Fix lexing of standard multi-character operators in edge cases.

Commits c6b3c93 (which fixed the precedence of >=, <=, <> operators)
and 865f14a (which added support for the standard => notation for
named arguments) created a class of lexer tokens which look like
multi-character operators but which have their own token IDs distinct
from Op. However, longest-match rules meant that following any of
these tokens with another operator character, as in (1<>-1), would
cause them to be incorrectly returned as Op.

The error here isn't immediately obvious, because the parser would
usually still find the correct operator via the Op token, but there
were more subtle problems:

1. If immediately followed by a comment or +-, >= <= <> would be given
   the old precedence of Op rather than the correct new precedence;

2. If followed by a comment, != would be returned as Op rather than as
   NOT_EQUAL, causing it not to be found at all;

3. If followed by a comment or +-, the => token for named arguments
   would be lexed as Op, causing the argument to be mis-parsed as a
   simple expression, usually causing an error.

Fix by explicitly checking for the operators in the {operator} code
block in addition to all the existing special cases there.

Backpatch to 9.5 where the problem was introduced.

Analysis and patch by me; review by Tom Lane.
Discussion: https://postgr.es/m/87va851ppl.fsf@news-spur.riddles.org.uk

Author: RhodiumToad

src/backend/parser/scan.l

@@ -339,6 +339,15 @@ identifier		{ident_start}{ident_cont}*
 typecast		"::"
 dot_dot			\.\.
 colon_equals	":="
+
+/*
+ * These operator-like tokens (unlike the above ones) also match the {operator}
+ * rule, which means that they might be overridden by a longer match if they
+ * are followed by a comment start or a + or - character. Accordingly, if you
+ * add to this list, you must also add corresponding code to the {operator}
+ * block to return the correct token in such cases. (This is not needed in
+ * psqlscan.l since the token value is ignored there.)
+ */
 equals_greater	"=>"
 less_equals		"<="
 greater_equals	">="
@@ -929,6 +938,25 @@ other			.
 						if (nchars == 1 &&
 							strchr(",()[].;:+-*/%^<>=", yytext[0]))
 							return yytext[0];
+						/*
+						 * Likewise, if what we have left is two chars, and
+						 * those match the tokens ">=", "<=", "=>", "<>" or
+						 * "!=", then we must return the appropriate token
+						 * rather than the generic Op.
+						 */
+						if (nchars == 2)
+						{
+							if (yytext[0] == '=' && yytext[1] == '>')
+								return EQUALS_GREATER;
+							if (yytext[0] == '>' && yytext[1] == '=')
+								return GREATER_EQUALS;
+							if (yytext[0] == '<' && yytext[1] == '=')
+								return LESS_EQUALS;
+							if (yytext[0] == '<' && yytext[1] == '>')
+								return NOT_EQUALS;
+							if (yytext[0] == '!' && yytext[1] == '=')
+								return NOT_EQUALS;
+						}
 					}
 
 					/*

src/fe_utils/psqlscan.l

@@ -298,6 +298,15 @@ identifier		{ident_start}{ident_cont}*
 typecast		"::"
 dot_dot			\.\.
 colon_equals	":="
+
+/*
+ * These operator-like tokens (unlike the above ones) also match the {operator}
+ * rule, which means that they might be overridden by a longer match if they
+ * are followed by a comment start or a + or - character. Accordingly, if you
+ * add to this list, you must also add corresponding code to the {operator}
+ * block to return the correct token in such cases. (This is not needed in
+ * psqlscan.l since the token value is ignored there.)
+ */
 equals_greater	"=>"
 less_equals		"<="
 greater_equals	">="

src/interfaces/ecpg/preproc/pgc.l

@@ -245,6 +245,15 @@ array			({ident_cont}|{whitespace}|[\[\]\+\-\*\%\/\(\)\>\.])*
 typecast		"::"
 dot_dot			\.\.
 colon_equals	":="
+
+/*
+ * These operator-like tokens (unlike the above ones) also match the {operator}
+ * rule, which means that they might be overridden by a longer match if they
+ * are followed by a comment start or a + or - character. Accordingly, if you
+ * add to this list, you must also add corresponding code to the {operator}
+ * block to return the correct token in such cases. (This is not needed in
+ * psqlscan.l since the token value is ignored there.)
+ */
 equals_greater	"=>"
 less_equals		"<="
 greater_equals	">="
@@ -732,6 +741,25 @@ cppline			{space}*#([^i][A-Za-z]*|{if}|{ifdef}|{ifndef}|{import})((\/\*[^*/]*\*+
 							if (nchars == 1 &&
 								strchr(",()[].;:+-*/%^<>=", yytext[0]))
 								return yytext[0];
+							/*
+							 * Likewise, if what we have left is two chars, and
+							 * those match the tokens ">=", "<=", "=>", "<>" or
+							 * "!=", then we must return the appropriate token
+							 * rather than the generic Op.
+							 */
+							if (nchars == 2)
+							{
+								if (yytext[0] == '=' && yytext[1] == '>')
+									return EQUALS_GREATER;
+								if (yytext[0] == '>' && yytext[1] == '=')
+									return GREATER_EQUALS;
+								if (yytext[0] == '<' && yytext[1] == '=')
+									return LESS_EQUALS;
+								if (yytext[0] == '<' && yytext[1] == '>')
+									return NOT_EQUALS;
+								if (yytext[0] == '!' && yytext[1] == '=')
+									return NOT_EQUALS;
+							}
 						}
 
 						base_yylval.str = mm_strdup(yytext);

src/test/regress/expected/create_operator.out

@@ -45,6 +45,80 @@ CREATE OPERATOR => (
 ERROR:  syntax error at or near "=>"
 LINE 1: CREATE OPERATOR => (
                         ^
+-- lexing of <=, >=, <>, != has a number of edge cases
+-- (=> is tested elsewhere)
+-- this is legal because ! is not allowed in sql ops
+CREATE OPERATOR !=- (
+   leftarg = int8,		-- right unary
+   procedure = numeric_fac
+);
+SELECT 2 !=-;
+ ?column? 
+----------
+        2
+(1 row)
+
+-- make sure lexer returns != as <> even in edge cases
+SELECT 2 !=/**/ 1, 2 !=/**/ 2;
+ ?column? | ?column? 
+----------+----------
+ t        | f
+(1 row)
+
+SELECT 2 !=-- comment to be removed by psql
+  1;
+ ?column? 
+----------
+ t
+(1 row)
+
+DO $$ -- use DO to protect -- from psql
+  declare r boolean;
+  begin
+    execute $e$ select 2 !=-- comment
+      1 $e$ into r;
+    raise info 'r = %', r;
+  end;
+$$;
+INFO:  r = t
+-- check that <= etc. followed by more operator characters are returned
+-- as the correct token with correct precedence
+SELECT true<>-1 BETWEEN 1 AND 1;  -- BETWEEN has prec. above <> but below Op
+ ?column? 
+----------
+ t
+(1 row)
+
+SELECT false<>/**/1 BETWEEN 1 AND 1;
+ ?column? 
+----------
+ t
+(1 row)
+
+SELECT false<=-1 BETWEEN 1 AND 1;
+ ?column? 
+----------
+ t
+(1 row)
+
+SELECT false>=-1 BETWEEN 1 AND 1;
+ ?column? 
+----------
+ t
+(1 row)
+
+SELECT 2<=/**/3, 3>=/**/2, 2<>/**/3;
+ ?column? | ?column? | ?column? 
+----------+----------+----------
+ t        | t        | t
+(1 row)
+
+SELECT 3<=/**/2, 2>=/**/3, 2<>/**/2;
+ ?column? | ?column? | ?column? 
+----------+----------+----------
+ f        | f        | f
+(1 row)
+
 -- Should fail. CREATE OPERATOR requires USAGE on SCHEMA
 BEGIN TRANSACTION;
 CREATE ROLE regress_rol_op1;

src/test/regress/expected/polymorphism.out

@@ -1478,6 +1478,42 @@ select dfunc('a'::text, 'b', flag => true); -- mixed notation
  a
 (1 row)
 
+-- this tests lexer edge cases around =>
+select dfunc(a =>-1);
+ dfunc 
+-------
+    -1
+(1 row)
+
+select dfunc(a =>+1);
+ dfunc 
+-------
+     1
+(1 row)
+
+select dfunc(a =>/**/1);
+ dfunc 
+-------
+     1
+(1 row)
+
+select dfunc(a =>--comment to be removed by psql
+  1);
+ dfunc 
+-------
+     1
+(1 row)
+
+-- need DO to protect the -- from psql
+do $$
+  declare r integer;
+  begin
+    select dfunc(a=>-- comment
+      1) into r;
+    raise info 'r = %', r;
+  end;
+$$;
+INFO:  r = 1
 -- check reverse-listing of named-arg calls
 CREATE VIEW dfview AS
    SELECT q1, q2,

src/test/regress/sql/create_operator.sql

@@ -45,6 +45,37 @@ CREATE OPERATOR => (
    procedure = numeric_fac
 );
 
+-- lexing of <=, >=, <>, != has a number of edge cases
+-- (=> is tested elsewhere)
+
+-- this is legal because ! is not allowed in sql ops
+CREATE OPERATOR !=- (
+   leftarg = int8,		-- right unary
+   procedure = numeric_fac
+);
+SELECT 2 !=-;
+-- make sure lexer returns != as <> even in edge cases
+SELECT 2 !=/**/ 1, 2 !=/**/ 2;
+SELECT 2 !=-- comment to be removed by psql
+  1;
+DO $$ -- use DO to protect -- from psql
+  declare r boolean;
+  begin
+    execute $e$ select 2 !=-- comment
+      1 $e$ into r;
+    raise info 'r = %', r;
+  end;
+$$;
+
+-- check that <= etc. followed by more operator characters are returned
+-- as the correct token with correct precedence
+SELECT true<>-1 BETWEEN 1 AND 1;  -- BETWEEN has prec. above <> but below Op
+SELECT false<>/**/1 BETWEEN 1 AND 1;
+SELECT false<=-1 BETWEEN 1 AND 1;
+SELECT false>=-1 BETWEEN 1 AND 1;
+SELECT 2<=/**/3, 3>=/**/2, 2<>/**/3;
+SELECT 3<=/**/2, 2>=/**/3, 2<>/**/2;
+
 -- Should fail. CREATE OPERATOR requires USAGE on SCHEMA
 BEGIN TRANSACTION;
 CREATE ROLE regress_rol_op1;

src/test/regress/sql/polymorphism.sql

@@ -785,6 +785,21 @@ select dfunc('a'::text, 'b', flag => false); -- mixed notation
 select dfunc('a'::text, 'b', true); -- full positional notation
 select dfunc('a'::text, 'b', flag => true); -- mixed notation
 
+-- this tests lexer edge cases around =>
+select dfunc(a =>-1);
+select dfunc(a =>+1);
+select dfunc(a =>/**/1);
+select dfunc(a =>--comment to be removed by psql
+  1);
+-- need DO to protect the -- from psql
+do $$
+  declare r integer;
+  begin
+    select dfunc(a=>-- comment
+      1) into r;
+    raise info 'r = %', r;
+  end;
+$$;
 
 -- check reverse-listing of named-arg calls
 CREATE VIEW dfview AS