Papers by Magdy K . Zahran
Polymers and Polymer Composites
Graft copolymerisation of 2,3-epoxypropyl methacrylate (EPMA) on to cotton-cellulose, in the fabr... more Graft copolymerisation of 2,3-epoxypropyl methacrylate (EPMA) on to cotton-cellulose, in the fabric form, was carried out using a cellulose thiocarbonate-KBrO3 redox initiation system. Effects of the concentrations of KBrO3 (initiator) and monomer, the pH of polymerization medium, grafting time and temperature were studied. The results revealed that the graft yield increased with increasing EPMA concentration within the range studied (from 10% to 160%). The optimal grafting conditions for other factors consisted of: [KBrO3], 10 g/1; pH of polymerization medium, 2.5; grafting temperature, 40°C and grafting time, 40 min. with optimum material to liquor ratio 1:30. On the basis of its efficiency as an oil repellent compound 1,1-dihydroperfluoroheptyl methacrylate (PFHMA) was combined with EPMA, in various ratios to promote grafting onto the cotton fabric under the aforementioned optimal conditions. The oil-repellency of the EPMA/PFHMA grafted fabric was then examined. The oil repellenc...
Bookmarks Related papers MentionsView impact
Bioprocess and Biosystems Engineering, Dec 20, 2022
Bookmarks Related papers MentionsView impact
Separation and Purification Technology
Bookmarks Related papers MentionsView impact
Egyptian Journal of Chemistry, 2012
Bookmarks Related papers MentionsView impact
Bookmarks Related papers MentionsView impact
Polymerization of methacrylic acid (MAA) was studied with respect to graft yield, homopolymer for... more Polymerization of methacrylic acid (MAA) was studied with respect to graft yield, homopolymer formation, total conversion and grafting efficiency. These polymerization criteria were found to depend largely on concentrations of KBrO 3 and MAA, pH of the polymerization medium, duration and temperature of polymerization. Applying the optimal conditions to different monomers, the rates of grafting followed the order: methylmethacrylate>methacrylic acid>methylacrylate>acrylonitrile>acrylic acid
Bookmarks Related papers MentionsView impact
Etude de l'influence du type et de la concentration de l'acide, de la concentration de KM... more Etude de l'influence du type et de la concentration de l'acide, de la concentration de KMnO 4 , de la duree et de la temperature de reaction sur le rendement de greffage de l'acide methacrylique. Comparaison du rendement de greffage dans les conditions optimales des acides acrylique et methacrylique, de l'acrylamide, de l'acrylonitrile, de l'acrylate et du methacrylate de methyle. Proposition de mecanisme
Bookmarks Related papers MentionsView impact
Egyptian Journal of Chemistry, 2019
Bookmarks Related papers MentionsView impact
Journal of Bio- and Tribo-Corrosion, 2023
Polyaniline (PANI) nanocomposite with Zn and Ni has been prepared by in situ polymerization of an... more Polyaniline (PANI) nanocomposite with Zn and Ni has been prepared by in situ polymerization of aniline monomer in presence of Ni+2 and Zn+2 ions. The prepared nanocomposite (Ncomp) (PANI/Zn/Ni) has been characterized by spectrophotometric analysis via Fourier-transform infrared spectroscopy (FTIR) and ultraviolet–visible absorption spectra (UV–Vis). Morphological studies via scanning electron microscope SEM, particle size distribution PSD, as well as thermo-gravimetric analysis (TGA), have been investigated. Besides, the prepared (Ncomp) of different weight percentages wt% has been incorporated into water-based paint formulations for carbon steel protection. PSD analysis revealed that the particle size of the formed composite is on the nano-scale ranging between 60 and 160 nm. SEM analysis revealed that the Zn and Ni nanoparticles are quite dispersed into the polymer matrix as they appear in the form of bright spots and have been confirmed by energy dispersive X-ray (EDX) analysis. TGA analysis for the Ncomp showed enhanced thermal stability than that of pure PANI. The corrosion inhibition performance of the painted films has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy as well. The maximum average inhibition efficiency was found to be ranged from 92.8 to 99.4% for the paint of 9% wt% of Ncomp with fair mechanical properties. All measurements have been repeated three times for confirmation.
Bookmarks Related papers MentionsView impact
Digenea simplex (D. simplex), an Egyptian marine red macroalga, contains a diverse group of phyto... more Digenea simplex (D. simplex), an Egyptian marine red macroalga, contains a diverse group of phytochemicals with unique bioactivities. At the same time, the synthesis of nanosuspension (NS) has received increasing interest to optimize the technological aspects of drugs. Thence, the main objective of this work was to use the chloroform extract (ChlE) of D. simplex to prepare its nanosuspension (ChlE-NS) formulation to increase its aqueous solubility, thereby improving its bioactivity. By using FTIR, GC/MS analysis, and phytochemical screening assays, the chemical profiling of ChlE was assessed. NS was prepared by the antisolvent precipitation technique using 1.5% w/v polyvinyl alcohol (PVA). A light microscope, FTIR, particle size distribution, polydispersity index (PDI), and zeta potential (ZP) measurements was used to characterize the prepared NS. Four cancer cell lines were used in the MTT experiment to investigate the anticancer potential of ChlE and ChlE-NS. An apoptotic mechanism was established using acridine orange/ethidium bromide (AO/EB) dual staining, DNA fragmentation, and increased caspase activity. ChlE and ChlE-NS were also evaluated as antioxidants using DPPH and ABTS free radical assays. The results showed that, when compared to ChlE, ChlE-NS had greater cytotoxic activity against the four cancer cell lines. However, results of antioxidant activity showed that ChlE-NS had an IC 50 of 36.86 ± 0.09 and 63.5 ± 0.47%, while ChlE had values of 39.90 ± 0.08 and 86.5 ± 0.8% in DPPH and ABTS assays, respectively. Based on the results of this research, D. simplex ChlE-NS may be an effective strategy for enhancing ChlE's cytotoxic and antioxidant activities.
Bookmarks Related papers MentionsView impact
Bookmarks Related papers MentionsView impact
©2017 National Information and Documentation Center (NIDOC) N this ample field of the 21st centur... more ©2017 National Information and Documentation Center (NIDOC) N this ample field of the 21st century, is having an exceptionally critical effect on the world’s industry and people’s lives. This work aims to synthesis of fast green biogenic silver nanoparticles (AgNPs) using the ethanolic extracts of three Terminalia spices, namely, T. catapa (T.C), T. bellarica (T.B) and T. mellurie (T.M). AgNPs formed was affirmed by using UV–visible spectrophotometer with the characteristic SPR (Surface Plasmon Resonance) band at 424-430nm and by using FT-IR (Fourier transform infrared spectroscopy) and TEM (transmission electron microscopy). Quantification of carbohydrates, total phenolic compounds, flavonoids, and protein contents of these extracts was appraised since these constituents have effective dual roles for AgNPs synthesis. That is, they reduce Ag+ ions to Ag ̊ nanoparticles and thereafter they stabilize these particles. GC/MS analyses of these extracts were also done. The cotton fabrics ...
Bookmarks Related papers MentionsView impact
Asian Journal of Agriculture and Biology, 2018
Rice straw (RS) and rice husk (RH) were selected as a local agricultural residues for biopolymers... more Rice straw (RS) and rice husk (RH) were selected as a local agricultural residues for biopolymers (cellulose, hemicellulose and lignin) extraction using 2% alkaline sodium hydroxide at 90C for almost 3 hours. The extraction process was optimized by Taguchi experimental design method. Results revealed that cellulose was 54.6 % and 52.75 % in case of RS and RH, respectively. Separate hydrolysis and fermentation (SHF) were done using Aspergilus niger crude enzymes and Saccharomyces cerevisiae, which statistically optimized with two experimental design models (Taguchi and PlacketBurman design). Maximum glucose yield from hydrolysis of the extracted cellulose RS (CRS) and cellulose RH (CRH) was 255 mg/g and 120 mg/g, respectively. Bioethanol yield from the obtained fermentable glucose of CRS and CRH were 231.8 mg/g and 269.4 mg/g, respectively. Extraction, hydrolysis and fermentation processes optimization can be an alternative sustainable development approach to utilize this abundant ag...
Bookmarks Related papers MentionsView impact
Pigment & Resin Technology, 2018
Purpose The purpose of this paper is to prepare ultra-violet (UV)-curable inkjet inks for textile... more Purpose The purpose of this paper is to prepare ultra-violet (UV)-curable inkjet inks for textile printing application. The influence of both type and component ratio of monomer/oligomer on the quality of the desired viscosity range is studied. Moreover, the effect of pigment/resin ratio on the rheological behaviour of the ink has been studied. Design/methodology/approach Aqueous dispersions of nanoscale organic pigments were prepared through ball milling and ultrasonication. The dispersed pigments were encapsulated into UV-curable resin via miniemulsion technique, using different types and component ratios of monomers and oligomers. Findings It was found that the monomer/oligomer ratio of 2:3 and the pigment/resin ratio of 2:1 gave the most stable miniemulsion dispersions and provided the most suitable rheological range for inkjet printing inks. Research limitations/implications As the rheology of the ink is optimised, most of the problems associated with the jetting process could ...
Bookmarks Related papers MentionsView impact
Planta Medica, 2012
Bookmarks Related papers MentionsView impact
Journal of Applied Polymer Science, 1996
The cellulose thiocarbonate, in the fabric form, was treated first with a freshly prepared ferrou... more The cellulose thiocarbonate, in the fabric form, was treated first with a freshly prepared ferrous ammonium sulphate (FAS) solution. The so-treated fabric formed, with N-bromosuccinimide (NBS), an effective redox system capable of initiating grafting of methyl methacrylate (MMA) and other vinyl monomers onto the cotton fabric. The effect of the polymerization conditions on the polymer criteria, namely, graft yield, homopolymer, total conversion, and grafting efficiency, was studied. These polymer criteria were found to depend extensively upon concentrations of the Fe 2+ ion (activator), NBS (initiator), and MMA ; pH of the polymerization medium, and duration and temperature of polymerization. Based on detailed investigation of these factors, the optimal conditions for grafting were as follows : Fe 2+ , 1 X 10 -3 mol/L ; NBS, 1 X 10 -2 mol/L ; MMA, 4% ; pH, 2 ; polymerization time, 150 min ; polymerization temperature, 60°C ; material/liquor ratio, 1 : 100. Under these optimal conditions, the rates of grafting of different vinyl monomers were in the following sequence : methyl methacrylate >> methyl acrylate > acrylonitrile. Other vinyl monomers, namely, acrylic acid, and methacrylic acid have no ability to he grafted to the cellulosic fabric using the said redox system. A tentative mechanism for the polymerization reaction is suggested.
Bookmarks Related papers MentionsView impact
Chemical Papers
Nanotechnology has a real-world impact on every aspect of life. Many researchers have been drawn ... more Nanotechnology has a real-world impact on every aspect of life. Many researchers have been drawn to the biosynthesis of gold and iron oxide nanoparticles (Au-NPs and SPIONS) because they have a wide range of life applications. In this work, a single-step environmentally friendly biosynthesis of Au-NPs and SPIONS is reported by reducing solutions of gold aureate and ferric chloride is reported for the first time using the hydroethanolic extract (HEE) of Salvia officinalis (S. officinalis), an edible plant found in Egypt. The phytochemicals present in HEE were responsible for the reduction as well as stabilization of these nanoparticles. Before using the HEE, it was phytochemically screened for its constituents. Qualitatively, the HEE was found to have comparable levels of phenolics, flavonoids, tannins, proteins, carbohydrates, terpenoids, steroids, and polysaccharides. Quantitatively, total phenolics (236.91 ± 2.15 mg GAE/g extract), flavonoids (91.38 ± 0.97 mg QE/g extract), tannin...
Bookmarks Related papers MentionsView impact
Journal of Drug Delivery Science and Technology, 2022
Bookmarks Related papers MentionsView impact
Bookmarks Related papers MentionsView impact
Polymer Bulletin, 2017
Bookmarks Related papers MentionsView impact
Uploads
Papers by Magdy K . Zahran