ABSTRACTParisite-(La) (IMA2016-031), ideally CaLa2(CO3)3F2, occurs in a hydrothermal vein crosscu... more ABSTRACTParisite-(La) (IMA2016-031), ideally CaLa2(CO3)3F2, occurs in a hydrothermal vein crosscutting a metarhyolite of the Rio dos Remédios Group, at the Mula mine, Tapera village, Novo Horizonte county, Bahia, Brazil, associated with hematite, rutile, almeidaite, fluocerite-(Ce), brockite, monazite-(La), rhabdophane-(La) and bastnäsite-(La). Parisite-(La) occurs as residual nuclei (up to 5 mm) in steep doubly-terminated pseudo-hexagonal pyramidal crystals (up to 8.2 cm). Parisite-(La) is transparent, yellow-green to white, with a white streak and displays a vitreous (when yellow-green) to dull (when white) lustre. Cleavage is distinct on pseudo-{001}; fracture is laminated, conchoidal, or uneven. The Mohs hardness is 4 to 5, and it is brittle. Calculated density is 4.273 g cm−3. Parisite-(La) is pseudo-uniaxial (+), ω = 1.670(2) and ε = 1.782(5) (589 nm). The empirical formula normalized on the basis of 11 (O + F) atoms per formula unit (apfu) is Ca0.98(La0.83Nd0.51Ce0.37Pr0.16Sm...
Http Dx Doi Org 10 1080 08827508 2010 530718, Dec 13, 2010
This paper presents a characterization study of ultra-fine solid particles contained in slimes of... more This paper presents a characterization study of ultra-fine solid particles contained in slimes of some iron mines from the Iron Quadrangle, Minas Gerais State, and from the Carajás region, Pará State, Brazil. This characterization is expected to provide a basis for the development and choice of mineral-processing techniques suitable for the tailings characteristics of each mine. Particle size separation was
Microesferas poliméricas à base de metacrilato de metila (MMA), divinilbenzeno (DVB) e material m... more Microesferas poliméricas à base de metacrilato de metila (MMA), divinilbenzeno (DVB) e material magnético foram preparadas via polimerização por suspensão. Foi estudada a influência da polimerização em suspensão ou semisuspensão, concentração de material magnético e concentração de divinilbenzeno sobre as características das microesferas obtidas. As partículas poliméricas foram caracterizadas por espectroscopia vibracional na região do infravermelho por transformada de Fourier (FT-IR), microscopia eletrônica de varredura, analisador de área específica e porosimetria, espalhamento de luz e magnetometria de amostra vibrante. O material magnético também foi caracterizado por FT-IR, além de difratometria de raios X e espectroscopia Mössbauer. Foram obtidas, com sucesso, microesferas poliméricas magnéticas à base de MMA e DVB (P(MMA-co-DVB)-M), contendo partículas magnéticas tanto na superfície quanto no interior da microesfera. As partículas obtidas através de polimerização em semisuspe...
Mulita é o único composto termodinamicamente estável no sistema binário Al2O3 - SiO2, na faixa 70... more Mulita é o único composto termodinamicamente estável no sistema binário Al2O3 - SiO2, na faixa 70,5 a 74,0% em peso de Al2O3. Mulita metaestável na faixa de 74 a 83,6% de Al2O3, entretanto, pode ser obtida. Devido às suas excelentes propriedades físicas e mecânicas a altas temperaturas, como alto ponto de fusão, baixa expansão térmica, boa resistência à fratura e ao choque térmico, alta resistência à fluência, estabilidade térmica, baixa densidade e baixa constante dielétrica, tem tido um uso cada vez maior em corpos cerâmicos. O mineral mulita, porém, é raro e quase inexistente na natureza. Para atender a um mercado crescente, mulitas sintéticas são produzidas, por meio de misturas de pós de Al2O3 e SiO2 em escala molecular, usando técnica sol-gel, ou por meio da calcinação de minerais que contenham sílica e alumina em suas estruturas, os chamados alumino-silicatos. Normalmente estes minerais contêm impurezas e, muitas vezes, produzem uma mulita acompanhada de uma fase vítrea. Nest...
ABSTRACTParisite-(La) (IMA2016-031), ideally CaLa2(CO3)3F2, occurs in a hydrothermal vein crosscu... more ABSTRACTParisite-(La) (IMA2016-031), ideally CaLa2(CO3)3F2, occurs in a hydrothermal vein crosscutting a metarhyolite of the Rio dos Remédios Group, at the Mula mine, Tapera village, Novo Horizonte county, Bahia, Brazil, associated with hematite, rutile, almeidaite, fluocerite-(Ce), brockite, monazite-(La), rhabdophane-(La) and bastnäsite-(La). Parisite-(La) occurs as residual nuclei (up to 5 mm) in steep doubly-terminated pseudo-hexagonal pyramidal crystals (up to 8.2 cm). Parisite-(La) is transparent, yellow-green to white, with a white streak and displays a vitreous (when yellow-green) to dull (when white) lustre. Cleavage is distinct on pseudo-{001}; fracture is laminated, conchoidal, or uneven. The Mohs hardness is 4 to 5, and it is brittle. Calculated density is 4.273 g cm−3. Parisite-(La) is pseudo-uniaxial (+), ω = 1.670(2) and ε = 1.782(5) (589 nm). The empirical formula normalized on the basis of 11 (O + F) atoms per formula unit (apfu) is Ca0.98(La0.83Nd0.51Ce0.37Pr0.16Sm...
Http Dx Doi Org 10 1080 08827508 2010 530718, Dec 13, 2010
This paper presents a characterization study of ultra-fine solid particles contained in slimes of... more This paper presents a characterization study of ultra-fine solid particles contained in slimes of some iron mines from the Iron Quadrangle, Minas Gerais State, and from the Carajás region, Pará State, Brazil. This characterization is expected to provide a basis for the development and choice of mineral-processing techniques suitable for the tailings characteristics of each mine. Particle size separation was
Microesferas poliméricas à base de metacrilato de metila (MMA), divinilbenzeno (DVB) e material m... more Microesferas poliméricas à base de metacrilato de metila (MMA), divinilbenzeno (DVB) e material magnético foram preparadas via polimerização por suspensão. Foi estudada a influência da polimerização em suspensão ou semisuspensão, concentração de material magnético e concentração de divinilbenzeno sobre as características das microesferas obtidas. As partículas poliméricas foram caracterizadas por espectroscopia vibracional na região do infravermelho por transformada de Fourier (FT-IR), microscopia eletrônica de varredura, analisador de área específica e porosimetria, espalhamento de luz e magnetometria de amostra vibrante. O material magnético também foi caracterizado por FT-IR, além de difratometria de raios X e espectroscopia Mössbauer. Foram obtidas, com sucesso, microesferas poliméricas magnéticas à base de MMA e DVB (P(MMA-co-DVB)-M), contendo partículas magnéticas tanto na superfície quanto no interior da microesfera. As partículas obtidas através de polimerização em semisuspe...
Mulita é o único composto termodinamicamente estável no sistema binário Al2O3 - SiO2, na faixa 70... more Mulita é o único composto termodinamicamente estável no sistema binário Al2O3 - SiO2, na faixa 70,5 a 74,0% em peso de Al2O3. Mulita metaestável na faixa de 74 a 83,6% de Al2O3, entretanto, pode ser obtida. Devido às suas excelentes propriedades físicas e mecânicas a altas temperaturas, como alto ponto de fusão, baixa expansão térmica, boa resistência à fratura e ao choque térmico, alta resistência à fluência, estabilidade térmica, baixa densidade e baixa constante dielétrica, tem tido um uso cada vez maior em corpos cerâmicos. O mineral mulita, porém, é raro e quase inexistente na natureza. Para atender a um mercado crescente, mulitas sintéticas são produzidas, por meio de misturas de pós de Al2O3 e SiO2 em escala molecular, usando técnica sol-gel, ou por meio da calcinação de minerais que contenham sílica e alumina em suas estruturas, os chamados alumino-silicatos. Normalmente estes minerais contêm impurezas e, muitas vezes, produzem uma mulita acompanhada de uma fase vítrea. Nest...
Uploads
Papers by Magela da Costa