Background: Evidence has been provided that a cell-based therapy combined with the use of bioacti... more Background: Evidence has been provided that a cell-based therapy combined with the use of bioactive materials may significantly improve bone regeneration prior to dental implant, although the identification of an ideal source of progenitor/stem cells remains to be determined. Aim: In the present research, the bone regenerative property of an emerging source of progenitor cells, the amniotic epithelial cells (AEC), loaded on a calcium-phosphate synthetic bone substitute, made by direct rapid prototyping (rPT) technique, was evaluated in an animal study. Material And Methods: Two blocks of synthetic bone substitute (,0.14 cm3), alone or engineered with 16106 ovine AEC (oAEC), were grafted bilaterally into maxillary sinuses of six adult sheep, an animal model chosen for its high translational value in dentistry. The sheep were then randomly divided into two groups and sacrificed at 45 and 90 days post implantation (p.i.). Tissue regeneration was evaluated in the sinus explants by micro...
The goal of the study is to evaluate if the use of rotary nickel-titanium (RNT) instruments, as H... more The goal of the study is to evaluate if the use of rotary nickel-titanium (RNT) instruments, as Hedstroem files, is safe. Twelve twisted files (TF) RNT instruments size 06-25 were selected and randomly divided in 2 groups of 6 instruments each. Group A (new instruments) were used as control. Group B (test) instruments were clinically used only as Hedstroem files in a canal that had been previously instrumented to the working length with other 06-25 RNT instruments. Group B instruments were used only in the straight portion of the canal (1 minute at 1000 rpm). A cyclic fatigue test was performed for each instrument of groups. Data were statistically analyzed (Student's t-test). Results showed no significant difference (P > 0.05) between groups A and B. Data confirmed that the use of TF instruments as Hedstroem files is a safe procedure. Cross section images and volumes of the same instrument, before and after cyclic fatigue testing, have been obtained by means of microtomograp...
X-ray computed microtomography (micro-CT, microComputerised Tomography) is a miniaturized form of... more X-ray computed microtomography (micro-CT, microComputerised Tomography) is a miniaturized form of conventional computerized axial tomography (CAT ). This sophisticated technology enables 3D riconstruction of the internal structure of small X-ray opaque objects without sample destruction or preparation. The aim of this study is to show the possible applications of micro-CT in the analysis of bone graft materials of different origins (i.e. homologous, heterologous, alloplastic) in order to define their morphometric properties by means of SkyScan 1072 3D microtomography system. Since there is a close relationship between the properties of the materials and their microstructure, it is necessary to examine them using the highest levels of resolution before being able to improve existing materials or create new products.
Nowadays, several adhesive systems are used in dental restoration and they are evaluated by clini... more Nowadays, several adhesive systems are used in dental restoration and they are evaluated by clinical research. In vitro evaluations are often made by means of traditional observation techniques (for example scanning electron microscope (SEM), while 3D cone-beam microtomography technique (3D micro-CT), that can be able to generate 3D sample images without any sample treatment during acquisition data, is going to be used a lot in the next few years. In dental cavity restored with composite, it is possible to predict the presence of gaps due to polymerization shrinkage; that is the reason this work purpose is to reveal by 3D images and measure by micro-CT analysis the voids generated applying the most used adhesive systems at the moment. By means of microtomographic analysis is proposed an aid to overcome bidimensional SEM investigation limits like random observation of sample surface, sample sectioning (to see inside it with the relative possible structural alterations induced on the ...
The purpose of this study was to demonstrate potential application of micro-computed tomography i... more The purpose of this study was to demonstrate potential application of micro-computed tomography in the morphometric analysis of the root resorption in extracted human first premolars subjected to the orthodontic force. In one patient treated in the orthodontic clinic two mandibular first premolars subjected to orthodontic force for 4 weeks and one control tooth were selected for micro-computed tomographic analysis. The hardware device used in this study was a desktop X-ray microfocus CT scanner (SkyScan 1072). The morphology of root's surfaces was assessed by TView and Computer Tomography Analyzer (CTAn) softwares (SkyScan, bvba) which allowed analysis of all microscans, identification of root resorption craters and measurement of their length, width and volume. Microscans showed in details the surface morphology of the investigated teeth. The analysis of microscans allowed to detect 3 root resorption cavities in each of the orthodontically moved tooth and only one resorption cr...
In this study a 3D microtomography display of tooth surfaces after in vitro dental wear tests has... more In this study a 3D microtomography display of tooth surfaces after in vitro dental wear tests has been obtained. Natural teeth have been compared with prosthetic teeth, manufactured by three different polyceramic composite materials. The prosthetic dental element samples, similar to molars, have been placed in opposition to human teeth extracted by paradontology diseases. After microtomography analysis, samples have been subjected to in vitro fatigue test cycles by servo-hydraulic mechanical testing machine. After the fatigue test, each sample has been subjected again to microtomography analysis to obtain volumetric value changes and dental wear surface images. Wear surface images were obtained by 3D reconstruction software and volumetric value changes were measured by CT analyser software. The aim of this work has been to show the potential of microtomography technique to display very clear and reliable wear surface images. Microtomography analysis methods to evaluate volumetric va...
The main issue to be faced to get size estimates of 3D modification of the dental canal after end... more The main issue to be faced to get size estimates of 3D modification of the dental canal after endodontic treatment is the co-registration of the image stacks obtained through micro computed tomography (micro-CT) scans before and after treatment. Here quantitative analysis of micro-CT images have been performed by means of new dedicated software targeted to the analysis of root canal after endodontic instrumentation. This software analytically calculates the best superposition between the pre and post structures using the inertia tensor of the tooth. This strategy avoid minimization procedures, which can be user dependent, and time consuming. Once the co-registration have been achieved dimensional measurements have then been performed by contemporary evaluation of quantitative parameters over the two superimposed stacks of micro-CT images. The software automatically calculated the changes of volume, surface and symmetry axes in 3D occurring after the instrumentation. The calculation ...
The structure and architecture of scaffolds are crucial factors in scaffolds-based tissue enginee... more The structure and architecture of scaffolds are crucial factors in scaffolds-based tissue engineering since they affect the functionality of the tissue engineering construct and the eventual application in health care. Therefore, effective scaffold assessment techniques are required right at the initial stages of research and development so as to select or design scaffolds with suitable properties. Furthermore, since the biological performances of a scaffold is evaluated with respect to its capacity of favouring cell adhesion, proliferation as well as production of extracellular matrix, it is important to have an analytical technique able to monitor the various stages of cell culture both in vitro and especially in vivo. Finally, the development of a vascular network inside the cell scaffold construct is a fundamental requisite for achieving a full integration of the developing tissue with the host tissue. Also in this respect it is mandatory to assess the propensity of the scaffold...
Micro-computed tomography (micro-CT) is a consolidated imaging technology allowing non-destructiv... more Micro-computed tomography (micro-CT) is a consolidated imaging technology allowing non-destructive three-dimensional (3D) qualitative and quantitative analysis by the observation of microstructures with high resolution. This paper aims at delivering a structured overview of literature about studies performed using micro-CT in dentistry and maxillofacial surgery (MFS) by analyzing the entire set of articles to portray the state of the art of the last ten years of scientific publications on the topic. It draws the scenario focusing on biomaterials, in vitro and in/ex vivo applications, bone structure analysis, and tissue engineering. It confirms the relevance of the micro-CT analysis for traditional research applications and mainly in dentistry with respect to MFS. Possible developments are discussed in relation to the use of the micro-CT combined with other, traditional, and not, techniques and technologies, as the elaboration of 3D models based on micro-CT images and emerging numeri...
The main purpose of the study is to assess a selection of commercially available bone biomaterial... more The main purpose of the study is to assess a selection of commercially available bone biomaterials substitutes used as scaffolds for tissue engineering applications in dentistry, performing a clinical study on human subjects and using the microcomputed tomography (micro-CT) analysis to investigate the main morphological and critical parameters of bone and biomaterials structures. Micro-CT was performed in both the phases, preclinical and clinical. In addition, it was combined with histology to analyze the extracted bone four months after implantation. Quantitative analysis of the main morphological parameters as the porosity, the bone volume fraction (BV/TV) and the trabecular thickness (Tb.Th) evidenced the main difference among the biomaterials properties and their influence on the bone tissue regeneration. Qualitative observations by the three-dimensional (3D) reconstruction of the microstructure, contributed to the visualization of the mineralized areas. The analyses conducted o...
Journal of the Mechanical Behavior of Biomedical Materials
Additive manufacturing for tissue engineering applications offers the possibility to design scaff... more Additive manufacturing for tissue engineering applications offers the possibility to design scaffolds characterized by a fine and detailed microarchitecture. Several fabrication technologies are currently available which allow to prepare tailored structures with a large selection of materials for restoring and healing tissues. However, 3D printed scaffolds are generally collected by assembling repetitive geometrical units or reproducing specific patterns in the layering direction, leading to a highly ordered architecture that does not mimic the morphology of the natural extracellular matrix (ECM), one of the main goals to be reached for an effective therapeutic approach. It is usually stated in the tissue engineering field that a scaffold has to be considered a temporary ECM, resembling all the peculiar features as close as possible and, in this regard, an ordered microstructure cannot be usually observed within biological tissues and organs. With the aim to overcame this limitation and offer a potential approach for bone tissue applications, the present study proposes a design methodology to fabricate 3D printed scaffolds characterized by a random microarchitecture which can be repeatedly reproduced thanks to the intrinsic controllable process of additive manufacturing. In this framework, four different models in polylactic acid were fabricated by means of fused deposition modelling, including a three-dimensional random distribution of spherical pores of 400, 500, and 600 μm for the first three cases, and a randomly varied distribution in the range 400-600 μm for the fourth case. A detailed assessment by means of microcomputed tomography and mechanical evaluation was then carried out in order to fully analyse the resulting scaffolds, providing both morphological and quantitative data.
Metabolism: clinical and experimental, Jan 9, 2018
Galectin-3 is constitutively expressed in bone cells and was recently shown to modulate osteogeni... more Galectin-3 is constitutively expressed in bone cells and was recently shown to modulate osteogenic transdifferentiation of vascular smooth muscle cells and atherosclerotic calcification. However, the role of galectin-3 in bone physiology is largely undefined. To address this issue, we analyzed (1) the skeletal features of 1-, 3- and 6-month-old galectin-3 null (Lgals3) and wild type (WT) mice and (2) the differentiation and function of osteoblasts and osteoclasts derived from these animals. Long bone phenotype, gene expression profile, and remodeling were investigated by micro-computed tomography, real time-PCR, static and dynamic histomorphometry, and assessment of biochemical markers of bone resorption and formation. Bone competence was also evaluated by biomechanical testing at 3 months. In vitro, the effects of galectin-3 deficiency on bone cell differentiation and function were investigated by assessing (a) gene expression of osteoblast markers, alkaline phosphatase activity, m...
The new record of a shallow-water submarine hydrothermal field (<150 m w.d.) in the western Me... more The new record of a shallow-water submarine hydrothermal field (<150 m w.d.) in the western Mediterranean Sea (Tyrrhenian Sea, Italy) allows us to study COfluid impact on benthic foraminifers. Benthic foraminifers calcification process is sensitive to ocean acidification and to local chemical and physical parameters of seawater and pore water. Thus, foraminifers can record specific environmental conditions related to hydrothermal fluids, but at present their response to such activity is poorly defined. The major outcome of this study is the finding of a very uncommon taxon for the Mediterranean Sea, i.e., the Spiculosiphon oceana, a giant foraminifer agglutinating spicules of sponges. This evidence, along with the strong decrease of calcareous tests in the foraminiferal assemblages associated to hydrothermal activity, provides new insights on the meiofauna living in natural stressed environment. In particular, observations obtained from this study allow us to consider S. oceana a...
The aim of this in vitro study was to evaluate the mechanical reliability of a dental implant sys... more The aim of this in vitro study was to evaluate the mechanical reliability of a dental implant system by testing its maximum fracture load and mechanical performance under cyclic fatigue stress. An experimental study according to the international standards (UNI EN ISO 14801: 2008) was performed using 13 implants (3.80 mm in diameter and 12 mm in length) with straight titanium abutments tightened to 30 N. Five samples were subjected to compression stress at break. Based on the mean fracture load value obtained in this test, the levels of dynamic loading range were set and were carried on at a frequency of 15 Hz for 5 × 10 cycles. The compression stress at break mean value of the tested implants was 430 N (SD ± 35.66 N). In the mechanical fatigue stress test, the fatigue limit for 5 × 10 load cycles was 172 N. The evaluated implant system proved to withstand considerable mechanical loads under the &amp;amp;amp;amp;amp;amp;quot;worst-case&amp;amp;amp;amp;amp;amp;quot; loading situation performed according to UNI EN ISO 14801 standard. The reliability of this test protocol makes it suitable to be accomplished for understanding and comparing mechanical properties of implant systems.
The presence of a microgap between implant and abutment could produce a bacterial reservoir which... more The presence of a microgap between implant and abutment could produce a bacterial reservoir which could interfere with the long-term health of the periimplant tissues. The aim of this article was to evaluate, by x-ray 3-dimensional microtomography, implant-abutment contact surfaces and microgaps at the implant-abutment interface in different types of implant-abutment connections. A total of 40 implants were used in this in vitro study. Ten implants presented a screw-retained internal hexagon abutment (group I), 10 had a Morse Cone taper internal connection (group II), 10 another type of Morse Cone taper internal connection (group III), and 10 had a screwed trilobed connection (group IV). In both types of Morse Cone internal connections, there was no detectable separation at the implant-abutment in the area of the conical connection, and there was an absolute congruity without any microgaps between abutment and implant. No line was visible separating the implant and the abutment. On ...
Microgap is defined as the microscopic space that exists between the implant body and abutment. T... more Microgap is defined as the microscopic space that exists between the implant body and abutment. The main mechanism proposed for microgap-related crestal bone loss is the role of this space as a trap for bacteria and thus, as a putative etiological factor for inflammatory reaction in the peri-implant soft tissues. The aim of this paper was to evaluate, with X-ray 3D microtomography, the microscopic space that exists between the implant body and abutment with internal hexagon versus cone morse. A total of 20 implants were used in this in vitro study. Ten implants per group were used. Ten implants presented a screw retained internal hexagon abutment (Group I) and 10 had a Cone Morse taper internal connection (Group II). In both types of Cone Morse internal connection implants there was no detectable separation at the implant/abutment in the area of the conical connection, and there was an absolute congruity without any microgaps between abutment and implant. No line was visible separating the implant and the abutment. On the contrary, in the internal hexagon screwed abutment numerous gaps and voids were present between the implant body and abutment. The results of the present study seem, then, to support the hypothesis that the length and the characteristics of the implant-abutment joint could be a reason for the observed differences in mechanical stability.
Background: Evidence has been provided that a cell-based therapy combined with the use of bioacti... more Background: Evidence has been provided that a cell-based therapy combined with the use of bioactive materials may significantly improve bone regeneration prior to dental implant, although the identification of an ideal source of progenitor/stem cells remains to be determined. Aim: In the present research, the bone regenerative property of an emerging source of progenitor cells, the amniotic epithelial cells (AEC), loaded on a calcium-phosphate synthetic bone substitute, made by direct rapid prototyping (rPT) technique, was evaluated in an animal study. Material And Methods: Two blocks of synthetic bone substitute (,0.14 cm3), alone or engineered with 16106 ovine AEC (oAEC), were grafted bilaterally into maxillary sinuses of six adult sheep, an animal model chosen for its high translational value in dentistry. The sheep were then randomly divided into two groups and sacrificed at 45 and 90 days post implantation (p.i.). Tissue regeneration was evaluated in the sinus explants by micro...
The goal of the study is to evaluate if the use of rotary nickel-titanium (RNT) instruments, as H... more The goal of the study is to evaluate if the use of rotary nickel-titanium (RNT) instruments, as Hedstroem files, is safe. Twelve twisted files (TF) RNT instruments size 06-25 were selected and randomly divided in 2 groups of 6 instruments each. Group A (new instruments) were used as control. Group B (test) instruments were clinically used only as Hedstroem files in a canal that had been previously instrumented to the working length with other 06-25 RNT instruments. Group B instruments were used only in the straight portion of the canal (1 minute at 1000 rpm). A cyclic fatigue test was performed for each instrument of groups. Data were statistically analyzed (Student's t-test). Results showed no significant difference (P > 0.05) between groups A and B. Data confirmed that the use of TF instruments as Hedstroem files is a safe procedure. Cross section images and volumes of the same instrument, before and after cyclic fatigue testing, have been obtained by means of microtomograp...
X-ray computed microtomography (micro-CT, microComputerised Tomography) is a miniaturized form of... more X-ray computed microtomography (micro-CT, microComputerised Tomography) is a miniaturized form of conventional computerized axial tomography (CAT ). This sophisticated technology enables 3D riconstruction of the internal structure of small X-ray opaque objects without sample destruction or preparation. The aim of this study is to show the possible applications of micro-CT in the analysis of bone graft materials of different origins (i.e. homologous, heterologous, alloplastic) in order to define their morphometric properties by means of SkyScan 1072 3D microtomography system. Since there is a close relationship between the properties of the materials and their microstructure, it is necessary to examine them using the highest levels of resolution before being able to improve existing materials or create new products.
Nowadays, several adhesive systems are used in dental restoration and they are evaluated by clini... more Nowadays, several adhesive systems are used in dental restoration and they are evaluated by clinical research. In vitro evaluations are often made by means of traditional observation techniques (for example scanning electron microscope (SEM), while 3D cone-beam microtomography technique (3D micro-CT), that can be able to generate 3D sample images without any sample treatment during acquisition data, is going to be used a lot in the next few years. In dental cavity restored with composite, it is possible to predict the presence of gaps due to polymerization shrinkage; that is the reason this work purpose is to reveal by 3D images and measure by micro-CT analysis the voids generated applying the most used adhesive systems at the moment. By means of microtomographic analysis is proposed an aid to overcome bidimensional SEM investigation limits like random observation of sample surface, sample sectioning (to see inside it with the relative possible structural alterations induced on the ...
The purpose of this study was to demonstrate potential application of micro-computed tomography i... more The purpose of this study was to demonstrate potential application of micro-computed tomography in the morphometric analysis of the root resorption in extracted human first premolars subjected to the orthodontic force. In one patient treated in the orthodontic clinic two mandibular first premolars subjected to orthodontic force for 4 weeks and one control tooth were selected for micro-computed tomographic analysis. The hardware device used in this study was a desktop X-ray microfocus CT scanner (SkyScan 1072). The morphology of root's surfaces was assessed by TView and Computer Tomography Analyzer (CTAn) softwares (SkyScan, bvba) which allowed analysis of all microscans, identification of root resorption craters and measurement of their length, width and volume. Microscans showed in details the surface morphology of the investigated teeth. The analysis of microscans allowed to detect 3 root resorption cavities in each of the orthodontically moved tooth and only one resorption cr...
In this study a 3D microtomography display of tooth surfaces after in vitro dental wear tests has... more In this study a 3D microtomography display of tooth surfaces after in vitro dental wear tests has been obtained. Natural teeth have been compared with prosthetic teeth, manufactured by three different polyceramic composite materials. The prosthetic dental element samples, similar to molars, have been placed in opposition to human teeth extracted by paradontology diseases. After microtomography analysis, samples have been subjected to in vitro fatigue test cycles by servo-hydraulic mechanical testing machine. After the fatigue test, each sample has been subjected again to microtomography analysis to obtain volumetric value changes and dental wear surface images. Wear surface images were obtained by 3D reconstruction software and volumetric value changes were measured by CT analyser software. The aim of this work has been to show the potential of microtomography technique to display very clear and reliable wear surface images. Microtomography analysis methods to evaluate volumetric va...
The main issue to be faced to get size estimates of 3D modification of the dental canal after end... more The main issue to be faced to get size estimates of 3D modification of the dental canal after endodontic treatment is the co-registration of the image stacks obtained through micro computed tomography (micro-CT) scans before and after treatment. Here quantitative analysis of micro-CT images have been performed by means of new dedicated software targeted to the analysis of root canal after endodontic instrumentation. This software analytically calculates the best superposition between the pre and post structures using the inertia tensor of the tooth. This strategy avoid minimization procedures, which can be user dependent, and time consuming. Once the co-registration have been achieved dimensional measurements have then been performed by contemporary evaluation of quantitative parameters over the two superimposed stacks of micro-CT images. The software automatically calculated the changes of volume, surface and symmetry axes in 3D occurring after the instrumentation. The calculation ...
The structure and architecture of scaffolds are crucial factors in scaffolds-based tissue enginee... more The structure and architecture of scaffolds are crucial factors in scaffolds-based tissue engineering since they affect the functionality of the tissue engineering construct and the eventual application in health care. Therefore, effective scaffold assessment techniques are required right at the initial stages of research and development so as to select or design scaffolds with suitable properties. Furthermore, since the biological performances of a scaffold is evaluated with respect to its capacity of favouring cell adhesion, proliferation as well as production of extracellular matrix, it is important to have an analytical technique able to monitor the various stages of cell culture both in vitro and especially in vivo. Finally, the development of a vascular network inside the cell scaffold construct is a fundamental requisite for achieving a full integration of the developing tissue with the host tissue. Also in this respect it is mandatory to assess the propensity of the scaffold...
Micro-computed tomography (micro-CT) is a consolidated imaging technology allowing non-destructiv... more Micro-computed tomography (micro-CT) is a consolidated imaging technology allowing non-destructive three-dimensional (3D) qualitative and quantitative analysis by the observation of microstructures with high resolution. This paper aims at delivering a structured overview of literature about studies performed using micro-CT in dentistry and maxillofacial surgery (MFS) by analyzing the entire set of articles to portray the state of the art of the last ten years of scientific publications on the topic. It draws the scenario focusing on biomaterials, in vitro and in/ex vivo applications, bone structure analysis, and tissue engineering. It confirms the relevance of the micro-CT analysis for traditional research applications and mainly in dentistry with respect to MFS. Possible developments are discussed in relation to the use of the micro-CT combined with other, traditional, and not, techniques and technologies, as the elaboration of 3D models based on micro-CT images and emerging numeri...
The main purpose of the study is to assess a selection of commercially available bone biomaterial... more The main purpose of the study is to assess a selection of commercially available bone biomaterials substitutes used as scaffolds for tissue engineering applications in dentistry, performing a clinical study on human subjects and using the microcomputed tomography (micro-CT) analysis to investigate the main morphological and critical parameters of bone and biomaterials structures. Micro-CT was performed in both the phases, preclinical and clinical. In addition, it was combined with histology to analyze the extracted bone four months after implantation. Quantitative analysis of the main morphological parameters as the porosity, the bone volume fraction (BV/TV) and the trabecular thickness (Tb.Th) evidenced the main difference among the biomaterials properties and their influence on the bone tissue regeneration. Qualitative observations by the three-dimensional (3D) reconstruction of the microstructure, contributed to the visualization of the mineralized areas. The analyses conducted o...
Journal of the Mechanical Behavior of Biomedical Materials
Additive manufacturing for tissue engineering applications offers the possibility to design scaff... more Additive manufacturing for tissue engineering applications offers the possibility to design scaffolds characterized by a fine and detailed microarchitecture. Several fabrication technologies are currently available which allow to prepare tailored structures with a large selection of materials for restoring and healing tissues. However, 3D printed scaffolds are generally collected by assembling repetitive geometrical units or reproducing specific patterns in the layering direction, leading to a highly ordered architecture that does not mimic the morphology of the natural extracellular matrix (ECM), one of the main goals to be reached for an effective therapeutic approach. It is usually stated in the tissue engineering field that a scaffold has to be considered a temporary ECM, resembling all the peculiar features as close as possible and, in this regard, an ordered microstructure cannot be usually observed within biological tissues and organs. With the aim to overcame this limitation and offer a potential approach for bone tissue applications, the present study proposes a design methodology to fabricate 3D printed scaffolds characterized by a random microarchitecture which can be repeatedly reproduced thanks to the intrinsic controllable process of additive manufacturing. In this framework, four different models in polylactic acid were fabricated by means of fused deposition modelling, including a three-dimensional random distribution of spherical pores of 400, 500, and 600 μm for the first three cases, and a randomly varied distribution in the range 400-600 μm for the fourth case. A detailed assessment by means of microcomputed tomography and mechanical evaluation was then carried out in order to fully analyse the resulting scaffolds, providing both morphological and quantitative data.
Metabolism: clinical and experimental, Jan 9, 2018
Galectin-3 is constitutively expressed in bone cells and was recently shown to modulate osteogeni... more Galectin-3 is constitutively expressed in bone cells and was recently shown to modulate osteogenic transdifferentiation of vascular smooth muscle cells and atherosclerotic calcification. However, the role of galectin-3 in bone physiology is largely undefined. To address this issue, we analyzed (1) the skeletal features of 1-, 3- and 6-month-old galectin-3 null (Lgals3) and wild type (WT) mice and (2) the differentiation and function of osteoblasts and osteoclasts derived from these animals. Long bone phenotype, gene expression profile, and remodeling were investigated by micro-computed tomography, real time-PCR, static and dynamic histomorphometry, and assessment of biochemical markers of bone resorption and formation. Bone competence was also evaluated by biomechanical testing at 3 months. In vitro, the effects of galectin-3 deficiency on bone cell differentiation and function were investigated by assessing (a) gene expression of osteoblast markers, alkaline phosphatase activity, m...
The new record of a shallow-water submarine hydrothermal field (<150 m w.d.) in the western Me... more The new record of a shallow-water submarine hydrothermal field (<150 m w.d.) in the western Mediterranean Sea (Tyrrhenian Sea, Italy) allows us to study COfluid impact on benthic foraminifers. Benthic foraminifers calcification process is sensitive to ocean acidification and to local chemical and physical parameters of seawater and pore water. Thus, foraminifers can record specific environmental conditions related to hydrothermal fluids, but at present their response to such activity is poorly defined. The major outcome of this study is the finding of a very uncommon taxon for the Mediterranean Sea, i.e., the Spiculosiphon oceana, a giant foraminifer agglutinating spicules of sponges. This evidence, along with the strong decrease of calcareous tests in the foraminiferal assemblages associated to hydrothermal activity, provides new insights on the meiofauna living in natural stressed environment. In particular, observations obtained from this study allow us to consider S. oceana a...
The aim of this in vitro study was to evaluate the mechanical reliability of a dental implant sys... more The aim of this in vitro study was to evaluate the mechanical reliability of a dental implant system by testing its maximum fracture load and mechanical performance under cyclic fatigue stress. An experimental study according to the international standards (UNI EN ISO 14801: 2008) was performed using 13 implants (3.80 mm in diameter and 12 mm in length) with straight titanium abutments tightened to 30 N. Five samples were subjected to compression stress at break. Based on the mean fracture load value obtained in this test, the levels of dynamic loading range were set and were carried on at a frequency of 15 Hz for 5 × 10 cycles. The compression stress at break mean value of the tested implants was 430 N (SD ± 35.66 N). In the mechanical fatigue stress test, the fatigue limit for 5 × 10 load cycles was 172 N. The evaluated implant system proved to withstand considerable mechanical loads under the &amp;amp;amp;amp;amp;amp;quot;worst-case&amp;amp;amp;amp;amp;amp;quot; loading situation performed according to UNI EN ISO 14801 standard. The reliability of this test protocol makes it suitable to be accomplished for understanding and comparing mechanical properties of implant systems.
The presence of a microgap between implant and abutment could produce a bacterial reservoir which... more The presence of a microgap between implant and abutment could produce a bacterial reservoir which could interfere with the long-term health of the periimplant tissues. The aim of this article was to evaluate, by x-ray 3-dimensional microtomography, implant-abutment contact surfaces and microgaps at the implant-abutment interface in different types of implant-abutment connections. A total of 40 implants were used in this in vitro study. Ten implants presented a screw-retained internal hexagon abutment (group I), 10 had a Morse Cone taper internal connection (group II), 10 another type of Morse Cone taper internal connection (group III), and 10 had a screwed trilobed connection (group IV). In both types of Morse Cone internal connections, there was no detectable separation at the implant-abutment in the area of the conical connection, and there was an absolute congruity without any microgaps between abutment and implant. No line was visible separating the implant and the abutment. On ...
Microgap is defined as the microscopic space that exists between the implant body and abutment. T... more Microgap is defined as the microscopic space that exists between the implant body and abutment. The main mechanism proposed for microgap-related crestal bone loss is the role of this space as a trap for bacteria and thus, as a putative etiological factor for inflammatory reaction in the peri-implant soft tissues. The aim of this paper was to evaluate, with X-ray 3D microtomography, the microscopic space that exists between the implant body and abutment with internal hexagon versus cone morse. A total of 20 implants were used in this in vitro study. Ten implants per group were used. Ten implants presented a screw retained internal hexagon abutment (Group I) and 10 had a Cone Morse taper internal connection (Group II). In both types of Cone Morse internal connection implants there was no detectable separation at the implant/abutment in the area of the conical connection, and there was an absolute congruity without any microgaps between abutment and implant. No line was visible separating the implant and the abutment. On the contrary, in the internal hexagon screwed abutment numerous gaps and voids were present between the implant body and abutment. The results of the present study seem, then, to support the hypothesis that the length and the characteristics of the implant-abutment joint could be a reason for the observed differences in mechanical stability.
Uploads