Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Everand Logo

Welcome to Everand!

  • Discover millions of ebooks, audiobooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    Practical Paracord Projects: Survival Bracelets, Lanyards, Dog Leashes, and Other Cool Things You Can Make Yourself
    Practical Paracord Projects: Survival Bracelets, Lanyards, Dog Leashes, and Other Cool Things You Can Make Yourself
    Practical Paracord Projects: Survival Bracelets, Lanyards, Dog Leashes, and Other Cool Things You Can Make Yourself
    Ebook692 pages2 hours

    Practical Paracord Projects: Survival Bracelets, Lanyards, Dog Leashes, and Other Cool Things You Can Make Yourself

    By Instructables.com

    ()

    Read preview

    About this ebook

    Parachute cord, which is now universally known as paracord, is a lightweight nylon rope originally used by paratroopers during World War II. It is now employed as a general purpose utility cord by military personnel and civilians alike. Paracord is an ideal material for making whips, for example, due to its durability and flexibility. Hikers and other outdoor enthusiasts have made survival bracelets” from paracord, which are meant to be unraveled when needed to secure cargo, lash together poles, and fix broken straps and laces. As more colors become available, crafters are discovering that paracord makes an excellent material for fun and stylish friendship bracelets, lanyards, belts, dog leases, key chains, and more.

    Originating from Instructables, a popular project-based community made up of all sorts of people with a desire to pass on their wisdom to others, Practical Paracord Projects contains ideas from a number of authors who show just how easy it is to make virtually anything from paracord.

    Practical Paracord Projects provides step-by-step instructions on a variety of useful and fun objects involving paracord. Guided by detailed photographs, the reader will create such practical and unusual projects as:

    A laptop harness
    A can koozie
    An eyeglass lanyard
    A hanging chair
    Sandals
    A leatherman pouch
    And much more!
    LanguageEnglish
    PublisherSkyhorse
    Release dateJul 15, 2014
    ISBN9781629148137
    Practical Paracord Projects: Survival Bracelets, Lanyards, Dog Leashes, and Other Cool Things You Can Make Yourself
    Author

    Instructables.com

    Instructables.com is a bona fide Internet sensation, a web-based community of motivated do-it-yourselfers who contribute invaluable how-to guides to the site on a wide range of topics, from gardening and home repair to recipes to gadgets that defy categorization. The site hosts more than 100,000 projects. More than 15 million people visit the site each month, leaving comments and suggestions on the ever-growing list of do-it-yourself projects.

    Read more from Instructables.Com

    Related to Practical Paracord Projects

    Related ebooks

    Outdoors For You

    View More
    View More

    Related podcast episodes

    Related articles

    • UNLIMITED

      Craft A Leather Belt

      Aug 10, 2018

      Craft A Leather Belt
      7 min read

    • UNLIMITED

      A Box-Maker’s SLED

      Jul 30, 2019

      A Box-Maker’s SLED
      2 min read

    • UNLIMITED

      Keep It Chilled

      Jan 27, 2022

      Keep It Chilled
      2 min read

    • UNLIMITED

      Mini Pry Bars

      Jun 22, 2021

      Few tools have as many practical applications as a pry bar. The mechanical advantages of the leverage that can be generated with a pry bar makes it the perfect tool for a variety of everyday tasks. Unfortunately, a standard crowbar isn’t the most con

      5 min read

    • UNLIMITED

      Three Knotty PLANT HANGERS

      Oct 4, 2019

      Three Knotty PLANT HANGERS
      6 min read

    • UNLIMITED

      Macramé: Knot A Problem!

      Jul 26, 2019

      Macramé: Knot A Problem!
      4 min read

    • UNLIMITED

      “AH, WILDERNESS!” Alkahest Moccasins & Leathercrafts

      Aug 1, 2019

      Eight years ago, on a fine spring day, Dustin Lyons and Tiera Ptacek set out on a life-changing, 350-mile odyssey, driving from San Francisco to Ashland, Oregon, in a tiny, Chevy Geo Metro. “We had it packed with pretty much everything we owned,” Dus

      8 min read

    • UNLIMITED

      Merry Macramé

      Dec 7, 2020

      Merry Macramé
      3 min read

    • UNLIMITED

      SeekingOut SCRAPS

      Jun 12, 2020

      SeekingOut SCRAPS
      6 min read

    • UNLIMITED

      Ridiculously 53 SIMPLE SHOP TIPS

      Mar 15, 2021

      The typical woodworker’s hunger for shop tips seems insatiable. We’re always looking for clever ways to do better work, increase efficiency, save money, and just plain make things easier. Over the years, our “Tips and Tricks” column has presented hun

      8 min read

    • UNLIMITED

      Get Started In CHIP CARVING

      Jul 11, 2022

      Get Started In CHIP CARVING
      3 min read

    • UNLIMITED

      Winding Yarn

      Aug 20, 2020

      Winding Yarn
      3 min read

    • UNLIMITED

      Why Knot?

      Jul 4, 2024

      Why Knot?
      3 min read

    • UNLIMITED

      Spinning a Yarn

      Jan 11, 2019

      Spinning a Yarn
      9 min read

    • UNLIMITED

      Basics And ‘All That Other Stuff’ You Need To Know … Eventually

      Sep 27, 2018

      by Annlee Butler I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will prov

      7 min read

    • UNLIMITED

      Basics And ‘All That Other Stuff’ You Need To Know … Eventually

      Jul 23, 2017

      by Annlee Butler I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will prov

      7 min read

    • UNLIMITED

      Basics And ‘All That Other Stuff’ You Need To Know … Eventually

      Mar 29, 2019

      I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will provide you with a ge

      7 min read

    • UNLIMITED

      Make Your Own Rope

      Aug 5, 2021

      Make Your Own Rope
      14 min read

    • UNLIMITED

      Black Emerger

      Aug 19, 2023

      Black Emerger
      1 min read

    • UNLIMITED

      Basics And ‘All That Other Stuff’ You Need To Know … Eventually

      Sep 27, 2018

      by Annlee Butler I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will prov

      7 min read

    • UNLIMITED

      Basic Instructions

      Jul 26, 2018

      by Annlee Butler I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will prov

      7 min read

    • UNLIMITED

      Basic Instructions

      May 24, 2018

      by Annlee Butler I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will prov

      7 min read

    • UNLIMITED

      Basics And ‘All That Other Stuff’ Need To Know … Eventually

      Sep 24, 2017

      by Annlee Butler I AM ALWAYS AMAZED at how many talented beaders and wire workers we have in Australia. Again this year our Inspiration Beading book is filled with projects to fuel your creativity. The diagrams and techniques described here will prov

      8 min read

    • UNLIMITED

      All Mixed Up

      Jan 25, 2018

      All Mixed Up
      3 min read

    • UNLIMITED

      Master a Beautiful BRAID JOB

      Oct 1, 2019

      Master a Beautiful BRAID JOB
      11 min read

    • UNLIMITED

      Irish Eyes are Smiling

      Nov 29, 2018

      Irish Eyes are Smiling
      3 min read

    • UNLIMITED

      The Simple Snare

      Feb 8, 2019

      The Simple Snare
      1 min read

    Related categories

    Reviews for Practical Paracord Projects

    0 ratings

    0 ratings0 reviews

    What did you think?

    Tap to rate

    Review must be at least 10 words

      Book preview

      Practical Paracord Projects - Instructables.com

      Introduction

      Every outdoorsman and woman knows that paracord is the number one item you don’t want to be caught without when camping. It is incredibly strong and useful in many situations, but it isn’t always easy to carry it around in a bundle. Don’t worry. The DIYers at Instructables have you covered. They’ll show you every way to weave, knot, and intertwine your paracord into bracelets, belts, and bags so you can easily bring it with you for any survival situation.

      What really makes paracord amazing is that there is so much you can do with it from tying crampons to your shoe or turning a spare piece of paracord into a fishing lure, to making a paracord army man and then decking him out with all the accessories a little army man could ask for—including a miniature paracord horse!

      So, get a roll of paracord, scissors, and a lighter, and you’ll be ready to learn how to make these Practical Paracord Projects!

      —Nicole Smith (Penolopy Bulnick)

      Jewelry

      Cobra Weave Bracelet

      By mattrush

      (http://www.instructables.com/id/Endless-Paracord-Bracelet/)

      I was looking online and found lots of paracord bracelets that have buckles so you can take them off. I came up with this design that doesn’t need to be taken off. Paracord is just as strong when it gets wet; it also dries pretty quickly. This bracelet also gives you one long bit of cord when it’s unraveled.

      Step 1: Make Loops

      Start by making folding the paracord in half and making two loops at either side, with the middle of it going behind the ends. Each loop should be the size of your wrist or wherever you want to wear it, plus one or two inches’ wiggle room.

      Step 2: Cobra Stitch

      Pull the two loops inwards so that they make a complete loop. Now fold the two ends back on themselves and begin to use the cobra stitch. For anyone new to this, it is the process of passing one end behind a center core and the other in front of it and threading each end through the loop created.

      Step 3: Tie Knots

      Keep tying these knots around the center two strands until you get back around to the other side. It is easiest to tie it snug and then try and slide it onto your wrist, as it’s hard to tie with one hand.

      Step 4: Tighten Ends

      To finish it off turn the bracelet inside out and thread the two ends back under the last two loops. A pair of pliers or a multitool is handy here to get the ends as tight as possible. Work the ends until it’s as tight as possible. Then cut the ends as close to the knot as possible. Then, using a lighter, wax the ends closed and heat the last knot slightly just to make it smoother. Turn it back the right way and slide it on your wrist. I only do it with one layer of cord as it’s not bulky or intrusive, but each to their own, so get creative.

      Bracelet with Buckle

      By Stormdrane

      (http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/)

      This tutorial will show how to make a paracord bracelet with a side-release buckle. When made on a larger scale, you can make this for use as a dog or cat collar as well. A reliable online source of paracord is the Supply Captain, and for side-release buckles I recommend Creative Designworks.

      Step 1: Materials

      You’ll need:

      • Paracord, or equivalent 1/8" diameter cord

      • Tape measure or ruler

      • Scissors

      • Side-release buckle

      • Lighter (torch lighter works best).

      The amount of cord used can vary, but for this example, we’ll use 10 feet of paracord to start with. Actual amount of cord used for the bracelet is about one foot of cord for every one inch of knotted bracelet length. So if your wrist is 8 inches, you’d use approximately 8 feet of cord.

      Step 2: Measure Wrist

      Wrap the paracord around your wrist and make a note of where the cord meets. Hold this point next to your ruler or tape measure, and that’s your wrist size.

      Step 3: Find the Center of the Cord

      Hold the ends of the cord together and find the center of the loop. Take the center of the cord and pull it through one end of the buckle (either side of the buckle, it doesn’t matter). Now pull the cord ends through the loop until it’s tightened up and attached to the buckle.

      Step 4: Finding the Bracelet Length

      Take the buckle apart and pull the free ends of the cord through the other part of the buckle, sliding it up toward the attached part. You’re going to measure the distance between the two buckle ends for the bracelet size for your wrist. Add about one inch to your measured wrist length; this will make the finished bracelet a comfortable fit. You’re measuring from the end of the female part of the buckle to the flat part of the male end of the buckle (the part with the prongs; they don’t count for the measurement because they fit inside the female part of the buckle when the bracelet is closed).

      Step 5: Start Making the Knots

      The knot used for the bracelet has a few different names—cobra stitch, Solomon bar, and Portuguese sinnet. Take the cord on the left side and place it under the center strands running between the buckle ends. Now take the cord on the right side under the left-side cord, over the center strands, and through the loop of the left-side cord. Tighten up the cords so the half knot you just formed is next to the buckle. Now take the right-side cord under the center strands. The left-side cord goes under the right-side cord, over the center strands, and through the loop of the right-side cord. Tighten up the cords (not too tight, just until they meet the resistance of the knot) and now you have a completed knot. You will continue, alternating the left and right sides as you go. If you don’t alternate, you’ll quickly see a twisting of the knots, and just undo the last knot and begin alternating to correct.

      Step 6: Continue Knotting

      Keep tying the knots until you have filled the space between the buckle ends. The knots should be uniform from one end to the other. Tie each knot with the same tension to keep them all the same size.

      Step 7: Trim the Excess Cord and Melt the Ends

      You can now use your scissors to trim off the extra cord close to the last knot you tied. I trim one at a time and use my lighter to quickly melt the end I cut, wait a second for the melted cord to cool just a bit, and then use my thumb to press the melted end onto the surrounding cord so it hardens as it cools and attaches. You must be careful with this step. The melted cord is extremely hot, and it’s possible to get burned, so you might also try using a soldering iron or woodburning tool for the melting step if you wish, or you could even use something like a butter knife, the side of your lighter, or the knurled section of a tool to flatten out the melted end of the cord to finish it.

      An alternative to melting the ends is to tuck/pull the ends under the last couple of knots. I have used hemostats to do this on the inside of the bracelet, then trimmed them to finish. It does work, and is just barely noticeable, as the cords add a slight bulge at that end of the bracelet.

      Step 8: You’re Finished

      If you did everything correctly, it should look something like this finished one. Once you know what you’re doing, you can vary the amount of cord used by making the knots tighter or looser and pushing the knots closer together as you go.

      A tip for paracord bracelets: If the side-release buckle is large enough, you can loop the paracord around it again before you start knotting to fill in the extra room on the buckle. The 1/2 side-release buckles are a tight fit for this, but will work, and the 5/8 size is just right. This leaves a two-strand core for the bracelet when you start knotting. Now, you could also have a four-strand core by starting with a lark’s head on the first buckle end, double wrapping on the second buckle end (at your wrist size), running cord back to and over the first buckle end, then starting to knot over the four-strand core. Or, for a six-strand core, lark’s head first buckle, run the two strands around second buckle (at your wrist size), back to and around first buckle (now has four strands around), then back to and around second buckle, and start knotting around the six core strands. This gives extra cord in case you need it for whatever, but it also makes the paracord bracelets thicker and more rounded, which I personally didn’t care for and that’s why I stick with the two strand core.

      Step 9: Other Variations

      Once you have the hang of the basic bracelet/collar, you can add another layer of cobra stitches overlapping first set of knots, called a king cobra stitch/doubled Solomon bar/doubled Portuguese sinnet. The amount of cord used for a king cobra is about twice as much as for the regular stitch. Both the 1/16 and 3/32 sizes work well for the bracelets and can be used alone or combined with paracord. Glow-in-the-dark paracord is available now, found from various online vendors and on ebay, but I haven’t used any myself, so I couldn’t say if it’s any good or not, or how long it glows, etc.

      Wide Bracelet

      By Falcon_WOG

      (http://www.instructables.com/id/Wide-Paracord-Bracelet/)

      I will show you how I made a wide paracord bracelet with a side-release buckle. This is also a good plan for a collar for your dog.

      Step 1: Pick Your Colors

      The first step is picking your colors. The optimal setup is using two colors that contrast. Also, I recommend a 1 side-release buckle. This allows you plenty of room to insert the cord. The 5⁄8 size I used made it very tight to work with. To figure out how much paracord you will need, measure your wrist where you want the bracelet to sit at. Take that measurement and multiply by 12 to get your approximate start length. You should have plenty of cord left over at the finish. It’s better to have too much than not enough. The color you want as the outside one should be your wrist measurement times 12. You should make 2 lengths of this. The color you have for the inside will be twice as long as the outside color, or 24 times your wrist measurement. Loop the strands onto your buckle using a cow-hitch knot. One tip is to make sure you keep the same pattern going and not switch which cord goes over and which one goes under. If you do switch the order it will make the pattern look disjointed.

      Step 2

      Take cord 4 and go under cord 5 and over the standing end of cord 6. Snug up the half knot.

      Enjoying the preview?
      Page 1 of 1