “E” -- 067
No more (11/03)
manufactured HC108R / 86622750
Without Shank
(02/06) “E” -- 067
HC158R / 86648862
Without Shank
“E” -- 067
(06/06)
HC158R / 86654787
Without Shank
“E” -- 075

Montabert Tabancalar Birleştirilmiş Katologlar

Transféré par

Droits d'auteur :

Formats disponibles

Montabert Tabancalar Birleştirilmiş Katologlar

Transféré par

Informations du document

Titre original

Copyright

Formats disponibles

Partager ce document

Partager ou intégrer le document

Options de partage

Avez-vous trouvé ce document utile ?

Ce contenu est-il inapproprié ?

Droits d'auteur :

Formats disponibles

Montabert Tabancalar Birleştirilmiş Katologlar

Transféré par

Droits d'auteur :

Formats disponibles

86594256

A PERCUSSION PART PARTIE FRAPPEUR

C HYDRAULIC STOP BUTÉE HYDRAULIQUE

D FRONT PART PARTIE AVANT

230 220 PERCUSSION PART PARTIE FRAPPEUR

150 K 250 86223930 1 Lip seal Joint à lèvres

290 S 370 86375870 1 Ball Bille

170 S 170 86581816 1 Seal Joint

200 S 310 86292786 3 O’ring Joint torique

CENTRAL PART PARTIE CENTRALE

86607702 1 Seals package Pochette de joints

109E--- a043WQ38--- ML---

Every 100 hours.

Every 400 hours.

Every 800 hours.

Every 1600 hours.

Long term, only if damaged.

A B CENTRAL PART PARTIE CENTRALE 1.2

C HYDRAULIC STOP BUTÉE HYDRAULIQUE 1.3

D FRONT PART PARTIE AVANT 1.4

E ADAPTERS ADAPTEURS 1.5

300 Nm 230 220 Percussion part Partie frappeur

120 S 190 86265071 1 O’ring Joint torique

90 S 200 86326493 1 O’ring Joint torique

100 260 86220951 1 Push rod Poussoir

110 Every 400 hours.

50 180 S 80 86265071 1 O’ring Joint torique

120 S 90 86221918 2 O’ring Joint torique

300 Nm Every 800 hours.

30 120 86611621 1 Rear lining Chemise de butée arrière

60 190 86645959 1 Flushing nozzle including : Nez d’injection comprenant :

50 200 86605219 1 ( Guiding ring ( Bague de guidage

200 Every 100 hours.

210 Every 400 hours.

250 Every 800 hours.

40 30 86257979 2 Adapter Adapteur

BP 50 95279329 1 Adapter Adapteur

For drifter delivered Pour perforateur livré

86495363 1 Plastic plug (dia.38) Bouchon plastique (Ø 38)

86640299 1 Seals package including: Pochette de joints comprenant :

Oil restrictor Gicleur réglable

50 30 40 86249190 1 ( Nut ( Ecrou

203 , route de Grenoble

← 86640075 ← 86633807 ← 86626892 ← 86616422

Changed rotation motor HC155R / 86591948 HC107R / 86594256

Without Shank Changed damper (3rd version)

Every 100 hours.

Every 400 hours.

Every 800 hours.

Every 1600 hours.

Long term, only if damaged.

A DISTRIBUTION PART PARTIE DISTRIBUTION 1.1

B MOTOR PART PARTIE MOTEUR 1.2

C HOUSING ASSEMBLY PARTIE CARTER 1.3

D FRONT GUIDE Ø 38 GUIDE AVANT Ø 38 1.5

F FIXATION FIXATION 1.7

50 D 20 86363595 1 O’ring Joint torique

60 30 86343282 1 Push rod Poussoir

22 Nm 130 NA 1 Energy chamber including : Réservoir d’énergie comp. :