Wire arc additive manufacturing (WAAM) which is literally based on continuously fed material depo... more Wire arc additive manufacturing (WAAM) which is literally based on continuously fed material deposition type of welding processes such as metal inert gas (MIG), tungsten inert gas (TIG) and plasma welding, is a variant of additive manufacturing technologies. WAAM steps forward with its high deposition rate and low equipment cost as compared to the powder feed and laser/electron beam heated processes among various additive manufacturing processes. In this work, sample parts made of low allow high strength steel (ER120S-G) was additively manufactured via WAAM method using robotic cold metal transfer technology (CMT). The process parameters and building strategies were investigated and correlated with the geometrical, metallurgical and mechanical properties on the produced wall geometries. The results obtained from the thin wall sample parts have showed that with increasing heat input, mechanical properties decreases, since higher heat accumulation and lower cooling rate increases the ...
Wire arc additive manufacturing (WAAM) which is literally based on continuously fed material depo... more Wire arc additive manufacturing (WAAM) which is literally based on continuously fed material deposition type of welding processes such as metal inert gas (MIG), tungsten inert gas (TIG) and plasma welding, is a variant of additive manufacturing technologies. WAAM steps forward with its high deposition rate and low equipment cost as compared to the powder feed and laser/electron beam heated processes among various additive manufacturing processes. In this work, sample parts made of low allow high strength steel (ER120S-G) was additively manufactured via WAAM method using robotic cold metal transfer technology (CMT). The process parameters and building strategies were investigated and correlated with the geometrical, metallurgical and mechanical properties on the produced wall geometries. The results obtained from the thin wall sample parts have showed that with increasing heat input, mechanical properties decreases, since higher heat accumulation and lower cooling rate increases the ...
Uploads
Papers by Oguzhan Yilmaz