Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Everand Logo

Welcome to Everand!

  • Discover millions of ebooks, audiobooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    The Model Engineer
    The Model Engineer
    The Model Engineer
    Ebook128 pages1 hour

    The Model Engineer

    By Anon

    2.5/5

    ()

    Read preview

    About this ebook

    This book is a collection of vintage articles on the subject of engineering for model vehicles, with information on the design, construction, and installation of small engines. Profusely illustrated and full of invaluable information, this volume is highly recommended for those with an interest in model engineering, and would make for a fantastic addition to collections of related literature. Contents include: “Smoke Rings”, “A Model Steam Plant for a Coal-Fired Steamer”, “A Carburettor for the 'Busy Bee'”, “Carburettor Design”, “Almost a Swarm!”, “Compensation”, “The Variable Jet”, “'Air Bleed'”, “A Useful Device”, “Venner Lightweight Alkaline Accumulators”, “A Simple Photographic Rangefinder”, etc. Many vintage books such as this are becoming increasingly scarce and expensive. We are republishing this volume now in an affordable, high-quality edition complete with a specially commissioned new introduction on model building.
    LanguageEnglish
    PublisherRead Books Ltd.
    Release dateSep 16, 2016
    ISBN9781473355910
    The Model Engineer

    Read more from Anon

    Related to The Model Engineer

    Related ebooks

    Technology & Engineering For You

    View More
    View More

    Related podcast episodes

    Related articles

    • UNLIMITED

      Metal Folders

      Feb 5, 2020

      Metal Folders
      3 min read

    • UNLIMITED

      Fusion 360

      Aug 14, 2019

      Fusion 360
      3 min read

    • UNLIMITED

      Wild And Crazy Damascus

      Jan 21, 2020

      Wild And Crazy Damascus
      6 min read

    • UNLIMITED

      Mastering The Lathe 6

      Aug 6, 2021

      Mastering The Lathe 6
      8 min read

    • UNLIMITED

      Miter Plane

      Sep 1, 2020

      Miter Plane
      8 min read

    • UNLIMITED

      Doble Steam Motors

      Jun 9, 2019

      Doble Steam Motors
      6 min read

    • UNLIMITED

      Mastering The Lathe

      Oct 2, 2020

      Mastering The Lathe
      8 min read

    • UNLIMITED

      It Takes A Team

      Dec 13, 2021

      It Takes A Team
      23 min read

    • UNLIMITED

      Laminated Coping Saw

      Aug 10, 2023

      Laminated Coping Saw
      7 min read

    • UNLIMITED

      Pipe-fitting Mounts

      Jun 3, 2020

      Pipe-fitting Mounts
      2 min read

    • UNLIMITED

      Plasma Cutting

      Jun 12, 2020

      Plasma Cutting
      6 min read

    • UNLIMITED

      Make-do Tools

      Oct 2, 2020

      Make-do Tools
      10 min read

    • UNLIMITED

      Plans Guide

      Dec 1, 2020

      For 92 years, Model Airplane News has been publishing construction articles and selling plans designed and built by our contributors. Featuring all types of aircraft, from vintage pattern ships and sport flyers, to museum-scale civilian classics and

      28 min read

    • UNLIMITED

      Fine Tool Cabinet

      Aug 31, 2021

      Fine Tool Cabinet
      9 min read

    • UNLIMITED

      Gear Ratio Variables

      May 17, 2021

      Gear Ratio Variables
      5 min read

    • UNLIMITED

      Basic Rust Repair

      Nov 12, 2018

      Words and photography: Arvid Svendsen Syndication: Fox Living in the Chicago area means rust is a fact of life. From my perspective, metal repair is on the level of buying tyres. It’s necessary maintenance. My beloved ’66 Coronet 500, for instance,

      5 min read

    • UNLIMITED

      Basic Welding Technique

      May 4, 2020

      Basic Welding Technique
      10 min read

    • UNLIMITED

      Homebuilt Hero

      Nov 26, 2021

      Homebuilt Hero
      10 min read

    • UNLIMITED

      The Importance Of Being Square

      Jul 29, 2019

      The Importance Of Being Square
      4 min read

    • UNLIMITED

      Block Plane Basics

      Jun 4, 2020

      Block Plane Basics
      5 min read

    • UNLIMITED

      It’s Time To Up Skill

      Nov 30, 2018

      It’s Time To Up Skill
      10 min read

    • UNLIMITED

      Mitre Saw Station

      Apr 6, 2022

      Mitre Saw Station
      6 min read

    • UNLIMITED

      The Art of Toolmaking

      Feb 17, 2022

      The Art of Toolmaking
      7 min read

    • UNLIMITED

      Reviews

      Sep 17, 2019

      Reviews
      13 min read

    Related categories

    Reviews for The Model Engineer

    2.5/5

    2 ratings1 review

    What did you think?

    Tap to rate

    Review must be at least 10 words

    • 2/5
      This appears to be a single issue of the magazine from 1952. While interesting, it does not supply much in the way of useful project information.

      1 person found this helpful

    Book preview

    The Model Engineer - Anon

    SMOKE RINGS

    Our Cover Picture

    THE FINE photograph, from which our cover has been prepared, was submitted by Mr. A. Macdiarmid, of Nottingham. It depicts the huge crane at Finnieston Quay, Glasgow, working on T.S.S. Glenbank, which is being fitted with new engines and boilers. Great cranes of this kind sometimes attract the attention of model makers who are seeking an interesting prototype, and the late Mr. S. J. Ward was one enthusiast who built a splendid model of a large crane—a Craven—which can be seen at the Northampton College of Technology.

    Some idea of the enormous proportions of the Finnieston crane can be gathered from the picture, because there can be seen, at the foot of the crane, some locomotives built by the North British Locomotive Works and waiting to be loaded for export to South Africa, Australia and New Zealand.

    A Memorial to Mr. S. J. Ward

    WE LEARN from the Northampton Society of Model Engineers that some of the equipment of the late Councillor S. J. Ward, whose death was recently reported in these columns, has been presented to the society by Mrs. Ward, who is now president. This includes a 5-in. Seneca Falls lathe and a large drilling machine, which were used in the production of Mr. Ward’s superb models, some of which have been described in THE MODEL ENGINEER at various times. Several of his early models have also been given to the society, including his 1 in. scale 4-6-4 Baltic tank locomotive.

    At the recent annual general meeting, Mrs. Ward presented the awards made at the recent competition night, as follows: Members’ Cup, J. R. Mann; Strickland Cup, E. Hudson; Collier Cup, E. J. Szlumper; George Shaw Cup, H. J. Hawker; Bassett-Lowke Cup, W. A. Wells. A further award of one guinea was made to the winner of the Bits and Pieces competition, J. R. Mann. Mrs. Ward later announced that she was presenting the society with a silver cup, to be known as the S. J. Ward Memorial Cup.

    Index for Volume 106

    WE REGRET that, once again, we were not able to provide a bound-in index for the volume (106) which was completed with the June 26th issue, but we will send a copy to any reader who makes a special application for it.

    We would be obliged, therefore, if every reader who really requires a copy will advise us immediately, enclosing an envelope large enough to take the M.E. flat, stamped with a three-halfpenny stamp and addressed to himself. His copy of the index will be forwarded to him as soon as it is available.

    The West Midlands Federation Rally

    THIS ANNUAL event, held recently at Campbell Green, Sheldon, Birmingham, was again a great success, despite the inclemency of the weather, which vainly did its worst to damp enthusiasm. Traffic on the continuous track ran to full capacity, and never less than two locomotives were in action at any time until well into the evening. Several interesting new locomotives had their first trials on a track, including Mr. J. D. Curtis’s 3 1/2-in. gauge free-lance 2-6-4 tank (Birmingham S.M.E.) and Mr. Castle’s 5-in. gauge 0-8-0 tank, with Baker gear (Worcester S.M.E.), both of which performed exceedingly well. A further development this year was a display of control-line flying by two members of the Redditch M.E.S. The Birmingham Group of the International Radio Controlled Models Society also gave a very interesting demonstration, but their land models were handicapped by the wet weather, and their ship models by the lack of a suitable pool. There were 11 entries in the competition for the Federation Challenge Cup for the best model of the year, and the judges, Lt.-Cdr. Craine and Mr. Thompson, found it no easy task to pick out the winners. First place was awarded to Mr. F. A. A. Parisier’s brig Procrius (96 points), second place to Mr. J. K. Strickland’s 5-in. gauge 0-6-0 ex-U.S.A., W.D. locomotive (94 points), and a tie for third place was made by Mr. S. J. Applewhite’s 2 1/4-in. scale Peckett saddle tank locomotive and Mr. A. T. Judd’s free-lance steam coaster, Eletheria (91 points each).

    Road Locomotives at Chester

    DURING THE week May 5th to 10th, there was a fair at Chester, on a piece of ground bounded by Grosvenor Road, Castle Drive and the River Dee. Mr. W. G. Powell, of Buckley, was advised by a friend that a proper posh puffer and two dirty old puffers were to be seen there; so Mr. Powell went to investigate and, since he is keenly interested in road locomotives, he found a sight that gladdened his heart.

    The proper posh puffer proved to be a Burrell, No. 2788, named The Griffin, in really lovely condition. She was in steam but not actually working when Mr. Powell visited her.

    Of the dirty old puffers, one was Burrell No. 3865, without a name, but with No. 1 in the place where the name is usually to be found. This was a bigger engine than No. 2788 and was driving and lighting a waltzes ride and a set of Galloping Horses; she was equipped with a crane.

    The other d.o.p. was a McLaren named Goliath, driving and lighting a set of bumping-cars.

    Both these engines certainly merited the description which Mr. Powell’s friend had applied to them; but it is more than satisfactory to know that they are to be repainted before midsummer; in fact, this has already been started in the case of the McLaren.

    Mr. Powell adds that the Galloping Horses were a fine sight, especially as the accompanying music was being supplied by the old-fashioned organ (electrically driven). The absence of the centre-engine was not so much regretted when one remembered that the ride was being driven by the Burrel hidden far behind the stalls.

    Exhibition at Chelmsford

    FROM JUNE 4th to 7th, the Drill Hall at Chelmsford was the scene of another very comprehensive and attractive exhibition organised by the Chelmsford Society of Model Engineers. Locomotives, ships and boats, traction engines, aircraft, workshop equipment, model railways, clocks and scientific apparatus were all fully represented. The general standard of excellence was high and there was something to interest every model engineering enthusiast.

    In view of the recent discussion on electronic organs, readers may be interested to learn that, at this exhibition, one of the outstanding exhibits was an electronic organ built by two local brothers, J. J. and C. C. Clarke. J.J. gave frequent recitals on this instrument and proved that it was a thoroughly satisfactory piece of work. It is equipped with Swell and Great manuals, on each of which there are eight speaking stops, and there is also a 20-note pedal board. The tone of each stop is excellent and is produced entirely electronically. The apparatus is, admittedly, complicated, but it is not very difficult or bulky; the whole instrument is little, if any bigger than an ordinary double-manual harmonium. The sound is equal to that of a pipe-organ; after all, each note can be tuned to almost any degree of purity, according to the skill and requirements of the builder. For example, the tones of the flute and the trumpet can be reproduced by varying the intensity and harmonics of the fundamental notes. We hope to be able to publish a technical description of this very interesting instrument in the not-too-far-distant

    Enjoying the preview?
    Page 1 of 1