Periodontal-endodontic lesions are the combination of pulp involvement and periodontal disease in... more Periodontal-endodontic lesions are the combination of pulp involvement and periodontal disease in the same tooth. Diagnosis may become difficult; however, a differential etiological consideration is indispensable for appropriate treatment.
Background: Stress concentrated at an implant’s neck may affect bone-to-implant contact (BIC). Th... more Background: Stress concentrated at an implant’s neck may affect bone-to-implant contact (BIC). The objective of this study was to evaluate four different implant neck designs using two different drilling protocols on the BIC. Methods: Ninety-six implants were inserted in 12 minipigs calvarium. Implants neck designs evaluated were: type 1–6 coronal flutes (CFs), 8 shallow microthreads (SMs); type 2–6 CFs,4 deep microthreads (DMs); type 3–4 DMs; type 4–2 CFs, 8 SMs. Two groups of forty-eight implants were inserted with a final drill diameter of 2.8 mm (DP1) or 3.2 mm (DP2). Animals were sacrificed after 1 and 3 months, total-BIC (t-BIC) and coronal-BIC (c-BIC) were evaluated by nondecalcified histomorphometry analysis. Results: At 1 month, t-BIC ranged from 85–91% without significant differences between implant types or drilling protocol. Flutes on the coronal aspect impaired the BIC at 3 m. c-BIC of implant types with 6 CFs was similar and significantly lower than that of implant typ...
This in-vitro study assessed the effect of an underdrilling implant placement protocol on the ins... more This in-vitro study assessed the effect of an underdrilling implant placement protocol on the insertion torque, implant surface temperature and surface roughness (Sa) topography of the cervical microthreads of implants. Three groups of 25 implants (3.75 mm × 10 mm) were placed in osteotomies prepared in an artificial bone disc with final diameters of 3.65 mm according to the manufacturer’s instructions and in osteotomies prepared in accordance with an underdrilling protocol with final drill diameters of 3.2 and 2.8 mm (groups D3.65, D3.2, D2.8, respectively). Implants were inserted at a constant rate of 30 rpm. The surface temperature of the implants was measured with a thermal camera and temperature amplitude (Temp-Amp) was calculated by subtracting the room temperature from the measured implant surface temperature. Upon implant retrieval, coronal surface topography was assessed using a Nanofocus µsurf explorer and compared to a set of 25 new implants (control group). The differenc...
The accuracy of panoramic radiography and computed tomography (CT) in the evaluation of depth of ... more The accuracy of panoramic radiography and computed tomography (CT) in the evaluation of depth of the mandible at recipient implant sites was compared by measuring the distance between the edentulous bony crest and the superior border of the inferior alveolar canal in a group of ten patients. Distortion was calculated using the metal ball technique for the panoramic radiographs and the computer scale for the CT scans. The precise distance between the bony crest and inferior alveolar canal was determined from postoperative radiographs from the known length of the implants. It was found that although CT scans are more precise, panoramic radiography is sufficiently accurate for routine clinical purposes. CT scans have, however, an additional advantage in presurgical planning, since they reveal the horizontal dimension and shape of the mandible, and the topography and buccolingual location of the inferior alveolar canal.
The objective of this study is to compare bone-to-implant contact (BIC) between implants inserted... more The objective of this study is to compare bone-to-implant contact (BIC) between implants inserted at high torque due to under-drilling of the crestal bone to those inserted at low torque due to over-drilling of the crestal bone. Forty implants with diameters of 3.75 mm (group A) or 3.55 mm (group B) were inserted in the proximal tibiae of NZW rabbits in two separate surgeries on day 0 or 21. Osteotomy of the crestal bone was finalized with a 3.65-mm drill. In group A, implants were inserted at torque ≥35 Ncm (under-drilling) and in group B with torque <10 Ncm (over-drilling). Implants and their surrounding bone were retrieved on day 42, thus creating 3- and 6-week observation periods, processed for non-decalcified histology and stained with toluidine blue. Crestal BIC (c-BIC) and total BIC (t-BIC) were measured. Wilcoxon test was used to evaluate differences between groups. Three weeks post-surgery, the mean c-BIC in group A was 16.3 ± 3.3 vs 31.5 ± 3.4 % in group B (P < 0.05). At 6 weeks, a similar trend was observed (group A: 28.7 ± 3.6 %; group B: 38.4 ± 4.9 %) (P > 0.05). No differences in t-BIC were noted at 3 weeks and at 6 weeks between the groups. Insertion of implants with an over-drilling protocol of the crestal aspect of the osteotomy resulted in increased short-term crestal bone-to-implant contact. Insertion of implants with a high torque following an under-drilling protocol, commonly used for immediate loading, may reduce crestal bone-to-implant contact at early healing stages.
A case report of oral and periodontal manifestation of agranulocytosis in a 12-year-old girl is p... more A case report of oral and periodontal manifestation of agranulocytosis in a 12-year-old girl is presented. The agranulocytic state may have been caused by chronic brucellosis since childhood. On admission to the hospital, the acute oral symptoms were treated in order to enable the child to eat and perform standard oral hygiene measures. Chlorhexidine gluconate 0.2% was irrigated daily under pressure for supra- and subgingival plaque control. Resolution of inflammation was achieved without increase in white blood count and thus can be attributed to the control of the local etiologic factor, i.e., plaque.
The International journal of periodontics & restorative dentistry, 2005
This study was performed to evaluate the effect of deproteinized bovine porous bone mineral (BBM)... more This study was performed to evaluate the effect of deproteinized bovine porous bone mineral (BBM) and BBM-collagen (BBMC) used alone or in combination with a bilayer collagen membrane in guided periodontal regeneration. In 12 dogs, contralateral surgical circular fenestration defects 5 mm in diameter were produced at the midbuccal aspect of the alveolar bone in 24 maxillary canines. Bone, periodontal ligament, and cementum were completely removed. Experimental sites were filled with BBM or BBMC. Bilayered collagen membranes covered half the experimental sites (BBM+M and BBMC+M), and the other half were left uncovered. Control sites remained empty; half were covered with collagen membranes (cont+M) and the underlying space spontaneously filled with blood, and half were left uncovered (cont). Three months postsurgery, undecalcified sections were prepared. Measurements were made using a caliper on a projection microscope, and the surface area of new bone and BBM particles within the he...
The objective of the present study was to assess the effect of bilayered/collagen barriers enrich... more The objective of the present study was to assess the effect of bilayered/collagen barriers enriched with fibronectin and heparan sulfate on the prevention of apical migration of the epithelium during the initial stage of periodontal wound healing. Experimental osseous defects were produced on the labial aspect of maxillary canines in dogs. Experimental sites were treated with either bilayered enriched collagen barriers or with nonenriched bilayered collagen barriers, using the guided tissue regeneration technique. Control sites were treated with monolayered collagen barriers that were not enriched with fibronectin and heparan sulfate. Histologic and histomorphometric examinations performed on specimens obtained 20 days post‐operative indicate the formation of a short junctional epithelium in the experimental sites treated with enriched collagen barriers. In this group, 95% of the occlusal‐apical length of the defects was repopulated by connective tissue cells. In the other 2 groups,...
Background: Enamel matrix protein derivative (EMD) has proven to enhance periodontal regeneration... more Background: Enamel matrix protein derivative (EMD) has proven to enhance periodontal regeneration in human and animal studies. The present histomorphometric study evaluated healing of combined supra‐infrabony periodontal defects with EMD.Methods: The study comprised two groups of 10 Wistar rats each, 7 to 8 months old. Bony defects were created on the mesial aspect of the mesial root of the first maxillary molar. The root surface was planed and 24% EDTA gel applied for 2 minutes and then rinsed with water. In the study group, EMD was applied, and in the control group, only propylene glycol alginate was applied. Animals were sacrificed 12 weeks after surgery, and block sections were removed, demineralized, and embedded in paraffin. For histomorphometric analysis, three sections from the central area of the defect were selected. Root, surgical defect, epithelial attachment, sulcus, supracrestal connective tissue, ankylosis, and the length and area of new cementum and new bone were mea...
Background: Due to the lack of data comparing the biological behavior of two formulations, granul... more Background: Due to the lack of data comparing the biological behavior of two formulations, granules and paste, of alloplastic graft from microtomographic and histomorphometric points of view, the aim of the present experiment was to compare the histomorphometric and microtomographic healing of two formulations, i.e., granules (MR sites) or paste (MR-inject sites) of an alloplastic graft composed of a combination of beta-tricalcium phosphate and hydroxyapatite used for maxillary sinus lifting. Methods: A sinus lifting procedure was carried out bilaterally in 20 rabbits, and the elevated space was filled with either paste or granules of an alloplastic material. A collagen membrane was placed on the antrostomy and the animals were euthanized after 2 or 10 weeks, 10 animals each group. Microtomographic and histological analyses were performed. Results: Higher proportions of new bone formation were found at the MR, compared to the MR-inject sites both after 2 weeks (2.65 ± 2.89% vs. 0.08...
Periodontal-endodontic lesions are the combination of pulp involvement and periodontal disease in... more Periodontal-endodontic lesions are the combination of pulp involvement and periodontal disease in the same tooth. Diagnosis may become difficult; however, a differential etiological consideration is indispensable for appropriate treatment.
Background: Stress concentrated at an implant’s neck may affect bone-to-implant contact (BIC). Th... more Background: Stress concentrated at an implant’s neck may affect bone-to-implant contact (BIC). The objective of this study was to evaluate four different implant neck designs using two different drilling protocols on the BIC. Methods: Ninety-six implants were inserted in 12 minipigs calvarium. Implants neck designs evaluated were: type 1–6 coronal flutes (CFs), 8 shallow microthreads (SMs); type 2–6 CFs,4 deep microthreads (DMs); type 3–4 DMs; type 4–2 CFs, 8 SMs. Two groups of forty-eight implants were inserted with a final drill diameter of 2.8 mm (DP1) or 3.2 mm (DP2). Animals were sacrificed after 1 and 3 months, total-BIC (t-BIC) and coronal-BIC (c-BIC) were evaluated by nondecalcified histomorphometry analysis. Results: At 1 month, t-BIC ranged from 85–91% without significant differences between implant types or drilling protocol. Flutes on the coronal aspect impaired the BIC at 3 m. c-BIC of implant types with 6 CFs was similar and significantly lower than that of implant typ...
This in-vitro study assessed the effect of an underdrilling implant placement protocol on the ins... more This in-vitro study assessed the effect of an underdrilling implant placement protocol on the insertion torque, implant surface temperature and surface roughness (Sa) topography of the cervical microthreads of implants. Three groups of 25 implants (3.75 mm × 10 mm) were placed in osteotomies prepared in an artificial bone disc with final diameters of 3.65 mm according to the manufacturer’s instructions and in osteotomies prepared in accordance with an underdrilling protocol with final drill diameters of 3.2 and 2.8 mm (groups D3.65, D3.2, D2.8, respectively). Implants were inserted at a constant rate of 30 rpm. The surface temperature of the implants was measured with a thermal camera and temperature amplitude (Temp-Amp) was calculated by subtracting the room temperature from the measured implant surface temperature. Upon implant retrieval, coronal surface topography was assessed using a Nanofocus µsurf explorer and compared to a set of 25 new implants (control group). The differenc...
The accuracy of panoramic radiography and computed tomography (CT) in the evaluation of depth of ... more The accuracy of panoramic radiography and computed tomography (CT) in the evaluation of depth of the mandible at recipient implant sites was compared by measuring the distance between the edentulous bony crest and the superior border of the inferior alveolar canal in a group of ten patients. Distortion was calculated using the metal ball technique for the panoramic radiographs and the computer scale for the CT scans. The precise distance between the bony crest and inferior alveolar canal was determined from postoperative radiographs from the known length of the implants. It was found that although CT scans are more precise, panoramic radiography is sufficiently accurate for routine clinical purposes. CT scans have, however, an additional advantage in presurgical planning, since they reveal the horizontal dimension and shape of the mandible, and the topography and buccolingual location of the inferior alveolar canal.
The objective of this study is to compare bone-to-implant contact (BIC) between implants inserted... more The objective of this study is to compare bone-to-implant contact (BIC) between implants inserted at high torque due to under-drilling of the crestal bone to those inserted at low torque due to over-drilling of the crestal bone. Forty implants with diameters of 3.75 mm (group A) or 3.55 mm (group B) were inserted in the proximal tibiae of NZW rabbits in two separate surgeries on day 0 or 21. Osteotomy of the crestal bone was finalized with a 3.65-mm drill. In group A, implants were inserted at torque ≥35 Ncm (under-drilling) and in group B with torque <10 Ncm (over-drilling). Implants and their surrounding bone were retrieved on day 42, thus creating 3- and 6-week observation periods, processed for non-decalcified histology and stained with toluidine blue. Crestal BIC (c-BIC) and total BIC (t-BIC) were measured. Wilcoxon test was used to evaluate differences between groups. Three weeks post-surgery, the mean c-BIC in group A was 16.3 ± 3.3 vs 31.5 ± 3.4 % in group B (P < 0.05). At 6 weeks, a similar trend was observed (group A: 28.7 ± 3.6 %; group B: 38.4 ± 4.9 %) (P > 0.05). No differences in t-BIC were noted at 3 weeks and at 6 weeks between the groups. Insertion of implants with an over-drilling protocol of the crestal aspect of the osteotomy resulted in increased short-term crestal bone-to-implant contact. Insertion of implants with a high torque following an under-drilling protocol, commonly used for immediate loading, may reduce crestal bone-to-implant contact at early healing stages.
A case report of oral and periodontal manifestation of agranulocytosis in a 12-year-old girl is p... more A case report of oral and periodontal manifestation of agranulocytosis in a 12-year-old girl is presented. The agranulocytic state may have been caused by chronic brucellosis since childhood. On admission to the hospital, the acute oral symptoms were treated in order to enable the child to eat and perform standard oral hygiene measures. Chlorhexidine gluconate 0.2% was irrigated daily under pressure for supra- and subgingival plaque control. Resolution of inflammation was achieved without increase in white blood count and thus can be attributed to the control of the local etiologic factor, i.e., plaque.
The International journal of periodontics & restorative dentistry, 2005
This study was performed to evaluate the effect of deproteinized bovine porous bone mineral (BBM)... more This study was performed to evaluate the effect of deproteinized bovine porous bone mineral (BBM) and BBM-collagen (BBMC) used alone or in combination with a bilayer collagen membrane in guided periodontal regeneration. In 12 dogs, contralateral surgical circular fenestration defects 5 mm in diameter were produced at the midbuccal aspect of the alveolar bone in 24 maxillary canines. Bone, periodontal ligament, and cementum were completely removed. Experimental sites were filled with BBM or BBMC. Bilayered collagen membranes covered half the experimental sites (BBM+M and BBMC+M), and the other half were left uncovered. Control sites remained empty; half were covered with collagen membranes (cont+M) and the underlying space spontaneously filled with blood, and half were left uncovered (cont). Three months postsurgery, undecalcified sections were prepared. Measurements were made using a caliper on a projection microscope, and the surface area of new bone and BBM particles within the he...
The objective of the present study was to assess the effect of bilayered/collagen barriers enrich... more The objective of the present study was to assess the effect of bilayered/collagen barriers enriched with fibronectin and heparan sulfate on the prevention of apical migration of the epithelium during the initial stage of periodontal wound healing. Experimental osseous defects were produced on the labial aspect of maxillary canines in dogs. Experimental sites were treated with either bilayered enriched collagen barriers or with nonenriched bilayered collagen barriers, using the guided tissue regeneration technique. Control sites were treated with monolayered collagen barriers that were not enriched with fibronectin and heparan sulfate. Histologic and histomorphometric examinations performed on specimens obtained 20 days post‐operative indicate the formation of a short junctional epithelium in the experimental sites treated with enriched collagen barriers. In this group, 95% of the occlusal‐apical length of the defects was repopulated by connective tissue cells. In the other 2 groups,...
Background: Enamel matrix protein derivative (EMD) has proven to enhance periodontal regeneration... more Background: Enamel matrix protein derivative (EMD) has proven to enhance periodontal regeneration in human and animal studies. The present histomorphometric study evaluated healing of combined supra‐infrabony periodontal defects with EMD.Methods: The study comprised two groups of 10 Wistar rats each, 7 to 8 months old. Bony defects were created on the mesial aspect of the mesial root of the first maxillary molar. The root surface was planed and 24% EDTA gel applied for 2 minutes and then rinsed with water. In the study group, EMD was applied, and in the control group, only propylene glycol alginate was applied. Animals were sacrificed 12 weeks after surgery, and block sections were removed, demineralized, and embedded in paraffin. For histomorphometric analysis, three sections from the central area of the defect were selected. Root, surgical defect, epithelial attachment, sulcus, supracrestal connective tissue, ankylosis, and the length and area of new cementum and new bone were mea...
Background: Due to the lack of data comparing the biological behavior of two formulations, granul... more Background: Due to the lack of data comparing the biological behavior of two formulations, granules and paste, of alloplastic graft from microtomographic and histomorphometric points of view, the aim of the present experiment was to compare the histomorphometric and microtomographic healing of two formulations, i.e., granules (MR sites) or paste (MR-inject sites) of an alloplastic graft composed of a combination of beta-tricalcium phosphate and hydroxyapatite used for maxillary sinus lifting. Methods: A sinus lifting procedure was carried out bilaterally in 20 rabbits, and the elevated space was filled with either paste or granules of an alloplastic material. A collagen membrane was placed on the antrostomy and the animals were euthanized after 2 or 10 weeks, 10 animals each group. Microtomographic and histological analyses were performed. Results: Higher proportions of new bone formation were found at the MR, compared to the MR-inject sites both after 2 weeks (2.65 ± 2.89% vs. 0.08...
Uploads
Papers by Ofer Moses