Abstract
We wish to develop robot systems that are increasingly more elastic, as a step towards bridging the gap between man-made machines and their biological counterparts. To this end, we develop soft actuators fabricated from elastomer films with embedded fluidic channels. These actuators offer safety and adaptability and may potentially be utilized in robotics, wearable tactile interfaces, and active orthoses or prostheses. The expansion of fluidic channels under pressure creates a bending moment on the actuators and their displacement response follows theoretical predictions. Fluidic actuators require a pressure source, which limits their mobility and mainstream usage. This paper considers instances of mechanisms made from distributed elastomer actuators to generate motion using a chemical means of pressure generation. A mechanical feedback loop controls the chemical decomposition of hydrogen peroxide into oxygen gas in a closed container to self-regulate the actuation pressure. This on-demand pressure generator, called the pneumatic battery, bypasses the need for electrical energy by the direct conversion of chemical to mechanical energy. The portable pump can be operated in any orientation and is used to supply pressure to an elastomeric rolling mobile robot as a representative for a family of soft robots.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
A. Albu-Schaffer, O. Eiberger, M. Grebenstein, S. Haddadin, C. Ott, T. Wimbock, S. Wolf, G. Hirzinger, Soft robotics. IEEE Robot. Autom. Mag. 15, 20–30 (2008)
Y. Bar-Cohen, Electroactive Polymer EAP Actuators as Artificial Muscles: Reality, Potential and Challenges, 2nd edn. (SPIE Press, 2004)
R.C. Chiechi, E.A. Weiss, M.D. Dickey, G.M. Whitesides, Eutectic gallium-indium (egain): a moldable liquid metal for electrical characterization of self-assembled monolayers. Angew. Chem. 47, 142–144 (2008)
N. Correll, C.D. Onal, H. Liang, E. Schoenfeld, D. Rus, Soft autonomous materials using active elasticity and embedded distributed computation, in 12th Internatoinal Symposium on Experimental Robotics (New Delhi, India, 2010)
Y. Fu, E.C. Harvey, M.K. Ghantasala, G.M. Spinks, Design, fabrication and testing of piezo electric polymer pvdf microactuators. Smart Mater. Struct. 15(1), S141 (2006)
M. Goldfarb, E.J. Barth, M.A. Gogola, J.A. Wehrmeyer, Design and energetic characterization of a liquid-propellant-powered actuator for self-powered robots. IEEE/ASME Trans. Mechatron. 8(2), 254–262 (2003)
H. Kazerooni, Design and analysis of pneumatic force generators for mobile robotic systems. IEEE/ASME Trans. Mechatron. 10(4), 411–418 (2005)
C. Keplinger, M. Kaltenbrunner, N. Arnold, S. Bauer, Rntgens electrode-free elastomer actuators without electromechanical pull-in instability. PNAS 107(10), 4505–4510 (2010)
A. Marchese, C.D. Onal, D. Rus, Soft robot actuators using energy-efficient valves controlled by electropermanent magnets, in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (2011) (to appear)
B. Mosadegh, C.H. Kuo, Y.C. Tung, Y.S. Torisawa, T. Bersano-Begey, H. Tavana, S. Takayama, Integrated elastomeric components for autonomous regulation of sequential and oscillatory flow switching in microfluidic devices. Nat. Phys. 6(6), 433–437 (2010)
K.W. Oh, C.H. Ahn, A review of microvalves. J. Micromech. Microeng. 16(5), R13 (2006)
R. Pelrine, R. Kornbluh, Q. Pei, J. Joseph, High-speed electrically actuated elastomers with strain greater than 100 %. Science 287(5454), 836–839 (2000)
L. Qin, O. Vermesh, Q. Shi, J.R. Heath, Self-powered microfluidic chips for multiplexed protein assays from whole blood. Lab Chip 9, 2016–2020 (2009)
A.W. Richards, G.M. Odegard, Constitutive modeling of electrostrictive polymers using a hyperelasticity-based approach. J. Appl. Mech. 77(1), 014502 (2010)
I.A. Salem, M. El-Maazawi, A.B. Zaki, Kinetics and mechanisms of decomposition reaction of hydrogen peroxide in presence of metal complexes. Int. J. Chem. Kinet. 32(11), 643–666 (2000)
T. Thorsen, S.J. Maerkl, S.R. Quake, Microfluidic large-scale integration. Science 298(5593), 580–584 (2002)
D. Trivedi, C. Rahn, W. Kier, I. Walker, Soft robotics: biological inspiration, state of the art, and future research. Adv. Bionics Biomech. 5(2), 99–117 (2008)
F. Vitale, D. Accoto, L. Turchetti, S. Indini, M.C. Annesini, E. Guglielmelli, Low temperature h2o2-powered actuators for biorobotics: thermodynamic and kinetic analysis, in Proceedings IEEE International. Conference on Robotics and Automation (2010), pp. 2197–2202
K. Wait, P. Jackson, L. Smoot, Self locomotion of a spherical rolling robot using a novel deformable pneumatic method, in 2010 IEEE International Conference on Robotics and Automation (ICRA) (2010), pp. 3757–3762
Y. Wang, R.M. Hernandez, D.J. Bartlett, J.M. Bingham, T.R. Kline, A. Sen, T.E. Mallouk, Bipolar electrochemical mechanism for the propulsion of catalytic nanomotors in hydrogen peroxide solutions. Langmuir 22, 10,451–10,456 (2006)
J.C. Whitehead, Hydrogen peroxide propulsion for smaller satellites, in Proceedings of AIAA/USU Conference on Small Satellites (1998)
Acknowledgements
This work was done in the Distributed Robotics Laboratory at MIT with partial support from the DARPA DSO “Chembots” project (W911NF-08-C-0060). We are grateful to DARPA and to our collaborators.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Onal, C.D., Chen, X., Whitesides, G.M., Rus, D. (2017). Soft Mobile Robots with On-Board Chemical Pressure Generation. In: Christensen, H., Khatib, O. (eds) Robotics Research . Springer Tracts in Advanced Robotics, vol 100. Springer, Cham. https://doi.org/10.1007/978-3-319-29363-9_30
Download citation
DOI: https://doi.org/10.1007/978-3-319-29363-9_30
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-29362-2
Online ISBN: 978-3-319-29363-9
eBook Packages: EngineeringEngineering (R0)