Pengelolaan sampah Kota Cilegon meliputi pemilahan sampah, pengumpulan sampah, pengangkutan sampa... more Pengelolaan sampah Kota Cilegon meliputi pemilahan sampah, pengumpulan sampah, pengangkutan sampah dan pemrosesan akhir dengan metode lahan urug terkendali (controlled landfill). Latar belakang masalah penelitian ini yaitu pada tahun 2012 dihasilkan volume sampah sebanyak 365.214,00 m 3 . Dinas Kebersihan dan Pertamanan (DKP) Kota Cilegon pada tahun 2012 hanya mampu melakukan pengelolaan sampah sekitar 181.512,00 m 3 atau sekitar 49,7%. Dilain pihak, pemerintah daerah mentargetkan persentase pelayanan kebersihan di Kota Cilegon dapat meningkat menjadi 70% per tahun sehingga dapat dikatakan masih ada sekitar 50,3 % atau 183.702 m 3 yang tertinggal di sumber sampah di Kota Cilegon sehingga diperlukan adanya alternatif pengelolaan sampah yang dapat meningkatkan persentase pelayanan kebersihan di Kota Cilegon. Tujuan penelitian yang dilakukan adalah merancang model simulasi pengelolaan sampah Kota Cilegon dengan sistem dinamis untuk kemudian merancang beberapa alternatif pengelolaan sa...
Established since the 80s, PT. XYZ is an air compressor manufacturing industry located in Tangera... more Established since the 80s, PT. XYZ is an air compressor manufacturing industry located in Tangerang, Indonesia. In the production process, the Air compressor type L Unloading 1/4 HP has a very complex supply chain network which makes the supply chain network activities experience obstacles in the form of risks or potential risks that can occur so that it can disrupt the smooth running of the supply chain activities of the air compressor type L. Unloading 1/4 HP. However, PT. XYZ has not maximally implemented risk mitigation actions in its supply chain. The purpose of this study is to propose a mitigation action against risk events that occur along the supply chain of water compressor type L Unloading 1/4 HP using the FFMEA (Fuzzy Failure Mode and Effect Analysis) and FAHP (Fuzzy Analytical Hierarchy Process) methods. Based on the research, there were 29 identified risk events with 5 priority risk events. And of the 5 priority risk events, each has 2 proposed mitigation actions per p...
Jurnal Manajemen Informatika dan Sistem Informasi, 2021
Berdasarkan sumber informasi dari Badan Pusat Statistik (BPS), kita dapat mengetahui persentase k... more Berdasarkan sumber informasi dari Badan Pusat Statistik (BPS), kita dapat mengetahui persentase kemiskinan yang ada di seluruh provinsi Indonesia. Namun didalam data yang tersaji di BPS tersebut, kategori persentase kemiskinan yang disajikan hanya berdasarkan provinsi sedangkan dalam upaya untuk memberantas kemiskinan yang ada, pemerintah perlu mengetahui daerah manakah yang memiliki tingkat kemiskinan tinggi, sedang atau rendah sehingga pemerintah dapat menetapkan skala prioritas untuk menanggulangi kemiskinan tersebut. Oleh karena itu, perlu dilakukan pengelompokan provinsi yang ada di Indonesia berdasarkan tingkat kemiskinannya agar pemerintah dapat memberikan kebijakan atau pendekatan yang tepat dan cepat untuk mengatasi kemiskinan yang terjadi berdasarkan tingkat kemiskinan masing-masing provinsi. Pada penelitian ini digunakan metode clustering dengan algoritma K-Means untuk mengelompokan provinsi berdasarkan tingkat kemiskinannya dengan bantuan software Weka. Hasil penelitian ...
PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi... more PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi dalam yaitu divisi Wire Rod Mill (WRM) yang memproduksi wire rod (batang kawat). Selama ini divisi WRM mengukur kinerjanya dengan cara yang sederhana berdasarkan input dan output dalam satuan unit atau perseorangan dan tidak diukur biaya – biaya yang terkait dalam input dan output yang digunakan karena perusahaan belum memiliki metode yang sesuai untuk mengukur kinerjanya. Selain itu, belum ada penelitian yang mengukur efisiensi produksi di divisi WRM. Pada pengukuran efisiensi produksi divisi WRM ini menggunakan pertimbangan biaya produksi untuk memproduksi wire rod dengan metode Data Envelopment Analysis (DEA). Penelitian ini bertujuan untuk memperoleh nilai efisiensi teknis dan faktor yang mempengaruhi efisiensi DMU. Dengan menggunakan metode DEA, perusahaan dapat mengukur kinerja atau tingkat efisiensi produksi serta mengetahui faktor-faktor yang berpengaruh terhadap efisiensi prod...
PT. XYZ merupakan industri baja yang menghasilkan berbagai jenis produk baja salah satunya baja l... more PT. XYZ merupakan industri baja yang menghasilkan berbagai jenis produk baja salah satunya baja lembaran yang diproduksi oleh pabrik Slab Steel Plant yang terdiri atas 2 pabrik yaitu SSP1 dengan kapasitas 1juta ton/tahun dan SSP2 dengan kapasitas 800ribu ton/tahun. Objek penelitian ini difokuskan pada SSP1 karena memiliki kapasitas yang besar dan memiliki usia mesin yang lebih tua sehingga SSP1 sering mengalami downtime. Sistem produksi pada mesin yang digunakan adalah sistem yang memproduksi produk secara terus-menerus dalam volume besar, kerusakan pada salah satu komponen menyebabkan terhentinya keseluruhan fungsi sistem. Hal tersebut akan menyebabkan menurunnya kemampuan dari mesin yang dimiliki, maka perlu dilakukannya penjadwalan yang optimal untuk dapat mempertahankan performansi mesin. Tujuan penelitian yang dilakukan adalah menentukan komponen kritis pada mesin EAF5, menentukan nilai reliability komponen kritis mesin EAF5, mengidentifikasi terjadinya penyebab kegagalan pada ...
Pengendalian persediaan bahan baku merupakan hal yang sangat penting dalam proses produksi setiap... more Pengendalian persediaan bahan baku merupakan hal yang sangat penting dalam proses produksi setiap perusahaan manufaktur. Sebab bahan baku merupakan salah satu faktor yang menjamin kelancaran proses produksi. PT.XYZ merupakan perusahaan yang bergerak dibidang manufaktur yang kegiatan utamanya adalah memproduksi semen dengan menggunakan empat macam bahan baku yaitu klinker,pozzolan,limestone dan gypsum. Pada proses produksi yang terjadi di PT.XYZ masih terdapat permasalahan yang menghambat proses berjalannya produksi semen tersebut. Permasalahan yang terjadi yaitu proses produksi yang tidak didukung oleh ketersediaan bahan baku yang mencukupi sehingga mengakibatkan kontinuitas produksi terganggu yang dapat berakibat pada terhentinya proses produksi semen. Penelitian ini bertujuan untuk mengoptimalkan jumlah pemesanan bahan baku dengan menggunakan model inventori probabilistik Q backorder policy dengan kendala kapasitas gudang bahan baku sehingga persediaan akan bahan baku dapat terp...
PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi... more PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi dalam yaitu divisi Wire Rod Mill (WRM) yang memproduksi wire rod (batang kawat). Selama ini divisi WRM mengukur kinerjanya dengan cara yang sederhana berdasarkan input dan output dalam satuan unit atau perseorangan dan tidak diukur biaya – biaya yang terkait dalam input dan output yang digunakan karena perusahaan belum memiliki metode yang sesuai untuk mengukur kinerjanya. Selain itu, belum ada penelitian yang mengukur efisiensi produksi di divisi WRM. Pada pengukuran efisiensi produksi divisi WRM ini menggunakan pertimbangan biaya produksi untuk memproduksi wire rod dengan metode Data Envelopment Analysis (DEA). Penelitian ini bertujuan untuk memperoleh nilai efisiensi teknis dan faktor yang mempengaruhi efisiensi DMU. Dengan menggunakan metode DEA, perusahaan dapat mengukur kinerja atau tingkat efisiensi produksi serta mengetahui faktor-faktor yang berpengaruh terhadap efisiensi prod...
PT. XYZ adalah perusahaan yang beroperasi di bidang pelayanan pelabuhan laut khusus untuk bongkar... more PT. XYZ adalah perusahaan yang beroperasi di bidang pelayanan pelabuhan laut khusus untuk bongkar muat barang curah (bulk cargo). Proses bongkar muat di PT. XYZ belum sepenuhnya dapat dikatakan baik. Pada tahun 2013 waktu delay yang terjadi pada proses pembongkaran kargo pupuk adalah sekitar 89 jam dimana mengakibatkan terjadinya antrian kapal (congesty) dan perusahaan harus mengeluarkan biaya penalty. Salah satu cara untuk mengurangi waktu delay adalah dengan melakukan kegiatan-kegiatan pencegahan yang tentu saja akan mengeluarkan biaya yang disebut prevention cost. Penelitian ini bertujuan untuk menentukan nilai prevention cost paling minimal yang berdampak pada pengurangan waktu delay yang terjadi dengan menggunakan simulasi sistem dinamis. Metode penyelesaian masalah pada penelitian ini menggunakan simulasi sistem dinamis yang diawali dengan melakukan identifikasi masalah, konseptualisasi sistem dengan causal loop diagram (CLD), merancang stock flow diagram sebagai model simulas...
PT.XYZ merupakan salah satu perusahaan yang bergerak di bidang pembangkit listrik. Salah satu pro... more PT.XYZ merupakan salah satu perusahaan yang bergerak di bidang pembangkit listrik. Salah satu produk lain yang dihasilkan adalah timbulnya limbah padat, yaitu abu terbang (fly ash) dan abu dasar (bottom ash). Pada proses penyaluran fly ash dan bottom ash memiliki beberapa kendala diantaranya berupa transportasi yaitu conveyor yang digunakan dalam penyaluran abu yang tidak maksimal, adanya pluking (batubara yang menggumpal sehingga tidak berjalan lancar), maintenance yang tidak baik. Berdasarkan hal tersebut perlu dilakukan penelitian untuk mengetahui aktifitas apa yang terjadi pada proses fly ash dan bottom ash yang menyebabkan pemborosan terbesar. Metode yang digunakan untuk mengatasi pemborosan, digunakan pendekatan lean manufacturing dengan menitik beratkan pada 7 macam pemborosan yaitu overproduction, waiting, transportation, inappropriate process, unnecessary inventori, unnecessary motion, dan defect. Setelah dilakukan identifikasi terhadap seven waste, kemudian melakukan pemet...
Batik is one of the cultural assets that must be preserved because it plays an important role in ... more Batik is one of the cultural assets that must be preserved because it plays an important role in the local economy. At PT. Batik Banten there are risks in every activity of the supply chain, so should receive appropriate treatment due to the risks that arise can make the supply chain activities are not going well. PT. Batik Banten supply chain activity consists of the purchase of raw materials, the production process, the distribution process, and the sales process. The purpose of this study are to identify the risks that arise in the supply chain of Batik Banten products, to determine the critical risks in the supply chain of Batik Banten products and to propose risk management strategies at critical risk factors. The method for solving the problem in this research is integration of AHP (Analytical Hierarchy Process) and FMECA (Failure Mode, Effects and Criticality Analysis) to determine the value of the RPN (Risk Priority Number) based on the weight value/WRPN (Weighted Risk Prior...
Penerapan supply chain pada bongkar muat produk slab steel dan iron ore di PT.XYZ masih banyak... more Penerapan supply chain pada bongkar muat produk slab steel dan iron ore di PT.XYZ masih banyak ditemukan pemborosan, sehinggasehingga leadtime menjadi panjang. Lean supply chain adalah metode yang dapat dilakukan untuk mengindentifikasi adanya pemborosan dan menemukan penyebab–penyebab terjadinya pemborosan sepanjang aliran supply chain biji besi (iron ore) dan slab steel.maka digunakan pendekatan Define, Measure,Analyze, Improve Control (DMAIC) dan Value Stream Analysis Tools (VALSAT) sebagai langkah terstruktur untuk mengeliminasi segala bentuk pemborosan.usulan perbaikan. Pada aktivitas Slab Steel rencana perbaikan untuk menghilangkan waste agar dapat memperpendek lead time dengan menghilangkan aktivitas non value added, seperti aktivitas delay yaitu menunggu loading, dan juga menghilangkan aktivitas storage di PT.XYZ,selain itu memberikan training kepada seluruh supir untuk mematuhi standar operasional prosedur sehingga pengiriman ke stockpile PT.ABC dengan waktu 65 meni...
IKM Banten Art adalah IKM yang bergerak dalam industri kreatif dalam bidang kerajinan di kota Ser... more IKM Banten Art adalah IKM yang bergerak dalam industri kreatif dalam bidang kerajinan di kota Serang. IKM ini memproduksi berbagai jenis kerajinan handycraft gypsum berupa miniatur bangunan, hewan atau ciri khas Kota Serang. Latar belakang penelitian ini yang juga menjadi hambatan bagi IKM Banten Art adalah kurangnya sarana promosi, sehingga mempersulit pengenalan produk kerajinan ke masyarakat. Sarana promosi yang dilakukan IKM “Banten Art” saat ini hanya melalui media konvensional seperti brosur, pamflet dan lainnya. Salah satu sarana promosi yang efektif adalah melalui media internet. Tujuan penelitian ini adalah membuat suatu perancangan sistem pemasaran e-commerce berbasis website agar IKM “Banten Art” dapat menata manajemen pemasaran secara efektif yang dapat mendukung pengenalan produk industri kreatif kota Serang kepada masyarakat di seluruh Nusantara maupun luar negeri. Dengan dibuatnya sistem pemasaran e-commerce berbasis website ini maka diharapkan omzet penjualan dapat ...
Puskesmas merupakan fasilitas kesehatan yang terjangkau bagi seluruh kalangan masyarakat, khususn... more Puskesmas merupakan fasilitas kesehatan yang terjangkau bagi seluruh kalangan masyarakat, khususnya masyarakat menengah kebawah. Salah satu Puskesmas yang ada di Cilegon adalah Puskesmas Jombang. Pada Puskesmas ini ditemukan waktu pelayanan yang lama yang disebabkan oleh aktivitas-aktivitasyang tidak memberikan nilai tambah bagi pasien, sehingga waktu pelayanan lebih lama yaitu ±50 menit. Penelitian ini bertujuan untuk mengidentifikasi aktivitas-aktivitas VA, NVA, dan NNVA, merancang model simulasi menggunakan software Promodel, serta menentukan usulan perbaikan untuk mengurangi lead time pada pelayanan kesehatan di Puskesmas Jombang. Penelitian ini menggunakan metode lean healthcare dan simulasi dengan software Promodel. Hasil simulasi Promodel menunjukkan bahwa waktu rata-rata pelayanan di Puskesmas Jombang pada pasien umum dan pasien askes sebesar 3469,20 detik serta pasien JPS sebesar 3470,40 detik, sehingga dibuat beberapa rancangan perbaikan yang terdiri dari 3 skenario perb...
IOP Conference Series: Materials Science and Engineering, 2020
ABC plant is one of seven plants in XYZ industry which produce Cold Rolling Coil (CRC) and Cold R... more ABC plant is one of seven plants in XYZ industry which produce Cold Rolling Coil (CRC) and Cold Rolling Sheet (CRS). The problems faced by ABC plant in its supply chain network are the high overall costs of supply chain operations and the quantity of gas usage. The characteristics of this problem consist of more than one objective, the best method for solving this problem called multi-objective optimization. This research is aim to identify the decision variables that will be optimized and determine the optimal quantity of each decision variable using NSGA-II method. The parameters used in this research are the population size of 50, crossover probability with range 0.1-0.9, mutation probability 0.1 and 0.2 also the number of generation 50 and 100. The result shows that the selected parameters for this research are the crossover probability of 0.7, mutation probability of 0.1, number of generation 100. Four decision variables that are optimized, namely CRC produced (Lite, Medium, an...
Pengelolaan sampah Kota Cilegon meliputi pemilahan sampah, pengumpulan sampah, pengangkutan sampa... more Pengelolaan sampah Kota Cilegon meliputi pemilahan sampah, pengumpulan sampah, pengangkutan sampah dan pemrosesan akhir dengan metode lahan urug terkendali (controlled landfill). Latar belakang masalah penelitian ini yaitu pada tahun 2012 dihasilkan volume sampah sebanyak 365.214,00 m 3 . Dinas Kebersihan dan Pertamanan (DKP) Kota Cilegon pada tahun 2012 hanya mampu melakukan pengelolaan sampah sekitar 181.512,00 m 3 atau sekitar 49,7%. Dilain pihak, pemerintah daerah mentargetkan persentase pelayanan kebersihan di Kota Cilegon dapat meningkat menjadi 70% per tahun sehingga dapat dikatakan masih ada sekitar 50,3 % atau 183.702 m 3 yang tertinggal di sumber sampah di Kota Cilegon sehingga diperlukan adanya alternatif pengelolaan sampah yang dapat meningkatkan persentase pelayanan kebersihan di Kota Cilegon. Tujuan penelitian yang dilakukan adalah merancang model simulasi pengelolaan sampah Kota Cilegon dengan sistem dinamis untuk kemudian merancang beberapa alternatif pengelolaan sa...
Established since the 80s, PT. XYZ is an air compressor manufacturing industry located in Tangera... more Established since the 80s, PT. XYZ is an air compressor manufacturing industry located in Tangerang, Indonesia. In the production process, the Air compressor type L Unloading 1/4 HP has a very complex supply chain network which makes the supply chain network activities experience obstacles in the form of risks or potential risks that can occur so that it can disrupt the smooth running of the supply chain activities of the air compressor type L. Unloading 1/4 HP. However, PT. XYZ has not maximally implemented risk mitigation actions in its supply chain. The purpose of this study is to propose a mitigation action against risk events that occur along the supply chain of water compressor type L Unloading 1/4 HP using the FFMEA (Fuzzy Failure Mode and Effect Analysis) and FAHP (Fuzzy Analytical Hierarchy Process) methods. Based on the research, there were 29 identified risk events with 5 priority risk events. And of the 5 priority risk events, each has 2 proposed mitigation actions per p...
Jurnal Manajemen Informatika dan Sistem Informasi, 2021
Berdasarkan sumber informasi dari Badan Pusat Statistik (BPS), kita dapat mengetahui persentase k... more Berdasarkan sumber informasi dari Badan Pusat Statistik (BPS), kita dapat mengetahui persentase kemiskinan yang ada di seluruh provinsi Indonesia. Namun didalam data yang tersaji di BPS tersebut, kategori persentase kemiskinan yang disajikan hanya berdasarkan provinsi sedangkan dalam upaya untuk memberantas kemiskinan yang ada, pemerintah perlu mengetahui daerah manakah yang memiliki tingkat kemiskinan tinggi, sedang atau rendah sehingga pemerintah dapat menetapkan skala prioritas untuk menanggulangi kemiskinan tersebut. Oleh karena itu, perlu dilakukan pengelompokan provinsi yang ada di Indonesia berdasarkan tingkat kemiskinannya agar pemerintah dapat memberikan kebijakan atau pendekatan yang tepat dan cepat untuk mengatasi kemiskinan yang terjadi berdasarkan tingkat kemiskinan masing-masing provinsi. Pada penelitian ini digunakan metode clustering dengan algoritma K-Means untuk mengelompokan provinsi berdasarkan tingkat kemiskinannya dengan bantuan software Weka. Hasil penelitian ...
PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi... more PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi dalam yaitu divisi Wire Rod Mill (WRM) yang memproduksi wire rod (batang kawat). Selama ini divisi WRM mengukur kinerjanya dengan cara yang sederhana berdasarkan input dan output dalam satuan unit atau perseorangan dan tidak diukur biaya – biaya yang terkait dalam input dan output yang digunakan karena perusahaan belum memiliki metode yang sesuai untuk mengukur kinerjanya. Selain itu, belum ada penelitian yang mengukur efisiensi produksi di divisi WRM. Pada pengukuran efisiensi produksi divisi WRM ini menggunakan pertimbangan biaya produksi untuk memproduksi wire rod dengan metode Data Envelopment Analysis (DEA). Penelitian ini bertujuan untuk memperoleh nilai efisiensi teknis dan faktor yang mempengaruhi efisiensi DMU. Dengan menggunakan metode DEA, perusahaan dapat mengukur kinerja atau tingkat efisiensi produksi serta mengetahui faktor-faktor yang berpengaruh terhadap efisiensi prod...
PT. XYZ merupakan industri baja yang menghasilkan berbagai jenis produk baja salah satunya baja l... more PT. XYZ merupakan industri baja yang menghasilkan berbagai jenis produk baja salah satunya baja lembaran yang diproduksi oleh pabrik Slab Steel Plant yang terdiri atas 2 pabrik yaitu SSP1 dengan kapasitas 1juta ton/tahun dan SSP2 dengan kapasitas 800ribu ton/tahun. Objek penelitian ini difokuskan pada SSP1 karena memiliki kapasitas yang besar dan memiliki usia mesin yang lebih tua sehingga SSP1 sering mengalami downtime. Sistem produksi pada mesin yang digunakan adalah sistem yang memproduksi produk secara terus-menerus dalam volume besar, kerusakan pada salah satu komponen menyebabkan terhentinya keseluruhan fungsi sistem. Hal tersebut akan menyebabkan menurunnya kemampuan dari mesin yang dimiliki, maka perlu dilakukannya penjadwalan yang optimal untuk dapat mempertahankan performansi mesin. Tujuan penelitian yang dilakukan adalah menentukan komponen kritis pada mesin EAF5, menentukan nilai reliability komponen kritis mesin EAF5, mengidentifikasi terjadinya penyebab kegagalan pada ...
Pengendalian persediaan bahan baku merupakan hal yang sangat penting dalam proses produksi setiap... more Pengendalian persediaan bahan baku merupakan hal yang sangat penting dalam proses produksi setiap perusahaan manufaktur. Sebab bahan baku merupakan salah satu faktor yang menjamin kelancaran proses produksi. PT.XYZ merupakan perusahaan yang bergerak dibidang manufaktur yang kegiatan utamanya adalah memproduksi semen dengan menggunakan empat macam bahan baku yaitu klinker,pozzolan,limestone dan gypsum. Pada proses produksi yang terjadi di PT.XYZ masih terdapat permasalahan yang menghambat proses berjalannya produksi semen tersebut. Permasalahan yang terjadi yaitu proses produksi yang tidak didukung oleh ketersediaan bahan baku yang mencukupi sehingga mengakibatkan kontinuitas produksi terganggu yang dapat berakibat pada terhentinya proses produksi semen. Penelitian ini bertujuan untuk mengoptimalkan jumlah pemesanan bahan baku dengan menggunakan model inventori probabilistik Q backorder policy dengan kendala kapasitas gudang bahan baku sehingga persediaan akan bahan baku dapat terp...
PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi... more PT. XYZ merupakan perusahaan yang bergerak di bidang industri baja dan memiliki salah satu divisi dalam yaitu divisi Wire Rod Mill (WRM) yang memproduksi wire rod (batang kawat). Selama ini divisi WRM mengukur kinerjanya dengan cara yang sederhana berdasarkan input dan output dalam satuan unit atau perseorangan dan tidak diukur biaya – biaya yang terkait dalam input dan output yang digunakan karena perusahaan belum memiliki metode yang sesuai untuk mengukur kinerjanya. Selain itu, belum ada penelitian yang mengukur efisiensi produksi di divisi WRM. Pada pengukuran efisiensi produksi divisi WRM ini menggunakan pertimbangan biaya produksi untuk memproduksi wire rod dengan metode Data Envelopment Analysis (DEA). Penelitian ini bertujuan untuk memperoleh nilai efisiensi teknis dan faktor yang mempengaruhi efisiensi DMU. Dengan menggunakan metode DEA, perusahaan dapat mengukur kinerja atau tingkat efisiensi produksi serta mengetahui faktor-faktor yang berpengaruh terhadap efisiensi prod...
PT. XYZ adalah perusahaan yang beroperasi di bidang pelayanan pelabuhan laut khusus untuk bongkar... more PT. XYZ adalah perusahaan yang beroperasi di bidang pelayanan pelabuhan laut khusus untuk bongkar muat barang curah (bulk cargo). Proses bongkar muat di PT. XYZ belum sepenuhnya dapat dikatakan baik. Pada tahun 2013 waktu delay yang terjadi pada proses pembongkaran kargo pupuk adalah sekitar 89 jam dimana mengakibatkan terjadinya antrian kapal (congesty) dan perusahaan harus mengeluarkan biaya penalty. Salah satu cara untuk mengurangi waktu delay adalah dengan melakukan kegiatan-kegiatan pencegahan yang tentu saja akan mengeluarkan biaya yang disebut prevention cost. Penelitian ini bertujuan untuk menentukan nilai prevention cost paling minimal yang berdampak pada pengurangan waktu delay yang terjadi dengan menggunakan simulasi sistem dinamis. Metode penyelesaian masalah pada penelitian ini menggunakan simulasi sistem dinamis yang diawali dengan melakukan identifikasi masalah, konseptualisasi sistem dengan causal loop diagram (CLD), merancang stock flow diagram sebagai model simulas...
PT.XYZ merupakan salah satu perusahaan yang bergerak di bidang pembangkit listrik. Salah satu pro... more PT.XYZ merupakan salah satu perusahaan yang bergerak di bidang pembangkit listrik. Salah satu produk lain yang dihasilkan adalah timbulnya limbah padat, yaitu abu terbang (fly ash) dan abu dasar (bottom ash). Pada proses penyaluran fly ash dan bottom ash memiliki beberapa kendala diantaranya berupa transportasi yaitu conveyor yang digunakan dalam penyaluran abu yang tidak maksimal, adanya pluking (batubara yang menggumpal sehingga tidak berjalan lancar), maintenance yang tidak baik. Berdasarkan hal tersebut perlu dilakukan penelitian untuk mengetahui aktifitas apa yang terjadi pada proses fly ash dan bottom ash yang menyebabkan pemborosan terbesar. Metode yang digunakan untuk mengatasi pemborosan, digunakan pendekatan lean manufacturing dengan menitik beratkan pada 7 macam pemborosan yaitu overproduction, waiting, transportation, inappropriate process, unnecessary inventori, unnecessary motion, dan defect. Setelah dilakukan identifikasi terhadap seven waste, kemudian melakukan pemet...
Batik is one of the cultural assets that must be preserved because it plays an important role in ... more Batik is one of the cultural assets that must be preserved because it plays an important role in the local economy. At PT. Batik Banten there are risks in every activity of the supply chain, so should receive appropriate treatment due to the risks that arise can make the supply chain activities are not going well. PT. Batik Banten supply chain activity consists of the purchase of raw materials, the production process, the distribution process, and the sales process. The purpose of this study are to identify the risks that arise in the supply chain of Batik Banten products, to determine the critical risks in the supply chain of Batik Banten products and to propose risk management strategies at critical risk factors. The method for solving the problem in this research is integration of AHP (Analytical Hierarchy Process) and FMECA (Failure Mode, Effects and Criticality Analysis) to determine the value of the RPN (Risk Priority Number) based on the weight value/WRPN (Weighted Risk Prior...
Penerapan supply chain pada bongkar muat produk slab steel dan iron ore di PT.XYZ masih banyak... more Penerapan supply chain pada bongkar muat produk slab steel dan iron ore di PT.XYZ masih banyak ditemukan pemborosan, sehinggasehingga leadtime menjadi panjang. Lean supply chain adalah metode yang dapat dilakukan untuk mengindentifikasi adanya pemborosan dan menemukan penyebab–penyebab terjadinya pemborosan sepanjang aliran supply chain biji besi (iron ore) dan slab steel.maka digunakan pendekatan Define, Measure,Analyze, Improve Control (DMAIC) dan Value Stream Analysis Tools (VALSAT) sebagai langkah terstruktur untuk mengeliminasi segala bentuk pemborosan.usulan perbaikan. Pada aktivitas Slab Steel rencana perbaikan untuk menghilangkan waste agar dapat memperpendek lead time dengan menghilangkan aktivitas non value added, seperti aktivitas delay yaitu menunggu loading, dan juga menghilangkan aktivitas storage di PT.XYZ,selain itu memberikan training kepada seluruh supir untuk mematuhi standar operasional prosedur sehingga pengiriman ke stockpile PT.ABC dengan waktu 65 meni...
IKM Banten Art adalah IKM yang bergerak dalam industri kreatif dalam bidang kerajinan di kota Ser... more IKM Banten Art adalah IKM yang bergerak dalam industri kreatif dalam bidang kerajinan di kota Serang. IKM ini memproduksi berbagai jenis kerajinan handycraft gypsum berupa miniatur bangunan, hewan atau ciri khas Kota Serang. Latar belakang penelitian ini yang juga menjadi hambatan bagi IKM Banten Art adalah kurangnya sarana promosi, sehingga mempersulit pengenalan produk kerajinan ke masyarakat. Sarana promosi yang dilakukan IKM “Banten Art” saat ini hanya melalui media konvensional seperti brosur, pamflet dan lainnya. Salah satu sarana promosi yang efektif adalah melalui media internet. Tujuan penelitian ini adalah membuat suatu perancangan sistem pemasaran e-commerce berbasis website agar IKM “Banten Art” dapat menata manajemen pemasaran secara efektif yang dapat mendukung pengenalan produk industri kreatif kota Serang kepada masyarakat di seluruh Nusantara maupun luar negeri. Dengan dibuatnya sistem pemasaran e-commerce berbasis website ini maka diharapkan omzet penjualan dapat ...
Puskesmas merupakan fasilitas kesehatan yang terjangkau bagi seluruh kalangan masyarakat, khususn... more Puskesmas merupakan fasilitas kesehatan yang terjangkau bagi seluruh kalangan masyarakat, khususnya masyarakat menengah kebawah. Salah satu Puskesmas yang ada di Cilegon adalah Puskesmas Jombang. Pada Puskesmas ini ditemukan waktu pelayanan yang lama yang disebabkan oleh aktivitas-aktivitasyang tidak memberikan nilai tambah bagi pasien, sehingga waktu pelayanan lebih lama yaitu ±50 menit. Penelitian ini bertujuan untuk mengidentifikasi aktivitas-aktivitas VA, NVA, dan NNVA, merancang model simulasi menggunakan software Promodel, serta menentukan usulan perbaikan untuk mengurangi lead time pada pelayanan kesehatan di Puskesmas Jombang. Penelitian ini menggunakan metode lean healthcare dan simulasi dengan software Promodel. Hasil simulasi Promodel menunjukkan bahwa waktu rata-rata pelayanan di Puskesmas Jombang pada pasien umum dan pasien askes sebesar 3469,20 detik serta pasien JPS sebesar 3470,40 detik, sehingga dibuat beberapa rancangan perbaikan yang terdiri dari 3 skenario perb...
IOP Conference Series: Materials Science and Engineering, 2020
ABC plant is one of seven plants in XYZ industry which produce Cold Rolling Coil (CRC) and Cold R... more ABC plant is one of seven plants in XYZ industry which produce Cold Rolling Coil (CRC) and Cold Rolling Sheet (CRS). The problems faced by ABC plant in its supply chain network are the high overall costs of supply chain operations and the quantity of gas usage. The characteristics of this problem consist of more than one objective, the best method for solving this problem called multi-objective optimization. This research is aim to identify the decision variables that will be optimized and determine the optimal quantity of each decision variable using NSGA-II method. The parameters used in this research are the population size of 50, crossover probability with range 0.1-0.9, mutation probability 0.1 and 0.2 also the number of generation 50 and 100. The result shows that the selected parameters for this research are the crossover probability of 0.7, mutation probability of 0.1, number of generation 100. Four decision variables that are optimized, namely CRC produced (Lite, Medium, an...
Uploads
Papers by Achmad Bahauddin