Synergistic analytical preconcentration with ionic liquid–nanomaterial hybrids

Accepted Manuscript Synergistic analytical preconcentration with ionic liquid-nanomaterial hybrids Estefanía M. Martinis, Alexander Castro Grijalba, María B. Pérez, Mauricio Llaver, Rodolfo G. Wuilloud PII: S0165-9936(17)30184-X DOI: 10.1016/j.trac.2017.10.004 Reference: TRAC 15022 To appear in: Trends in Analytical Chemistry Received Date: 28 May 2017 Revised Date: 2 October 2017 Accepted Date: 5 October 2017 Please cite this article as: E.M. Martinis, A.C. Grijalba, M.B. Pérez, M. Llaver, R.G. Wuilloud, Synergistic analytical preconcentration with ionic liquid-nanomaterial hybrids, Trends in Analytical Chemistry (2017), doi: 10.1016/j.trac.2017.10.004. This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain. ACCEPTED MANUSCRIPT Synergistic analytical preconcentration with ionic liquid- RI PT nanomaterial hybrids Estefanía M. Martinis, Alexander Castro Grijalba, María B. Pérez, Mauricio M AN US C Llaver and Rodolfo G. Wuilloud* Laboratory of Analytical Chemistry for Research and Development (QUIANID), Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Cuyo, Instituto Interdisciplinario de Ciencias Básicas (ICB), UNCUYO-CONICET, Padre J. Contreras AC C EP TE D 1300, (5500) Mendoza, Argentina. *Corresponding author. Tel: +54-261-4259738 E-mail address: rwuilloud@mendoza-conicet.gob.ar; rodolfowuilloud@gmail.com (R.G. Wuilloud) 1 ACCEPTED MANUSCRIPT Abstract Nanomaterials and ionic liquids (ILs) have very attractive properties for improved analytical preconcentration methods. Thus, ILs have been used as excellent RI PT tools to functionalize nanomaterials, giving them specific chemical properties for higher selectivity, extraction efficiency and extended re-utilization in preconcentration. Moreover, incorporation of IL-nanomaterial hybrids in miniaturized solid phase and M AN US C liquid phase microextraction procedures is being increasingly exploited to obtain high analytical recoveries while developing environmentally friendly analytical methods. In this review, the design and application of innovative and efficient analytical methods for sensitive and selective determination of inorganic and organic analytes is described. The synthesis of some IL-nanomaterial hybrids is presented along with a revision of the most important synergistic physicochemical properties useful for the extraction of D analytes. Finally, practical considerations concerning the application of IL-nanomaterial TE hybrids for the development of modern analytical separation and preconcentration EP techniques are fully discussed in this work. AC C Keywords: Ionic liquids; Hybrid nanomaterials; Functionalization; Sample preparation; Microextraction; Preconcentration. 2 ACCEPTED MANUSCRIPT Abbreviations: DI-SPME, Direct-immersion-solid-phase microextraction; DLLME, dispersive liquid-liquid microextraction; DLS, dynamic light scattering; D-M-SPE, Dispersive-magnetic-solid-phase extraction; D-µ-SPE, Dispersive-micro-solid-phase extraction; D-SPE, Dispersive-solid-phase extraction; EFS, Emission fluorescence spectroscopy; EF, Enhancement factor; ETAAS, Electrothermal atomic absorption RI PT spectrometry; FAAS, Flame atomic absorption spectroscopy; FES, Fluorescence emission spectrometry; GC-FID, Gas chromatography-flame ionization detector; GCMS, Gas chromatography-mass spectrometry; [diBOHTMG], N,N,N,N- tetramethylN’N’-butanol-guanidinium chloride; HF-SLPME, Hollow fiber-solid/liquid phase performance liquid M AN US C microextraction; HF-SPME, Hollow fiber-solid-phase microextraction; HPLC, High chromatography; chromatography-diode array chromatography-fluorescence HPLC-DAD, High detector; HPLC-FLD, detection; HPLC-PDA, performance liquid High-performance liquid High performance liquid chromatography-photodiode array detector; HPLC-UV-Vis, High performance liquid chromatography-ultraviolet-visible detector; HPLC-UV-VWD, High performance liquid chromatography-ultraviolet-variable wavelength detector; HS-SDME, Head space-single drop microextraction; HS-SPME, Headspace-solid-phase microextraction; D ICP-OES, Inductively coupled plasma optical emission spectrometry; IR, Infrared spectroscopy; LLE, Liquid-liquid extraction; LLME, Liquid-liquid microextraction; compounds; AFDCIL, TE LOD, Limit of detection; M-SPE, Magnetic-solid-phase extraction; NBs, Nitrobenzene 1,2-Ethanediaminium, N,N'-bis(2-aminoethyl)-N,N,N',N'- EP tetramethyl chloride; PAHs, Polycyclic aromatic hydrocarbons; RS, Raman scattering; SDME, Single drop microextraction; SEM, Scanning electron microscopy; SPE, Solid- AC C phase extraction; SPME, Solid-phase microextraction; TEM, Transmission electron microscopy; [TMG], Tetramethylguanidinium; UHPLC-MS/MS, Ultra high performance liquid chromatography-mass spectrometry/mass spectrometry; UV-vis, Ultraviolet-visible spectroscopy; XPS, X-ray photoelectron spectroscopy; XRD, X-ray diffraction spectroscopy; [cmmim]Cl, 1-Carboxymethyl-3-methylimidazolium chloride; DABCO, 1,4-Diazabicyclo[2.2.2]octane; [C10C10mim]Cl, 1,3-Didecyl-2- methylimidazolium chloride; [C16mim]Br, 1-Hexadecyl-3-methylimidazolium bromide; [Simam]Cl, (2-Hydroxyethyl)-N,N-dimethyl-3-(triethoxy)silypropyl-ammonium chloride; [C18mim]Br, 1-Octadecyl-3-methylimidazolium bromide; [C6mim][PF6], 1Hexyl-3-methylimidazolium methylimidazolium hexafluorophosphate; bis(trifluoromethylsulfonyl)imide; 3 [C6mim][Tf2N], 1-Hexyl-3- [C7mim][PF6], 1-Heptyl-3- ACCEPTED MANUSCRIPT methylimidazolium hexafluorophosphate; [C8mim][PF6], 1-Octyl-3-methylimidazolium hexafluorophosphate; [mim][PF6], Methylimidazolium hexafluorophosphate; [Vmim]I, 1-Vinyl-3-methylimidazolium iodide; [VC8im]I, 1-Vinyl-3-octylimidazolium iodide. RI PT 1. Introduction Current trends in modern analytical chemistry are focused on the development of green, simple and highly sensitive methods for the determination of trace analytes. M AN US C Sample preparation methods based on extraction and preconcentration prior to analyte determination have undergone intensive research, due to increasing need for accurate and precise measurements at extremely low concentration levels of inorganic and organic analytes in complex matrices [1]. Furthermore, innovations following green chemistry concepts have been introduced for the development of modern preconcentration methods through miniaturization and the use of new extractant phases D and emerging materials that might be more environmentally friendly when compared TE with conventional volatile organic solvents [2]. The introduction of nanotechnology in analytical chemistry and, particularly, the EP application of emerging materials like nanoporous materials and nanoparticles for AC C developing novel solid phase extraction (SPE) or liquid-liquid extraction (LLE) methods, is a very attractive alternative for the separation and preconcentration of trace elements [3]. This is due to the high surface area of several nanomaterials and their chemical stability in both organic and inorganic media -which allows their effective application in samples with diverse chemical matrices- along with other favorable properties such as large adsorption capacity and fast sorption kinetics, key factors concerning their analytical applicability [3]. On the other hand, it has been demonstrated that ionic liquids (ILs) can be efficient tools to improve limits of detection, selectivity 4 ACCEPTED MANUSCRIPT and sensitivity when implemented in extraction and preconcentration methods [4]. There are no doubts that ILs represent valid alternatives to common volatile organic solvents that are normally used in analytical chemistry, due to the high recoveries and sensitivity enhancement factors obtained after their application [5]. Furthermore, RI PT practicality, safety and cost-effectiveness of implementing ILs in microextraction techniques, are real advantages for developing environmentally friendly analytical methods. However, limitations in the use of ILs for analytical extraction have been M AN US C found, for example, due to high solubility of some ILs in water [6]. Therefore, the use of ILs supported on solid nanomaterials can be considered a valuable approach to overcome this difficulty. Another drawback of implementing ILs in extraction methods is caused by their high polarity, which might limit the extraction of certain analytes. In this case, dispersions of nanomaterials in ILs can be synergistically used to enhance the extraction efficiency of analytes [7]. Taking this into consideration, along with the D potential advantages resulting from the combination of ILs and nanomaterials, the use TE of IL-nanomaterial hybrids is a promising approach for the development of microextraction techniques. In recent years, there has been a rapid growth in the number EP of analytical methods using IL-nanomaterial hybrids for SPE and LLE. The individual application of IL or nanomaterials in extraction/preconcentration methods has increased AC C dramatically since the beginning of the 2000s decade. Moreover, since 2006, ILs and nanomaterials are being successfully combined to improve the performance of extraction/preconcentration techniques for several analytes (Fig. 1). The aim of this review is to provide an overview of novel IL-nanomaterial hybrids that have been implemented as novel sorption materials in preconcentration techniques and their potential for inorganic and organic (ultra)trace (< 1 µg L-1) analysis. A description of ILs, nanomaterials and their combinations, along with information on 5 ACCEPTED MANUSCRIPT existing classes and most significant properties, is provided. Also, a full evaluation of the performance of IL-nanomaterial hybrids during the development of extraction and preconcentration techniques is presented. Moreover, a discussion on the experimental strategies and possible mechanisms involved in the extraction of analytes by IL- RI PT nanomaterial hybrids is included. In fact, particular attention is given in this review to emerging solid-phase microextraction techniques using the synergistic potential of the M AN US C sorbent materials. Finally, trends and future developments in this field are discussed. 2. Ionic liquids and nanomaterials: selected physicochemical properties useful for extraction and preconcentration Hybrid materials resulting from the combination of ILs and nanomaterials are synthesized with the aim of retaining the properties of both counterparts. Some of these D properties are: negligible vapor pressure, tunable composition and polar character, high TE chemical and thermal stability -from ILs-, and others like novel magnetic, optical, and surface properties, from nanomaterials. The main physicochemical properties of ILs, EP nanomaterials and their hybrids (IL-coated and IL-functionalized nanomaterials) are shown in Fig. 2. However, besides some selected properties of IL-nanomaterial hybrids, AC C practical considerations to implement them during the development of extraction and preconcentration methods will be discussed. 2.1 Ionic liquids Ionic liquids are semi-organic salts existing in the liquid phase at temperatures below 100°C [4]. They usually consist of bulky asymmetric organic cations and organic or inorganic anions. These modern solvents have specific physical properties, such as 6 ACCEPTED MANUSCRIPT non-combustibility, negligible vapor pressure, high heat resistance and high ionic conductivity. Some of these properties, such as the thermal stability and solubility in different solvents, depend mainly on the anion; while others, such as viscosity, surface tension and density, depend on the cation, the length of its alkyl chain, its structure and RI PT symmetry. Taking this into consideration, the aforementioned properties can be adjusted to a particular chemical application by changing the cation or anion’s characteristics. For this reason, they have been named ‘designer solvents’ and are useful for important M AN US C applications, such as liquid-liquid microextraction (LLME) methods [5]. Nevertheless, it should be pointed out that the intrinsic characteristics of some ILs may act as setbacks during LLME. For instance, ILs usually have a high viscosity, making the efficient mixing of aqueous and IL phases difficult [5]. Furthermore, partial solubilization of hydrophobic ILs in aqueous solutions not only results in extraction efficiency losses, but also modifies their properties due to water uptake [6]. Moreover, hydrophilic ILs have D been scarcely used in LLE and they have found application only in in situ-dispersive TE liquid-liquid microextraction (DLLME). In this case, an hydrophilic IL has been employed as extractant phase and an anion exchange reagent, such as NaBF6, has been EP added to promote a methatesis reaction and transform the IL into a hydrophobic one [8]. Taking this into account, along with the possibility of coupling ILs with varied AC C materials, the development of new solid phase microextraction (SPME) and liquid phase microextraction (LPME) methods based on IL-nanomaterial hybrids constitutes an interesting alternative. Other important characteristics of ILs that have promoted their combination with nanomaterials, refer to their properties as surfactants. Thus, ILs have been used as stabilizers in the preparation of colloidal dispersions of silica, carbon nanotubes (CNTs) and metal nanoparticles (NPs) [9]. In the case of CNTs, for example, ILs can modify 7 ACCEPTED MANUSCRIPT their surfaces by changing their electronic structure and, accordingly, their electrical, optical and sorptive properties, among others [10]. Therefore, the interaction with ILs can generate surface changes on nanomaterials, which can be synergistically exploited RI PT to obtain hybrids for different uses, such as preconcentration and extraction [11]. 2.2 Nanomaterials M AN US C The use of nanomaterials for various chemical applications has increased in recent years due to their unique properties, such as large specific surface area and multiple active sites for adsorbing analytes. CNTs (specific surface area: 50-1315 m2/g [12]) are the strongest of all known nanomaterials and have remarkable physical properties, such as excellent thermal conductivity and electrical properties, and outstanding field emission characteristics [13]. In fact, the highly hydrophobic surface D of CNTs facilitates the strong adsorption of certain compounds by non-covalent forces, TE such as π-π stacking, electrostatic forces, Van der Waals forces and hydrophobic interactions. Therefore, CNTs are one of the most important sorption materials being EP intensively applied for analyte preconcentration [13]. Another important and more recent carbon-based nanomaterial is graphene. It is a crystalline, bidimensional carbon with interesting AC C allotrope, physicochemical properties for extraction and preconcentration, including large surface area (2630 m2/g), high dispersibility and hydrophobicity [14]. Also, many applications have involved graphene oxide (GO), which maintains most of the properties of graphene, but shows a more hydrophilic character [15]. Moreover, both graphene and GO present advantages when compared with CNTs, mainly due to their higher surface area (890-2630 m2 g−1 [16, 17]), a consequence of both faces of these materials being exposed, thus increasing the availability for interactions [15]. 8 ACCEPTED MANUSCRIPT Nanometer-sized inorganic oxides, namely nano-SiO2, Al2O3, TiO2, B2O3, Nb2O5, among others, have been widely used in SPE and its variants for preconcentration and/or separation. Among these, metal oxide NPs like Mn3O4 and ZrO2, are a class of nanosized materials with notable increased surface area (108-170 RI PT m2/ g [18]), high sorption capacity and strong acid sites. These characteristics make them good sorbents for removing metal ions from different samples [19]. Many benefits derive from the use of these nano-sized oxides, as their properties M AN US C depend on various factors that can be controlled during their preparation. Nano-Al2O3 presents a variety of possible shapes, such as rod, fibrous, flake and spherical. These, along with its porous structure and size, are closely related to its physicochemical properties and, hence, to its possible applications in analytical procedures, allowing great flexibility in order to meet diverse needs [20]. Likewise, nano-TiO2 can be obtained by simple synthesis, are stable and represent a non-toxic alternative, that has D been widely used in analytical applications as support for chemical functionalization [21, TE 22]. EP However, the poor specificity of these nanomaterials towards analytes makes them unsuitable for the analysis of samples with complex matrices. Therefore, physical AC C or chemical modification can be very attractive to overcome this drawback. Another problem concerning the use of metal oxide NPs for the development of dispersive microextraction techniques stems from the possibility of flocculation or gel formation in water based systems, turning the further separation of the analyte-enriched NPs extremely difficult. To overcome these drawbacks, in some cases such as Mn3O4, the NPs have been coated with an inert material like silica, in order to prevent their aggregation and lead to efficient dispersion [19]. 9 ACCEPTED MANUSCRIPT Among the different properties showed by some nanomaterials, magnetism has been rapidly exploited in analytical chemistry, especially for the development of extraction and preconcentration methods, due to the possibility of easily collecting the magnetic NPs after the retention of analytes with the application of an external magnetic RI PT field. Their applications and magnetic properties depend highly on size distribution, morphology, structure and the surface functional groups present in the prepared nanomaterial [23]. Fe3O4 NPs have been widely used as magnetic nanosorbents and M AN US C have found combination with ILs, as well as others nanomaterials such as graphene and CNTs, for the development of magnetic-solid-phase extraction (M-SPE) techniques [14]. 2.3. Ionic liquid-coated nanomaterials Non-covalent coating methods offer a simple manner to modify the surface of diverse nanomaterials without altering their chemical structure. In this case, the coating D of nanomaterials is obtained based on physisorption phenomena. Moreover, electrostatic TE and Van der Waals forces are the most common interactions occurring on the surface of EP NPs with charged functional groups. Thus, positively or negatively charged ion clusters, instead of separate ions, surround the surface of NPs, generating an electrical double AC C layer [24]. Hydrogen bonding is also responsible for the interaction between NPs and hydroxyl- and/or oxy- moieties on their surface (such as silica or metal oxides) and ILs with hydrogen donor or acceptor groups. In these cases, there exists a competition between NP-IL and IL-IL hydrogen bonds, which is highly dependent on environmental factors such as temperature and pressure [25]. The process to obtain IL-coated nanomaterials is usually based upon the impregnation of the nanomaterial with a specific IL. This impregnation is performed by direct contact, either by slow dropwise addition or by dispersion of the nanomaterial in 10 ACCEPTED MANUSCRIPT the IL phase during a defined period of time. Other reagents, such as ethanol, could be used as solvents or dispersers of the IL. Afterwards, the nanomaterial is washed, filtered and dried (Fig. 3). Then, the IL-nanomaterial hybrid can be employed for the development of preconcentration methods [14]. Although the process for preparation of RI PT IL-coated nanomaterials is simple, limited stability of the sorbent caused by the leaching of the IL from the nanomaterial has been observed [26, 27]. For the characterization of the obtained IL-nanomaterial hybrids different M AN US C techniques have been employed as scanning electron microscopy (SEM), transmission electron microscopy (TEM), infrared spectroscopy (IR), Raman scattering (RS), X-ray photoelectron spectroscopy (XPS), elemental analysis, X-ray diffraction (XRD) spectroscopy (XRD), Z potential, dynamic light scattering (DLS) among others [14, 28, 29]. Several nanomaterials have been coated using the procedures mentioned in Fig. D 3 and Table 1. Some examples include: single and multi-walled carbon nanotubes TE (SWCNTs, MWCNTs), magnetic NPs (MNPs) with core-shell structures -such as silicacoated magnetite (Fe3O4@SiO2)-, nanocellulose, nanosilica, nanotitania, nanomagnesia EP and graphene. Magnetic hybrid nanomaterials show the additional advantage that the separation and collection of the sorption phase can be performed easily by an external AC C magnetic field, thus eliminating time-consuming steps like centrifugation or filtration. Common ILs, such as those containing the imidazolium cation, have been used in many works for coating several nanomaterials [e.g. 1-heptyl-3-methylimidazolium hexafluorophosphate ([C7mim][PF6]), 1-octadecyl-3-methylimidazolium bromide ([C18mim]Br), 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), 1hexadecyl-3-methylimidazolium bromide ([C16mim]Br), 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C6mim][Tf2N], 11 1-octyl-3-methylimidazolium ACCEPTED MANUSCRIPT hexafluorophosphate ([C8mim][PF6])] [21, 30-35]. However, less common ILs (Table 2), such as guanidinium [14], polymeric ILs (PILs) (i.e. ILs obtained by the polymerization of an IL as monomer) [13] and a thiourea-functionalized imidazolium cation with a bis(trifluoromethylsulfonyl) imide anion [36], have been used for RI PT preparing IL-nanomaterial hybrids during the development of novel preconcentration methods. In these cases, particular interactions between the ILs adsorbed on the surface of nanomaterials and the analytes could be expected. For example, when protein M AN US C preconcentration was performed with guanidium-based ILs supported on a magnetic chitosan-GO composite, the aromatic amino acids present in the proteins (i.e. tryptophan, phenylalanine and tyrosine) were responsible for the extraction, due to the hydrophobic interaction of the analytes with the long alkyl chains of the IL [14]. Also, in the extraction of phthalate esters using a fiber coated with a MWCNT-PIL hybrid, ππ, n-π and hydrophobic interactions were responsible for the extraction of the organic D compounds. In this case, the improved extraction yield was attributed to an additional TE interaction between the protophilic esters of the phthalates and the cationic domains of the PILs [13]. In the determination of Pb, Saljooqi et al. synthesized a task-specific IL EP (TSIL) by attaching a thiourea group to an imidazolium cation, which was capable of selectively capturing Pb2+, and immobilized it on MWCNTs [36]. AC C Finally, a different approach has been the use of surface active ILs (SAILs), which have surfactant properties as a consequence of their amphiphilic nature. This is usually due to the presence of long alkyl chains in one or both ions of the IL structure. The ability of ILs to form organized structures such as hemimicelles and admicelles have been applied for the coating of NPs. Hemimicelles are monolayers of surfactants associated to surfaces, while admicelles are bilayer arrangements; both usually at concentrations below the Critical Micellar Concentration (CMC). This method has been 12 ACCEPTED MANUSCRIPT applied for the determination of flavonoids, using [C16mim]Br mixed hemimicelles (a combination of hemi- and admicelles) supported on MCNTs@SiO2, where π-π, hydrophobic and electrostatic interactions between the mixed hemimicelles and flavonoids yielded a high extraction efficiency [33]. Recently, cephalosporins in RI PT biological samples and fluoxetin in different matrices were also successfully determined with a [C16mim]Br mixed hemimicelles coating on magnetic GO NPs [37] and magnetic M AN US C graphene [38], respectively. 2.4. Ionic liquid-functionalized nanomaterials In contrast with IL-coated nanomaterials, chemical functionalization with ILs involves the formation of covalent bonds between moieties within the IL structure and functional groups on the surface of the nanosorbent. This strategy offers some D advantages over the non-covalent approaches based on physisorption in terms of TE flexibility at the time of selecting an IL and control over the functionalization degree. Nevertheless, it must be pointed out that disadvantages in terms of simplicity, time and EP waste generation also arise when functionalization is chosen over coating, since one or usually more chemical reactions are required [26]. Also, in certain occasions, harsh AC C chemical treatment for functionalization results in the destabilization of the nanostructure and generation of unwanted surface alterations [39]. As for the stability of the hybrids, not much information is available from analytical works, but deeper studies have been conducted in cases where combinations of ILs and nanoparticles were used for catalysis. Although somehow obvious, different works point out the fact that chemical functionalization results in hybrids which endure a higher number of (re)uses, when compared to coated hybrids, mainly due to less leeching of the IL from the hybrid [27]. 13 ACCEPTED MANUSCRIPT The properties of NPs depend not only on their diameter, shape and sizedistribution, but also on the type of nanoparticle stabilizer and the nature of the interaction between the surface and the stabilizer [40]. Particles in the nanoscale range have an intrinsic instability, which results in the tendency to form agglomerates. For RI PT example, magnetic NPs (MNPs) are highly chemically active and are easily oxidized in air, which results in loss of magnetism and dispersibility [40]. For applications in extraction processes it is important to develop protection strategies to chemically M AN US C stabilize NPs. In fact, stabilization of NPs by organic coatings allows further manipulation and solubility control, which facilitates their application in µ-SPE [41]. Among the factors involved in that stabilization, short range interactions which depend on the individual nature of the molecules, such as structural and solvophobic interactions, play an important role [42]. Structural forces arise as solvation layers around the nanomaterial are squeezed out of the closing gap when two solid surfaces D approach each other, thus providing structural repulsion and preventing aggregation. TE Solvophobic forces, on the other hand, appear as a consequence of entropic factors related to the polar affinity between the surface of the nanomaterial and the IL, which EP translates into better dispersibility in systems in which the surface hydrophobicity is AC C similar to that of the IL [43]. The use of tunable properties of ILs for surface modification of nanometer sized materials has been demonstrated to provide a new way to control the properties of the resulting ILs-nanomaterial hybrids [44-46]. Furthermore, functionalization also provides extra selectivity when nanomaterials are used as separation media. Different nanomaterials have been chemically functionalized with ILs for diverse analytical applications. As shown in Table 3, magnetic composites such as 14 ACCEPTED MANUSCRIPT Fe3O4@SiO2 NPs and CNTs have been widely preferred to develop novel preconcentration methods. Covalent functionalization of CNTs by imidazolium-type ILs has been proposed by some authors and solubility, rheological and tribological properties of the resulting materials have been studied. [41]. These investigations have RI PT opened ways into new alternatives for the use of ILs and CNTs in analytical preconcentration. Functionalization of CNTs has been performed by two different methods [47, 48]. In one of them, CNTs were initially purified and oxidized using a M AN US C strong acid to introduce carboxyl groups, which allows the grafting of amine or hydroxyl terminated ILs onto the CNT surface [48]. The carboxylic acid groups of the surface were activated using either thionyl chloride (SOCl2) or N,N´- dicyclohexylcarbodiimide (DCC) in DMF . In the other approach, the reaction between an imidazole derivative and the activated surface of the CNT through its functional group was performed. Then, the reaction with an alkyl halide gave the corresponding D IL-functionalized CNTs [26, 47]. The synthetic routes are displayed in Fig. 4. The TE SPME technique based on IL-functionalized CNTs has been one of the most applied for preconcentration, but there have been studies on the dispersibility of IL-nanomaterial EP hybrids that could be exploited to expand the applications of this type of nanomaterials in extraction systems. For example, in 2006, Park et al. reported the covalent AC C modification of MWCNTs with imidazolium salt-based ILs and studied the effect of different anions on their dispersion [41]. It was concluded that the relative dispersion and the phase-transfer of the IL-functionalized MWCNTs could be varied following an anion exchange process. New methods based on an “in situ solvent formation microextraction” technique could be further developed by taking advantage of this property. 15 ACCEPTED MANUSCRIPT Furthermore, ILs have been employed to functionalize the surface of MNPs (ILMNPs) (Table 3). The coating of MNPs’ surfaces with a layer of silica has been vastly applied before modification with ILs in order to prevent the oxidation of Fe3O4. Furthermore, surface silanol groups offer many possibilities for covalent modification RI PT of MNPs, such as the use of ILs with an -OH functionalized cation. Generally, the functionalization procedure consisted in the dispersion of silica-coated NPs in toluene by ultrasonication during 15 min, followed by addition of the IL and stirring of this M AN US C mixture at 120 °C for two days. After the reaction, the NPs were washed with a water/ethanol mixture. Finally, the particles were dried under vacuum at 70 °C for 24 h. It can be considered that IL-MNPs synergistically combine the advantages of magnetic particles and ILs, thus resulting in a sorption material with outstanding properties for SPE. The MNPs have a high surface area-to-volume ratio, which results in rapid extraction and makes the retention of target compounds with the lowest amount of D sorption material feasible. Additionally, ILs have a great extraction capability towards EP and hydrogen bonding. TE different analytes thanks to different interactions that include electrostatic, hydrophobic AC C 3. Solid-phase microextraction with IL-nanomaterial hybrids SPE is a preconcentration technique with several advantages including: simplicity of operation, versatility, low cost of equipment, short extraction time, reduction or elimination of organic solvents and possible automation, among others. An important aspect of this technique is the material used as sorbent. In this sense, ILnanomaterial hybrids have introduced novel dimensions into SPE due to the special properties mentioned earlier in this review [19, 35, 36, 49]. 16 ACCEPTED MANUSCRIPT 3.1. Dispersive solid-phase extraction In addition to conventional SPE, dispersive SPE (D-SPE) is an attractive approach based on the use of a solid phase dispersed in a liquid sample or extract. A RI PT miniaturized and quite exploited variant of D-SPE technique is dispersive micro-SPE (D-µ-SPE), in which only a few micrograms of the solid phase are dispersed for analyte retention [50-53]. Strikingly good results were achieved by Serrano et al., who proposed M AN US C the use of 1-butyl-3-aminopropylimidazolium chloride-functionalized GO as adsorbent for D-µ-SPE and applied it for the determination of four anabolic steroids and βblockers in environmental water samples. Limits of detection (LODs) as low as 7 ng L-1 and enhancement factors (EFs) as high as 4843 were obtained, using high performance liquid chromatography-diode array detector (HPLC-DAD) for detection [52]. Furthermore, nano-Al2O3 was functionalized with the hydrophobic IL Aliquat-336 was D used for the preconcentration of inorganic Se species in diverse water samples. The TE coupling of this procedure with inductively coupled plasma optical emission EP spectrometry (ICP-OES) detection allowed an EF of 850 and an LOD of 4.6 ng L-1, AC C which are proof of the remarkable efficiency obtained with IL-nanomaterial hybrids. 3.2. Magnetic solid phase extraction M-SPE is one of the most explored variants of SPE [14, 30, 33, 34, 37, 38, 44, 46, 53-83]. This is because M-SPE presents the following advantages: high extraction efficiency due to the outstanding surface area of the nanomaterials, fast separation by means of a magnetic field, possibility of modifying the surface of nanoparticles with functional groups to increase analytical selectivity, good dispersibility of the sorbent in aqueous media and the possibility of reutilizing the nanomaterial several times. ILs have 17 ACCEPTED MANUSCRIPT been employed along with MNPs both as classical monomeric ILs or as PILs. Generally, the MNPs are protected by a chemical layer such as -SiOH groups or -NH2 groups, among others, to which ILs are attached. For example, Shi et al. [76] used Fe3O4 as magnetic nanomaterial, protected by 3-(trimethoxysilyl)propyl methacrylate. The IL RI PT employed in the functionalization was 1-vinyl-3-methylimidazolium iodide. The magnetic IL-nanomaterial hybrid was employed for the extraction of polycyclic aromatic hydrocarbons (PAHs) from tea and coffee samples. The methodology required M AN US C the use of only 1 mg of nanomaterial for the microextraction process. A volume of 50 mL of sample yielded high preconcentration factors for all the evaluated analytes (between 106.3 to 123.8). Furthermore, the hybrid under study allowed 20 extraction cycles without a significant loss of the extraction efficiency and low LODs, in the range of 0.1 to 10 ng L-1, were obtained. The high affinity between the analytes and the IL present on the nanomaterial was attributed to strong π-π and hydrophobic interactions D between the aromatic moieties of the analytes and the IL. TE Polymeric ILs have been explored as an alternative to monomeric ILs since the properties of conventional ILs such as: i) selectivity towards analytes, ii) high thermal EP stability and iii) viscosity, can be improved. For example, Yang et al. [81] employed Fe3O4 NPs protected with silanol groups that were functionalized with a PIL based on 1- AC C vinilimidazolium as polymeric cationic backbone with bis(trifluoromethane)sulfonamide as anion. In this particular case, the nanomaterial was synthesized employing microwaves to reduce the reaction time and side reactions, while increasing yield and reproducibility. The hybrid nanomaterial was employed for the determination of sulfonylurea herbicides in soil samples, using only 60 mg of MNPs were employed. LODs were in the range of 1.62 to 2.54 µg L-1 and analytical recoveries between 81.8 and 97.6% were obtained which demonstrates the suitability of the IL- 18 ACCEPTED MANUSCRIPT nanomaterial hybrid for the analytisis of complex samples. Relative standard deviation (RSD) values were between 3.2 and 4.5%. It has to be pointed out that these analytical figures of merit were obtained with a UV-Vis detector, which is not as sensitive as others normally used within HPLC, such as MS or DAD. It can be concluded that the RI PT remarkable efficiency of the PILs-NPs hybrids for preconcentration made the sensitive determination of the analytesfeasible. M AN US C 3.3. Solid phase microextraction based on coated and hollow fibers Besides the aforementioned utilities, SPME can be considered an important technique to promote solvent-free preconcentration. Based on the use of extractantcoated fibers, SPME allows facile and effective extraction with milligram amounts of material. Different applications of this technique have been reported taking advantage of the implementation of IL-nanomaterial hybrids. Classic SPME, referred also as direct- D immersion SPME (DI-SPME) involves the direct contact of the sorbent-coated fiber TE with the sample solution for extraction. To cite an example, fibers made of MWCNT coated with PILs have been applied for the determination of halogenated aromatic EP hydrocarbons [13] and PAHs [84] via DI-SPME with good results. Furthermore, AC C headspace SPME (HS-SPME) is as an attractive choice for preconcentration of volatile analytes, since by exposing the sorbent coating to the headspace of the sample solution, contact with the sample matrix is avoided. An application of the HS-SPME technique implementing an IL-nanomaterial hybrid has been studied,involving the use of MWCNTs functionalized with a PIL (1,1'-(1,6-hexanediyl)bis(1-vinylimidazolium) bishexafluorophosphate) for the preconcentration of 2-naphtol in fruit samples prior to analysis by GC. Excellent repeatability (RSD = 2.56%), good recoveries and remarkable independence from matrix effects were obtained [85]. Similar results were 19 ACCEPTED MANUSCRIPT found in the determination of 16 volatile compounds in cheeses by HS-SPME coupled to gas chromatography-flame ionization detector (GC-FID) [86]. Most recently, the development of hollow-fiber SPME (HF-SPME) has introduced improvements related mostly to the limited lifetime due to sorbent desorption of SPME fibers by including a RI PT barrier between the extractant and the sample solution. For example, Es’hagi et al. developed a method based on HF-SPME preconcentration for the determination of benzodiazepines in hair, urine and wastewater samples. Novel TiO2 NPs coated with 1- M AN US C pentyl-3-methylimidazolium bromide were synthesized. LODs in the low ng mL-1 range were achieved for several benzodiazepines, with excellent EFs between 533 and 1190 [22]. 3.4. On-line extraction and preconcentration methods Up until now, and to the knowledge of the authors of this review, there have D been only three works reporting the application of IL-nanomaterial hybrids for on-line TE processes [49]. One of these works consisted in the preconcentration and determination of nitrophenols by capillary electrophoresis-UV-Vis (CE-UV-Vis). The sorbent material EP was prepared by mixing [C6mim][PF6] and MWCNTs in a mortar and the mixture was loaded into a fused silica channel (1 mm i.d. and 4 mm length) using a piston to AC C compact the material inside the preconcentration unit. In the process, the sample (400600 µL) was placed in a CE vial and the preconcentration unit was moved down into the vial, forcing the sample to flow through the sorption hybrid material by positive pressure. Once the treated sample was discarded, a methanolic KOH solution was used for elution. This design presented several advantages: the preconcentration channel could be attached directly to CE instrument, its analytical performance was good and it was a less expensive approach for preconcentration of this type of analytes. 20 ACCEPTED MANUSCRIPT In another work, Zou et al. determined Cd(II) and Cu(II) in environmental water by flame atomic absorption spectroscopy (FAAS) after preconcentration using a column packed with nano-TiO2 functionalized with [C8mim][PF6] [35]. In this case, the ILnanomaterial hybrid allowed faster loading of the analytes into the preconcentration RI PT column and higher retention than non-functionalized TiO2 NPs. Likewise, better LODs, as low as 0.1 µg L-1, were achieved, while excellent analytical recoveries were obtained during at least 10 preconcentration-elution cycles. Also, Abdolmohammad-Zadeh et al. M AN US C prepared an Mn3O4@SiO2-1-methyl-3-[(3-trimethoxysilyl)propyl]imidazolium chloride hybrid that was packed in a polypropylene cartridge and applied for the preconcentration and determination of Ag(I) in radiology films. An EF of 50.8 was achieved and no decrease in analyte recovery was observed with up to 300 adsorptiondesorption cycles [19]. Therefore, the above-mentioned works show the convenience of implementing IL-nanomaterial hybrids in preconcentration techniques for efficient on TE D line-SPE methods. 4. Conclusions and future trends EP Novel sorption materials resulting from the combination of ILs and AC C nanomaterials have fostered the development of more efficient analytical methods for trace analytes determination. The excellent properties obtained with IL-nanomaterial hybrids add further alternatives to improve preconcentration and extraction methods or to develop new ones for different analytes and in more challenging matrices. High enrichment factors have been obtained as a result of elevated sample-to-extraction phase ratios, which have been possible thanks to the remarkable surface area of these nanomaterials. Thus, the high retention capacity showed by these materials has allowed trace determination of inorganic and organic analytes. Likewise, negligible consumption 21 ACCEPTED MANUSCRIPT of solvents and reagents, minimal waste generation and the possibility of recycling these sorbents has contributed to develop greener extraction and preconcentration methods. In future years, further developments and applications of IL-NP hybrid materials will be focused on the design of novel preconcentration techniques which will emerge RI PT as a consequence of the special properties of these materials (high analyte retention, dispersibility, chemical and physical stability, multiple options for functionalization, etc.). Thus, for example, MNPs functionalized with different ILs might lead to tunable M AN US C retention materials designed for complex samples in addition to high retention and preconcentration. Furthermore, different procedures for synthesis, functionalization and coating of nanomaterials with ILs should be studied in order to enhance their physicochemical stability, lifecycle and selectivity. Finally, additional research on the structure-property relationships of IL-nanomaterial hybrids shall provide the possibility of preparing tunable sorption materials for specific applications and highly complex D matrices. Therefore, new and automated preconcentration techniques are expected to be TE developed in order to fully exploit the potential of IL-nanomaterial hybrids in sample EP preparation. AC C Acknowledgements This work was supported by Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Agencia Nacional de Promoción Científica y Tecnológica (FONCYT) (PICT-BID 2013-0072 and 2013-0957), Organization for the Prohibition of Chemical Weapons (OPCW) and Universidad Nacional de Cuyo (Argentina). 22 ACCEPTED MANUSCRIPT References AC C EP TE D M AN US C RI PT [1] M. de la Guardia, S. Garrigues, Challenges in Green Analytical Chemistry, RSC Publishing, Cambridge, 2011. [2] G. Ouyang, New materials in analytical chemistry, Trends Anal. Chem., 39 (2012) 1-2. [3] C. Bendicho, I. Costas-Mora, V. Romero, I. Lavilla, Nanoparticle-enhanced liquidphase microextraction, Trends Anal. Chem., 68 (2015) 78-87. [4] F. Moosavi, The Structure of Supported Ionic Liquids at the Interface, Ionic Liquids - New Aspects for the Future, Dr. Jun-ichi Kadokawa ed., InTech, Croatia, 2013. [5] E.M. Martinis, P. Berton, R.G. Wuilloud, Ionic liquid-based microextraction techniques for trace-element analysis, Trends Anal. Chem., 60 (2014) 54-70. [6] S.L.I. Toh, J. McFarlane, C. Tsouris, D.W. DePaoli, H. Luo, S. Dai, Room‐ Temperature Ionic Liquids in Liquid–Liquid Extraction: Effects of Solubility in Aqueous Solutions on Surface Properties, Solvent Extr. Ion Exch., 24 (2006) 33-56. [7] M. Amde, Z.Q. Tan, R. Liu, J.F. Liu, Nanofluid of zinc oxide nanoparticles in ionic liquid for single drop liquid microextraction of fungicides in environmental waters prior to high performance liquid chromatographic analysis, J. Chromatogr. A, 1395 (2015) 715. [8] M.J. Trujillo-Rodríguez, P. Rocío-Bautista, V. Pino, A.M. Afonso, Ionic liquids in dispersive liquid-liquid microextraction, Trends Anal. Chem., 51 (2013) 87-106. [9] K.T. Prabhu Charan, N. Pothanagandhi, K. Vijayakrishna, A. Sivaramakrishna, D. Mecerreyes, B. Sreedhar, Poly(ionic liquids) as "smart" stabilizers for metal nanoparticles, Eur. Polym. J., 60 (2014) 114-122. [10] A.V. Bazhenov, T.N. Fursova, A.N. Turanov, A.S. Aronin, V.K. Karandashev, Properties of a composite material based on multi-walled carbon nanotubes and an ionic liquid, Phys. Solid State, 56 (2014) 572-579. [11] Y. Jiang, K. Zhang, H. Li, Y. He, X. Song, Spontaneous encapsulation behavior of ionic liquid into carbon nanotube, Nanoscale, 4 (2012) 7063-7069. [12] A. Peigney, C. Laurent, E. Flahaut, R.R. Bacsa, A. Rousset, Specific surface area of carbon nanotubes and bundles of carbon nanotubes, Carbon, 39 (2001) 507-514. [13] J. Feng, M. Sun, Y. Bu, C. Luo, Facile modification of multi-walled carbon nanotubes-polymeric ionic liquids-coated solid-phase microextraction fibers by on-fiber anion exchange, J. Chromatogr. A, 1393 (2015) 8-17. [14] X. Ding, Y. Wang, Q. Pan, J. Chen, Y. Huang, K. Xu, Preparation of magnetic chitosan and graphene oxide-functional guanidinium ionic liquid composite for the solid-phase extraction of protein, Anal. Chim. Acta, 861 (2015) 36-46. [15] B.-T. Zhang, X. Zheng, H.-F. Li, J.-M. Lin, Application of carbon-based nanomaterials in sample preparation: A review, Anal. Chim. Acta, 784 (2013) 1-17. [16] P. Montes-Navajas, N.G. Asenjo, R. Santamaría, R. Menéndez, A. Corma, H. García, Surface Area Measurement of Graphene Oxide in Aqueous Solutions, Langmuir, 29 (2013) 13443-13448. [17] Y. Zhu, S. Murali, W. Cai, X. Li, J.W. Suk, J.R. Potts, R.S. Ruoff, Graphene and Graphene Oxide: Synthesis, Properties, and Applications, Adv. Mater., 22 (2010) 39063924. [18] D. Mrabet, M.H. Zahedi-Niaki, T.-O. Do, Synthesis of Nanoporous Network Materials with High Surface Areas from the Cooperative Assemblage of Alkyl-ChainCapped Metal/Metal Oxide Nanoparticles, J. Phys. Chem. C, 112 (2008) 7124-7129. 23 ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT [19] H. Abdolmohammad-Zadeh, Z. Javan, Silica-coated Mn3O4 nanoparticles coated with an ionic liquid for use in solid phase extraction of silver(I) ions prior to their determination by AAS, Microchim. Acta, 182 (2015) 1447-1456. [20] Y. Xie, D. Kocaefe, Y. Kocaefe, J. Cheng, W. Liu, The Effect of Novel Synthetic Methods and Parameters Control on Morphology of Nano-alumina Particles, Nanoscale Res. Lett., 11 (2016) 259. [21] Q. Zhang, Y. Du, S. Du, Evaluation of ionic liquids-coated carbon nanotubes modified chiral separation system with chondroitin sulfate E as chiral selector in capillary electrophoresis, J. Chromatogr. A, 1339 (2014) 185-191. [22] Z. Es'haghi, A. Nezhadali, S. Bahar, S. Bohlooli, A. Banaei, [PMIM]Br@TiO2 nanocomposite reinforced hollow fiber solid/liquid phase microextraction: An effective extraction technique for measurement of benzodiazepines in hair, urine and wastewater samples combined with high-performance liquid chromatography, J. Chromatogr. B Analyt. Technol. Biomed. Life Sci., 980 (2015) 55-64. [23] M. Faraji, Recent analytical applications of magnetic nanoparticles, Nanochem. Res., 1 (2016) 264-290. [24] J. Dupont, J.D. Scholten, On the structural and surface properties of transitionmetal nanoparticles in ionic liquids, Chem. Soc. Rev., 39 (2010) 1780-1804. [25] H.-C. Chang, T.-C. Hung, S.-C. Chang, J.-C. Jiang, S.H. Lin, Interactions of Silica Nanoparticles and Ionic Liquids Probed by High Pressure Vibrational Spectroscopy, J. Phys. Chem. C, 115 (2011) 11962-11967. [26] M. Tunckol, J. Durand, P. Serp, Carbon nanomaterial-ionic liquid hybrids, Carbon, 50 (2012) 4303-4334. [27] K. Manojkumar, A. Sivaramakrishna, K. Vijayakrishna, A short review on stable metal nanoparticles using ionic liquids, supported ionic liquids, and poly(ionic liquids), J. Nanopart. Res., 18 (2016) 103. [28] S. Abe, A. Hyono, K. Nakayama, T. Takada, T. Yonezawa, Scanning electron microscope observation of nano carbon materials with imidazolium-type room temperature ionic liquids, Jpn. J. Appl. Phys, 52 (2013). [29] C. Ruiz-Palomero, M.L. Soriano, M. Valcárcel, Ternary composites of nanocellulose, carbonanotubes and ionic liquids as new extractants for direct immersion single drop microextraction, Talanta, 125 (2014) 72-77. [30] X. Cao, L. Shen, X. Ye, F. Zhang, J. Chen, W. Mo, Ultrasound-assisted magnetic solid-phase extraction based ionic liquid-coated Fe3O4@graphene for the determination of nitrobenzene compounds in environmental water samples, Analyst, 139 (2014) 19381944. [31] X. Liu, X. Lu, Y. Huang, C. Liu, S. Zhao, Fe3O4@ionic liquid@methyl orange nanoparticles as a novel nano-adsorbent for magnetic solid-phase extraction of polycyclic aromatic hydrocarbons in environmental water samples, Talanta, 119 (2014) 341-347. [32] M.L. Polo-Luque, B.M. Simonet, M. Valcárcel, Ionic liquid combined with carbon nanotubes: A soft material for the preconcentration of PAHs, Talanta, 104 (2013) 169172. [33] D. Xiao, D. Yuan, H. He, C. Pham-Huy, H. Dai, C. Wang, C. Zhang, Mixed hemimicelle solid-phase extraction based on magnetic carbon nanotubes and ionic liquids for the determination of flavonoids, Carbon, 72 (2014) 274-286. [34] J. Zhang, M. Li, Y. Li, Z. Li, F. Wang, Q. Li, W. Zhou, R. Lu, H. Gao, Application of ionic-liquid-supported magnetic dispersive solid-phase microextraction for the determination of acaricides in fruit juice samples, J. Sep. Sci., 36 (2013) 3249-3255. 24 ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT [35] J. Zou, X. Ma, Y. Dang, Y. Chen, Trace determination of cadmium(ii) and copper(ii) in environmental water samples by solid-phase extraction using a novel ionic liquid-modified composite sorbent combined with flame atomic absorption spectrometry, J. Anal. At. Spectrom., 29 (2014) 1692-1697. [36] A. Saljooqi, T. Shamspur, M. Mohamadi, A. Mostafavi, Application of a thioureacontaining task-specific ionic liquid for the solid-phase extraction cleanup of lead ions from red lipstick, pine leaves, and water samples, J. Sep. Sci., 37 (2014) 1856-1861. [37] J. Wu, H. Zhao, D. Xiao, P.-H. Chuong, J. He, H. He, Mixed hemimicelles solidphase extraction of cephalosporins in biological samples with ionic liquid-coated magnetic graphene oxide nanoparticles coupled with high-performance liquid chromatographic analysis, J. Chromatogr. A, 1454 (2016) 1-8. [38] E. Kazemi, A.M. Haji Shabani, S. Dadfarnia, A. Abbasi, M.R. Rashidian Vaziri, A. Behjat, Development of a novel mixed hemimicelles dispersive micro solid phase extraction using 1-hexadecyl-3-methylimidazolium bromide coated magnetic graphene for the separation and preconcentration of fluoxetine in different matrices before its determination by fiber optic linear array spectrophotometry and mode-mismatched thermal lens spectroscopy, Anal. Chim. Acta, 905 (2016) 85-92. [39] M. Wu, L. Wang, F. Zhao, B. Zeng, Ionic liquid polymer functionalized carbon nanotubes-coated polyaniline for the solid-phase microextraction of benzene derivatives, RSC Advances, 5 (2015) 99483-99490. [40] L. Xie, R. Jiang, F. Zhu, H. Liu, G. Ouyang, Application of functionalized magnetic nanoparticles in sample preparation, Anal. Bioanal. Chem., 406 (2014) 377399. [41] M.J. Park, J.K. Lee, B.S. Lee, Y.-W. Lee, I.S. Choi, S.-g. Lee, Covalent Modification of Multiwalled Carbon Nanotubes with Imidazolium-Based Ionic Liquids: Effect of Anions on Solubility, Chem. Mater., 18 (2006) 1546-1551. [42] Z. He, P. Alexandridis, Nanoparticles in ionic liquids: interactions and organization, PCCP, 17 (2015) 18238-18261. [43] A. Wittmar, D. Ruiz-Abad, M. Ulbricht, Dispersions of silica nanoparticles in ionic liquids investigated with advanced rheology, J. Nanopart. Res., 14 (2012) 651. [44] M. Luo, D. Liu, L. Zhao, J. Han, Y. Liang, P. Wang, Z. Zhou, A novel magnetic ionic liquid modified carbon nanotube for the simultaneous determination of aryloxyphenoxy-propionate herbicides and their metabolites in water, Anal. Chim. Acta, 852 (2014) 88-96. [45] H. Vatani, A.S. Yazdi, Ionic-liquid-mediated poly(dimethylsiloxane)-grafted carbon nanotube fiber prepared by the sol-gel technique for the head space solid-phase microextraction of methyl tert-butyl ether using GC, J. Sep. Sci., 37 (2014) 127-134. [46] J. Chen, X. Zhu, Ionic liquid coated magnetic core/shell Fe3O4SiO2 nanoparticles for the separation/analysis of linuron in food samples, Spectrochim. Acta A Mol. Biomol. Spectrosc., 137 (2015) 456-462. [47] L. Rodriguez-Perez, E. Teuma, A. Falqui, M. Gomez, P. Serp, Supported ionic liquid phase catalysis on functionalized carbon nanotubes, Chem. Commun., (2008) 4201-4203. [48] Y. Zhang, Y. Shen, D. Han, Z. Wang, J. Song, F. Li, L. Niu, Carbon nanotubes and glucose oxidase bionanocomposite bridged by ionic liquid-like unit: Preparation and electrochemical properties, Biosens. Bioelectron., 23 (2007) 438-443. [49] M.L. Polo-Luque, B.M. Simonet, M. Valcárcel, Solid-phase extraction of nitrophenols in water by using a combination of carbon nanotubes with an ionic liquid coupled in-line to CE, Electrophoresis, 34 (2013) 304-308. 25 ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT [50] L. Nyaba, J.M. Matong, K.M. Dimpe, P.N. Nomngongo, Speciation of inorganic selenium in environmental samples after suspended dispersive solid phase microextraction combined with inductively coupled plasma spectrometric determination, Talanta, 159 (2016) 174-180. [51] F. Zare, M. Ghaedi, A. Daneshfar, Application of an ionic-liquid combined with ultrasonic-assisted dispersion of gold nanoparticles for micro-solid phase extraction of unmetabolized pyridoxine and folic acid in biological fluids prior to high-performance liquid chromatography, RSC Advances, 5 (2015) 70064-70072. [52] M. Serrano, T. Chatzimitakos, M. Gallego, C.D. Stalikas, 1-Butyl-3-aminopropyl imidazolium-functionalized graphene oxide as a nanoadsorbent for the simultaneous extraction of steroids and β-blockers via dispersive solid-phase microextraction, J. Chromatogr. A, 1436 (2016) 9-18. [53] I. Ali, U. Kulsum, Z.A. Al-Othman, K. Saleem, Analyses of Nonsteroidal Antiinflammatory Drugs in Human Plasma Using Dispersive Nano Solid-Phase Extraction and High-Performance Liquid Chromatography, Chromatographia, 79 (2016) 145-157. [54] L. Farzin, M. Shamsipur, S. Sheibani, Solid phase extraction of hemin from serum of breast cancer patients using an ionic liquid coated Fe3O4/graphene oxide nanocomposite, and its quantitation by using FAAS, Microchim. Acta, 183 (2016) 2623-2631. [55] S. Chen, X. Qin, W. Gu, X. Zhu, Speciation analysis of Mn(II)/Mn(VII) using Fe3O4@ionic liquids-β-cyclodextrin polymer magnetic solid phase extraction coupled with ICP-OES, Talanta, 161 (2016) 325-332. [56] Q. Wen, Y. Wang, K. Xu, N. Li, H. Zhang, Q. Yang, Y. Zhou, Magnetic solidphase extraction of protein by ionic liquid-coated Fe@graphene oxide, Talanta, 160 (2016) 481-488. [57] Q. Wen, Y. Wang, K. Xu, N. Li, H. Zhang, Q. Yang, A novel polymeric ionic liquid-coated magnetic multiwalled carbon nanotubes for the solid-phase extraction of Cu, Zn-superoxide dismutase, Anal. Chim. Acta, 939 (2016) 54-63. [58] B. Wang, X. Wang, J. Wang, X. Xue, X. Xi, Q. Chu, G. Dong, Y. Wei, Amino acid-based ionic liquid surface modification of magnetic nanoparticles for the magnetic solid-phase extraction of heme proteins, RSC Advances, 6 (2016) 105550-105557. [59] M. Karimi, A.M.H. Shabani, S. Dadfarnia, Magnetic nanoparticles coated with ionic liquid as a sorbent for solid phase extraction of chromium(VI) prior to its determination by electrothermal atomic absorption spectrometry, J. Brazil. Chem. Soc., 27 (2016) 144-152. [60] Y. Huang, Y. Wang, Y. Wang, Q. Pan, X. Ding, K. Xu, N. Li, Q. Wen, Ionic liquid-coated Fe3O4/APTES/graphene oxide nanocomposites: Synthesis, characterization and evaluation in protein extraction processes, RSC Advances, 6 (2016) 5718-5728. [61] E. Aliyari, M. Alvand, F. Shemirani, Modified surface-active ionic liquid-coated magnetic graphene oxide as a new magnetic solid phase extraction sorbent for preconcentration of trace nickel, RSC Advances, 6 (2016) 64193-64202. [62] X. Guo, H. Wu, S. Guo, Y. Shi, J. Du, P. Zhu, L. Du, Highly sensitive fluorescence methods for the determination of alfuzosin, doxazosin, terazosin and prazosin in pharmaceutical formulations, plasma and urine, Anal. Sci., 32 (2016) 763-768. [63] M.J. Trujillo-Rodríguez, V. Pino, J.L. Anderson, J.H. Ayala, A.M. Afonso, Double salts of ionic-liquid-based surfactants in microextraction: Application of their mixed hemimicelles as novel sorbents in magnetic-assisted micro-dispersive solid-phase extraction for the determination of phenols, Anal. Bioanal. Chem., 407 (2015) 87538764. 26 ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT [64] A. Mehdinia, S. Shegefti, F. Shemirani, A novel nanomagnetic task specific ionic liquid as a selective sorbent for the trace determination of cadmium in water and fruit samples, Talanta, 144 (2015) 1266-1272. [65] M. Bayat, F. Shemirani, M. Hossein Beyki, M. Davudabadi Farahani, Ionic liquidmodified Fe3O4 nanoparticle combined with central composite design for rapid preconcentration and determination of palladium ions, Desalin. Water Treat., 56 (2015) 814-825. [66] X. Zheng, L. He, Y. Duan, X. Jiang, G. Xiang, W. Zhao, S. Zhang, Poly(ionic liquid) immobilized magnetic nanoparticles as new adsorbent for extraction and enrichment of organophosphorus pesticides from tea drinks, J. Chromatogr. A, 1358 (2014) 39-45. [67] C. Cui, B. Hu, B. Chen, M. He, Ionic liquid-based magnetic solid phase extraction coupled with inductively coupled plasma-optical emission spectrometry for the determination of Cu, Cd, and Zn in biological samples, J. Anal. At. Spectrom., 28 (2013) 1110-1117. [68] F. Galán-Cano, M. del Carmen Alcudia-León, R. Lucena, S. Cárdenas, M. Valcárcel, Ionic liquid coated magnetic nanoparticles for the gas chromatography/mass spectrometric determination of polycyclic aromatic hydrocarbons in waters, J. Chromatogr. A, 1300 (2013) 134-140. [69] R. Zhang, P. Su, L. Yang, Y. Yang, Microwave-assisted preparation of poly(ionic liquids)-modified magnetic nanoparticles for pesticide extraction, J. Sep. Sci., 37 (2014) 1503-1510. [70] M. Amiri, YadollahYamini, M. Safari, H. Asiabi, Magnetite nanoparticles coated with covalently immobilized ionic liquids as a sorbent for extraction of non-steroidal anti-inflammatory drugs from biological fluids, Microchim. Acta, 183 (2016) 22972305. [71] M.-Q. Cai, J. Su, J.-Q. Hu, Q. Wang, C.-Y. Dong, S.-D. Pan, M.-C. Jin, Planar graphene oxide-based magnetic ionic liquid nanomaterial for extraction of chlorophenols from environmental water samples coupled with liquid chromatography– tandem mass spectrometry, J. Chromatogr. A, 1459 (2016) 38-46. [72] F. Chen, Z. Song, J. Nie, G. Yu, Z. Li, M. Lee, Ionic liquid-based carbon nanotube coated magnetic nanoparticles as adsorbent for the magnetic solid phase extraction of triazole fungicides from environmental water, RSC Advances, 6 (2016) 81877-81885. [73] F.A. Casado-Carmona, M.d.C. Alcudia-León, R. Lucena, S. Cárdenas, M. Valcárcel, Magnetic nanoparticles coated with ionic liquid for the extraction of endocrine disrupting compounds from waters, Microchem. J., 128 (2016) 347-353. [74] J. Chen, X. Zhu, Magnetic solid phase extraction using ionic liquid-coated coreshell magnetic nanoparticles followed by high-performance liquid chromatography for determination of Rhodamine B in food samples, Food Chem., 200 (2016) 10-15. [75] Y. Chen, S. Cao, L. Zhang, C. Xi, X. Li, Z. Chen, G. Wang, Preparation of sizecontrolled magnetite nanoparticles with a graphene and polymeric ionic liquid coating for the quick, easy, cheap, effective, rugged and safe extraction of preservatives from vegetables, J. Chromatogr. A, 1448 (2016) 9-19. [76] Y. Shi, H. Wu, C. Wang, X. Guo, J. Du, L. Du, Determination of polycyclic aromatic hydrocarbons in coffee and tea samples by magnetic solid-phase extraction coupled with HPLC-FLD, Food Chem., 199 (2016) 75-80. [77] S. Chen, J. Chen, X. Zhu, Solid phase extraction of bisphenol A using magnetic core-shell (Fe3O4@SiO2) nanoparticles coated with an ionic liquid, and its quantitation by HPLC, Microchim. Acta, 183 (2016) 1315-1321. 27 ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT [78] F. Latifeh, Y. Yamini, S. Seidi, Ionic liquid-modified silica-coated magnetic nanoparticles: promising adsorbents for ultra-fast extraction of paraquat from aqueous solution, Environ. Sci. Pollut. R., 23 (2016) 4411-4421. [79] S. Bakhshaei, M.A. Kamboh, H.R. Nodeh, S. Md Zain, S.K. Mahmad Rozi, S. Mohamad, I.A. Mohammed Mohialdeen, Magnetic solid phase extraction of polycyclic aromatic hydrocarbons and chlorophenols based on cyano-ionic liquid functionalized magnetic nanoparticles and their determination by HPLC-DAD, RSC Advances, 6 (2016) 77047-77058. [80] H. Bagheri, Y. Yamini, M. Safari, H. Asiabi, M. Karimi, A. Heydari, Simultaneous determination of pyrethroids residues in fruit and vegetable samples via supercritical fluid extraction coupled with magnetic solid phase extraction followed by HPLC-UV, J. Supercrit. Fluids, 107 (2016) 571-580. [81] L. Yang, P. Su, X. Chen, R. Zhang, Y. Yang, Microwave-assisted synthesis of poly(ionic liquid)-coated magnetic nanoparticles for the extraction of sulfonylurea herbicides from soil for HPLC, Anal. Methods, 7 (2015) 3246-3252. [82] G. Liu, P. Su, L. Yang, Y. Yang, Preparation of novel ionic-liquid-modified magnetic nanoparticles by a microwave-assisted method for sulfonylurea herbicides extraction, J. Sep. Sci., 38 (2015) 3936-3944. [83] A. Farnoudian-Habibi, S. Kangari, B. Massoumi, M. Jaymand, Determination of losartan potassium in the presence of hydrochlorothiazide via a combination of magnetic solid phase extraction and fluorometry techniques in urine samples, RSC Advances, 5 (2015) 102895-102903. [84] C. Zhang, J.L. Anderson, Polymeric ionic liquid bucky gels as sorbent coatings for solid-phase microextraction, J. Chromatogr. A, 1344 (2014) 15-22. [85] J. Feng, M. Sun, L. Li, X. Wang, H. Duan, C. Luo, Multiwalled carbon nanotubesdoped polymeric ionic liquids coating for multiple headspace solid-phase microextraction, Talanta, 123 (2014) 18-24. [86] M.J. Trujillo-Rodríguez, H. Yu, W.T.S. Cole, T.D. Ho, V. Pino, J.L. Anderson, A.M. Afonso, Polymeric ionic liquid coatings versus commercial solid-phase microextraction coatings for the determination of volatile compounds in cheeses, Talanta, 121 (2014) 153-162. [87] J. Chen, Y. Wang, X. Ding, Y. Huang, K. Xu, Magnetic solid-phase extraction of proteins based on hydroxy functional ionic liquid-modified magnetic nanoparticles, Anal. Methods, 6 (2014) 8358-8367. [88] H. Vatani, A. Sarafraz Yazdi, Preparation of an ionic liquid-mediated carbon nanotube- poly(dimethylsiloxane) fiber by sol-gel technique for determination of polycyclic aromatic hydrocarbons in urine samples using head-space solid-phase microextraction coupled with gas chromatography, J. Iran. Chem. Soc., 11 (2014) 969977. [89] M.M. Abolghasemi, B. Karimi, V. Yousefi, H. Behzadnia, H. Barzegar, M. Piryaei, Ionic liquid-derived nano-fibrillated mesoporous carbon based on solid-phase microextraction fiber for the analysis of volatile organic compounds from aqueous solutions, New J. Chem., 39 (2015) 6085-6091. [90] A. Farnoudian-Habibi, B. Massoumi, M. Jaymand, A novel strategy for spectrophotometric simultaneous determination of amitriptyline and nortriptyline based on derivation with a quinonoid compound in serum samples, Spectrochim. Acta A Mol. Biomol. Spectrosc., 168 (2016) 235-243. 28 ACCEPTED MANUSCRIPT Fig. 1 Number of articles published in the period 2000–2016 reporting a) the use of ionic liquids (ILs) ( ) and nanomaterials ( ) in extraction methods; b) the use of ILsnanomaterial hybrids in extraction methods ( ). Data generated from a search performed in Scopus database (http://www.scopus.com) using as search filters the terms: a) “ionic liquid” and extraction; nano and extraction; b) “ionic liquid” and nano RI PT and extraction. Fig. 2 Selected physicochemical properties for extraction and preconcentration of ILs M AN US C ( ), nanomaterials ( ) and IL-nanomaterial hybrids ( ). Fig. 3 Schematics of a general procedure used for the preparation of IL-coated NPs. Fig. 4 Schematics of possible routes for chemical functionalization of CNTs with imidazolium-type ILs. a) via reaction with an imidazole derivative [47] and b) grafting AC C EP TE D of amine or hydroxyl terminated ILs [48]. 29 ACCEPTED MANUSCRIPT Table 1 Comparison of the analytical performance of IL-coated nanomaterials-based methods for preconcentration IL Nanomaterial IL-Nanomaterial Interaction Extraction technique Analyte [C6mim][NTf2] S-BaFe Physical adsorption D-M-SPE [C6mim][PF6] MWNTs Physical-coating in IL-mediated sol–gel dispersion formation [C7mim][PF6] Fe3O 4@graphene [C18mim]Br Fe3O4@IL@MO EF Sample Ref. Acaricides HPLC-UVVWD 0.05-0.53 ng/mL N.R Fruit juice [34] SPE PAHs FES N.R N.R River water [32] M-SPE NBs HPLC-PDA 1,35-4,57g/L N.R Environmental water [30] HPLC–FES 0.1-2 ng/L 1501000 River water [31] [36] M-SPE 1-(3-Aminopropyl) imidazole ILs MWCNTs [C16mim]Br MWCNTs@SiO2 IL adsorption as hemimicelles M-SPE Cationic functionalized hexaalkylguanidinium ILs and anionic functionalized tetraalkylguanidinium ILs MCGO Coating-functionalization M-SPE poly[VOIm]Br MWCNTs Physical adsorption Aliquat-336 Al2O3 Physical adsorption [C5mim]Br TiO2 Physical adsorption [C16mim]Br Fe3O4/GO Mixed hemimicelles [C16mim]Br Fe3O4/GO [C10C10mim]Cl Fe3O4/GO D SPE SC RI PT LOD M AN U Self-aggregating IL onto the surface of the Fe3O4-grafted graphene Electrostatic and hydrophobic interactions Thiourea-IL is immobilized on the solid sorbent, MWCNTs. Detector PAHs Pb ETAAS 0.13 ng/mL - Red lipstick, pine leaves, and water Flavonoids HPLC-UV-Vis 0.2-0.75 ng/mL N.R Human urine [33] Protein UV-Vis N.R N.R Aqueous protein solution [14] GC-FID 0.005-0.05 g/mL N.R Groundwater [13] 850 533 1190 N.R. Surface water Hair, urine and wastewater Human urine Human urine, environmental water and pharmaceutical formulations Serum of breast cancer patients [50] Natural waters [55] Porcine and bovine [56] ICP-OES 4.6 ng/L HF-SLPME Benzodiazepines HPLC-UV-Vis 0.08-0.5 ng/mL M-SPE Cephalosporines 0.6-1.9 ng/mL Mixed hemimicelles M-SPE Fluoextine HPLC-UV-Vis Modemismatched thermal lens spectroscopy Mixed hemimicelles M-SPE Hemin TE Hydrophilic and hydrogen-bondingdonating alcohols Inorganic Se SPME AC C EP D-SPE FAAS (Fe) 1,2-dimethylimidazole Fe3O4@ILs-βCDCP Β-ciclodextrins are functionalized with ILs who acts as a coating for Fe3O4 nanoparticles M-SPE Mn(II) and Mn(VII) ICP-OES AFDCIL Fe@GO@IL Fe nanoparticles were covered by M-SPE Bovine Hemoglobine UV-Vis 30 0.21 3 g/L g/L Mn(II): 0.15 g/L Mn(VII): 0.27 g/L 11.87 g/mL 167 96 Mn(II): 50 Mn(VI I): 25 N.R [22] [37] [38] [54] ACCEPTED MANUSCRIPT protein [1-(3- aminopropyl)-3(4-vinylbenzyl) imidazolium] chloride 1-ethyl-3-methylimidazolium l-proline (EMIMLpro) blood PIL coated the magnetic MWCNTs nanomaterial M-SPE Cu,Zn-superoxide dismutase Fe3O4@DIH-EMIMLpro Physical adsorption M-SPE Hemoglobine [C16mim]Br Fe3O4@IL Physical adsorption M-SPE Cr(III), Cr(VI) Betaine based IL Fe3O4@APTES @GO@IL Physical adsorption M-SPE Bovine serum albumin (BSA) [C16mim]Cl Fe3O4@GO @DMG@IL Physical adsorption M-SPE Ni(II) M-SPE Fe3O4@IL Mixed hemimicelles M-µ-DSPE Fe3O4@A336@I L Physical adsorption [C6mim][NTf2] Au NPs@[C6mim] Physical adsorption [C6mim][PF6] Fe3O4@IL Physical adsorption N.R Blood [57] UV-Vis N.R N.R Blood [58] ETAAS 0.003 g/L Cr(VI) 112 Natural waters [59] UV-Vis FAAS FES N.R 0.16 g/L 0.027-0.035 g/L N.R 100 108.5114.5 Bovine calf whole blood Sea water, river water, tea, cocoa powder, cigarette, spinach Pharmaceutical Formulations, plasma and urine [60] [61] [62] HPLC-DAD 1.3 g/L 15.7141 Water samples [63] M-SPE Cd(II) FAAS 0.5 g/L 50 Water and fruit samples [64] µ-SPE Pyridoxine and folic acid HPLC-UV 130 and 98 Biological fluids [51] M-SPE Pd(II) FAAS 150 Water samples [65] D Phenols EP [C12C12im]Br + [C16mim]Br Tricaprylmethyl ammonium thiosalicylate M AN U Polimeric IL coating on Fe3O4 N.R TE Fe3O4@IL Alfuzosin, Doxazosin, Terazosin and Prazosin AC C [Vmim]I UV-Vis SC mMWCNTs@PIL RI PT GO and then, the composite was modified by the IL 31 3.4 – 4.8 ng/mL 0.82 g/L ACCEPTED MANUSCRIPT COOH- [TMG][CH2COOH] CH2COOH- M AN U SC [TMG][COOH] RI PT Table 2 Chemical structures of novel ILs used in different preconcentration methods based on IL-coated nanomaterial hybrids. IL CATION ANION [14] [14] (CH2)2COOH- [14] CH2CH(OH)COOH- [14] Cl- [14] Cl- [14] TE D [TMG][(CH2)2COOH] Ref. [diHOHTMG]Cl AC C [diBOHTMG]Cl EP [TMG][CH2CH(OH)COOH] 32 Br- Thiourea functionalized imidazolium cation with bis(trifluoromethylsulfonyl)imide anion Tf2N- AC C EP TE D M AN U SC Poly-(1-vynil-3-octilimidazolium) bromide RI PT ACCEPTED MANUSCRIPT 33 [13] [36] ACCEPTED MANUSCRIPT Table 3 Comparison of the analytical performance of preconcentration methods based on chemically functionalized IL-nanomaterial hybrids IL Nanomaterial Extraction technique Analyte Detector SPE Ag [Simam]Cl SiO2@Fe3O4 M-SPE [VHim]Br Fe3O4@SiO2 M-SPE Bovine serum albumin Organophosphorous pesticides (parathion, fenthion, phoxim and temephos) Fe3O4@Si–OH M-SPE Cu, Zn, Cd [C8mim]PF6 TiO2 SPE Cd, Cu [C4mim]Br Fe3O4@SiO2 Aryloxyphenoxy-propionate herbicides and their metabolites D-M-SPE M-SPE PAHs FAAS 0.2 ng/mL 50 UV-Vis N.R HPLC-UV-Vis 0.01 g/L 84-161 Tea drinks [66] ICP-OES 0.54 (Cu), 0.56 (Zn), and 0.33 µg /L (Cd) 10 Human hair and urine [67] FAAS 0.1 and 0.3 µg/L N.R. River, lake, pond and well water [35] Ground and reservoir water [44] HPLC-DAD UHPLCMS/MS GC/MS D [mim][PF6] MWCNTs Fe3O4 M AN U [MTOA]Cl Ref. N.R Sample Water and radiology films Aqueous standards RI PT Mn3O4@SiO2 EF SC [MTMSPIm]Cl LOD [19] [87] 2.8-14.3 µg/L-1 (HPLC– DAD) 0.04 µg/L (fluoranthene ) to 1.11 µg/L (indeno(1,2,3 -cd)pyrene) 49 (naphthal ene) to 158 (fluorant hene) Tap, river, well and reservoir water [68] [46] N.R UV-Vis 5.0 ng/mL 10 Water, fruits, and vegetables 2-Naphthol GC 0.15 ng N.R Fruit samples (pomelo and orange) [85] PAHs GC 0.0005-0.004 ng/mL N.R Urine [88] HS-SDME Methyl tert-butyl ether GC 0.007 ng/mL N.R Water [45] SPME PAHs GC/MS 1-2.5 ng/L N.R River and tap water [84] Fe3O4@SiO2 d-SPE Pesticides HPLC-UV LDHs of Zn(II) and Cr(III) SPME Phenolic compounds GC-MS Fruit and vegetable samples Environmental [69] [89] M-SPE poly[VOIm][PF6] MWCNTs Multiple headspace SPME [C6mim][PF6] MWCNT –poly(dimethylsiloxane) hybrid coating HS-SPME [C6mim][PF6] MWCNT –poly(dimethylsiloxane) hybrid coating PILs MWCNT PILs DABCO AC C EP Fe3O4@SiO2 TE Linuron [C8mim][PF6] 34 0.29-0.88 g/L 0.02 - 6.3 N.R N.R ACCEPTED MANUSCRIPT pg/mL water Fe3O4@SiO2 M-SPE Non-steroidal anti-inflammatory drugs HPLC-UV-Vis 0.2-0.3 mg/ kg. N.R [cmmim]Cl Fe3O4@SiO2@GO M-SPE Chlorophenols HPLC-MS/MS 0.2-2.6 ng/L N.R 7-23 ng/L 41374843 Environmental water Wastewater and natural water 125-1242 Canal water 1-Butyl-3-aminopropyl imidazolium chloride 1-(3-Aminopropyl)-3butylimidazolium chloride GO RI PT Dimethyl octadecy[3(trimethoxysilyl propyl)]ammonium chloride Steroids and β-blockers D-SPE HPLC-DAD M-SPE Six triazole fungicides Imidazolium Fe3O4@SiO2 M-SPE Amitriptyline and nortriptyline [mim][PF6] Fe3O4@SiO2 M-SPE Endocrine disrupting chemicals HPLC-MS/MS [C8mim][PF6] Fe3O4@SiO2 M-SPE Rhodamine B Preservatives for vegetables (benzoates, azols among others) HPLC-UV Fe3O4@SiO2@G M-SPE GC-MS NR Vegetables [75] PAHs HPLC-FLD 1-10 ng/L 106.3128.3 Coffee and tea [76] Bisphenol A Paraquat Nonsteroidal antiinflammatory drugs HPLC-UV HPLC-UV 25 103 Plastic tableware Soil and water [77] [78] N.R Human Plasma [53] PAHs and chlorophenols HPLC-DAD 90 ng/L 0.1 g/L 1.5-5.8 g/mL 0.4-0.59 0.35-0.67 g/L 200 100 Leachate and sludge from landfill site [79] 119-137 Fruit and vegetable samples [80] N.R Soil [81] N.R Tea samples [82] N.R Urine samples [83] [C4mim]Br Fe D-SPE Fe3O4@CN M-SPE Fe3O4@SiO2 M-SPE 1-vinylimidazole Fe3O4@SiO2 M-SPE Sulfonylurea herbicides HPLC-UV 1-vinylimidazole Fe3O4@SiO2 M-SPE Sulfonylurea herbicides HPLC-UV M-SPE Lossartan potassium EFS Fe3O4@SiO2 D TE EP AC C Imidazole [72] 25 [C8mim][PF6] N-methylimidazole 1-benzyl-3(trimethoxysilylpropyl) imidazolium chloride dimethyl octadecyl [3(trimethoxysilyl) propyl] ammonium chloride [52] g/L M-SPE M-SPE M-SPE [71] 0.82-6.64 g/Kg UV-Vis Fe3O4@3(Trimethoxysilyl)propyl methacrylate Fe3O4@SiO2 Fe3O4@SiO2 [Vmim]I [70] Antidepressants drugs River, Sea and Swimming pool water Food samples M AN U [VC8im]I, 1-Vinyl-3octylimidazolium bromide GC-MS SC Fe3O4@MWCNT 0.05-0.22 ng/mL 0.12-0.62 g/L Human blood HPLC-UV 0.16-1.21 g/L 0.08 N.R 15.4-49.2 Pyrethroids residues HPLC-UV 35 1.0 g/L 1.62-2.94 g/L 0.13-0.81 g/L 0.12 g/L [90] [73] [74] ACCEPTED MANUSCRIPT Fig. 1 a) 600 500 RI PT Number of publications 700 400 300 200 M AN US C 100 0 Year D TE EP 20 18 16 14 12 10 8 6 4 2 0 AC C Number of publications b) Year ACCEPTED MANUSCRIPT EP TE D M AN US C RI PT Fig. 2 AC C • Easy regeneration • High extraction capacity • Less solvent consumption • High reproducibility • High chemical stability • Negligible vapor pressure • Tunable composition • Polar character • Low toxicity • High thermal stability • Novel magnetic and optical properties ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT Fig. 3 ACCEPTED MANUSCRIPT Fig. 4 M AN US C RI PT a) AC C EP TE D b) ACCEPTED MANUSCRIPT AC C EP TE D M AN US C RI PT Highlights >Interaction of ionic liquids with nanomaterials surface. >Latest advances on solid phase extraction with ionic liquid-nanomaterial hybrids. >Improved sorption performance by combining ionic liquids and nanomaterials. >Novel analytical developments on preconcentration are discussed.