Strain-driven and ultrasensitive resistive sensor/switch based on conductive alginate/nitrogen-doped carbon-nanotube-supported Ag hybrid aerogels with pyramid design

Flexible strain-driven sensor is an essential component in the flexible electronics. Especially, high durability and sensitivity to strain are required. Here, we present an efficient and low-cost fabrication strategy to construct a highly sensitive and flexible pressure sensor based on a conductive, elastic aerogel with pyramid design. When pressure is loaded, the contact area between the interfaces of the conductive aerogel and the copper electrode as well as among the building blocks of the nitrogen-doped carbon-nanotube-supported Ag (N-CNTs/Ag) aerogel monoliths, changes in reversible and directional manners. This contact resistance mechanism enables the hybrid aerogels to act as strain-driven sensors with high sensitivity and excellent on/off swithching behavior, and the gauge factor (GF) is ∼15 under strain of 3%, which is superior to those reported for other aerogels. In addition, robust, elastomeric and conductive nanocomposites can be fabricated by injecting polydimethylsiloxane (PDMS) into alginate/N-CNTs/Ag aerogels. Importantly, the building blocks forming the aerogels retain their initial contact and percolation after undergoing large-strain deformation, PDMS infiltration, and cross-linking of PDMS, suggesting their potential applications as strain sensors.