Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo

Read Reviews
Write a Review
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Back Order Now
You may back order this item and it will ship when it arrives.
$2.99 flat rate shipping! Learn More
Price: $99.99

Please Log in to receive a notification when this item arrives in stock.

Save In List
This item earns up to 100 VIP Reward Points Learn More
Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.

Features:

  • G2 Digital Circuit
  • Coreless Motor
  • Dual Ball Bearing Supported Output Shaft
  • Titanium Gear Train (MK first gear)
  • *** Programmable Features Include: ***
  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point
  • Resolution* (default is high resolution)
  • Overload Protection* (default is off)
  • *these features are only programable with the HFP-20 field programmer (#44430)
Specifications:
  • Speed:
    • 4.8V: 0.19 sec/60 deg.
    • 6.0V: 0.15 sec/60 deg.
  • Torque:
    • 4.8V: 250 oz/in
    • 6.0V: 333 oz/in
  • Length: 1.57in (39.87mm)
  • Width: 0.78in (19.81mm)
  • Height: 1.45in (36.83mm)
  • Weight: 2.29oz (65g)
Limited Warranty:
Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product.

This product was added to our catalog on June 17, 2008

Sean Norbury
Verified Owner
Friday, Feb 28 2014 (about 10 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I have ran several manufactures of servo's, JR9100's, 9100t, 8711, airtronics, savox, ace 1015's, Several hitec's & a couple manufactures I can't think of off the top of my head. I use these servo's in 1/8 nitro buggy & truggy only. I am not a basher, I run tracks only & take very good care of my equipment. I currently own 3 buggies & 3 truggies. Here is my experience, I currently have 6 JR SERVO'S in a box that have failed me, most of them when I'M 4 hrs from home at a race with very little run time. I went through 4 Ace servo's & 6 gear rebuilds before I was so frustrated I changed brands. Airtronics has been a fairly reliable brand servo & Infact I still run a Airtronics M11x transmitter & absolutely love it. The Savox has been an excellent Servo & I have only had 1 fail, they do however make alot of noise. I have tried all kinds of adjustments to keep them from humming with no solutions (however they have treated me well). For the most part I have been running Hitec servo's for the last 2 1/2 years, specifically the 7955 & 7950. These are the most reliable servo I have ever used. I am only sponsored by my own wallet. In my experience if you are looking for reliability*, torque & speed these are the best on the market
Carl Madsen
Friday, Feb 20 2009 (about 15 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I'm using this for steering in my 1/8 losi 8ight and it is a BEAST! Reaction is super quick, no lag or "dead spots" under heavy steering. Ive had servos before on rough tracks act like they were getting beat around, this servo has zero flaws and will not be distorted no matter how hard you crash or how hard your pushing your car.
Vince
Tuesday, Mar 4 2014 (about 10 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
This is probably my favorite servo of all time. Just about as bullet proof as you can get. If you are thinking of running 8th scale, then this servo should be top of your list. I have 4 of them and in 5 years I have only had to replace one case. That was from a used one and it's possible that it was partially cracked when I bought it. That is the extent of problems I have had with this brand of servo. It's got more torque then you will ever need and it's got plenty of speed for 8th scale racing. It's not a HV (High Voltage) servo so it wont demand extra power from your RX. You wont have to worry about having a less than adequate BEC, in most cases. There are only a few "negatives" to consider with this model. The mounting tabs could be considered a weak point, so make sure you use the included rubber grommets. Still, it would take some major hard hits or improper mounting to hurt this thing. It's not considered a super high speed servo, but you really don't need that for 8th scale, so it hardly matters. The servo gasket might be inadequate if you are running in wet/snow conditions. That is about all I can think of that would be considered negative. I should also point out that Hitec is a great company to deal with. Great support.
Billy Easton
Tuesday, Feb 5 2013 (about 11 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I was turned onto the servos from a friend. At the time, I was having failure after failure when i was using another brand. Although i wanted to stay loyal to them, finishing races was more important. This servo for the money is by far one of the absolute best. You not only get power,reliability but also speed for under $120.00. I think this is the most durable servo I have used in the last 10 years.
Anonymous
Verified Owner
Tuesday, Apr 13 2010 (about 14 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Absolutely amazing servos! Toughest, best performing servos on the market! I wouldn't run any other brand servo in my race rigs. If you want the best of the best, forget the rest! Hitec is the best!

The titanium gears are phenomenal! The motors are top notch and the new G2 circuitry is even better! These servos are also known to handle 7.4v 2s lipo power. The new HV stuff is absolutely fantastic as well!!
Anonymous
Thursday, Mar 24 2011 (about 13 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
This is the greatest servo on the market! I hope hitec uses the components from this servo for years to come.
Marvin Bellomy
Wednesday, Mar 24 2010 (about 14 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I have this servo for my steering on my Matrix TR (soon to be on a ST-RR :) very dependable and durable. Was at a race and got crossed up with another guy through a wide open swiping corner and the truggy went up on 2 wheels and as i corrected i got ran over and pushed off the track (mind you i was still on the throttle last corner for 2nd place) slammed into a post with the front right corner. The impact ripped the entire front corner off and this was the first race with the HS-7955TG servo and i was like ah no hope the servo is ok. to my surprise the servo was still working and the impact pulled the servo so hard it bent an aluminum servo horn. So in short if the servo can bend a aluminum horn and still work fine. ill definitely buy another one when this one goes out.
Anonymous
Saturday, Aug 1 2009 (about 15 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Best Servo on the Market, because it is backed by Hitec's superb customer service. No other company can compete with the quality of this servo and it's support. It can also run 2 cell lipo unregulated.
Feral Cat
Verified Owner
Monday, Sep 21 2020 (about 4 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I installed this servo in a Kyosho Javelin re-re. 17.5T HW motor and ESC. Space is tight inside a Javelin, so I originally used the Kyosho servo arm that came in the kit. Also, with Kyosho, the nice thing is that the directions are clear and detailed and if you follow them to the letter, everything fits and aligns up perfectly.

The Good: the servo performs exactly as advertised. Fast, robustly built and powerful, and it doesn't require high voltage.

The Bad: the servo performs exactly as advertised. Fast and powerful, and so fast and powerful that it keeps breaking parts in my steering linkage. Eventually the servo arm was stripped. At least the titanium gears have held up.

The Fix: I replaced the factory servo arm with a metal unit. We'll see how it holds, or that just means that I start breaking other parts.

TL:DR: this servo is probably overkill in my application, the equivalent of killing flies with a howitzer.
Horace Adomako
Monday, Aug 8 2016 (about 8 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
i use this as a throttle servo on my savage SS truck and MAAANN, I have to be gentle on the breaks because if I go too hard the truck flips over, that's how powerful this servo is!! I will most definitely by it again!!
Anonymous
Verified Owner
Friday, Oct 17 2014 (about 10 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
so far so good, got this in my hpi vorza with cc bec to keep it good and strong at six volts.
rich niccum
Wednesday, Oct 8 2014 (about 10 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Best servo that I have ever used! Running straight off lipo with no issues. I bought a back-up, just in case. It's been sitting in my Roller for 2 years..
Anonymous
Friday, Oct 11 2013 (about 11 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I got two of these in a used buggy I purchased and I am loving these servo's. The gears don't get sloppy like some other top brand servo's.
Anonymous
Thursday, Oct 10 2013 (about 11 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Love these servos got one in the steering and throttle on my d8 raced and driven hard and wrecked hard they are 5 years old never one problem still racing with them.
David W
Saturday, Mar 10 2012 (about 12 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
A little update. Have been running this same servo in my Rc8.2e for over a year now. Had to take it apart once because it sounded like it had a skip in it. Ended up finding that it had a chipped tooth on the carbon gear. Was a easy and cheap fix. Now I am also running the same servo in my Losi Eight TE with no issues.
Anonymous
Tuesday, Feb 26 2013 (about 11 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
i have 2 of these servos one in my ten scte and one in my tlr 22 sct
both truck steer excellent i have had some big tangles and never even came close to breaking got pushed into wall a servos gear are so strong that instead of breaking it stripped the plastic insert great product
great price cant go wrong if you want problem free servo that finnishes races here it is
Anonymous
Verified Owner
Wednesday, Jun 8 2011 (about 13 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
no money to waste, no time to waste, if you want the best this is the best you can get!
Ariel Lindsley
Thursday, Jan 21 2021 (about 3 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Love this servo for crawlers. I use it with the castle BEC and aluminum clamping servo horn. Huge improvement over stock. Great performance and durability.
Dustin Elin
Verified Owner
Tuesday, Dec 11 2018 (about 5 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
Used for a season with no issues in my NT48.3. Recommended.
Jeremy Figueora
Friday, Sep 1 2017 (about 7 years ago)
Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
I own 3 of these servos. They are great servos, very durable, and respond very well in all of the cars I own/owned to include a nitro TLR 8ight 3.0 buggy, Mugen MTX4 on road car and my new ARC R11 2017 electric on road car. Ive had one have the board burn out but Hitec has repaired it with no question and refurbished it. Works like new. Great Servo for any 1/10 or 1/8 scale application. And its a HV servo.