This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) cov... more This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) covered with fire retardant treated veneers. The beech (Fagus orientalis Lipsky) veneers were treated with either monoammonium phosphate, diammonium phosphate, lime water or a borax/boric acid (1:1 by weight) mixture. Physical and mechanical properties of the specimens were performed according to EN and DIN standards. A cone calorimeter was used to determine their combustion characteristics. The physical and mechanical properties of the specimens were adversely affected by the treatments. The specimens treated with lime water had the best physical performance while the specimens treated with borax/boric acid had the highest mechanical properties. The fire retardant treatments of the face veneers were effective in reducing the initial contribution of heat release to potential fire growth. In particular, the lime water treatment was an effective fire retardant treatment in that it reduced both the effective heat of combustion and the mass loss rate. It also delayed the times for sustained ignition. In dieser Studie wurden die physikalischen und mechanischen sowie die Brandeigenschaften von OSB mit Feuerschutzmittel imprägnierten Deckfurnieren untersucht. Die Buchenfurniere (Fagus orientalis Lipsky) wurden entweder mit Monoammoniumphosphat, Diammoniumphosphat, Kalkwasser oder einer Borax/Borsäure-Mischung (im Gewichtsverhältnis 1:1) imprägniert. Physikalische und mechanische Eigenschaften der Proben wurden nach EN- und DIN-Normen untersucht. Das Brandverhalten wurde mittels einer Cone-Calorimeter-Prüfung bestimmt. Die Imprägnierung wirkte sich auf die physikalischen und mechanischen Eigenschaften der Proben nachteilig aus. Die mit Kalkwasser imprägnierten Proben wiesen die besten physikalischen Eigenschaften auf, wohingegen die mit Borax/Borsäure imprägnierten Proben die besten mechanischen Eigenschaften hatten. Durch die Feuer hemmende Behandlung der Deckfurniere wurde die Wärmefreisetzung verzögert. Dabei erwies sich die Imprägnierung mit Kalkwasser als besonders wirksam, da sie sowohl die Gesamtwärmefreisetzung als auch die Masseverlustrate reduzierte. Daneben verzögerte sie auch den Entzündungszeitpunkt.
This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) cov... more This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) covered with fire retardant treated veneers. The beech (Fagus orientalis Lipsky) veneers were treated with either monoammonium phosphate, diammonium phosphate, lime water or a borax/boric acid (1:1 by weight) mixture. Physical and mechanical properties of the specimens were performed according to EN and DIN standards. A cone calorimeter was used to determine their combustion characteristics. The physical and mechanical properties of the specimens were adversely affected by the treatments. The specimens treated with lime water had the best physical performance while the specimens treated with borax/boric acid had the highest mechanical properties. The fire retardant treatments of the face veneers were effective in reducing the initial contribution of heat release to potential fire growth. In particular, the lime water treatment was an effective fire retardant treatment in that it reduced both the effective heat of combustion and the mass loss rate. It also delayed the times for sustained ignition. In dieser Studie wurden die physikalischen und mechanischen sowie die Brandeigenschaften von OSB mit Feuerschutzmittel imprägnierten Deckfurnieren untersucht. Die Buchenfurniere (Fagus orientalis Lipsky) wurden entweder mit Monoammoniumphosphat, Diammoniumphosphat, Kalkwasser oder einer Borax/Borsäure-Mischung (im Gewichtsverhältnis 1:1) imprägniert. Physikalische und mechanische Eigenschaften der Proben wurden nach EN- und DIN-Normen untersucht. Das Brandverhalten wurde mittels einer Cone-Calorimeter-Prüfung bestimmt. Die Imprägnierung wirkte sich auf die physikalischen und mechanischen Eigenschaften der Proben nachteilig aus. Die mit Kalkwasser imprägnierten Proben wiesen die besten physikalischen Eigenschaften auf, wohingegen die mit Borax/Borsäure imprägnierten Proben die besten mechanischen Eigenschaften hatten. Durch die Feuer hemmende Behandlung der Deckfurniere wurde die Wärmefreisetzung verzögert. Dabei erwies sich die Imprägnierung mit Kalkwasser als besonders wirksam, da sie sowohl die Gesamtwärmefreisetzung als auch die Masseverlustrate reduzierte. Daneben verzögerte sie auch den Entzündungszeitpunkt.
International Biodeterioration & Biodegradation, 2009
This study evaluated decay and termite resistance of thermally compressed pine wood panels under ... more This study evaluated decay and termite resistance of thermally compressed pine wood panels under pressure at either 5 or 7 MPa and either 120 or 150 °C for 1 h. Wood specimens from the panels were exposed to laboratory decay resistance tests by using the wood degrading ...
The objective of this study was to investigate the effects of press pressure and temperature on t... more The objective of this study was to investigate the effects of press pressure and temperature on the moisture content (MC), vertical density profile (VDP), and Janka hardness of solid wood panels (SWP) made of Pinus sylvestris. Panels with dimensions of 250 mm (width) by 500 mm (length) by 18 mm (thickness) were compressed at temperatures of 120 and 150°C using pressures of 50
This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) cov... more This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) covered with fire retardant treated veneers. The beech (Fagus orientalis Lipsky) veneers were treated with either monoammonium phosphate, diammonium phosphate, lime water or a borax/boric acid (1:1 by weight) mixture. Physical and mechanical properties of the specimens were performed according to EN and DIN standards. A cone calorimeter was used to determine their combustion characteristics. The physical and mechanical properties of the specimens were adversely affected by the treatments. The specimens treated with lime water had the best physical performance while the specimens treated with borax/boric acid had the highest mechanical properties. The fire retardant treatments of the face veneers were effective in reducing the initial contribution of heat release to potential fire growth. In particular, the lime water treatment was an effective fire retardant treatment in that it reduced both the effective heat of combustion and the mass loss rate. It also delayed the times for sustained ignition. In dieser Studie wurden die physikalischen und mechanischen sowie die Brandeigenschaften von OSB mit Feuerschutzmittel imprägnierten Deckfurnieren untersucht. Die Buchenfurniere (Fagus orientalis Lipsky) wurden entweder mit Monoammoniumphosphat, Diammoniumphosphat, Kalkwasser oder einer Borax/Borsäure-Mischung (im Gewichtsverhältnis 1:1) imprägniert. Physikalische und mechanische Eigenschaften der Proben wurden nach EN- und DIN-Normen untersucht. Das Brandverhalten wurde mittels einer Cone-Calorimeter-Prüfung bestimmt. Die Imprägnierung wirkte sich auf die physikalischen und mechanischen Eigenschaften der Proben nachteilig aus. Die mit Kalkwasser imprägnierten Proben wiesen die besten physikalischen Eigenschaften auf, wohingegen die mit Borax/Borsäure imprägnierten Proben die besten mechanischen Eigenschaften hatten. Durch die Feuer hemmende Behandlung der Deckfurniere wurde die Wärmefreisetzung verzögert. Dabei erwies sich die Imprägnierung mit Kalkwasser als besonders wirksam, da sie sowohl die Gesamtwärmefreisetzung als auch die Masseverlustrate reduzierte. Daneben verzögerte sie auch den Entzündungszeitpunkt.
This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) cov... more This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) covered with fire retardant treated veneers. The beech (Fagus orientalis Lipsky) veneers were treated with either monoammonium phosphate, diammonium phosphate, lime water or a borax/boric acid (1:1 by weight) mixture. Physical and mechanical properties of the specimens were performed according to EN and DIN standards. A cone calorimeter was used to determine their combustion characteristics. The physical and mechanical properties of the specimens were adversely affected by the treatments. The specimens treated with lime water had the best physical performance while the specimens treated with borax/boric acid had the highest mechanical properties. The fire retardant treatments of the face veneers were effective in reducing the initial contribution of heat release to potential fire growth. In particular, the lime water treatment was an effective fire retardant treatment in that it reduced both the effective heat of combustion and the mass loss rate. It also delayed the times for sustained ignition. In dieser Studie wurden die physikalischen und mechanischen sowie die Brandeigenschaften von OSB mit Feuerschutzmittel imprägnierten Deckfurnieren untersucht. Die Buchenfurniere (Fagus orientalis Lipsky) wurden entweder mit Monoammoniumphosphat, Diammoniumphosphat, Kalkwasser oder einer Borax/Borsäure-Mischung (im Gewichtsverhältnis 1:1) imprägniert. Physikalische und mechanische Eigenschaften der Proben wurden nach EN- und DIN-Normen untersucht. Das Brandverhalten wurde mittels einer Cone-Calorimeter-Prüfung bestimmt. Die Imprägnierung wirkte sich auf die physikalischen und mechanischen Eigenschaften der Proben nachteilig aus. Die mit Kalkwasser imprägnierten Proben wiesen die besten physikalischen Eigenschaften auf, wohingegen die mit Borax/Borsäure imprägnierten Proben die besten mechanischen Eigenschaften hatten. Durch die Feuer hemmende Behandlung der Deckfurniere wurde die Wärmefreisetzung verzögert. Dabei erwies sich die Imprägnierung mit Kalkwasser als besonders wirksam, da sie sowohl die Gesamtwärmefreisetzung als auch die Masseverlustrate reduzierte. Daneben verzögerte sie auch den Entzündungszeitpunkt.
International Biodeterioration & Biodegradation, 2009
This study evaluated decay and termite resistance of thermally compressed pine wood panels under ... more This study evaluated decay and termite resistance of thermally compressed pine wood panels under pressure at either 5 or 7 MPa and either 120 or 150 °C for 1 h. Wood specimens from the panels were exposed to laboratory decay resistance tests by using the wood degrading ...
The objective of this study was to investigate the effects of press pressure and temperature on t... more The objective of this study was to investigate the effects of press pressure and temperature on the moisture content (MC), vertical density profile (VDP), and Janka hardness of solid wood panels (SWP) made of Pinus sylvestris. Panels with dimensions of 250 mm (width) by 500 mm (length) by 18 mm (thickness) were compressed at temperatures of 120 and 150°C using pressures of 50
Uploads
Papers by Zeki Candan