Journal of Micromechanics and Microengineering, 2010
A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid ... more A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid streams is designed and fabricated. Experimental and numerical studies have been carried out on the micromixer at Reynolds numbers ranging from 10 to 80. The three-dimensional Navier-Stokes equations have been used to analyze the mixing and flow behavior of the micromixer, which is composed of two sub-channels of unequal widths which repeatedly undergo splitting and recombination. The difference between the mass flow rates in the two sub-channels creates an unbalanced collision of the two fluid streams. Mixing is mainly due to the combined effect of unbalanced collisions of the fluid streams and Dean vortices. The micromixer shows interesting mixing behavior for different ratios of the widths of the two split sub-channels. The sub-channels wherein the major sub-channel is twice as wide as the minor sub-channel exhibit the highest mixing performance at Reynolds numbers larger than 40. The results show the lowest mixing performance for the case of uniform width, where balanced collisions occur.
An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an ... more An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an integrated micromixer (IMM) and a preconcentrator with a separation column. The passive and planar type of IMM is based on an unbalanced split and the cross collision of the fluidic streams. The IMM can be easily fabricated and integrated to the microfluidic system. The preconcentrator has nanochannels formed by the electrical breakdown of polydimethylsiloxane (PDMS) membrane by applying a high electrical shock, but without any nano-lithography. The integrated microdevice was used for sample preparation (mixing with tagging molecules) and subsequent concentration of proteins. Proteins were electrokinetically trapped near the junction of the micro/nanochannels. We show a conceptual design and a simple microfluidic system for purposes of mixing and preconcentration. Figure Mixing and preconcentration of dissolved proteins using an integrated micro/nano-fluidic system
Journal of Micromechanics and Microengineering, 2010
A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid ... more A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid streams is designed and fabricated. Experimental and numerical studies have been carried out on the micromixer at Reynolds numbers ranging from 10 to 80. The three-dimensional Navier-Stokes equations have been used to analyze the mixing and flow behavior of the micromixer, which is composed of two sub-channels of unequal widths which repeatedly undergo splitting and recombination. The difference between the mass flow rates in the two sub-channels creates an unbalanced collision of the two fluid streams. Mixing is mainly due to the combined effect of unbalanced collisions of the fluid streams and Dean vortices. The micromixer shows interesting mixing behavior for different ratios of the widths of the two split sub-channels. The sub-channels wherein the major sub-channel is twice as wide as the minor sub-channel exhibit the highest mixing performance at Reynolds numbers larger than 40. The results show the lowest mixing performance for the case of uniform width, where balanced collisions occur.
An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an ... more An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an integrated micromixer (IMM) and a preconcentrator with a separation column. The passive and planar type of IMM is based on an unbalanced split and the cross collision of the fluidic streams. The IMM can be easily fabricated and integrated to the microfluidic system. The preconcentrator has nanochannels formed by the electrical breakdown of polydimethylsiloxane (PDMS) membrane by applying a high electrical shock, but without any nano-lithography. The integrated microdevice was used for sample preparation (mixing with tagging molecules) and subsequent concentration of proteins. Proteins were electrokinetically trapped near the junction of the micro/nanochannels. We show a conceptual design and a simple microfluidic system for purposes of mixing and preconcentration. Figure Mixing and preconcentration of dissolved proteins using an integrated micro/nano-fluidic system
Journal of Micromechanics and Microengineering, 2010
A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid ... more A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid streams is designed and fabricated. Experimental and numerical studies have been carried out on the micromixer at Reynolds numbers ranging from 10 to 80. The three-dimensional Navier-Stokes equations have been used to analyze the mixing and flow behavior of the micromixer, which is composed of two sub-channels of unequal widths which repeatedly undergo splitting and recombination. The difference between the mass flow rates in the two sub-channels creates an unbalanced collision of the two fluid streams. Mixing is mainly due to the combined effect of unbalanced collisions of the fluid streams and Dean vortices. The micromixer shows interesting mixing behavior for different ratios of the widths of the two split sub-channels. The sub-channels wherein the major sub-channel is twice as wide as the minor sub-channel exhibit the highest mixing performance at Reynolds numbers larger than 40. The results show the lowest mixing performance for the case of uniform width, where balanced collisions occur.
An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an ... more An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an integrated micromixer (IMM) and a preconcentrator with a separation column. The passive and planar type of IMM is based on an unbalanced split and the cross collision of the fluidic streams. The IMM can be easily fabricated and integrated to the microfluidic system. The preconcentrator has nanochannels formed by the electrical breakdown of polydimethylsiloxane (PDMS) membrane by applying a high electrical shock, but without any nano-lithography. The integrated microdevice was used for sample preparation (mixing with tagging molecules) and subsequent concentration of proteins. Proteins were electrokinetically trapped near the junction of the micro/nanochannels. We show a conceptual design and a simple microfluidic system for purposes of mixing and preconcentration. Figure Mixing and preconcentration of dissolved proteins using an integrated micro/nano-fluidic system
Journal of Micromechanics and Microengineering, 2010
A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid ... more A new passive micromixer based on the concept of unbalanced splits and cross-collisions of fluid streams is designed and fabricated. Experimental and numerical studies have been carried out on the micromixer at Reynolds numbers ranging from 10 to 80. The three-dimensional Navier-Stokes equations have been used to analyze the mixing and flow behavior of the micromixer, which is composed of two sub-channels of unequal widths which repeatedly undergo splitting and recombination. The difference between the mass flow rates in the two sub-channels creates an unbalanced collision of the two fluid streams. Mixing is mainly due to the combined effect of unbalanced collisions of the fluid streams and Dean vortices. The micromixer shows interesting mixing behavior for different ratios of the widths of the two split sub-channels. The sub-channels wherein the major sub-channel is twice as wide as the minor sub-channel exhibit the highest mixing performance at Reynolds numbers larger than 40. The results show the lowest mixing performance for the case of uniform width, where balanced collisions occur.
An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an ... more An integrated micro/nano-fluidic system is presented for protein analysis. It is comprised of an integrated micromixer (IMM) and a preconcentrator with a separation column. The passive and planar type of IMM is based on an unbalanced split and the cross collision of the fluidic streams. The IMM can be easily fabricated and integrated to the microfluidic system. The preconcentrator has nanochannels formed by the electrical breakdown of polydimethylsiloxane (PDMS) membrane by applying a high electrical shock, but without any nano-lithography. The integrated microdevice was used for sample preparation (mixing with tagging molecules) and subsequent concentration of proteins. Proteins were electrokinetically trapped near the junction of the micro/nanochannels. We show a conceptual design and a simple microfluidic system for purposes of mixing and preconcentration. Figure Mixing and preconcentration of dissolved proteins using an integrated micro/nano-fluidic system
Uploads
Papers by Khalid Anwar