Cited By
View all- Jiang ZWang XLiu JGu NLiu W(2024)Intelligent Reduced-Dimensional Scheme of Model Predictive Control for Aero-EnginesActuators10.3390/act1304014013:4(140)Online publication date: 10-Apr-2024
Computational Load Comparison of Multiplexed and Standard Model Predictive Control
Pages 17 - 22
Abstract
Multiplexed Model Predictive Control (MMPC) has been motivated as a strategy to reduce real-time computational load carried out by the controller in solving a finite-time constrained optimisation problem online. In this paper, we carried out experiments to compare the computational load of MMPC and standard MPC. The experiments were carried out on a multizone thermal processing equipment commonly used in semiconductor manufacturing. The results showed that MMPC has computational advantage over the standard MPC, for large horizon and when constraints are present.
References
[1]
K. V. Ling, J. M. Maciejowski, and B. F. Wu. Multiplexed Model Predictive Control. 16th IFAC World Congress, Prague, July 2005.
[2]
K. V. Ling, J. M. Maciejowski, and B. F. Wu. Multiplexed Model Predictive Control. Technical report, Cambridge university Engineering Dept. CUED/FINFENG/ TR.561, 2006.
[3]
A. G. Richards, K. V. Ling, and J. M. Maciejowski. Robust Multiplexed Model Predictive Control, pp.441--446, 2007.
[4]
G. S. May and C. J. Spanos. Fundamentals of Semiconductor Manufacturing and Process Control, John Wiley & Sons. Inc., 2006.
[5]
M. Quirk, and J. Serda. Semiconductor Manufacturing Technology, Prentice Hall, 2001.
[6]
K. Ruck, H. Weichert, S. Hornig, F. Finger, F. Fleischer, and D. Hetzer. Effect and procedures of post exposure bake temperature optimization on the CD uniformity in a mass production environment, in Proc. SPIE, 2007, vol. 6518, pp. 651850.
[7]
Q. Zhang, C. Tang, T. Hsieh, N. Maccrae, B. Singh, K. Poolla, and C. J. Spanos. Comprehensive CD uniformity control across lithography and etch, in Proc. SPIE, 2005, vol. 5752, pp. 692--701.
[8]
L. Berger, P. Dress, and T. Gairing. Global critical dimension uniformity improvement for mask fabrication with negative-tone chemically amplified resists by zone-controlled postexposure bake, J. Microlith. Microfab. Microsyst., vol. 3, no. 2, pp. 203--211, Apr. 2004.
[9]
L. L. Lee, D. Schaper, W. K. Ho. Real-Time Predictive Control of Photoresist Film Thickness Uniformity, IEEE Transactions on Semiconductor Manufaturing, Vol. 15(1), pp.51--59, 2002.
[10]
K. V. Ling, W. K. Ho, B. F. Wu, A. Lo, H. Yan. Multiplexed MPC for Multizone Thermal Processing in Semiconductor Manufacturing, IEEE Transactions on Control System Technology, to appear, 2010.
[11]
W. K. Ho, A. Tay, M. Chen, and C. M. Kiew, Optimal Feed-Forward Control for Multizone Baking in Microlithography, Ind. Eng. Chem. Res, 46, 3623--3628, 2007.
[12]
Z. Li and J. Sun, "Disturbance compensating model predictive control with application to ship heading control," IEEE Transactions on Control Systems Tech-nology, vol. 20, no. 1, pp. 257--265, 2012.
[13]
K. EI-Awady, C. Schapter and T. Kailath. Programmable thermal processing module for semiconductor substrates, IEEE Transcations on Control System Technology, Vol.12, pp.493--509, 2004.
[14]
Blanchini. Set invariance in control, Automatica, vol. 35(11), pp.1747--1767,1999.
Index Terms
- Computational Load Comparison of Multiplexed and Standard Model Predictive Control
Recommendations
The Design of Temperature Control System of Test Chamber Based on Predictive Control Algorithm
IMCCC '14: Proceedings of the 2014 Fourth International Conference on Instrumentation and Measurement, Computer, Communication and ControlIn many areas of scientific research and production practice, the temperature is an important physical quantity need to measure and control. It is closely related to almost all of the physical and chemical processes and has great influence on the ...
A Decoupling Control Method of Ceramic Roller Kiln Temperature Based on Thermal Balance
ICICIS '11: Proceedings of the 2011 International Conference on Internet Computing and Information ServicesAccording to the characteristics of ceramic roller kiln temperature process and the implementation scheme of temperature control, we proposed a new control method of the ceramic roller kiln temperature based on thermal balance. We set the difference ...
A study on PID control with indirect liquid/steam heating
The purpose of this experimental study is to reach homogeneous temperature control effect on the heat plate. In this research, the heat plate is kept constant temperature by the state of dual-phases, i.e., the state of phase change between liquid and ...
Comments
Information & Contributors
Information
Published In
February 2018
177 pages
ISBN:9781450363655
DOI:10.1145/3191477
Copyright © 2018 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
In-Cooperation
- Beijing Jiaotong University
- York University
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 07 February 2018
Check for updates
Author Tags
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
ICMRE 2018
ICMRE 2018: 2018 4th International Conference on Mechatronics and Robotics Engineering
February 7 - 11, 2018
Valenciennes, France
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- View Citations1Total Citations
- 45Total Downloads
- Downloads (Last 12 months)5
- Downloads (Last 6 weeks)2
Reflects downloads up to 24 Dec 2024
Other Metrics
Citations
Cited By
View all- Jiang ZWang XLiu JGu NLiu W(2024)Intelligent Reduced-Dimensional Scheme of Model Predictive Control for Aero-EnginesActuators10.3390/act1304014013:4(140)Online publication date: 10-Apr-2024
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in