Working on B450M Mortar Titanium

[4n4nk3]

Works on an MSI B450M Mortar Titanium but colors are inverted.

[Slater91]

I just tried it, but it seems like in my case it isn't working as expected: it seems to be stuck to white with some pulsating effect that gives it some vague colour, but I can't make it stick to a single colour. I'm using KDE neon on Linux 5.7.
This is the output when using the verbose option:
sudo msi-rgb 00000000 00000000 00000000 -b 0 -d 0 --verbose
Bank 12 (d0...100):
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e1 08 00 00 00 00 00 00 ff ff 11 00 00 20 01 40
00 00 00 00 00 00 00 00 00 00 00 00 0e 07 ff e2
Bank 09 (20...40):
d4 51 ff 00 00 00 40 10 00 ff 40 00 11 00 00 01
0f ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Bank 0b (60...70):
0a 20 0a 30 00 00 ff ff ff ff ff ff ff ff ff ff
Chip identifier is: d451

[Slater91]

Ok, so it seems this was already found and fixed in #92:
"It doesn't really, it only reacts if you invert the colours, and It pulses if you invert all 3, so here's a fudge:

msi-rgb 0 0 0 -ig -ib # gives red
msi-rgb 0 0 0 -ir -ig # gives blue
msi-rgb 0 0 0 -ir -ig # gives green

Just inverting two values causes it to set max for the other and doesn't then pulse."
I can confirm it works.