Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2009
Formability of sheet metals is often assessed by means of forming limit diagrams (FLD). In this p... more Formability of sheet metals is often assessed by means of forming limit diagrams (FLD). In this paper, performing three different series of experiments, the effect of forming velocity on FLDs is investigated experimentally for Al 6061-T6 and AISI 1045 sheets. In addition to determining the conventional FLDs at quasi-static condition ( The results show that while a substantial improvement in high strain rate formability of the aluminium sheet can be obtained, this improvement is not considerable for the steel sheets. Also, under the effect of contact pressure between tool and sheet, the formability increases for both steel and aluminium sheets on impact.
... Schools: School of Art, Design and Architecture. Related URLs: Author. Depositing User: ErtuU... more ... Schools: School of Art, Design and Architecture. Related URLs: Author. Depositing User: ErtuUnver. Date Deposited: 26 Oct 2010 13:52. Last Modified: 26 Oct 2010 13:52. URI: http://eprints.hud.ac.uk/id/eprint/8866. Item control for Repository Staff only: View Item. ...
The focus of the research poster is to present the first phase development of an online 3D virtua... more The focus of the research poster is to present the first phase development of an online 3D virtual interactive workshop for use as a learning support environment for enhanced health and safety learning through gaming for product, transport, interior design courses and wider ADA students using industrial machinery in the School of Art, Design & Architecture. The objective is to create a 3D interactive learning game that on campus and off campus students can use to familiarise themselves with the workshops and take a H&S pre-test within the virtual environment before using an actual industrial machine in the live busy workshop. The learner can see where important areas are located and how machinery operates. The Virtual art and design workshop has been developed by 3D Digital design research group through University research funding. The research group comprises of two academics, two undergraduate 3D product and one transport design student, a post graduate MA 3D Design student. This is the first phase of the project which focuses on modelling and also includes game engine testing and adding physics interactivity. The virtual workshop is accurately modelled to scale and is fully interactive and fitted with virtual models of industrial design and engineering machinery, laser cutters, computer suite and all studio furniture and equipment. The buildings, interior details and all machines in the physical workshops were photographed as used as templates for creating accurate 3D models. The researchers used Solidworks to model all machines and the interior building structures, exterior fittings, furniture, lighting and textures were modelled and added in Alias Design Studio. The 3D models were transferred into online game engine Virtools, adding coding for single user interaction on a keyboard or joystick. In the first phase a single user controlled avatar is active in the environment and extra avatars were programmed to stand or move around to populate the workshop.
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2009
Formability of sheet metals is often assessed by means of forming limit diagrams (FLD). In this p... more Formability of sheet metals is often assessed by means of forming limit diagrams (FLD). In this paper, performing three different series of experiments, the effect of forming velocity on FLDs is investigated experimentally for Al 6061-T6 and AISI 1045 sheets. In addition to determining the conventional FLDs at quasi-static condition ( The results show that while a substantial improvement in high strain rate formability of the aluminium sheet can be obtained, this improvement is not considerable for the steel sheets. Also, under the effect of contact pressure between tool and sheet, the formability increases for both steel and aluminium sheets on impact.
... Schools: School of Art, Design and Architecture. Related URLs: Author. Depositing User: ErtuU... more ... Schools: School of Art, Design and Architecture. Related URLs: Author. Depositing User: ErtuUnver. Date Deposited: 26 Oct 2010 13:52. Last Modified: 26 Oct 2010 13:52. URI: http://eprints.hud.ac.uk/id/eprint/8866. Item control for Repository Staff only: View Item. ...
The focus of the research poster is to present the first phase development of an online 3D virtua... more The focus of the research poster is to present the first phase development of an online 3D virtual interactive workshop for use as a learning support environment for enhanced health and safety learning through gaming for product, transport, interior design courses and wider ADA students using industrial machinery in the School of Art, Design & Architecture. The objective is to create a 3D interactive learning game that on campus and off campus students can use to familiarise themselves with the workshops and take a H&S pre-test within the virtual environment before using an actual industrial machine in the live busy workshop. The learner can see where important areas are located and how machinery operates. The Virtual art and design workshop has been developed by 3D Digital design research group through University research funding. The research group comprises of two academics, two undergraduate 3D product and one transport design student, a post graduate MA 3D Design student. This is the first phase of the project which focuses on modelling and also includes game engine testing and adding physics interactivity. The virtual workshop is accurately modelled to scale and is fully interactive and fitted with virtual models of industrial design and engineering machinery, laser cutters, computer suite and all studio furniture and equipment. The buildings, interior details and all machines in the physical workshops were photographed as used as templates for creating accurate 3D models. The researchers used Solidworks to model all machines and the interior building structures, exterior fittings, furniture, lighting and textures were modelled and added in Alias Design Studio. The 3D models were transferred into online game engine Virtools, adding coding for single user interaction on a keyboard or joystick. In the first phase a single user controlled avatar is active in the environment and extra avatars were programmed to stand or move around to populate the workshop.
Uploads
Papers by ertu unver