EMC Standards

EMC Standards Test Equipment, Systems & Solutions

• 

  Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6

  SKU: sku-921

  Weight: 17 kg (37.5 Pounds)

  Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications

  Dimensions: 19"/3 HU

  Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz

  Impedance: 50 Ohms

  Input: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)

  Maximum Continuous Power: 80W (nominal)

  Standards Met: IEC 61000-4-6

  Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, Service

  Voltage Rating: 1 V to 30 Volts Max

  View Product Cart

• 

  3 Phase EFT/Burst, Surge Combination Wave Test System

  SKU: 1785

  Application/Test Type: CE Marking

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Pulse amplitude: 0.2 – 5.0 kV

  Pulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)

  Rentals Ship Today

  View Product Cart

• 

  CE Mark Product Package for IEC/EN 61000-4 Series Compliance

  SKU: TES-CE-Mark-RI-CI

  Applications: CE Marking, EMC Precompliance Testing, Conducted Immunity

  Harmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

  Industries: Medical Devices

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  Peak inrush current capability: greater than 500 Amps

  Pre-Programmed IEC Levels: Yes

  IN STOCK

  View Product Cart

• 

  3ctest EDS 16H Electrostatic Discharge Simulator up to 16 kV, IEC/EN 61000-4-2 Compliance

  SKU: sku-712

  Weight: Approx 7kg

  Air Discharge Voltage Range: 1000V – 16,000V （±5%）

  Battery: at least 16 hour battery life

  Contact Discharge Voltage Range: 1000V – 16,000V （±5%）

  Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

  Holding Time: More than 5 sec

  Polarity: positive & negative

  Pre-Programmed IEC Levels: Yes

  Resolution: 100V steps

  Standards Met: IEC/EN 61000-4-2, ISO 10605

  Typically In Stock

  View Product Cart

• 

  Narda PMM Rad-IS RF Radiated Immunity System for IEC/EN 61000-4-3

  SKU: sku-419

  Application/Test Type: Compliance verification as for Standard IEC/EN 61000-4-3

  Connector: BNC Input, Output Type N(f)

  Frequency Range: 9 kHz to 3 GHz

  Impedance: 50 Ohms

  Input: 115/230 V 50/60 Hz

  Standards Met: IEC 61000-4-3

  View Product Cart

• 

  EMC Partner MIG-OS-OS1 Oscillatory Wave Generator

  SKU: 5707

  MSRP:

  Was:

  Price Now:

  $19,500.00

  Inquire for Availability

• 

  EM Test TSS 500N4 Telecom Surge Generator as per ITU / FCC up to 4 kV

  SKU: sku-402

  Weight: approx. 20 kg (44 lbs.)

  AC Power Adapter: Supply voltage 115/230 V +10/-15%

  Dimensions: 19"/3HU

  Standards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.28 ITU-T K.45 (and more)

  Voltage Rating: 160 V - 4,000 V ±10%

  View Product Cart

• 

  Haefely ECOMPACT4 Precompliant EMC Impulse Generator

  SKU: sku-320

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC/EN 61000-4-4

  Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Test Setup Support: Conducted Immunity/Susceptibility Test Setup

  Max EUT Current (w/ Built in CDN): 16 Amps

  Max EUT Voltage (w/ Built in CDN): 60 Volts

  Peak inrush current capability: >500 Amps

  EFT/Burst Pulse Output Capability: 4.2 kV

  Combination/Wave Surge Output Capability: 4.2kV

  External Coupling: Data Lines (EFT & Surge), 3PH EUT

  Dips, Interrupts & Variations: 0%, 40%, 70%, 80%

  Typically In Stock

  View Product Cart

• 

  Teseq NSG 4070B Conducted & Radiated Immunity Test System

  SKU: sku-59

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): None

  BCI Test Levels (w/ built-in amplifier): None

  Frequency Range (w/ built-in amplifier): 4 kHz - 1 GHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  View Product Cart

• 

  IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

  SKU: 11195

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12

  Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  Max EUT Power: 600 Voltas @ 100 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Inquire for Availability

  View Product Cart

• 

  Rent CE Marking Conducted Immunity Transient Test System - Keytek EMCPro Plus w/ Keytek Minizap MZ-15

  SKU: sku-671

  Application/Test Type: CE Marking - Safety and EMC Directives

  Standards Met: IEC 61000-4-4, EN 61000-4-5, and more

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  In Stock

  View Product Cart

• 

  3ctest APS 60C30 Automotive Power Voltage Variation Simulator ISO 7637-2 Pulse 2B/4

  SKU: sku-733

  Input: External signal input: 0 ~ ±10v

  Output: Single polarity output: 0~60V

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Standards: ISO 7637 , FMC1278, ISO 16750-2 & More

  Typically In Stock

  View Product Cart