- Router Table: Basic use and safetyBitraf, Oslo
Details
This course is for paying Bitraf members only. If you are not a paying member, sign up for membership at https://bitraf.no/# before the course.
A router table is a varsatile tool that allows you to perform a wide range of woodworking operations, such as: edge profiling, groove cutting, mortising, pattern routing, joinery, and slot cutting, with an increased precision control and safety.
But it's also one of the more dangerous machines in the workshop, The bit rotate are a very high speed, is exposed, and can grab the workpiece and pull the hand holding it into the moving bit if not operated properly. That's why treating it with the respect and care it requires is essenisial for a smooth operation.
Therefore, it is mandatory to complete a Router Table course at Bitraf before operating the machine.The course will be in English.
Important information:
• These courses tend to fill up. If you realize that you can't attend after signing up, please RSVP 'no' to sign off asap, so that someone else can take your spot.
• The course starts at 14:00 precisely in the wood workshop. You are welcome to come earlier to grab coffee etc before the course starts. Be sure to be on time, if you come late you will miss important information essential to complete the course, and not get certified to use the machines.
• Because of high expenses and running costs for the machines at Bitraf, you need to be a paying member of Bitraf to attend this course. Please join Bitraf at http://bitraf.no/join before signing up to the course.
• The course starts with a group theory presentation, then practical training. At the end of the course you will be added to the 'TOOLS' tool access system at this point, meaning you will have everything you need to start using the band saw.
Please join Bitraf Slack workspace and register for the bitraf google calendar before attending the course:
Click here to join Bitraf’s slack workspace
https://bitraf.no/slack-invite/
Click here for how to join Bitraf's google group
https://wiki.bitraf.no/wiki/Booking - Omvisning (guided tour)Bitraf, Oslo
Denne dagen er fin å komme på om man har lyst på en omvisning.
Vi tar en generell runde og viser frem hva man kan gjøre på Bitraf, blant annet: Laser kutter, 3D printer, CNC fres, lodding, elektronikk, verksted, coworking space, medlemsprosjekter og mye annet. Spørsmål underveis.Omvisningen starter:
18:00
Man kan finne mer informasjon om Bitraf på vår wiki: Bitraf wikiEnglish:
This day is dedicated to free tours of Bitraf, guaranteed to not stumble into a full event. We will walk through and look at all the machinery and activities one can do at bitraf. More info about what is at bitraf: Bitraf wiki
Tours begin at:
18:00 - PRUSA 3D printer courseBitraf, Oslo
This will be a short intro, where I'll show you the whole process from model to ready print. I'm also going to show you how the common problems occur, and how to fix them. I also should say this course is going to be in english, but i can answer any questions you ask in norwegian.
If you want to bring your laptop, here are important links:
Prusa slicer
Prusa i3 mk3s handbook
Website with free models for printingRequirements:
- Paid membership at Bitraf.
- You have to choose date and time you can actually show up to the course. The time is set differently each week.
There is no restrictions on who can use the printers. But this is where you can get all the info and pointers you need for using printers as a beginner.
- Broderimaskin kurs (embroidery machine course)Bitraf, Oslo
(English text below)
Bitraf har en datastyrt broderingsmaskin. For å bruke den, må man først ha gått kurs. Du må være medlem av bitraf for å kunne bruke maskinen. Medlemskap kan kjøpes på dagen om man ikke har dette fra før.En må ha med egen bærbar datamaskin med inkscape installert. Vi vil også installere inkstitch på kurset, dette er et tilleggsprogram vi bruker til å kontrollere maskinen. Vi kommer til å gjennomgå innholdet på Bitraf wiki's side om Broderimaskin på kurset.
Ta enten med avispapir, broderi vlieselin, vannløselig vlieselin, eller annet stivt papir som kan egne seg som underlag til broderingsflaten. Vi har stoff på bitraf dere kan øve på, men vi har ikke vlieselin.
Det blir ikke anledning til å brodere avanserte design på kurset, vi holder oss til enkle design slik at alle får prøvd. Inkstitch kan gi et tidsestimat på designet ditt, så vi holder oss til under 10 min per person i første omgang. Man kan heller sitte igjen og jobbe utover kvelden etter kurset, eller booke maskinen en annen dag via google kalenderen vår for å gjøre mere avanserte design.
Hvis du har meldt deg på, men plutselig ikke kan møte på arrangementet, husk å melde deg av på meetup slik at det blir ledig plass til andre :)
------------
Bitraf has a computerized embroidery machine. To use the machine, you must first have taken this course. You must also be a member of bitraf to use the machine. Membership can be purchased on the same day if you do not already have this.
You must bring your own laptop with inkscape installed. We will also install inkstitch on the course, this is an additional program we use to control the machine. We will review the content on the Bitraf wiki's page on the Embroidery Machine on the course.
Bring either a newspaper, embroidery vlieseline, water-soluble vlieseline, or other stiff paper that can be used as a substrate for the embroidery surface. We have textile at bitraf that you can practice on, but we don't have vlieseline.
It will not be possible to embroider advanced designs during the course due to time constraints, so we stick to simple designs so that everyone can try. Inkstitch can provide a time estimate for your design, so we'll stick to less than 10 minutes per person initially. If you want to do something more advanced, you can rather stay after the course and work into the evening. You can also book the machine for another day via our google calendar to do more advanced designs.
If you signed up, but suddenly cannot attend the event, remember to unsubscribe from the meetup so that there is space for others :)
- Omvisning (guided tour)Bitraf, Oslo
Denne dagen er fin å komme på om man har lyst på en omvisning.
Vi tar en generell runde og viser frem hva man kan gjøre på Bitraf, blant annet: Laser kutter, 3D printer, CNC fres, lodding, elektronikk, verksted, coworking space, medlemsprosjekter og mye annet. Spørsmål underveis.Omvisningen starter:
18:00
Man kan finne mer informasjon om Bitraf på vår wiki: Bitraf wikiEnglish:
This day is dedicated to free tours of Bitraf, guaranteed to not stumble into a full event. We will walk through and look at all the machinery and activities one can do at bitraf. More info about what is at bitraf: Bitraf wiki
Tours begin at:
18:00