Abstract
This work proposes a procedure for the determination of the interferences between balls and raceways in four-contact-point slewing bearings due to manufacturing errors. The procedure is applied to a particular case and finite element analyses are performed for the friction moment calculation, considering different preloads. The results are used to evaluate the influence of manufacturing errors in the friction torque of the bearing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Aguirrebeitia, J., Plaza, J., Abasolo, M., Vallejo, J.: General static load-carrying capacity of four-contact-point slewing bearings for wind turbine generator actuation systems. Wind Energy 16(5), 759–774 (2012)
Aguirrebeitia, J., Abasolo, M., Avilés, R., Fernández de Bustos, I.: General static load-carrying capacity for the design and selection of four contact point slewing bearings: finite element calculations and theoretical model validation. Finite Elem. Anal. Des. 55, 23–30 (2012)
Aguirrebeitia, J., Plaza, J., Abasolo, M., Vallejo, J.: Effect of the preload in the general static load-carrying capacity of four-contact-point slewing bearings for wind turbine generators theoretical model and fin. Wind Energy 17(10), 1605–1621 (2013)
Aguirrebeitia, J., Abasolo, M., Plaza, J., Heras, I.: FEM model for friction moment calculations in ball-raceway contacts for applications in four contact point slewing bearings. In: 14th World Congress in Mechanism and Machine Science, Taipei, Taiwan, 25–30 Oct 2015
Aithal, S., Siva Prasad, N., Shunmugam, M.S., Chellapandi, P.: Effect of manufacturing errors on load distribution in large diameter slewing bearings of fast breeder reactor rotatable plugs. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp. 1–12 (2015)
Daidié, A., Chaib, Z., Ghosn, A.: 3D simplified finite elements analysis of load and contact angle in a slewing ball bearing. J. Mech. Des. 082601–1–8 (2008)
Joshi, A., Kachhia, B., Kikkari, H., Sridhar, M., Nelias, D.: Running torque of slow speed two-point and four-point contact bearings. Lubricants 3(2), 181–196 (2015)
Kang, S.H., Tesar, D.: An analytical comparison between ball and crossed roller bearings for utilization in actuator modules for precision modular robots. In: ASME 2003 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, pp. 1221–1230, 2–6 Sept 2003
Leblanc, A., Nelias, D.: Ball motion and sliding friction in a four-contact-point ball bearing. J. Tribol. 129(4), 801–808 (2007)
Leblanc, A., Nelias, D.: Analysis of ball bearings with 2, 3 or 4 contact points. Tribol. Trans. 51(3), 372–380 (2008)
Acknowledgments
The authors wish to acknowledge the financial support of the Ministry of Economy and Competitiveness through project number DPI2013-41091-R, and also the support of the University of the Basque Country through project number UFI 11/29.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Heras, I., Aguirrebeitia, J., Abasolo, M. (2017). Calculation of the Ball Raceway Interferences Due to Manufacturing Errors and Their Influence on the Friction Moment in Four-Contact-Point Slewing Bearings. In: Wenger, P., Flores, P. (eds) New Trends in Mechanism and Machine Science. Mechanisms and Machine Science, vol 43. Springer, Cham. https://doi.org/10.1007/978-3-319-44156-6_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-44156-6_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-44155-9
Online ISBN: 978-3-319-44156-6
eBook Packages: EngineeringEngineering (R0)