Abstract
The present work is a pioneering study on the contact mechanics including Pasternak foundation model. The context of this research is frictionless plane contact problem between a rigid punch and a functionally graded orthotropic layer lying on a Pasternak foundation in the limits of the linear elasticity theory. The layer is pressed by rigid cylindrical or flat punches that apply a concentrated force in the normal direction. The orthotropic material parameters are assumed to vary exponentially in the in-depth direction. Applying the Fourier integral transform technique and the boundary conditions of the problem, a singular integral equation is obtained, in which the contact stress and the contact width are unknowns. Using the Gauss–Chebyshev integration formula the singular integral equation is solved numerically. Effects of the Pasternak foundation parameters, material inhomogeneity, external load, punch radius or punch length on the contact stress, the contact width, the vertical displacements on the top and bottom surfaces of the layer, the subsurface and in-plane stresses are given.
Similar content being viewed by others
References
Choi, H.J.: On the plane contact problem of a functionally graded elastic layer loaded by a frictional sliding flat punch. J. Mech. Sci. Technol. 23(10), 2703–2713 (2009)
Çömez, İ: Frictional moving contact problem for a layer indented by a rigid cylindrical punch. Arch. Appl. Mech. 87(12), 1993–2002 (2017)
Chen, P., Chen, S., Peng, Z.: Thermo-contact mechanics of a rigid cylindrical punch sliding on a finite graded layer. Acta Mech. 223(12), 2647–2665 (2012)
Chen, P., Chen, S.: Thermo-mechanical contact behavior of a finite graded layer under a sliding punch with heat generation. Int. J. Solids Struct. 50(7–8), 1108–1119 (2013)
Zhou, Y.T., Lee, K.Y.: Thermo-electro-mechanical contact behavior of a finite piezoelectric layer under a sliding punch with frictional heat generation. J. Mech. Phys. Solids 59(5), 1037–1061 (2011)
Wang, B.L., Han, J.C.: A circular indenter on a piezoelectric layer. Arch. Appl. Mech. 76(7), 367–379 (2006)
Patra, R., Barik, S.P., Chaudhuri, P.K.: Frictionless contact of a rigid punch indenting an elastic layer having piezoelectric properties. Acta Mech. 228(2), 367–384 (2017)
Ma, J., El-Borgi, S., Ke, L.L., Wang, Y.S.: Frictional contact problem between a functionally graded magnetoelectroelastic layer and a rigid conducting flat punch with frictional heat generation. J. Therm. Stresses 39(3), 245–277 (2016)
Çömez, İ, Güler, M.A., El-Borgi, S.: Continuous and discontinuous contact problems of a homogeneous piezoelectric layer pressed by a conducting rigid flat punch. Acta Mech. 231(3), 957–976 (2020)
Çömez, İ: Frictional contact problem for a rigid cylindrical stamp and an elastic layer resting on a half plane. Int. J. Solids Struct. 47(7–8), 1090–1097 (2010)
Rhimi, M., El-Borgi, S., Lajnef, N.: A double receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate. Mech. Mater. 43(12), 787–798 (2011)
Karabulut, P.M., Adiyaman, G., Birinci, A.: A receding contact problem of a layer resting on a half plane. Struct. Eng. Mech. Int. J. 64(4), 505–513 (2017)
Yan J, Mi C: Double contact analysis of multilayered elastic structures involving functionally graded materials. Arch Mech. 2017;69(3)
Choi, H.J., Paulino, G.H.: Thermoelastic contact mechanics for a flat punch sliding over a graded coating/substrate system with frictional heat generation. J. Mech. Phys. Solids 56(4), 1673–1692 (2008)
Liu, J., Ke, L.L., Wang, Y.S.: Two-dimensional thermoelastic contact problem of functionally graded materials involving frictional heating. Int. J. Solids Struct. 48(18), 2536–2548 (2011)
Balci, M.N., Dag, S., Yildirim, B.: Subsurface stresses in graded coatings subjected to frictional contact with heat generation. J. Therm. Stress. 40(4), 517–534 (2017)
Nili, A., Adibnazari, S., Karimzadeh, A.: Stress field in the thermoelastic rolling contact of graded coatings. Arch. Appl. Mech. 88(10), 1805–1814 (2018)
Wang, T., Ma, X., Wang, L., Gu, L., Yin, L., Zhang, J., et al.: Three-dimensional thermoelastic contact model of coated solids with frictional heat partition considered. Coatings 8(12), 470 (2018)
Guler, M.A.: Closed-form solution of the two-dimensional sliding frictional contact problem for an orthotropic medium. Int. J. Mech. Sci. 87, 72–88 (2014)
Erbaş, B., Yusufoğlu, E., Kaplunov, J.: A plane contact problem for an elastic orthotropic strip. J. Eng. Math. 70(4), 399–409 (2011)
Comez, I., Yilmaz, K.B., Güler, M.A., Yildirim, B.: On the plane frictional contact problem of a homogeneous orthotropic layer loaded by a rigid cylindrical stamp. Arch. Appl. Mech. 89, 1–17 (2019)
Alinia, Y., Hosseini-nasab, M., Güler, M.A.: The sliding contact problem for an orthotropic coating bonded to an isotropic substrate. Eur. J. Mech. A/Solids 70, 156–171 (2018)
Yilmaz, K.B., Çömez, İ, Güler, M.A., Yildirim, B.: Analytical and finite element solution of the sliding frictional contact problem for a homogeneous orthotropic coating-isotropic substrate system. ZAMM J. Appl. Math. Mech. 99(3), e201800117 (2019)
Çömez, İ: Frictional moving contact problem of an orthotropic layer indented by a rigid cylindrical punch. Mech. Mater. 133, 120–127 (2019)
Güler, M.A., Kucuksucu, A., Yilmaz, K.B., Yildirim, B.: On the analytical and finite element solution of plane contact problem of a rigid cylindrical punch sliding over a functionally graded orthotropic medium. Int. J. Mech. Sci. 120, 12–29 (2017)
Yılmaz KB, Çömez İ, Güler MA, Yıldırım B: Frictional contact problem between a functionally graded orthotropic layer and a rigid flat punch. In: International Civil Engineering and Architecture Conference, Trabzon; 2019
Arslan, O., Dag, S.: Contact mechanics problem between an orthotropic graded coating and a rigid punch of an arbitrary profile. Int. J. Mech. Sci. 135, 541–554 (2018)
Dutta, S.C., Roy, R.: A critical review on idealization and modeling for interaction among soil–foundation–structure system. Comput. Struct. 80(20–21), 1579–1594 (2002)
Winkler E: Theory of elasticity and strength, H. Dominicus, Prague; 1867
Filonenko-Borodich, M.M.: Some approximate theories of the elastic foundations, Uchenyie Zapiski Moscovskogo Gosudarstuennogo Universiteta. Mechanika 46, 3–18 (1940). ((in Russian))
Pasternak PL: On a new method of analysis of an elastic foundation by means of two foundation constants, Gosudarstvennoe Izdatelstvo Literaturi po Stroitelstvu i Arkhitekture, Moscow (in Russian); (1954)
Kerr, A.D.: Elastic and viscoelastic foundation models. J. Appl. Mech. 31(3), 491–498 (1964)
Vlasov VZ, Leont’ev NN: Beams, plates and shells on elastic foundations, Israel Program for Scientific Translation, Jerusalem (translated from Russian); 1966
Nogami, T., Lam, Y.C.: Two-parameter layer model for analysis of slab on elastic foundation. J. Eng. Mech. 113(9), 1279–1291 (1987)
Özçelikörs, Y., Omurtag, M.H., Demir, H.: Analysis of orthotropic plate-foundation interaction by mixed finite element formulation using Gâteaux differential. Comput. Struct. 62(1), 93–106 (1997)
Doğruoğlu, A.N., Omurtag, M.H.: Stability analysis of composite-plate foundation interaction by mixed FEM. J. Eng. Mech. 126(9), 928–936 (2000)
Muravskii, B.G.: Mechanics of Non-homogeneous and Anisotropic Foundations. Springer, Berlin (2012)
Kutlu, A., Uğurlu, B., Omurtag, M.H.: A combined boundary-finite element procedure for dynamic analysis of plates with fluid and foundation interaction considering free surface effect. Ocean Eng. 145, 34–43 (2017)
Fazzolari, F.A.: Generalized exponential, polynomial and trigonometric theories for vibration and stability analysis of porous FG sandwich beams resting on elastic foundations. Compos. B Eng. 136, 254–271 (2018)
Songsuwan, W., Pimsarn, M., Wattanasakulpong, N.: Dynamic responses of functionally graded sandwich beams resting on elastic foundation under harmonic moving loads. Int. J. Struct. Stab. Dyn. 18(09), 1850112 (2018)
Esen, I.: Dynamic response of a functionally graded Timoshenko beam on two-parameter elastic foundations due to a variable velocity moving mass. Int. J. Mech. Sci. 153, 21–35 (2019)
Kaplunov, J., Prikazchikov, D., Sultanova, L.: Justification and refinement of Winkler-Fuss hypothesis. Z. Angew. Math. Phys. 69(3), 1–15 (2018)
Dempsey, J.P., Zhao, Z.G., Minnetyan, L., Li, H.: Plane contact of an elastic layer supported by a Winkler foundation. J. Appl. Mech. 57(4), 974–980 (1990)
Dempsey, J.P., Zhao, Z.G., Li, H.: Axisymmetric indentation of an elastic layer supported by a Winkler foundation. Int. J. Solids Struct. 27(1), 73–87 (1991)
Birinci, A., Erdol, R.: A frictionless contact problem for two elastic layers supported by a Winkler foundation. Struct. Eng. Mech. 15(3), 331–344 (2003)
Woźniak, M., Hummel, A., Pauk, V.J.: Axisymmetric contact problems for an elastic layer resting on a rigid base with a Winkler type excavitation. Int. J. Solids Struct. 39(15), 4117–4131 (2002)
Matysiak, S. J., Kulchytsky-Zhygailo, R., Perkowski DM: Stress distribution in an elastic layer resting on a Winkler foundation with an emptiness. Bull. Pol. Acad. Sci. Tech. Sci. 2018
Çömez, İ: Contact problem of a functionally graded layer resting on a Winkler foundation. Acta Mech. 224(11), 2833–2843 (2013)
Erdogan, F., Gupta, G.D.A., Cook, T.S.: Numerical solution of singular integral equations. In: Methods of Analysis and Solutions of Crack Problems, pp. 368–425. Springer, Dordrecht (1973)
Binienda, W.K., Pindera, M.J.: Frictionless contact of layered metal-matrix and polymer-matrix composite half planes. Compos. Sci. Technol. 50(1), 119–128 (1994)
El-Borgi, S., Çömez, I.: A receding frictional contact problem between a graded layer and a homogeneous substrate pressed by a rigid punch. Mech. Mater. 114, 201–214 (2017)
Kutlu, A., Omurtag, M.H.: Large deflection bending analysis of elliptic plates on orthotropic elastic foundation with mixed finite element method. Int. J. Mech. Sci. 65(1), 64–74 (2012)
Krenk, S.: On quadrature formulas for singular integral equations of the first and the second kind. Q. Appl. Math. 33(3), 225–232 (1975)
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Çömez, İ., Omurtag, M.H. Contact problem between a rigid punch and a functionally graded orthotropic layer resting on a Pasternak foundation. Arch Appl Mech 91, 3937–3958 (2021). https://doi.org/10.1007/s00419-021-01988-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-021-01988-0