Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Discover millions of ebooks, audiobooks, and so much more with a free trial

From $11.99/month after trial. Cancel anytime.

Preventive Maintenance, Third Edition
Preventive Maintenance, Third Edition
Preventive Maintenance, Third Edition
Ebook285 pages2 hours

Preventive Maintenance, Third Edition

Rating: 5 out of 5 stars

5/5

()

Read preview

About this ebook

This third edition of a best-selling classic shows how the investment in a preventive maintenance program repays a company in longer equipment life, smoother operation, planning, and scheduling. It includes information on computerized PM systems, enhanced techniques, and insights into preventive maintenance. The latest technology has improved equipment quality, reliability and dependability by fault-tolerance, redundant components, self-adjustments, and replacement of hydraulic and mechanical components by more reliable electronic and optical operations. Many components, however, still wear out, corrode, become punctured, vibrate excessively, become overheated by friction or dirt, or can even be damaged by humans. Fortunately, modern sensors and computers for condition monitoring and detection enable equipment to "call home" to report they need PM before they fail. The preventive maintenance advantage is that you will pay less now to do planned work when production is not pushing versus very expensive emergency repairs that may be required under disruptive conditions causing production to halt and loss of revenue. Good PM saves money over a product’s life cycle. The book addresses major types of maintenance; advantages and disadvantages of PM; designing a PM program; economics of PM; nondestructive testing; scheduling; metrics; data issues; and much more. - See more at: https://www.isa.org/store/products/product-detail/?productId=116165#sthash.KmAbLW8z.dpuf
LanguageEnglish
Release dateFeb 15, 2016
ISBN9781941546147
Preventive Maintenance, Third Edition

Related to Preventive Maintenance, Third Edition

Related ebooks

Technology & Engineering For You

View More

Related articles

Related categories

Reviews for Preventive Maintenance, Third Edition

Rating: 5 out of 5 stars
5/5

1 rating0 reviews

What did you think?

Tap to rate

Review must be at least 10 words

    Book preview

    Preventive Maintenance, Third Edition - J.D. Patton, Jr.

    Notice

    The information presented in this publication is for the general education of the reader. Because neither the author nor the publisher have any control over the use of the information by the reader, both the author and the publisher disclaim any and all liability of any kind arising out of such use. The reader is expected to exercise sound professional judgment in using any of the information presented in a particular application.

    Additionally, neither the author nor the publisher have investigated or considered the affect of any patents on the ability of the reader to use any of the information in a particular application. The reader is responsible for reviewing any possible patents that may affect any particular use of the information presented.

    Any references to commercial products in the work are cited as examples only. Neither the author nor the publisher endorse any referenced commercial product. Any trademarks or tradenames referenced belong to the respective owner of the mark or name. Neither the author nor the publisher make any representation regarding the availability of any referenced commercial product at any time. The manufacturer’s instructions on use of any commercial product must be followed at all times, even if in conflict with the information in this publication.

    Copyright © 2004

    ISA—The Instrumentation, Systems, and Automation Society

    All rights reserved.

    Printed in the United States of America.

    10 9 8 7 6 5 4

    ISBN 1-55617-875-1

    No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the publisher.

    ISA

    67 Alexander Drive, P.O. Box 12277

    Research Triangle Park, NC 27709

    www.isa.org

    Library of Congress Cataloging in Progress

    Dedicated to my wife, Susan,

    and children, Jennifer and Joseph III,

    for their tolerance, understanding, and support

    Contents

    Preface and Acknowledgements

    Chapter 1.Major Types of Maintenance

    Improvement Maintenance

    Corrective Maintenance

    Preventive Maintenance

    Summary

    Chapter 2.Advantages and Disadvantages

    Advantages

    Management Control

    Overtime

    Work Load

    Summary

    Chapter 3.Designing a PM Program

    Failure Data

    Improving Equipment Reliability

    Improvement Process

    Failures That Can Be Prevented

    Chapter 4.Economics of PM

    Benefit Versus Costs

    Chapter 5.Nondestructive Inspection

    Human Senses

    Thresholds

    Chapter 6.On-Condition Maintenance

    Chapter 7.Condition Monitoring Prediction

    Web-based Condition Monitoring

    Chapter 8.Scheduled Preventive Maintenance

    Chapter 9.Lubrication

    Chapter 10.Calibration

    Standards

    Inspection Intervals

    Control Records

    Chapter 11.Data and Information

    Organizing Data

    Range

    Cumulative Distribution

    Mean, Mode, and Median

    Graphics

    Standard Deviation

    Log-Normal Distribution

    Confidence Interval

    Risk, Certainty, and Uncertainty

    Moving Average

    Weighted Averages

    Sampling

    Chapter 12.Planning and Estimating

    Estimating Time

    Estimating Labor Cost

    Estimating Materials

    Feedback from Actual

    Chapter 13.Shutdown Planning

    Critical Path

    Coordination

    Chapter 14.Scheduling

    Prioritizing

    Coordination with Production

    Opportunity PM

    Assuring Completion

    Chapter 15.Computerized PM Systems

    Computer Aids for PM

    Work Orders

    Fixed Interval Scheduling

    Condition Monitoring and On-condition Maintenance

    Computerized PM Scheduling

    Resource Coordination

    Chapter 16.PM Metrics

    Chapter 17.Motivation

    Production/Maintenance Cooperation

    Effectiveness

    Chapter 18.Implementing a New PM Program

    Objectives and Goals

    Plans

    Chapter 19.Special Concerns

    Parts Availability

    Repairable Parts

    Detailed Procedures

    Quality Assurance

    Avoiding Callbacks

    Repairs at PM

    Data Gathering

    Summary

    True or False Questions

    Answers

    Selected Readings

    Preface and Acknowledgements

    This book is aimed at high equipment uptime and productivity. Literally everything will fail sometime – biological, electrical, electronic, hydraulic, mechanical, nuclear, optical, and especially humans. People spend considerable effort, money, and time trying to fix things faster. The best answer is to avoid the need to fix. No fix is better than fast fix. To quote Ben Franklin, An ounce of prevention is worth a pound of cure. Effective preventive maintenance (PM) is a fundamental support for high operational availability.

    Preventive maintenance means all actions intended to keep durable equipment in good operating equipment and avoid failures. New technology has improved equipment quality, reliability and dependability by fault-tolerance, redundant components, self-adjustments, and replacement of hydraulic and mechanical components by more reliable electronic and optical operations. However, many components can still wear out, corrode, become punctured, vibrate excessively, become overheated by friction or dirt, or even be damaged by humans. For these problems, a good PM program will preclude failures, enable improved uptime, and reduce expenses.

    Success is often a matter of degree. Costs in terms of money and effort to be invested now must be evaluated against future gains. This means that the time-value of money must be considered along with business priorities for short-term versus long-term success. Data must be gathered over time and analyzed to assist with accurate decisions. The proper balance can be tenuous to achieve minimal downtime and costs between preventive and corrective maintenance.

    PM can prevent failures from happening at a bad time, can sense when a failure is about to occur and fix it before it causes damage, and can often preserve capital investments by keeping equipment operating for years as well as the day it was installed. Predictive Maintenance is considered here to be a branch of Preventive Maintenance.

    Inept PM, however, can cause problems. Humans are not perfect. Whenever any equipment is touched, it is exposed to potential damage. Parts costs increase if components are replaced prematurely. Unless the PM function is presented positively, customers may perceive PM activity as, that machine is broken again. A PM program requires an initial investment of time, materials, people, and money. Payoff comes later. While there is little question that a good PM program will have a high return on investment, many people are reluctant to pay now if the return is not immediate. That challenge is particularly predominant is a poor economy where companies want fast return on their expenditures. PM is the epitome of pay me now, or pay me later. The PM advantage is that you will pay less now to do planned work when production is not pushing versus very expensive emergency repairs that may be required under disruptive conditions and cause production to halt and lose revenue. Good PM saves money over a product’s life cycle.

    In addition to economics, emotions play a prominent role in preventive maintenance. It is a human reality that perceptions often receive more attention than do facts. A good computerized information system is necessary to provide the facts and interpretation that guide PM tasks and intervals. PM is a dynamic process. It must support variations in equipment, environment, materials, personnel, production schedules, use, wear, available time, and financial budgets. All these variables impact the how, when, where, and who of PM.

    Management support is key to good PM. If management endorses the program, shows interest in activities, and evaluates results then PM will be done effectively. The converse is true of any activity that feels management does not care about them. Be proactive and tell management what you are doing. Explain the need to PM investment to minimize the life cycle costs and total costs of ownership. Show your financial people how the money is being spent so they will support your efforts at budget-setting time. Technology provides the tools for us to use and management provides the direction for their use. Both are necessary for success. These ideas are equally applicable to equipment and facility maintenance and field service in commerce, government, military, and industry.

    Acknowledgements

    The first edition of Preventive Maintenance was copyrighted in 1983. It was written at the request of several agricultural and mechanical colleges that needed a text book for courses in mechanical technology and maintenance. It received excellent reception and was used by many colleges, including the US Naval Academy, and in professional training. Translations have been done in languages including Arabic and French Canadian. The first edition of Preventive Maintenance benefited from Patton Consultants’ associates including Herbert C. Feldman, Lawrence S. Beale, Michael A. Felluca, and Mary Ann Bianchi. That edition was reviewed by Amby T. Uphold and personnel of Polystart Limited, and by Joseph Zdun and his national Service Staff of Leeds & Northrup.

    The second edition was copyrighted in 1995. It was helped by further input from Herb Feldman and Molly Forest. Participants in workshops on How to Design and Implement a Preventive Maintenance Program and Product Reliability, Availability, Quality, and Serviceability may recognize their enhancements. Susan O. Patton suggested changes to both editions that made the material easier to comprehend. Susan has also tolerated the considerable time required to write what is always the last book.

    This third edition is stimulated by both the simultaneous need to print more books and to update the material, especially about computerized support systems. The COMMS© COMputerized Management System originally designed by Patton Consultants, Inc. and Service InfoSystems, Inc. (another Patton company) was sold and went out of business along with its new owner. Roy J. Steele of Patton Consultants, Inc. provided suggestions that have improved this material. Training courses in Preventive Maintenance presented for Life Cycle Engineering and other organizations have always added clarification and new ideas that are included in this third edition of Preventive Maintenance.

    CHAPTER 1

    Major Types of Maintenance

    There are three main types of maintenance and three major divisions of preventive maintenance, as illustrated in Figure 1-1.

    Figure 1-1

    Structure of Maintenance.

    IMPROVEMENT MAINTENANCE

    Picture these divisions as the five fingers on your hand. Improvement maintenance efforts to reduce or eliminate entirely the need for maintenance are like the thumb, the first and most valuable digit. We are often so involved in maintaining that we forget to plan ahead and eliminate the need at its source. Reliability engineering efforts should emphasize elimination of failures that require maintenance. This is an opportunity to preact instead of react.

    For example, many equipment failures occur at inboard bearings that are located in dark, dirty inaccessible locations. The oiler does not lubricate those bearings as often as he lubricates those that are easy to reach. That is a natural tendency. One can consider reducing the need for lubrication by using permanently lubricated, long-life bearings. If that is not practical, at least an automatic oiler could be installed. A major selling point of new automobiles is the elimination of ignition points that require replacement and adjustment, introduction of self-adjusting brake shoes and clutches, and extension of oil change intervals.

    CORRECTIVE MAINTENANCE

    The little finger in our analogy to a human hand represents corrective (emergency, repair, remedial, unscheduled). At present, most maintenance is corrective. Repairs will always be needed. Better improvement maintenance and preventive maintenance, however, can reduce the need for emergency corrections. A shaft that is obviously broken into pieces is relatively easy to maintain because

    Enjoying the preview?
    Page 1 of 1