Muğla Sıtkı Koçman Üniversitesi Eğitim Bilimleri Enstitüsü Sosyal Bilgiler Öğretmenliği Tezli Yüksek Lisans Mezunu Supervisors: Yrd. Doç. Dr. Muhammet AVAROĞULLARI Phone: 05055626138
... 1979), p. 444-447 Cukierman, Alex; Wachtel, Paul; Differantial Inflationary Expectations and... more ... 1979), p. 444-447 Cukierman, Alex; Wachtel, Paul; Differantial Inflationary Expectations and the Variability of the Rate of Inflation: Theory and ... Rochester Conference Series on Public Policy, 41 (1994), p. 157-219 doi:10.1016/0167-2231(94)00018-2 Kulish, Mariano, The New ...
ICCAD-99 TECHNICAL PROGRAM COMMITTEE Pranav Ashar C&C Research Labs., NEC USA Princeton, NJ ashar... more ICCAD-99 TECHNICAL PROGRAM COMMITTEE Pranav Ashar C&C Research Labs., NEC USA Princeton, NJ ashar@ccrl.nj.nec.com Reinaldo Bergamaschi IBM Corp. Yorktown Heights, NY rab@watson.ibm.com Shawn В Ian ton Carnegie Mellon Univ. Pittsburgh, PA blanton@mazda.ece.cmu.edu Ivo Bolsens IMEC Leuven, Belgium bolsens@imec.be J. Eric Bracken Ansoft Corp. Pittsburgh, PA bracken @ ansoft.com Francky Catthoor IMEC Leuven, Belgium catthoor® imec be Shih-Chieh Chang National Chung-Cheng Univ. Taiwan, ROC ...
http://trj.sagepub.com/ Textile Research Journal http://trj.sagepub.com/content/79/16/1459 The on... more http://trj.sagepub.com/ Textile Research Journal http://trj.sagepub.com/content/79/16/1459 The online version of this article can be found at: DOI: 10.1177/0040517508095606 2009 79: 1459 Textile Research Journal Emre Beskisiz, Nuray Ucar and Ali Demir Knitted Fabrics ...
Abstract The aim of this study is to design and develop a novel filament that can absorb water va... more Abstract The aim of this study is to design and develop a novel filament that can absorb water vapor but does not cause any feeling of wetness to the person who touches it. Thus, a polypropylene fiber which absorbs no water vapor (0%) may be used as an outer surface ...
In this study, the natural frequencies of annular plates with periodic radial through cracks are ... more In this study, the natural frequencies of annular plates with periodic radial through cracks are investigated by means of finite element method. The position of the crack in the plate surface was selected as parallel to radial direction. Both the cracks emanating from the inner and outer boundary of the plate is non-propagating and open. The crack in the element was modeled by an additional flexibility matrix, the terms of which were calculated using fracture mechanics. For this purpose, an isoparametric sector type element with radial through crack of four nodes and three degrees of freedom at each node is considered. In the event of the selection of appropriate half sector angle, taking into account the closeness of the geometries of the sector and trapezoidal type element, the flexibility matrix of the sector type element with crack are derived by means of the flexibility matrix of the trapezoidal type element. The natural frequencies of annular plates are found for different length and number of cracks. The theoretical results are obtained with different boundary conditions. The obtained results of improved elements are compared with experimental results in the literature. It is observed that the increment of the length and number of cracks has various effects on the natural frequencies and mode shapes of the annular plate.
Analysis and Simulation of Noise in Nonlinear Electronic Circuits and Systems, 1997
This chapter presents■ an overview of probability, random variables and stochastic processes,■ fi... more This chapter presents■ an overview of probability, random variables and stochastic processes,■ filtering of stochastic processes with linear time-invariant, linear time-varying and, in particular, linear periodically time-varying transformations,■ basic results from linear algebra about the eigenvalues and eigenvectors of a matrix and its transpose, positive definiteness, properties of a covariance matrix,■ Floquet theory of a system of linear periodically time-varying differential equations,■ overview of the theory of stochastic ...
Energy Sources Part a Recovery Utilization and Environmental Effects, Aug 4, 2010
ABSTRACT Municipal solid waste has been recently considered as one of the important renewable ene... more ABSTRACT Municipal solid waste has been recently considered as one of the important renewable energy resources. For municipal solid waste-based energy systems, municipal solid waste heating value is a critical variable. In this study, an artificial neural network model based on Levenberg-Marquardt backpropagation learning algorithm has been developed to predict higher heating value of municipal solid waste using their contents of water, carbon, hydrogen, nitrogen, oxygen, sulfur, and ash. Artificial neural network model has been able to predict the higher heating values of municipal solid waste with a tangent sigmoid transfer function at hidden layer with five neurons and a linear transfer function at output layer. Mean-squared error of prediction results in the validation process has been found to be 0.0137. The regression between network outputs and corresponding targets has been showed to be acceptable with a high correlation coefficient of 0.991. It can be deduced that the developed model is a robust estimation tool for higher heating value of municipal solid waste-based materials.
The Best of Iccad: 20 Years of Excellence in Computer-Aided Design, 2003
Part V PHYSICAL SIMULATION AND ANALYSIS Highlights in Physical Simulation and Analysis at ICCAD 3... more Part V PHYSICAL SIMULATION AND ANALYSIS Highlights in Physical Simulation and Analysis at ICCAD 367 Kenneth S. Kundert and Jacob White Nonlinear Circuit Simulation in the Frequency-Domain (ICCAD 1985) 383 Kenneth S. Kundert and Alberto Sangiovanni-Vincentelli Modeling the Driving-Point Characteristic of Resistive Interconnect for Accurate Delay Estimation (ICCAD 1989) 393 Peter R. O'Brien and Thomas L. Savarino Efficient Techniques for Inductance Extraction of Complex 3-D Geometries (ICCAD 1992) 403 M. Kamon, M. J, Tsuk, C. ...
... 1979), p. 444-447 Cukierman, Alex; Wachtel, Paul; Differantial Inflationary Expectations and... more ... 1979), p. 444-447 Cukierman, Alex; Wachtel, Paul; Differantial Inflationary Expectations and the Variability of the Rate of Inflation: Theory and ... Rochester Conference Series on Public Policy, 41 (1994), p. 157-219 doi:10.1016/0167-2231(94)00018-2 Kulish, Mariano, The New ...
ICCAD-99 TECHNICAL PROGRAM COMMITTEE Pranav Ashar C&C Research Labs., NEC USA Princeton, NJ ashar... more ICCAD-99 TECHNICAL PROGRAM COMMITTEE Pranav Ashar C&C Research Labs., NEC USA Princeton, NJ ashar@ccrl.nj.nec.com Reinaldo Bergamaschi IBM Corp. Yorktown Heights, NY rab@watson.ibm.com Shawn В Ian ton Carnegie Mellon Univ. Pittsburgh, PA blanton@mazda.ece.cmu.edu Ivo Bolsens IMEC Leuven, Belgium bolsens@imec.be J. Eric Bracken Ansoft Corp. Pittsburgh, PA bracken @ ansoft.com Francky Catthoor IMEC Leuven, Belgium catthoor® imec be Shih-Chieh Chang National Chung-Cheng Univ. Taiwan, ROC ...
http://trj.sagepub.com/ Textile Research Journal http://trj.sagepub.com/content/79/16/1459 The on... more http://trj.sagepub.com/ Textile Research Journal http://trj.sagepub.com/content/79/16/1459 The online version of this article can be found at: DOI: 10.1177/0040517508095606 2009 79: 1459 Textile Research Journal Emre Beskisiz, Nuray Ucar and Ali Demir Knitted Fabrics ...
Abstract The aim of this study is to design and develop a novel filament that can absorb water va... more Abstract The aim of this study is to design and develop a novel filament that can absorb water vapor but does not cause any feeling of wetness to the person who touches it. Thus, a polypropylene fiber which absorbs no water vapor (0%) may be used as an outer surface ...
In this study, the natural frequencies of annular plates with periodic radial through cracks are ... more In this study, the natural frequencies of annular plates with periodic radial through cracks are investigated by means of finite element method. The position of the crack in the plate surface was selected as parallel to radial direction. Both the cracks emanating from the inner and outer boundary of the plate is non-propagating and open. The crack in the element was modeled by an additional flexibility matrix, the terms of which were calculated using fracture mechanics. For this purpose, an isoparametric sector type element with radial through crack of four nodes and three degrees of freedom at each node is considered. In the event of the selection of appropriate half sector angle, taking into account the closeness of the geometries of the sector and trapezoidal type element, the flexibility matrix of the sector type element with crack are derived by means of the flexibility matrix of the trapezoidal type element. The natural frequencies of annular plates are found for different length and number of cracks. The theoretical results are obtained with different boundary conditions. The obtained results of improved elements are compared with experimental results in the literature. It is observed that the increment of the length and number of cracks has various effects on the natural frequencies and mode shapes of the annular plate.
Analysis and Simulation of Noise in Nonlinear Electronic Circuits and Systems, 1997
This chapter presents■ an overview of probability, random variables and stochastic processes,■ fi... more This chapter presents■ an overview of probability, random variables and stochastic processes,■ filtering of stochastic processes with linear time-invariant, linear time-varying and, in particular, linear periodically time-varying transformations,■ basic results from linear algebra about the eigenvalues and eigenvectors of a matrix and its transpose, positive definiteness, properties of a covariance matrix,■ Floquet theory of a system of linear periodically time-varying differential equations,■ overview of the theory of stochastic ...
Energy Sources Part a Recovery Utilization and Environmental Effects, Aug 4, 2010
ABSTRACT Municipal solid waste has been recently considered as one of the important renewable ene... more ABSTRACT Municipal solid waste has been recently considered as one of the important renewable energy resources. For municipal solid waste-based energy systems, municipal solid waste heating value is a critical variable. In this study, an artificial neural network model based on Levenberg-Marquardt backpropagation learning algorithm has been developed to predict higher heating value of municipal solid waste using their contents of water, carbon, hydrogen, nitrogen, oxygen, sulfur, and ash. Artificial neural network model has been able to predict the higher heating values of municipal solid waste with a tangent sigmoid transfer function at hidden layer with five neurons and a linear transfer function at output layer. Mean-squared error of prediction results in the validation process has been found to be 0.0137. The regression between network outputs and corresponding targets has been showed to be acceptable with a high correlation coefficient of 0.991. It can be deduced that the developed model is a robust estimation tool for higher heating value of municipal solid waste-based materials.
The Best of Iccad: 20 Years of Excellence in Computer-Aided Design, 2003
Part V PHYSICAL SIMULATION AND ANALYSIS Highlights in Physical Simulation and Analysis at ICCAD 3... more Part V PHYSICAL SIMULATION AND ANALYSIS Highlights in Physical Simulation and Analysis at ICCAD 367 Kenneth S. Kundert and Jacob White Nonlinear Circuit Simulation in the Frequency-Domain (ICCAD 1985) 383 Kenneth S. Kundert and Alberto Sangiovanni-Vincentelli Modeling the Driving-Point Characteristic of Resistive Interconnect for Accurate Delay Estimation (ICCAD 1989) 393 Peter R. O'Brien and Thomas L. Savarino Efficient Techniques for Inductance Extraction of Complex 3-D Geometries (ICCAD 1992) 403 M. Kamon, M. J, Tsuk, C. ...
Uploads
Thesis Chapters by Alper DEMİR
Papers by Alper DEMİR