… a block and hole polyhedron is isostatic. This conjecture would imply that this class of frameworks
can be tested for being isostatic … to the general problem of frameworks in 3-space. For …

… for isostatic block and hole frameworks in that paper, we can swap the faces which were
blocks into holes and swap faces which were holes into blocks. This suggests that if a …

… spatial frameworks. How can we gencrate all isostatic (minimal statically rigid) frameworks
… How can we check that a proposed framework is isostatic? The first level of response to both …

… blocks and holes are swapped have a simple form. Examples illustrate the finer classification
of isostatic and near-isostatic block-and-hole … refer to isostatic block-and-hole frameworks, …

… preserved if we use any other isostatic framework for the discs which are blocks. From these
… If we remove one bar and make a quadrilateral hole, then the framework has a nontrivial …

… We know that a general triangle is isostatic. However any larger framework will not be …
We must add 6 bars in an appropriate manner to create a new isostatic framework (Figure …

… Mono-block, and pre-stressed wire-wound technology. Mono block design is used in
some of the isostatic pressing systems. The outer wall of this mono-block design is always in …

… A simple graph G = ( V , E ) is 3-rigid if its generic bar-joint frameworks in R 3 are … i ˆ as the
blocks or isostatic blocks of G ˆ . The following isostatic block substitution principle asserts that …

… For such analyses, application of an isostatic correction of some sort is more important than
the exact nature of the isostatic model or the values of its parameters; most isostatic residual …

… new plug having a &in diameter hole through the centre with a … vent valve the press was
converted for isostatic use. A further … is slid between the yoke framework until it reaches location …