V INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES, 2010
Linear hyperbranched block copolymers based on PBA polyesters (HPBA) has been synthesized by a on... more Linear hyperbranched block copolymers based on PBA polyesters (HPBA) has been synthesized by a one-pot synthesis procedure and well characterized by MALDI-TOF mass spectrometry, H-NMR and SEC tools, to obtain reliable information on its chemical composition and molar mass distribution.
Abstract The presence of pharmaceuticals, such as non-steroidal anti-inflammatory drugs (NSAIDs) ... more Abstract The presence of pharmaceuticals, such as non-steroidal anti-inflammatory drugs (NSAIDs) in the aquatic environment represents a worldwide threat. NSAIDs are considered “emerging contaminants” of water since the traditional methods are not designed to efficiently remove them. Aiming to overcome the limits of the conventional wastewater treatment plants, we propose molecularly imprinted polymers (MIPs) as valid tools for selective adsorption and removal of these drugs from water. In particular, in this work, we have prepared diclofenac-selective MIP by a simple bulk polymerization process. After the characterization of the synthetized polymers, the binding abilities were evaluated in detail through the adsorption of diclofenac in aqueous solution and compared with the abilities of a corresponding non-imprinted polymer used as a reference. Thanks to the imprinting effect, the prepared MIP adsorbs with extreme selectivity its template molecule, i.e. the diclofenac. This effect was evaluated by testing the adsorption abilities towards different drugs, such as acetylsalicylic acid and trimethoprim. In addition, MIP reusability was demonstrated after a simple regeneration step. The strength of this work is due to the low cost synthesis of MIP and to its optimal performance of molecular recognition in water, differentially from many of the traditional MIPs, usually used with organic solvent. Such peculiarities make the material potentially applicable for water treatment on a large scale.
Rapid Communications in Mass Spectrometry, Nov 30, 1999
The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fra... more The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fractionation of samples through analytical size exclusion chromatography (SEC). Selected SEC fractions are then analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and the mass spectra of these nearly monodisperse samples allow the determination of the average molar masses. The SEC/MALDI procedure has now been applied to two polycarbonate samples, PC1 and PC2. The results show that the MALDI spectra of the SEC fractions allow not only the detection of linear and cyclic oligomers contained in these samples, but also the simultaneous determination of their average molar masses. Two slightly differing SEC calibration plots were obtained, due to the smaller hydrodynamic volume of the polycarbonate cyclic chains with respect to the linear ones. In agreement with theory, the ratio (M(cycle)/M(linear))(Ve) at a fixed elution volume was found to be 1.22, independent of the molar mass values. Copyright 1999 John Wiley & Sons, Ltd.
Rapid Communications in Mass Spectrometry, Nov 30, 1999
The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fra... more The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fractionation of samples through analytical size exclusion chromatography (SEC). Selected SEC fractions are then analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and the mass spectra of these nearly monodisperse samples allow the determination of the average molar masses. The SEC/MALDI procedure has now been applied to two polycarbonate samples, PC1 and PC2. The results show that the MALDI spectra of the SEC fractions allow not only the detection of linear and cyclic oligomers contained in these samples, but also the simultaneous determination of their average molar masses. Two slightly differing SEC calibration plots were obtained, due to the smaller hydrodynamic volume of the polycarbonate cyclic chains with respect to the linear ones. In agreement with theory, the ratio (M(cycle)/M(linear))(Ve) at a fixed elution volume was found to be 1.22, independent of the molar mass values. Copyright 1999 John Wiley & Sons, Ltd.
Ecotoxicology and Environmental Safety, Jul 1, 2016
The Ionian beaches of Sicily are of particular ecological interest because they include the basin... more The Ionian beaches of Sicily are of particular ecological interest because they include the basin of the largest active volcano in Europe and hosts both sites subject to natural protection constraints, as well as important industrial settlements. Consequently, the possibilities for these areas to become polluted are numerous. The sandhopper Talitrus saltator has proven to be a good bioindicator of contamination by numerous trace metals on some European coasts. Nevertheless, no data are available for the populations inhabiting the shores of the southern Mediterranean. Now, as metal accumulation has been shown to vary intraspecifically, the aim of this study was to evaluate trace metal accumulation in adults of T. saltator inhabiting Ionian coastal areas of Sicily and make an assessment of natural and anthropogenic metal pollution of this strip of coast. We also extended our survey to As, Co, Mo, Se, Sn and V never investigated before in this species. Significant differences in metal concentration among sites were found in both sand samples and amphipod tissues. The highest metal content was observed near the mouth of Simeto, the longest river of Sicily which collects waters coming from the volcanic territory of Mount Etna. The bioaccumulation of Cd, Cu, Hg and Zn in T. saltator is fully confirmed; it is also proven for As and Mo and assumed for Cr, Fe, Mn and V. Our outcomes let us to evaluate the prevailing influence of telluric contamination of the Ionian sandy shores of Sicily by trace metals. We also come to the conclusion that in the northern sites, pollution originates from volcanic emission while anthropogenic influence prevails in the southern ones.
High performances of thermosets deriving from their covalent intermolecular cross-link bonds resu... more High performances of thermosets deriving from their covalent intermolecular cross-link bonds result in their low recyclability hindering the full exploitation of a truly circular approach for cured thermosets. In this experimental work, the recyclability of a bio-based fully recyclable epoxy resin using a mild chemical recycling process was demonstrated. The recycled polymer obtained was fully characterized to ascertain its structure and properties. MALDI (Matrix-Assisted Laser Desorption/Ionization), GPC (Gel Permeation Chromatography) and NMR (Nuclear Magnetic Resonance) spectroscopy to determine the chemical structure of the recycled polymer were used. The thermomechanical properties of the cured virgin network and of the recycled product obtained were measured by DSC (Differential Scanning Calorimetry) and DMA (Dynamic Mechanical Analysis). Thermogravimetric analysis of the recycled polymer was also performed. The recycled polymer was transformed into a polyurethane by reacting ...
V INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES, 2010
Linear hyperbranched block copolymers based on PBA polyesters (HPBA) has been synthesized by a on... more Linear hyperbranched block copolymers based on PBA polyesters (HPBA) has been synthesized by a one-pot synthesis procedure and well characterized by MALDI-TOF mass spectrometry, H-NMR and SEC tools, to obtain reliable information on its chemical composition and molar mass distribution.
Abstract The presence of pharmaceuticals, such as non-steroidal anti-inflammatory drugs (NSAIDs) ... more Abstract The presence of pharmaceuticals, such as non-steroidal anti-inflammatory drugs (NSAIDs) in the aquatic environment represents a worldwide threat. NSAIDs are considered “emerging contaminants” of water since the traditional methods are not designed to efficiently remove them. Aiming to overcome the limits of the conventional wastewater treatment plants, we propose molecularly imprinted polymers (MIPs) as valid tools for selective adsorption and removal of these drugs from water. In particular, in this work, we have prepared diclofenac-selective MIP by a simple bulk polymerization process. After the characterization of the synthetized polymers, the binding abilities were evaluated in detail through the adsorption of diclofenac in aqueous solution and compared with the abilities of a corresponding non-imprinted polymer used as a reference. Thanks to the imprinting effect, the prepared MIP adsorbs with extreme selectivity its template molecule, i.e. the diclofenac. This effect was evaluated by testing the adsorption abilities towards different drugs, such as acetylsalicylic acid and trimethoprim. In addition, MIP reusability was demonstrated after a simple regeneration step. The strength of this work is due to the low cost synthesis of MIP and to its optimal performance of molecular recognition in water, differentially from many of the traditional MIPs, usually used with organic solvent. Such peculiarities make the material potentially applicable for water treatment on a large scale.
Rapid Communications in Mass Spectrometry, Nov 30, 1999
The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fra... more The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fractionation of samples through analytical size exclusion chromatography (SEC). Selected SEC fractions are then analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and the mass spectra of these nearly monodisperse samples allow the determination of the average molar masses. The SEC/MALDI procedure has now been applied to two polycarbonate samples, PC1 and PC2. The results show that the MALDI spectra of the SEC fractions allow not only the detection of linear and cyclic oligomers contained in these samples, but also the simultaneous determination of their average molar masses. Two slightly differing SEC calibration plots were obtained, due to the smaller hydrodynamic volume of the polycarbonate cyclic chains with respect to the linear ones. In agreement with theory, the ratio (M(cycle)/M(linear))(Ve) at a fixed elution volume was found to be 1.22, independent of the molar mass values. Copyright 1999 John Wiley & Sons, Ltd.
Rapid Communications in Mass Spectrometry, Nov 30, 1999
The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fra... more The determination of molar mass (MM) data for polydisperse polymers by SEC/MALDI involves the fractionation of samples through analytical size exclusion chromatography (SEC). Selected SEC fractions are then analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and the mass spectra of these nearly monodisperse samples allow the determination of the average molar masses. The SEC/MALDI procedure has now been applied to two polycarbonate samples, PC1 and PC2. The results show that the MALDI spectra of the SEC fractions allow not only the detection of linear and cyclic oligomers contained in these samples, but also the simultaneous determination of their average molar masses. Two slightly differing SEC calibration plots were obtained, due to the smaller hydrodynamic volume of the polycarbonate cyclic chains with respect to the linear ones. In agreement with theory, the ratio (M(cycle)/M(linear))(Ve) at a fixed elution volume was found to be 1.22, independent of the molar mass values. Copyright 1999 John Wiley & Sons, Ltd.
Ecotoxicology and Environmental Safety, Jul 1, 2016
The Ionian beaches of Sicily are of particular ecological interest because they include the basin... more The Ionian beaches of Sicily are of particular ecological interest because they include the basin of the largest active volcano in Europe and hosts both sites subject to natural protection constraints, as well as important industrial settlements. Consequently, the possibilities for these areas to become polluted are numerous. The sandhopper Talitrus saltator has proven to be a good bioindicator of contamination by numerous trace metals on some European coasts. Nevertheless, no data are available for the populations inhabiting the shores of the southern Mediterranean. Now, as metal accumulation has been shown to vary intraspecifically, the aim of this study was to evaluate trace metal accumulation in adults of T. saltator inhabiting Ionian coastal areas of Sicily and make an assessment of natural and anthropogenic metal pollution of this strip of coast. We also extended our survey to As, Co, Mo, Se, Sn and V never investigated before in this species. Significant differences in metal concentration among sites were found in both sand samples and amphipod tissues. The highest metal content was observed near the mouth of Simeto, the longest river of Sicily which collects waters coming from the volcanic territory of Mount Etna. The bioaccumulation of Cd, Cu, Hg and Zn in T. saltator is fully confirmed; it is also proven for As and Mo and assumed for Cr, Fe, Mn and V. Our outcomes let us to evaluate the prevailing influence of telluric contamination of the Ionian sandy shores of Sicily by trace metals. We also come to the conclusion that in the northern sites, pollution originates from volcanic emission while anthropogenic influence prevails in the southern ones.
High performances of thermosets deriving from their covalent intermolecular cross-link bonds resu... more High performances of thermosets deriving from their covalent intermolecular cross-link bonds result in their low recyclability hindering the full exploitation of a truly circular approach for cured thermosets. In this experimental work, the recyclability of a bio-based fully recyclable epoxy resin using a mild chemical recycling process was demonstrated. The recycled polymer obtained was fully characterized to ascertain its structure and properties. MALDI (Matrix-Assisted Laser Desorption/Ionization), GPC (Gel Permeation Chromatography) and NMR (Nuclear Magnetic Resonance) spectroscopy to determine the chemical structure of the recycled polymer were used. The thermomechanical properties of the cured virgin network and of the recycled product obtained were measured by DSC (Differential Scanning Calorimetry) and DMA (Dynamic Mechanical Analysis). Thermogravimetric analysis of the recycled polymer was also performed. The recycled polymer was transformed into a polyurethane by reacting ...
Uploads
Papers by Concetto Puglisi