BackgroundMost of the studies about the effects of incline on cross-country skiing are related to... more BackgroundMost of the studies about the effects of incline on cross-country skiing are related to the metabolic efficiency. The effective skiing biomechanics has also been indicated to be among the key factors that may promote good performance. The aims of this study were to provide biomechanical characteristics and investigate the relative contribution and effectiveness of ski and pole forces in overcoming the total external resistance with double poling (DP) and Gear 3 (G3) techniques at varying moderate uphill inclines.Methods10 male cross-country skiers participated in this study. Custom-made force measurement bindings, pole force sensors, and an 8-camera Vicon system were used to collect force data and ski and pole kinematics at 3°, 4° and 5° with 10 km/h skiing speed.ResultsThe cycle length (CL) decreased by 10% and 7% with DP and G3 technique from 3° to 5° (p < 0.001, p < 0.001). The cycle rate (CR) increased by 13% and 9% from 3° to 5° with DP and G3 technique respecti...
Several methods could be used to measure the forces from skis or roller skis in cross-country ski... more Several methods could be used to measure the forces from skis or roller skis in cross-country skiing. Equipment that could measure medio-lateral forces may be of good help for investigating the relevant skating techniques. The aim of this study was to validate a pair of newly designed two-dimensional force measurement roller skis. The vertical and medio-lateral forces which were perpendicular to the body of the roller ski could be measured. Forces were resolved into the global coordinate system and compared with the force components measured by a force plate. A static and dynamic loading situation for the force measurement roller ski was performed to reveal the validity of the system. To demonstrate whether the force measurement roller ski would affect roller skiing performance on a treadmill, a maximum speed test with the V2 technique was performed by using both normal and force measurement roller skis. The force-time curves obtained by these two different force measurement systems...
This study evaluated two approaches for estimating the total propulsive force on a skier’s center... more This study evaluated two approaches for estimating the total propulsive force on a skier’s center of mass (COM) with double-poling (DP) and V2-skating (V2) skiing techniques. We also assessed the accuracy and the stability of each approach by changing the speed and the incline of the treadmill. A total of 10 cross-country skiers participated in this study. Force measurement bindings, pole force sensors, and an eight-camera Vicon system were used for data collection. The coefficient of multiple correlation (CMC) was calculated to evaluate the similarity between the force curves. Mean absolute force differences between the estimated values and the reference value were computed to evaluate the accuracy of each approach. In both DP and V2 techniques, the force–time curves of the forward component of the translational force were similar to the reference value (CMC: 0.832–0.936). The similarity between the force and time curves of the forward component of the ground reaction force (GRF) a...
Study aim: The aim of this study was to evaluate if young female skiers meet their energy and mac... more Study aim: The aim of this study was to evaluate if young female skiers meet their energy and macronutrient requirements, and how energy availability (EA) and macronutrient intake affects their performance during an intensive training camp. Material and methods: 19 female cross-country skiers (age 16.7 ± 0.7) filled in 48-hour food and training logs during a 5-day training camp. Fasting concentrations of hemoglobin, leptin, triiodothyronine (T3), insulin, insulin-like growth factor 1 (IGF-1), and glucose were measured before (PRE) and after (POST) the camp. Blood lactate (LA), heart rate (HR) and rating of perceived exertion (RPE) from a submaximal treadmill running test, jump height from counter movement jump (CMJ), and power from a reactive jump test (RJ) were also measured PRE and POST. Results: Mean EA was 40.3 ± 17.3 kcal · kgFFM–1 · d–1. 58% of the participants had suboptimal EA, 37% had low EA, and 53% had suboptimal carbohydrate intake. HR, HR/RPE ratio, LA/RPE ratio, CMJ, h...
Cross-country (XC) ski races involve a variety of formats, two different techniques and tracks wi... more Cross-country (XC) ski races involve a variety of formats, two different techniques and tracks with highly variable topography and environmental conditions. In addition, XC skiing is a major component of both Nordic combined and biathlon competitions. Research in this area, both in the laboratory and field, encounters certain difficulties that may reduce the reliability and validity of the data obtained, as well as complicate comparisons between studies. Here, 13 international experts propose specific guidelines designed to enhance the quality of research and publications on XC skiing, as well as on the biathlon and Nordic combined skiing. We consider biomechanical (kinematic, kinetic and neuromuscular) and physiological methodology (at the systemic and/or muscle level), providing recommendations for standardization/control of the experimental setup. We describe the types of measuring equipment and technology that are most suitable in this context. Moreover, we also deal with certai...
Cross-country skiing (XCS) embraces a broad variety of techniques applied like a gear system acco... more Cross-country skiing (XCS) embraces a broad variety of techniques applied like a gear system according to external conditions, slope topography, and skier-related factors. The continuous detection of applied skiing techniques and cycle characteristics by application of unobtrusive sensor technology can provide useful information to enhance the quality of training and competition. (1) Background: We evaluated the possibility of using a high-precision kinematic global navigation satellite system (GNSS) to detect cross-country skiing classical style technique. (2) Methods: A world-class male XC skier was analyzed during a classical style 5.3-km time trial recorded with a high-precision kinematic GNSS attached to the skier’s head. A video camera was mounted on the lumbar region of the skier to detect the type and number of cycles of each technique used during the entire time trial. Based on the GNSS trajectory, distinct patterns of head displacement (up-down head motion) for each classi...
BackgroundMost of the studies about the effects of incline on cross-country skiing are related to... more BackgroundMost of the studies about the effects of incline on cross-country skiing are related to the metabolic efficiency. The effective skiing biomechanics has also been indicated to be among the key factors that may promote good performance. The aims of this study were to provide biomechanical characteristics and investigate the relative contribution and effectiveness of ski and pole forces in overcoming the total external resistance with double poling (DP) and Gear 3 (G3) techniques at varying moderate uphill inclines.Methods10 male cross-country skiers participated in this study. Custom-made force measurement bindings, pole force sensors, and an 8-camera Vicon system were used to collect force data and ski and pole kinematics at 3°, 4° and 5° with 10 km/h skiing speed.ResultsThe cycle length (CL) decreased by 10% and 7% with DP and G3 technique from 3° to 5° (p < 0.001, p < 0.001). The cycle rate (CR) increased by 13% and 9% from 3° to 5° with DP and G3 technique respecti...
Several methods could be used to measure the forces from skis or roller skis in cross-country ski... more Several methods could be used to measure the forces from skis or roller skis in cross-country skiing. Equipment that could measure medio-lateral forces may be of good help for investigating the relevant skating techniques. The aim of this study was to validate a pair of newly designed two-dimensional force measurement roller skis. The vertical and medio-lateral forces which were perpendicular to the body of the roller ski could be measured. Forces were resolved into the global coordinate system and compared with the force components measured by a force plate. A static and dynamic loading situation for the force measurement roller ski was performed to reveal the validity of the system. To demonstrate whether the force measurement roller ski would affect roller skiing performance on a treadmill, a maximum speed test with the V2 technique was performed by using both normal and force measurement roller skis. The force-time curves obtained by these two different force measurement systems...
This study evaluated two approaches for estimating the total propulsive force on a skier’s center... more This study evaluated two approaches for estimating the total propulsive force on a skier’s center of mass (COM) with double-poling (DP) and V2-skating (V2) skiing techniques. We also assessed the accuracy and the stability of each approach by changing the speed and the incline of the treadmill. A total of 10 cross-country skiers participated in this study. Force measurement bindings, pole force sensors, and an eight-camera Vicon system were used for data collection. The coefficient of multiple correlation (CMC) was calculated to evaluate the similarity between the force curves. Mean absolute force differences between the estimated values and the reference value were computed to evaluate the accuracy of each approach. In both DP and V2 techniques, the force–time curves of the forward component of the translational force were similar to the reference value (CMC: 0.832–0.936). The similarity between the force and time curves of the forward component of the ground reaction force (GRF) a...
Study aim: The aim of this study was to evaluate if young female skiers meet their energy and mac... more Study aim: The aim of this study was to evaluate if young female skiers meet their energy and macronutrient requirements, and how energy availability (EA) and macronutrient intake affects their performance during an intensive training camp. Material and methods: 19 female cross-country skiers (age 16.7 ± 0.7) filled in 48-hour food and training logs during a 5-day training camp. Fasting concentrations of hemoglobin, leptin, triiodothyronine (T3), insulin, insulin-like growth factor 1 (IGF-1), and glucose were measured before (PRE) and after (POST) the camp. Blood lactate (LA), heart rate (HR) and rating of perceived exertion (RPE) from a submaximal treadmill running test, jump height from counter movement jump (CMJ), and power from a reactive jump test (RJ) were also measured PRE and POST. Results: Mean EA was 40.3 ± 17.3 kcal · kgFFM–1 · d–1. 58% of the participants had suboptimal EA, 37% had low EA, and 53% had suboptimal carbohydrate intake. HR, HR/RPE ratio, LA/RPE ratio, CMJ, h...
Cross-country (XC) ski races involve a variety of formats, two different techniques and tracks wi... more Cross-country (XC) ski races involve a variety of formats, two different techniques and tracks with highly variable topography and environmental conditions. In addition, XC skiing is a major component of both Nordic combined and biathlon competitions. Research in this area, both in the laboratory and field, encounters certain difficulties that may reduce the reliability and validity of the data obtained, as well as complicate comparisons between studies. Here, 13 international experts propose specific guidelines designed to enhance the quality of research and publications on XC skiing, as well as on the biathlon and Nordic combined skiing. We consider biomechanical (kinematic, kinetic and neuromuscular) and physiological methodology (at the systemic and/or muscle level), providing recommendations for standardization/control of the experimental setup. We describe the types of measuring equipment and technology that are most suitable in this context. Moreover, we also deal with certai...
Cross-country skiing (XCS) embraces a broad variety of techniques applied like a gear system acco... more Cross-country skiing (XCS) embraces a broad variety of techniques applied like a gear system according to external conditions, slope topography, and skier-related factors. The continuous detection of applied skiing techniques and cycle characteristics by application of unobtrusive sensor technology can provide useful information to enhance the quality of training and competition. (1) Background: We evaluated the possibility of using a high-precision kinematic global navigation satellite system (GNSS) to detect cross-country skiing classical style technique. (2) Methods: A world-class male XC skier was analyzed during a classical style 5.3-km time trial recorded with a high-precision kinematic GNSS attached to the skier’s head. A video camera was mounted on the lumbar region of the skier to detect the type and number of cycles of each technique used during the entire time trial. Based on the GNSS trajectory, distinct patterns of head displacement (up-down head motion) for each classi...
Uploads
Papers by Olli Ohtonen