• Strong background on material science and device physics. Direct experience on HDD, MRAM, STT-MRAM, spin-torque nano-oscillator and non-volatile memory • 5+ years hands-on experience in thin film deposition and characterization • Demonstrated proficiency in cleanroom nano-device fabrication and processing • Extensive experience in circuit design and troubleshooting • Comprehensive knowledge on maintaining cryogenic and ultra-high vacuum systems • Excellent written and verbal communication skills Supervisors: Stuart Wolf and Jiwei Lu
Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated who... more Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)-catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft-crosslinked membranes as polymer electrolyte membranes. The phenoxide-terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by (1) H NMR and tapping-mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase-separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30-90% relative humidity. The anisotropic proton conductivity ratios (σ(formula see text) ) of the membranes in water are in the range 0.65-0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft-crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.
Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated who... more Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)-catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft-crosslinked membranes as polymer electrolyte membranes. The phenoxide-terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by 1H NMR and tapping-mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase-separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30–90% relative humidity. The anisotropic proton conductivity ratios (σ⟂/||) of the membranes in water are in the range 0.65–0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft-crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.
DC current induced magnetization reversal and magnetization oscillation was observed in 500 nm la... more DC current induced magnetization reversal and magnetization oscillation was observed in 500 nm large size Co90Fe10/Cu/Ni80Fe20 pillars. A perpendicular external field enhanced the coercive field separation between the reference layer (Co90Fe10) and free layer (Ni80Fe20) in the pseudo spin valve, allowing a large window of external magnetic field for exploring the free-layer reversal. A magnetic hybrid structure was achieved for the study of spin torque oscillation by applying a perpendicular field > 3kOe. The magnetization precession was manifested in terms of the multiple peaks on the differential resistance curves. Depending on the bias current and applied field, the regions of magnetic switching and magnetization precession on a dynamical stability diagram has been discussed in details. Micromagnetic simulations are shown to be in good agreement with experimental results and provide insight for synchronization of inhomogeneities in large sized device. The ability to manipulate spin-dynamics on large size devices could be proved useful for increasing the output power of the spin-transfer nano-oscillators (STNOs).
This work provide a quantitative way to demonstrat the correlation between domain structure and m... more This work provide a quantitative way to demonstrat the correlation between domain structure and magneto-resistance. The magneto-resistance ratio (MR) was negative and exhibited evident enhancement in the resistivity at coercive fields above 175 K. The MR enhancement was attributed to the increase in the magnetic domain walls based on the quantitative correlation between the domain density and the resistivity. Below 175 K, the MR was positive and showed a quadratic dependence on the external magnetic field, which implied that the MR was dominated by Lorentz effects.
Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated who... more Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)-catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft-crosslinked membranes as polymer electrolyte membranes. The phenoxide-terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by (1) H NMR and tapping-mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase-separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30-90% relative humidity. The anisotropic proton conductivity ratios (σ(formula see text) ) of the membranes in water are in the range 0.65-0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft-crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.
Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated who... more Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide-terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)-catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft-crosslinked membranes as polymer electrolyte membranes. The phenoxide-terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by 1H NMR and tapping-mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase-separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30–90% relative humidity. The anisotropic proton conductivity ratios (σ⟂/||) of the membranes in water are in the range 0.65–0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft-crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.
DC current induced magnetization reversal and magnetization oscillation was observed in 500 nm la... more DC current induced magnetization reversal and magnetization oscillation was observed in 500 nm large size Co90Fe10/Cu/Ni80Fe20 pillars. A perpendicular external field enhanced the coercive field separation between the reference layer (Co90Fe10) and free layer (Ni80Fe20) in the pseudo spin valve, allowing a large window of external magnetic field for exploring the free-layer reversal. A magnetic hybrid structure was achieved for the study of spin torque oscillation by applying a perpendicular field > 3kOe. The magnetization precession was manifested in terms of the multiple peaks on the differential resistance curves. Depending on the bias current and applied field, the regions of magnetic switching and magnetization precession on a dynamical stability diagram has been discussed in details. Micromagnetic simulations are shown to be in good agreement with experimental results and provide insight for synchronization of inhomogeneities in large sized device. The ability to manipulate spin-dynamics on large size devices could be proved useful for increasing the output power of the spin-transfer nano-oscillators (STNOs).
This work provide a quantitative way to demonstrat the correlation between domain structure and m... more This work provide a quantitative way to demonstrat the correlation between domain structure and magneto-resistance. The magneto-resistance ratio (MR) was negative and exhibited evident enhancement in the resistivity at coercive fields above 175 K. The MR enhancement was attributed to the increase in the magnetic domain walls based on the quantitative correlation between the domain density and the resistivity. Below 175 K, the MR was positive and showed a quadratic dependence on the external magnetic field, which implied that the MR was dominated by Lorentz effects.
Uploads
Papers by Linqiang Luo