Abstract
Automation has increased more and more in manufacturing companies over the last decades. However, manual labor is still used in a variety of complex tasks and is currently irreplaceable, especially in assembly operations. Assisting and supporting the human worker during potentially complex assembly tasks is very relevant. Clear and easy-to-read assembly instructions, error-proofing methods, and an intuitive user interface for the worker have the potential to not only reduce the cognitive workload of the operator but also increase the productivity, improve the quality, reduce defects, and consequently reduce costs. Industry 4.0 technologies, in particular Augmented Reality and motion recognition sensors, can help companies in reaching these goals. However, there are currently only a few works that show how to implement these technologies with real case studies, especially with the Projected Augmented Reality (PAR). This is the reason why, in this paper an example of prototype of a smart workstation equipped with a Kinect-projector assistance system for manual assembly is presented.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Battaïa, O., Otto, A., Sgarbossa, F., Pesch, E.: Future trends in management and operation of assembly systems: from customized assembly systems to cyber-physical systems. Omega (U. K.) 78, 1–4 (2018)
Hu, S.J., Ko, J., Weyand, L., Elmaraghy, H.A., Lien, T.K., Koren, Y., et al.: Assembly system design and operations for product variety. CIRP Ann. – Manuf. Technol. 60(2), 715–733 (2011)
Zhong, Y.-G., Ai, B.: A modified ant colony optimization algorithm for multi-objective assembly line balancing. Soft Comput. 21(22), 6881–6894 (2017)
Akpinar, S., Elmi, A., Bektaş, T.: Combinatorial Benders cuts for assembly line balancing problems with setups. Eur. J. Oper. Res. 259(2), 527–537 (2017)
Michalos, G., Makris, S., Spiliotopoulos, J., Misios, I., Tsarouchi, P., Chryssolouris, G.: ROBO-PARTNER: seamless human-robot cooperation for intelligent, flexible and safe operations in the assembly factories of the future. Procedia CIRP [Internet] 23(C), 71–76 (2014). http://dx.doi.org/10.1016/j.procir.2014.10.079
Battini, D., Calzavara, M., Otto, A., Sgarbossa, F.: Preventing ergonomic risks with integrated planning on assembly line balancing and parts feeding. Int. J. Prod. Res. [Internet] 55(24), 7452–7472. (2017). https://doi.org/10.1080/00207543.2017.1363427
Joundi, J., Conradie, P., van Den Bergh, J., Saldien, J.: Understanding and exploring operator needs in mixed model assembly. CEUR Workshop Proc. 2503, 130–138 (2019)
Ong, S.K., Yuan, M.L., Nee, A.Y.C.: Augmented reality applications in manufacturing: a survey. Int. J. Prod. Res. 46(10), 2707–2742 (2008)
Hou, L., Wang, X., Bernold, L., Love, P.E.D.: Using animated augmented reality to cognitively guide assembly. J. Comput. Civ. Eng. 27(5), 439–451 (2013)
Watson, G., Curran, R., Butterfield, J., Craig, C.: The effect of using animated work instructions over text and static graphics when performing a small scale engineering assembly. In: Collaborative Product and Service Life Cycle Management for a Sustainable World – Proceedings of the 15th ISPE International Conferences Concurr Engineering CE 2008, vol. 44, no. 0, pp. 541–550 (2008)
Van Krevelen, D.W.F., Poelman, R.: A survey of augmented reality technologies, applications and limitations. Int. J. Virtual Real. 9(2), 1–20 (2010)
Bagamaspad, A.M., Caingles, J.I., Koa, K.A., Simeon, J.L., Ruiz, C.: A mobile augmented reality-based assembly guidance application for LEGO. In: MCCSIS 2018 - Multi Conference on Computer Science and Information Systems. Proceedings of the International Conferences Interfaces Human Computer Interacting 2018, Game Entertainment Technology 2018 Computer Graph Visual Comparative 2018, pp. 237–244, July 2018
Servan, J., Mas, F., Menéndez, J.L., RÃos, J.: Assembly work instruction deployment using augmented reality. Key Eng. Mater. 502(February), 25–30 (2012)
Syberfeldt, A., Danielsson, O., Holm, M., Wang, L.: Visual assembling guidance using augmented reality. Procedia Manuf. [Internet] 1, 98–109 (2015). http://dx.doi.org/10.1016/j.promfg.2015.09.068
Värno, K., Mahmood, K., Otto, T., Kuts, V.: Development of a smart workstation by using ar technology. Ann. DAAAM Proc. Int. DAAAM Symp. 30(1), 1061–1067 (2019)
Konig, M., Stadlmaier, M., Rusch, T., Sochor, R., Merkel, L., Braunreuther, S., et al.: MA2RA - manual assembly augmented reality assistant. In: IEEE International Conference on Industrial Engineering and Engineering Management, pp. 501–505 (2019)
Hou, L., Wang, X., Truijens, M.: Using augmented reality to facilitate piping assembly: an experiment-based evaluation. J. Comput. Civ. Eng. 29(1), 1–12 (2015)
Wang, X., Ong, S.K., Nee, A.Y.C.: Multi-modal augmented-reality assembly guidance based on bare-hand interface. Adv. Eng. Inform. [Internet] 30(3), 406–421 (2016). http://dx.doi.org/10.1016/j.aei.2016.05.004
Mourtzis, D., Zogopoulos, V., Xanthi, F.: Augmented reality application to support the assembly of highly customized products and to adapt to production re-scheduling. Int. J. Adv. Manuf. Technol. 105(9), 3899–3910 (2019)
Radkowski, R., Herrema, J., Oliver, J.: Augmented reality-based manual assembly support with visual features for different degrees of difficulty. Int. J. Hum. Comput. Interact. [Internet] 31(5), 337–349 (2015). http://dx.doi.org/10.1080/10447318.2014.994194
Lai, Z.H., Tao, W., Leu, M.C., Yin, Z.: Smart augmented reality instructional system for mechanical assembly towards worker-centered intelligent manufacturing. J. Manuf. Syst. [Internet] 55(July 2019), 69–81 (2020). https://doi.org/10.1016/j.jmsy.2020.02.010
Alves, J., Marques, B., Oliveira, M., Araújo, T., Dias, P., Santos, B.S.: Comparing spatial and mobile augmented reality for guiding assembling procedures with task validation. In: 19th IEEE International Conference on Autonomous Robot Systems and Competitions ICARSC 2019 (2019)
Vanneste, P., Huang, Y., Park, J.Y., Cornillie, F., Decloedt, B., Van den Noortgate, W.: Cognitive support for assembly operations by means of augmented reality: an exploratory study. Int. J. Hum. Comput. Stud. [Internet] 143(October 2019), 102480 (2020). https://doi.org/10.1016/j.ijhcs.2020.102480
Büttner, S., Sand, O., Röcker, C.: Extending the design space in industrial manufacturing through mobile projection. In: Mobile HCI 2015 - Proceedings of the 17th International Conference on Human-Computer Interaction with Mobile Devices and Services Adjunct, pp. 1130–1133 (2015)
Korn, O., Schmidt, A., Hörz, T.: Augmented manufacturing: a study with impaired persons on assistive systems using in-situ projection. In: ACM International Conference Proceeding Ser (2013)
Funk, M., Bächler, A., Bächler, L., Korn, O., Krieger, C., Heidenreich, T., et al.: Comparing projected in-situ feedback at the manual assembly workplace with impaired workers. In: Proceedings of the 8th ACM International Conference on PErvasive Technologies Related to Assistive Environments PETRA (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Simonetto, M., Peron, M., Fragapane, G., Sgarbossa, F. (2021). Digital Assembly Assistance System in Industry 4.0 Era: A Case Study with Projected Augmented Reality. In: Wang, Y., Martinsen, K., Yu, T., Wang, K. (eds) Advanced Manufacturing and Automation X. IWAMA 2020. Lecture Notes in Electrical Engineering, vol 737. Springer, Singapore. https://doi.org/10.1007/978-981-33-6318-2_80
Download citation
DOI: https://doi.org/10.1007/978-981-33-6318-2_80
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-6317-5
Online ISBN: 978-981-33-6318-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)