To address the requirement for three-phase inverters in microgrid systems or sustainable-powered ... more To address the requirement for three-phase inverters in microgrid systems or sustainable-powered industrial facilities, a MOSFET-based three-phase inverter is designed and implemented, which can convert DC power into three-phase AC. The designed system produces 223V square (AC) waves at each phase from a 12V battery (DC) through switching of three stages of power MOSFETs using PWM signals at their gates from an Arduino Uno R3. Each stage of MOSFETs consists of six MOSFETs making it eighteen in total, which are used to perform the inversion process separately for each of three single-phase connections. The system is programmed through the Arduino Uno to generate the PWM signals and to keep 120 degrees phase displacement among each phase. Three center-tapped step-up transformers are used at the outputs of MOSFET stages for signal amplification. Using a 60W incandescent light bulb at each phase as a load, the system produces 386.2SV of voltage for three-phase line, delivering 0.58A of ...
Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power g... more Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power generation from sustainable energy based microgrids. And to address the necessity of three-phase inverters in microgrid systems or sustainable-powered households, an Arduino-based three-phase inverter using MOSFET is designed, which converts DC into three-phase AC power. The designed system generates 223V square signals at each phase from a 12V battery through switching of three stages of power MOSFETs using pulse width modulation (PWM) signals at their gates from an Arduino Uno. Each stage of power MOSFETs consists of six transistors making it eighteen in total, which are used to perform the inversion process separately for each three single-phase connections. The system is programmed using an Arduino Uno to generate PWM signals and to keep 120 degrees phase displacement among each phase. Three step-up transformers are coupled at the outputs of MOSFET stages for amplification. The system...
International Journal of Electrical and Electronic Engineering & Telecommunications, 2021
Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power g... more Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power generation from sustainable energy based microgrids. And to address the necessity of three-phase inverters in microgrid systems or sustainable-powered households, an Arduino-based three-phase inverter using MOSFET is designed, which converts DC into three-phase AC power. The designed system generates 223V square signals at each phase from a 12V battery through switching of three stages of power MOSFETs using pulse width modulation (PWM) signals at their gates from an Arduino Uno. Each stage of power MOSFETs consists of six transistors making it eighteen in total, which are used to perform the inversion process separately for each three single-phase connections. The system is programmed using an Arduino Uno to generate PWM signals and to keep 120 degrees phase displacement among each phase. Three step-up transformers are coupled at the outputs of MOSFET stages for amplification. The system...
To address the requirement for three-phase inverters in microgrid systems or sustainable-powered ... more To address the requirement for three-phase inverters in microgrid systems or sustainable-powered industrial facilities, a MOSFET-based three-phase inverter is designed and implemented, which can convert DC power into three-phase AC. The designed system produces 223V square (AC) waves at each phase from a 12V battery (DC) through switching of three stages of power MOSFETs using PWM signals at their gates from an Arduino Uno R3. Each stage of MOSFETs consists of six MOSFETs making it eighteen in total, which are used to perform the inversion process separately for each of three single-phase connections. The system is programmed through the Arduino Uno to generate the PWM signals and to keep 120 degrees phase displacement among each phase. Three center-tapped step-up transformers are used at the outputs of MOSFET stages for signal amplification. Using a 60W incandescent light bulb at each phase as a load, the system produces 386.2SV of voltage for three-phase line, delivering 0.58A of ...
Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power g... more Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power generation from sustainable energy based microgrids. And to address the necessity of three-phase inverters in microgrid systems or sustainable-powered households, an Arduino-based three-phase inverter using MOSFET is designed, which converts DC into three-phase AC power. The designed system generates 223V square signals at each phase from a 12V battery through switching of three stages of power MOSFETs using pulse width modulation (PWM) signals at their gates from an Arduino Uno. Each stage of power MOSFETs consists of six transistors making it eighteen in total, which are used to perform the inversion process separately for each three single-phase connections. The system is programmed using an Arduino Uno to generate PWM signals and to keep 120 degrees phase displacement among each phase. Three step-up transformers are coupled at the outputs of MOSFET stages for amplification. The system...
International Journal of Electrical and Electronic Engineering & Telecommunications, 2021
Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power g... more Rapid depletion of fossil fuel reserves, and concerns over climate change have encouraged power generation from sustainable energy based microgrids. And to address the necessity of three-phase inverters in microgrid systems or sustainable-powered households, an Arduino-based three-phase inverter using MOSFET is designed, which converts DC into three-phase AC power. The designed system generates 223V square signals at each phase from a 12V battery through switching of three stages of power MOSFETs using pulse width modulation (PWM) signals at their gates from an Arduino Uno. Each stage of power MOSFETs consists of six transistors making it eighteen in total, which are used to perform the inversion process separately for each three single-phase connections. The system is programmed using an Arduino Uno to generate PWM signals and to keep 120 degrees phase displacement among each phase. Three step-up transformers are coupled at the outputs of MOSFET stages for amplification. The system...
Uploads