The Back to Basics Handbook: A Guide to Buying and Working Land, Raising Livestock, Enjoying Your Harvest, Household Skills and Crafts, and More
()
About this ebook
More than just practical advice, this is also a book for dreamers even if you live in a city apartment you will find your imagination sparked, and there’s no reason why you can’t, for example, make a loom and weave a rag rug. Complete with tips for old-fashioned fun (square dancing calls, homemade toys, and kayaking tips), this is the ultimate concise guide to voluntary simplicity.
Related to The Back to Basics Handbook
Related ebooks
Self-Sufficiency: A Complete Guide to Baking, Carpentry, Crafts, Organic Gardening, Preserving Your Harvest, Raising Animals, and More! Rating: 0 out of 5 stars0 ratingsThe Essential Guide to Self-Sufficient Living: Vegetable Gardening, Canning and Fermenting, Keeping Chickens, and More Rating: 0 out of 5 stars0 ratingsThe Ultimate Guide to Homesteading: An Encyclopedia of Independent Living Rating: 4 out of 5 stars4/5Back to Basics: A Complete Guide to Traditional Skills Rating: 4 out of 5 stars4/5The Weekend Homesteader: A Twelve-Month Guide to Self-Sufficiency Rating: 4 out of 5 stars4/5Starting a Homestead: A Guide to Finding Property and Moving Toward Self-Sufficiency: How to Homestead, #1 Rating: 0 out of 5 stars0 ratingsThe Frugal Homesteader: Living the Good Life on Less Rating: 4 out of 5 stars4/5How to Make Money Homesteading: Self Sufficient and Happy Life Rating: 0 out of 5 stars0 ratingsThe Modern-Day Pioneer: Simple Living in the 21st Century Rating: 4 out of 5 stars4/5The Good Living Guide to Country Skills: Wisdom for Growing Your Own Food, Raising Animals, Canning and Fermenting, and More Rating: 0 out of 5 stars0 ratingsThe Dreamer's Homestead Garden: 6 Simple Steps from Plan to Produce for Self-Sufficiency Rating: 0 out of 5 stars0 ratingsUltimate Guide to Self-Reliant Living, The Rating: 0 out of 5 stars0 ratingsLiving Off the Grid: A Beginner's Guide to an Independent and Self-Sustaining Lifestyle: Self-Sufficient Living Rating: 0 out of 5 stars0 ratingsA Grumpy Guide to Building Your Own Off Grid Home Rating: 0 out of 5 stars0 ratingsHome-Grown Harvest: The Grow-Your-Own Guide to Sustainability and Self-Sufficiency Rating: 0 out of 5 stars0 ratingsThe Self-Sufficient Backyard Homestead Rating: 4 out of 5 stars4/5The Biggle Garden Book: Vegetables, Small Fruits and Flowers for Pleasure and Profit Rating: 0 out of 5 stars0 ratingsFood Self-Sufficiency: Basic Permaculture Techniques for Vegetable Gardening, Keeping Chickens, Raising Bees, and More Rating: 0 out of 5 stars0 ratings$10 Root Cellar: And Other Low-Cost Methods of Growing, Storing, and Using Root Vegetables: Modern Simplicity, #3 Rating: 0 out of 5 stars0 ratingsFive Acres and Independence Rating: 4 out of 5 stars4/5Backyard Homesteader: How to Save Water, Keep Bees, Eat from Your Garden, and Live a More Sustainable Life Rating: 0 out of 5 stars0 ratingsBackyard Homesteading: A Back-to-Basics Guide to Self-Sufficiency Rating: 4 out of 5 stars4/5Family Homesteading: The Ultimate Guide to Self-Sufficiency for the Whole Family Rating: 0 out of 5 stars0 ratingsHomesteading From Scratch: Building Your Self-Sufficient Homestead, Start to Finish Rating: 2 out of 5 stars2/5
Home Improvement For You
How to Keep House While Drowning: A Gentle Approach to Cleaning and Organizing Rating: 5 out of 5 stars5/5The Gentle Art of Swedish Death Cleaning: How to Free Yourself and Your Family from a Lifetime of Clutter Rating: 3 out of 5 stars3/5Organizing for the Rest of Us: 100 Realistic Strategies to Keep Any House Under Control Rating: 4 out of 5 stars4/5How to Manage Your Home Without Losing Your Mind: Dealing with Your House's Dirty Little Secrets Rating: 4 out of 5 stars4/5Decluttering at the Speed of Life: Winning Your Never-Ending Battle with Stuff Rating: 4 out of 5 stars4/5Order from Chaos: The Everyday Grind of Staying Organized with Adult ADHD Rating: 5 out of 5 stars5/5World's Best Life Hacks: 200 Ingenious Ways to Use Everyday Objects Rating: 4 out of 5 stars4/5The Self-Sufficient Backyard Homestead Rating: 4 out of 5 stars4/5The Complete Book of Clean: Tips & Techniques for Your Home Rating: 5 out of 5 stars5/5The Magnolia Story (with Bonus Content) Rating: 4 out of 5 stars4/5The Complete Book of Home Organization Rating: 4 out of 5 stars4/552 Prepper Projects: A Project a Week to Help You Prepare for the Unpredictable Rating: 5 out of 5 stars5/5Nobody Wants Your Sh*t: The Art of Decluttering Before You Die Rating: 5 out of 5 stars5/5Homegrown & Handmade: A Practical Guide to More Self-Reliant Living Rating: 4 out of 5 stars4/5Mini Farming: Self-Sufficiency on 1/4 Acre Rating: 5 out of 5 stars5/5Off-Grid Projects: Step-by-Step Guide to Building Your Own Off-Grid System Rating: 0 out of 5 stars0 ratingsSmall Apartment Hacks: 101 Ingenious DIY Solutions for Living, Organizing and Entertaining Rating: 4 out of 5 stars4/5Laundry Love: Finding Joy in a Common Chore Rating: 5 out of 5 stars5/5Declutter Like a Mother: A Guilt-Free, No-Stress Way to Transform Your Home and Your Life Rating: 4 out of 5 stars4/5Home Decor Cheat Sheets: Need-to-Know Stuff for Stylish Living Rating: 5 out of 5 stars5/5The Complete Guide to Building Your Own Home and Saving Thousands on Your New House Rating: 5 out of 5 stars5/5The Prepper's Workbook: Checklists, Worksheets, and Home Projects to Protect Your Family from Any Disaster Rating: 0 out of 5 stars0 ratingsClassic Household Hints: Over 500 Old and New Tips for a Happier Home Rating: 4 out of 5 stars4/5It's All Too Much Workbook: The Tools You Need to Conquer Clutter and Create the Life You Want Rating: 4 out of 5 stars4/5
Reviews for The Back to Basics Handbook
0 ratings0 reviews
Book preview
The Back to Basics Handbook - Abigail Gehring
Part One
Land: Buying It—Building on It
A house, we like to believe, can be a noble consort to man and the trees. The house should have repose and such texture as will quiet the whole and make it graciously one with external nature.
—Frank Lloyd Wright, The Natural House
The homes of the settlers conformed naturally to the great architect’s precepts. People built slowly in those days, over generations, and they understood their land as only those who spend their lives on it can. Their building materials were the very stuff of the earth around them—trees from their woods, rocks from their fields, adobe mud beneath their feet—so it was small wonder that their homes blended well with the surrounding countryside. Above all, they built their homes themselves, and so each mitered beam, each length of floorboard, each hand-riven shingle took on a special meaning of its own. In Land: Buying It—Building on It
the process of creating a home the traditional way is described, from the acquisition of a site to the construction of the house to the installation of walls and outbuildings. Some of these jobs are difficult; others are within the capabilities of the average person. All help impart a personal touch to a house. In the final analysis that is the ingredient that makes a house a home.
Buying Country Property
Realizing the Dream Of Owning a Place In the Country
With careful planning and a modest investment almost anyone can turn the dream of owning a small farm or a few acres of country land into a reality. And with some effort this land may provide a significant portion of life’s amenities: wood for the fireplace, fresh produce for the table, a pond for fishing or swimming—even waterpower to generate electricity. But as with any other major purchase, care and caution are required.
The first step is to have, in general terms, a strong notion of what it is you want. Those desiring year-round warmth will obviously have different priorities than those who wish to see the seasons change. Prospective part-time farmers will look for one kind of land, whereas weekend sojourners will look for another. Whether you enjoy isolation or prefer neighbors nearby is another consideration to ponder. And, of course, there is the matter of money: how much you can afford to put down, how much you can pay each month for a mortgage and taxes. Once you have made these decisions, pick an area or two to investigate. Get the catalogs of the Strout and United Farm real estate agencies, and look for ads in the Sunday paper real estate section. Also subscribe to local papers from the regions of your interest; these may provide lower priced listings plus information on land auctions.
When a property appeals to you, investigate—first by phone and then in person. When looking, do not neglect small matters, such as television reception, the contours of the land, and the style of the farmhouse; but never lose sight of your ultimate goals or basic priorities, and gauge the property in that light.
To Buy or Not to Buy: Resist That Impulse
Once you have found a piece of property that appears to meet your needs, resist the temptation to come to terms. This is the time for an in-depth investigation rather than a purchase. After leaving the parcel, think about it, talk about it, try to remember its contours, and list all the things you do not like as well as the things you do. If after a week or so the land still is appealing, arrange to spend an entire day tramping about it.
Walk slowly about the property in the company of your family. Among the subjects of discussion should be these: Is the ratio of meadow to woodlot about what you have in mind? Does the woodlot consist of hard or soft woods? (The former are generally more valuable as timber and fuel.) Is the meadow overlain with ground cover, indicating some fertility? Is it swampy? Is there a usable residence on the property? If not, can you afford to build? Is there a road that cuts across the property into a neighbor’s driveway? If so, there is likely to be an easement on the parcel, conferring on the neighbor the right to cross at will. If there is no electricity, gas, or telephone service, ask yourself honestly how well you can get along without these conveniences. And if your goal is to be a part-time farmer and full-time resident, check into employment possibilities in the area.
If the answers to most of these questions are satisfactory, then begin a more formal survey of the property. For those who plan to grow vegetables, grains, or fruits, the question of soil fertility becomes a major factor in any ultimate decision. Take a spade and dig down—way down—in several widely scattered places. Ground that is adequate for good crops will have a layer of topsoil at least 10 inches deep; 12 or 15 inches deep is better. The topsoil should be dark, and when handled it should feel soft, loose, and crumbly to the touch. If the topsoil seems rich enough and deep enough, make doubly certain by taking several samples to the nearest county agent; he can analyze it for acidity (pH) and mineral content and tell you what crops are best to grow on it. Another way of discovering what crops the soil will support is to find out what the neighbors are growing. If the farm over the fence has a healthy stand of corn, and a thriving vegetable garden, the chances are good that the land you are looking at will also accommodate those crops.
When walking the land, look for evidence of soil erosion. Gullies are a sign of erosion, as are bared roots of trees and bushes. Parched, stony, light-colored soils indicate that erosion has carried off the rich topsoil. If you are only planning a small kitchen garden, erosion and lack of topsoil can be repaired. But if extensive cropping is your goal, the cost of restoring scores of acres to fertility may be beyond your reach.
Check the drainage capacity of the land. If the subsoil is so compacted or rocky that it cannot quickly absorb water, then the plants you sow are likely to drown. Also bear in mind that poor drainage can make it difficult to install a septic system, since sewage will tend to back up or rise to the surface. Inspect the property in the wake of a heavy rainstorm. If the surface is muddy or even very spongy, it is a sign that the drainage is poor. Dig several widely spaced holes in the ground, each one about 8 inches around and 3 to 4 feet deep. Check the soil near the bottoms. If it is hard-packed and unyielding to the touch, chances are it is relatively impermeable to water. Or pour a bucket of water on the ground, wait 10 minutes, and dig to see how far the water has penetrated. For the most accurate information, a percolation test by a soil engineer is necessary.
If you are planning on building a house, carefully inspect possible construction sites. The land for the house should be reasonably flat, with easy access to a public road. Do not overlook the site’s relationship to the winter sun. A house with a northern exposure, particularly if it is on a slope, is likely to cost considerably more to heat than one with a southern exposure that can take advantage of the warming rays of the low-lying winter sun.
Finally, there is the all-important matter of water—the lack of a reliable source of water for drinking and irrigation can make an otherwise desirable site worthless. The subject is discussed in detail below.
In all events, try to delay a commitment until you see the land in all seasons; both the blooms of spring and the snows of winter can hide a multitude of evils.
Buildings Are Important But Water Is Vital
In assessing country property the most important single consideration is the availability of an adequate supply of fresh, potable water. With water virtually anything is possible; without it virtually nothing. Consider, for example, that a single human being uses between 30 and 70 gallons per day; a horse between 6 and 12; a milk cow about 35; and a 500-square-foot kitchen garden, if it is to thrive, must have an average of 35 gallons of water per day. Even if the property is to be used only as a country retreat, a family of four will require a bare minimum of 100 gallons every day for such basic needs as drinking, washing, cooking, and sanitation. In short, complete information about water availability is an imperative when assessing country property. This is not to say, however, that a piece of land should, in all cases, be rejected if the existing water supply is inadequate, since in most instances a water system can be developed (see pp.42–46). Nevertheless, this can be an expensive, laborious, and time-consuming effort, and it is far more satisfactory if a water system is already in place.
Plants that provide clues to water in dry country
e9781616082611_i0004.jpgRushes and cattails are a sign of marshland or of water very near the surface.
e9781616082611_i0005.jpgPickleweed indicates the presence of salty water at or just below the surface.
e9781616082611_i0006.jpgSaltbush indicates water near the surface, but the quality may be poor.
e9781616082611_i0007.jpgMesquite indicates that water is to be found from 10 to 50 ft. beneath the ground.
e9781616082611_i0008.jpgReeds signify the existence of good quality water very close to the surface.
e9781616082611_i0009.jpgBlack greasewood generally means that mineralized water exists 10 to 40 ft. down.
e9781616082611_i0010.jpgRabbit brush will grow only where there is water no more than 15 ft. below the ground.
e9781616082611_i0011.jpgElderberry shrubs are a fairly good sign that there is water about 10 ft. down.
Existing systems. If there is a well or other water source, along with plumbing in the house, in the out buildings, and at the fields, test the system out as completely as possible. Try all of the taps: one at a time, several at once, all at once. Is the flow sufficient for your purposes? Does the water pressure drop significantly when several taps are on at once? Has the water been tested for potability and for minerals, particularly salt? Water with even a relatively low salt content may be useless for drinking or irrigation. Remember that a fast flow in spring may become but a trickle in the dog days of summer. This is another reason to visit a property in different seasons before purchase.
Aboveground water. A river, stream, brook, or pond on the property may provide adequate water, particularly for irrigation. A freshwater spring bubbling up from the earth can usually provide drinking water, but again, such sources may dry up during the summer. If you plan to use a river or pond for recreational purposes, such as swimming or fishing, make certain that pollutants from logging operations, sewage treatment plants, and factories are not being dumped upstream. Pollutants, of course, can make the water unusable for irrigation as well. Check with local and state authorities on the amount of water you may take from a watercourse. Also make sure that the source is properly positioned to allow you to get the water from where it is to where it will be needed. A stream below a building site and garden plot will be useful only with the installation of pumps. Even one above these areas may require siphons and considerable piping if it is to be useful.
Marshlands. Though marshes and swamps indicate a high water table and, under the proper conditions, a possible pond site, they are considered negative factors by most builders, since they provide breeding grounds for mosquitoes and other insect pests and the land is useless for construction unless drained and filled.
Public water supplies. In a number of rural areas water is supplied by an outside utility company. Some utilities are owned by the government, others are owned privately with rates established by law, and still others are associations of landowners who have pooled their resources to bring water in from distant sources so that they can irrigate their lands and provide for themselves and their livestock. Hookups to any of these water utilities can be expensive and, in the case of the landowners’ associations, impossible to obtain. It may be, however, that the owner from whom you are obtaining the land already has shares in the local cooperative water association. If so, make sure that the transfer of these shares is included as part of the purchase price and that you know in advance the amount of water to which your shares will entitle you.
Water rights. The fact that a parcel has water either aboveground or underground is not necessarily a guarantee that the owner has the right to exploit the resource. In some states even underground water must be shared. Before purchasing any property, have your lawyer check on your water rights.
Sizing Up the House and Barns
The extent and condition of improvements play a large role in determining the worth of any piece of property. Direct access to a county highway via well-maintained internal roads is a major factor when considering a piece of land. A house, barn, and other outbuildings in good condition, the presence of primary utilities, and a central heating system all add to the market value of any parcel. When assessing improvements, look beyond the appearances and into such matters as structural soundness, electrical service capacity, the age of the heating system, and the relationship of the house to the winter sun.
Clues to a building’s age
e9781616082611_i0012.jpgIrregular lath marks on beams indicate building dates from 18th or early 19th century.
e9781616082611_i0013.jpgAccordion lath marks (rarely seen) were produced by a technique not used after 1830.
e9781616082611_i0014.jpgStraight lath marks, regularly spaced, indicate post-1850 construction.
e9781616082611_i0015.jpgNo ridgepole on roof (top) usually means pre-1800; presence of ridgepole indicates later date.
e9781616082611_i0016.jpgHand-sawed beams, with irregular, slanted saw marks, date from before the 1750s.
e9781616082611_i0017.jpgVertical cuts in regular patterns usually indicate lumber was sawed before 1860.
e9781616082611_i0018.jpgCurving saw marks point to post-1860s construction–the more even, the later.
e9781616082611_i0019.jpgBlunt wood screws with no taper were not made after 1840. Hand-cut notches in heads can give clues to age of screws.
e9781616082611_i0020.jpgTapered screws with pointed ends were made after 1840. Notches in heads were cut by machine rather than by hand.
e9781616082611_i0021.jpgWrought nails, with square, tapered shanks and hand-forged heads bearing hammer marks, were made before 1800.
e9781616082611_i0022.jpgCut nails, sliced from a sheet of iron, were not made before 1800. They are still manufactured for use in flooring.
Benchmarks for the buyer
Major points to consider when contemplating the purchase of a piece of country property are listed below. Use them as a checklist to avoid costly mistakes.
Contract of sale. The contract describes the terms under which the property is being sold. it should include a description of all encumbrances on the property and should be made contingent upon a successful title search and the ability of the buyer to secure adequate financing. Have your lawyer draw up the contract of sale rather than accept a real estate agent’s standard form.
Easements. if land has no direct access to a highway, make sure you have an easement (legally binding right-of-way) across intervening properties. Know also if neighbors have an easement on the property you plan to buy.
Eminent domain. Many public and quasi-public agencies have the right to condemn land (with compensation to owners) for roads, drainage canals, dams, airports, school construction, power lines, rights-of-way into bordering state-owned property, and the like. Check with the local planning board to ascertain if any condemnation proceedings are contemplated.
Land contracts and mortgages. Land contracts are the least advantageous means of buying land because the seller or financing agency holds title until the purchase is fully paid off. The title holder may, during this interval, encumber the property by using it as collateral; the purchaser can lose the land if the title holder fails to make payments. Mortgages in which the buyer has title to the property and uses it as collateral offer greater protection against foreclosure.
Mineral and other encumbrances. The seller or an earlier owner may have sold or reserved the right to exploit minerals, timber, or even the water on the land. These encumbrances, if properly recorded, are legally binding.
Survey. Check with county recorder to determine if a legally binding map of the property has been made. if not, insist that a licensed surveyor draw such a map, preferably at the seller’s expense.
Taxes. Check with local authorities to find out the amount of taxes (property, school, water, sewer) on the property you contemplate buying. Also try to determine if these taxes have been rising rapidly in recent years. some states tax standing timber, mineral deposits, and water rights. Make sure there are no liens for unpaid taxes on the property.
Title search and insurance. Have your lawyer or a title insurance company check records to make sure you are buying land free of liens and encumbrances. Purchase title insurance—a one-time expense—that will guarantee the accuracy of the title search.
Water rights. Contract of sale should include clause in which seller guarantees a minimum water supply. Make sure the clause is in accordance with state laws on water rights.
Zoning laws. Check with the local zoning board to be certain you may use your land in the manner you intend. Also check building and health codes for the same purpose.
First examine the house as a whole. Is it big enough for your needs? Does it afford sufficient privacy? Does it appear to be well maintained? Very important is the placement of the house. To take full advantage of the low-lying winter sun, it should present a broad front to the south and have a large proportion of its window openings facing south. Look at the windows themselves. Are storm windows and tight-fitting screens installed? Make notes as you move along the outside of the house and as you inspect the inside. Check for wood rot both inside and out, using an ice pick to jab at the beams and supports. If the pick goes in easily, there is probably wood rot, an expensive condition to repair. Look for signs of termites and carpenter ants, particularly along the baseboards of the ground floor and in the exposed joists in the basement. Also check the main fuse box to see if the electrical service is sufficient for your needs (modern service is at least 100 amps at 240 volts), then inspect the water heater as to age and capacity. A four-person family requires a 30-gallon gas water heater or a 50-gallon electric model. As you move from room to room, look up and down as well as around. Stains on the ceilings or evidence of recent plastering may mean roof leaks; horizontal stains on the lower part of basement or ground floor walls indicate flooding. Finally, hire a building engineer for an in-depth analysis. The deficiencies he finds may not necessarily be overwhelming, but they could provide you with a strong bargaining position for lowering the price by thousands of dollars.
Many people considering a move to the country seek out the charm of 18th- or 19th-century structures. Real estate agents recognize this and often emphasize that a house is one or two centuries old. Generally, it is best to verify such claims. Some tips on what to look for in dating a house are given on opposite page.
Sources and resources
Books
Nash, George. Old Houses: A Rebuilder’s Manual. Needham Heights, Mass.: Prentice Hall, 1979.
Orme, Alan D. Reviving Old Houses: Over Five Hundred Low-Cost Tips and Techniques. Avenal, N.J.: Random House Value, 1994.
Poore, Patricia, ed. The Old House Journal Guide to Restoration. New York: NAL-Dutton, 1992.
Sherwood, Gerald E. How to Select and Renovate an Older House. New York: Dover, 1976.
Planning Your Home
The Key Ingredient In Home Design Is You
A well-designed home, like a well-tailored garment, should fit your taste, needs, and pocketbook. In years gone by, homesteaders achieved this goal by designing and building their own houses. One reason they were successful was that they were guided by traditions handed down over the centuries. Another was that their homesteads evolved over many years, each generation altering and enlarging the original to suit its particular needs so that the house slowly became better and better.
Nowadays, the best way to ensure that the home you build will have the right feel for you and your family is to take an active part in the design process. This is true whether you intend to put up a vacation cabin, a family residence, a retirement home, or a full-fledged homestead. Learn about design, look at as many homes as you can, and if you plan to hire an architect, shop carefully before you choose one.
Choosing a Building Site
The main house—even if it is just a cabin or cottage—is almost always the focal point of any site development plan, and the first step in designing it is to decide where it will be located. To choose a site intelligently, you should have a good idea of how you want to live. Do you favor a secluded home far from the road? Are you interested in a sweeping vista? Do you plan to put up a sprawling one-story structure or a more compact two-story house? (The former is useful if stair climbing presents a problem for anyone in the family; the latter is generally more energy efficient.) Do you foresee the need for future additions and, therefore, a larger site? Do you require a full basement? (If you do, avoid a site that will require expensive blasting of bedrock.)
Frame dwelling in the Northeast has sloping roof to allow snow to slide off easily in the winter. Having the barn attached to the main house makes it easier to care for the animals in poor weather.
e9781616082611_i0023.jpge9781616082611_i0024.jpgLog home is well protected by trees against fall or winter winds. if built in a hot climate, log homes can be built on piers to allow air to circulate beneath.
e9781616082611_i0025.jpgStone cottage has an eyebrow dormer to allow extra light into the second floor. Like brick, stone is fireproof and maintenance free. Attic helps retain heat, partially compensating for poor insulating ability of stone.
Next, examine what your property has to offer. Consider the general lay of the land, the bearing strength of the ground (see Preparing the Site, p.21), the soil’s ability to absorb rainwater and sewage, the frost depth, the availability of drinking water, the height of the water table, the amount of annual sunlight, and the direction of prevailing winds. Pay particular attention to accessibility. How far is a proposed site from existing electric and telephone service lines? How many feet of driveway will have to be installed to provide access to the nearest public road? Of all development costs, road building is often the most extreme. In general, a well-chosen building site should suit the terrain and provide adequate drainage away from the foundation. For this reason, gently sloping ground is usually best but not always necessary, since pole or pier foundations that compensate for uneven ground can often be constructed.
Energy efficiency is becoming a basic element in site selection just as it was in the past. Significant savings in heating can be realized by building on the lee side of a rise or by locating the building site downwind from a stand of trees. A site that takes advantage of the low winter sun—even if the home is not designed for solar heating—can reap major long-term energy savings.
Most sites require some shifting of earth. Because of the labor and expense involved, thorough planning is a must. The goal is to move as little earth as possible. Of the three methods of leveling—cut, fill, and a combination of the two—the last is easiest and most economical.
Using the Lay of the Land to Your Advantage
A detailed map can be an invaluable planning aid. To make your own map, you will need a plane table (a board mounted on a tripod is best, but a card table will do), straight pins, a ruler, a spirit level, and a 10-foot pole marked in feet and inches. Start by drawing the outline of your property on a large sheet of paper; if you do not have a boundary map, you can get one at the town assessor’s office. The remainder of the job consists of plotting as many distinct features as possible. If your property is relatively open, you can also find the height of each point and sketch in equal-altitude contour lines. When mapping, concentrate on features that will tie the map together, such as a road, a stream, a hedgerow, or an old stone wall. Either pace off the distance to each feature or else take sightings on it from two different locations: the intersection of the two lines of sight will pinpoint the feature.
e9781616082611_i0026.jpgCut-and-fill leveling technique requires least movement of soil.
Getting Your Ideas Down On a Sheet of Paper
Settling on a design for a home reflects a series of compromises between the ideal and the possible. The most fundamental compromise involves size: the expense of building a home is directly proportional to the number of cubic feet of interior space it contains. In addition, a larger home requires more energy to heat and cool and is more expensive to maintain.
One way to cut down on cubic feet without sacrificing comfort or floor area is to keep the ceilings low. Typically, a traditional two-story farmhouse will have 8-foot ceilings on the ground floor and 7-foot ceilings upstairs where the bedrooms are located. Another energy saver is an attic. The heat that rises to the peak of a cathedral ceiling is almost totally wasted. An attic not only eliminates this waste but also functions as a jumbo-sized insulating space, moderating the temperature both summer and winter.
Space in houses divides three ways: communal (living room, dining room, recreation room), private (bedroom, studio, study), and service (kitchen, bathroom, garage, laundry, closets). The allocation of these spaces into rooms depends on the needs and tastes of the family. When sketching your designs, pay particular attention to the way the different spaces interact. Traffic flow between areas should be smooth, and a private space should never lie in the flow between two communal areas. Service areas generally function as appendages to communal or private areas. The kitchen, for example, must be adjacent to the dining room, and the bathrooms should be convenient to the sleeping quarters. Separation can be important; a noisy family room should be far away from an area used for studying.
Home design should take into account future needs. A growing family will either have to build extra space into the original house or plan on future additions. The escalating cost of building materials argues for the first alternative, but any excess space will mean unnecessary heating bills, property taxes, and mortgage payments until the day that it is put to use. Plan your addition so that it meets the following criteria: it should not interfere with natural lighting or spoil the view; it should not conflict with local zoning requirements; and, in the case of a second floor addition, the original structure should be strong enough to support it.
Drawing Accurate Floor Plans
After a basic layout has been developed, the next step is to draw carefully scaled floor plans. Try to base room dimensions, ceiling heights, and the widths and lengths of floors on increments of 4 feet insofar as possible. This is because standard sheets of plywood and other building materials are sold in 4- by 8-foot sheets. In addition, keep in mind the following design criteria:
Closets. Minimum depth for a closet is 2 feet.
Counter space. Allow 2 feet from the wall for kitchen counters, since most kitchen equipment protrudes about that amount.
Doors. Interior doors are generally 2 1/2 feet wide; the front door should be 3 feet wide.
Hallways. Widths run from 2 feet up to 4 feet and more. The longer the hallway, the wider it should be.
Kitchen aisles. Small is not necessarily convenient. A minimum aisle width of 4 feet is recommended when equipment is laid out along parallel walls; increase this dimension to 5 feet if the kitchen is U-shaped.
Room dimensions. The ratio of room length to width should be no more than two to one. Overall size varies from 5 feet by 5 feet for a small foyer to 20 feet by 30 feet or larger for a living room. In general, the bigger the room, the higher the ceiling should be.
Walls. Allow a thickness of 1/2 foot for both interior and exterior walls. If the walls are masonry, allow 1 foot.
When drawing plans for a two-story house, trace the structural elements of the ground floor, then use the outline to draw the rooms on the second floor.
Architects and Other Outside Aids
A home is the most expensive possession that a family is ever likely to own. With so much time, labor, and money invested, it is vital that the house plans be accurate and sound. In most cases this means that outside design aid will have to be enlisted.
The most straightforward way to get help is to hire an architect. A good architect does not come cheaply—a fee of 10 percent of the cost of a home is not unusual. One way to save money is to have the architect make only a basic sketch, then let a contractor work out the practical details. This procedure still gives you the benefit of the architect’s ability to establish lighting, space relationships, flow patterns, and environmental harmony.
Idealized 15-acre parcel illustrates how natural features of land can be put to best use. Land use principles apply to small parcels as well.
e9781616082611_i0027.jpge9781616082611_i0028.jpg1. set up table at a corner of your property line, insert pin at corresponding point in map outline, and adjust table so it is horizontal. Then sight from pin to another known boundary point, align map along line of sight, and insert second pin.
e9781616082611_i0029.jpg2. sight from first pin to other distinct features. Have assistant pace off distance to each point. Then have him hold measuring pole while you sight to it. Height of table (A) minus height from base of pole to line of sight (B) equals height of point.
e9781616082611_i0030.jpg3. Move table to one of the points you have already mapped, reorient map as in step 1, and map more points as in step 2. By setting up table at a number of locations, you can map enough points to sketch in the topography of your land.
e9781616082611_i0031.jpgLayout of space can begin with a series of informal bubble
sketches. Each bubble represents a particular use of space. The more of these diagrams you draw, the nearer you are likely to come to sensing the best floor plan. You should also make a point of visiting and examining as many homes as possible.
Sketch of floor plans, with rooms in approximately correct proportion, follows space layout. With such sketches, defects in the location of doorways and patterns of personal movement can be discerned. Bathroom in sketch shown, for example, might be considered too long a walk from kitchen.
e9781616082611_i0033.jpgClustering of utilities, such as waterlines and drainpipes, in one area of the house is advisable from point of view of economy, ease of installation, and ease of maintenance. in a typical layout the kitchen sink and laundry room are placed back to back with a bathroom located above.
e9781616082611_i0034.jpgRoom size should be suited to function—large and spacious for a main communal area, small and cozy for a den or child’s bedroom. Cathedral ceilings are attractive, but they waste heat. A sleeping loft can reduce heat loss in a room with a cathedral ceiling without destroying the ceiling’s dramatic impact.
e9781616082611_i0035.jpgBuild small and add on later is often preferable to building everything at once, particularly for a growing family. As the years pass, you will know more accurately whether you need that extra bedroom or studio. However, the initial design should take possible additions into account.
e9781616082611_i0036.jpgFrame construction and post-and-beam construction are the two principal building methods. in the former, house weight is borne by all segments of each wall; in the latter, by separate posts. Frame construction costs less and is more widely used; post-and-beam permits larger spaces, bigger windows.
e9781616082611_i0037.jpgQuadrille paper with four or five squares to the inch is handy for sketching floor plans. if the side of each square in sketch is set to 1 ft., the area of each room can be quickly determined by counting the number of squares it encloses.
When choosing an architect or contractor—or for that matter when doing your own designing—there is no substitute for examining actual houses: no floor plan or rendition can replace the real thing. Visit all the homes you can (most homeowners will be happy to show you around if you explain your purpose), and note which homes give you a good feeling and which leave you with a negative impression. Try to spot the features you like or dislike; sometimes the difference between a desirable and undesirable home comes down to nothing more than carpeting, wallpaper, or furniture. Before you pick an architect or contractor, quiz him closely; especially if you are interested in energy efficiency, solar heating, or other special technology. Do not rely on verbal assurances alone. Rather, ask the architect or contractor to show you examples of his work.
An alternative to hiring an architect is to purchase standard plans. Magazines containing floor layouts and artist’s renderings are available at building supply dealers and magazine stores. After choosing a plan, you can order complete blueprints for a few hundred dollars.
e9781616082611_i0038.jpgInexpensive tools can aid in drawing floor plans and vertical views. A triangle makes it easy to draw lines at right angles; an architect’s scale lets you choose from 12 different scales that automatically convert feet to inches; and a furniture template helps you indicate such items as chairs, sofas, and shelves.
e9781616082611_i0039.jpgModel of house can be constructed out of foam core board or corrugated cardboard. Carefully draw the outlines of floor plans, house sides, interior walls, and roof on the cardboard, then cut out pieces along outlines, including doorways and windows, and put the model together with rubber cement or transparent tape. With a little imagination you can place yourself in each room, sense how it feels, and make design adjustments. By setting the model outdoors on a sunny day (or simulating the sun with a high intensity lamp) you can tell how much natural lighting can be expected.
Sources and resources
Books and pamphlets
Ching, Francis D.K. Building Construction Illustrated. New York: Van Nostrand Reinhold, 1991.
DeCristoforo, R.J. Housebuilding: A Do-It-Yourself Guide. New York: Sterling Publishing, 1987.
DiDonno, Lupe, and Phyllis Sperling. How to Design & Build Your Own House. New York: Knopf, 1987.
Kern, Barbara, and Ken Kern. The Owner-Built Homestead. New York: Scribner’s, 1977.
Ramsey, Charles G., and Harold R. Sleeper. Architectural Graphic Standards, 7th ed. New York: John Wiley, 1993.
Shemie, Bonnie. Houses of Wood: Northwest Coast. Plattsburgh, N.Y.: Tundra Books, 1994.
Sherwood, Gerald H. and Stroh, Robert C., eds. Wood Frame House Construction: A Do-It-Yourself Guide. New York: Sterling Publishing, 1992.
Uniform Building Code. Whittier, Calif.: International Conference of Building Officials, 1994.
Wagner, Willis H. Modern Carpentry. South Holland, Ill.: Goodheart-Willcox, 1992.
Walker, Les, and Jeff Milstein. Designing Houses: An Illustrated Guide. Woodstock, N.Y.: Overlook Press, 1979.
Wood Frame House Building. Blue Ridge Summit, Pa.: TAB Books, 1991.
Preparing the Site
Carving Your Homestead From the Wilderness
A small cabin on a minimal foundation normally needs little site preparation. For a larger home, however, the work of clearing the land, leveling a building site, developing an access road, excavating, and laying a foundation sometimes requires as much labor, time, and expense as erecting the house itself. Pioneer settlers, lacking power machinery, searched for building sites that required a minimum of preparation. Though such sites are scarce today, the loss is more than offset by modern techniques and equipment that permit the development of lands that the pioneers would have been forced to pass up.
Planning and Preparation
The job of site development starts in the winter, when trees are bare and the features of the terrain are clearly visible. This is the time of year to lay out your plans in detail. It is also the time to cut and haul away any trees that have value as lumber or firewood.
Start actual clearing as soon as possible after the spring thaw, when the ground is firm and dry: land cleared later in the year seldom develops enough ground cover to prevent erosion. The initial stages require only hand tools—a chain saw, an ax, and a brush hook. Later, heavy equipment must be brought in for grading and excavation. A rented gasoline-powered chipper is useful for shredding brush; the chips make excellent mulch for gardening, landscaping, and erosion control. If you have the time and energy, hand clearing has advantages over machinery: far greater numbers of trees and shrubs can be left undisturbed, and there will be less damage to the natural features of the surrounding area. Hand clearing also saves money and gives you additional time to plan the final construction.
e9781616082611_i0040.jpgIt takes two to survey. The assistant (right) will point to a spot. When that spot is in line with the surveyor’s scope, the assistant will measure its height above ground. That height, minus the height of the scope, will give the ground elevation where the pole stands.
The Four Stages of Site Development
e9781616082611_i0041.jpg1. start clearing in winter by cutting down trees that are on the building site. Winter is the best season for logging, since wood is driest and snow on the ground eases the job of hauling. Leave 3-ft. stumps to ease the job of removing them later.
e9781616082611_i0042.jpg2. Wait until spring, when the ground is fully thawed, to pull stumps. Use animals or a mechanical aid, such as a winch, unless they are to be removed by bulldozer. Ordinary cars and trucks do not have enough traction for the job.
Surveying the site, grading the land, and excavating the foundation and drainage field are jobs for professionals unless you happen to have experience in this type of work. A home is too important to risk the consequences of trial-and-error learning, so assess your abilities fairly before you begin.
Clearing the Land and Building an Access Road
The job of site development starts with clearing the land and constructing an access road. There was a time when this work was accomplished with the sweat and muscle of animals and men, but today the fastest and cheapest method is to hire a bulldozer run by an experienced operator. Prepare in advance for the job of clearing by marking features that might affect the grading of the site and access road on your development map. Also rent a builder’s level and measuring rod; you will need them to make sure that the building site and access road are graded to the proper angles.
e9781616082611_i0043.jpg3. Erect batter boards to mark building lines and excavation boundaries. simple foundation trenches can be dug by hand, but a powered backhoe with an experienced operator is usually more economical in the long run.
e9781616082611_i0044.jpg4. Pouring a foundation is the last step before construction begins.
You will need plenty of assistance, since the job is long and difficult even if you hire a cement mixer. For maximum strength the entire footing should be poured at one time.
Tree removal should be thought out carefully. Generally speaking, stands of native hardwoods are more valuable than evergreens and should receive priority if a choice has to be made to cut one type or the other. An exception would be a case where dense evergreens can serve as a windbreak or where diseased hardwoods may eventually fall and damage the house. Trees less than 4 inches in diameter, along with brush and undergrowth, usually can be cleared away with little worry. Consult a forester, however, before removing large numbers of bigger trees; he can help you work out a plan for gradual removal that will allow the remaining growth to adjust to altered water-table characteristics. Use paint or plastic ribbon to distinguish trees that are to be removed; mark trees that are to be saved with paint or ribbon of another color. Trees that are cut should be carried away as lumber or sawed into firewood and left to season. Stack firewood nearby, between standing trees; it will be easier to haul after it is seasoned.
Access roads should be 10 feet wide or more—a wide road will last longer than a narrow one because wear and tear is spread over a larger surface. Grade all curves to an inside radius of 30 feet for a car, 45 feet if large vehicles, such as oil trucks, will use the road. A turnaround at a garage or dead end should be a minimum of 30 feet by 40 feet. Drivers must have at least one car length of unobstructed vision at all points along the road, so foliage should be kept low along curves. Similarly, trim trees and shrubs far enough back from the shoulders to prevent them from interfering with traffic. Try, however, to leave a screen of foliage for soil control, privacy, and encouragement of wildlife.
Homemade tools for grading
e9781616082611_i0045.jpgFresno scraper, for moving loose dirt and gravel, is made from 55-gal. drum cut in half with ends left intact. Bolt or weld a blade of 1/2-in.-thick steel along bottom edge, and add braced handle made of 2 × 4 s or thick poles.
e9781616082611_i0046.jpgBuck scraper smooths high spots left by fresno. Use sturdy 2 × 12 s for buckboard, 1/4-in.-thick steel for blade, strap iron for bracing. Handle is bent iron pipe. Operator stands on trailer board, applies pressure to handle to regulate blade.
Taking elevations with a builder’s level
e9781616082611_i0047.jpg1. Mount builder’s level on tripod and adjust until bubble is stable throughout 360° rotation of telescope. Measure height of scope above the ground.
e9781616082611_i0048.jpg2. Have assistant hold measuring rod at point where elevation reading is desired, then sight rod through scope. Rod marking, minus scope height, is elevation.
e9781616082611_i0049.jpg3. Take elevations of surrounding points by rotating telescope; tripod must remain fixed. in each case, subtract scope height from rod reading to obtain result.
If a road is being put in on a steep slope, do not cut it directly uphill. Instead, traverse the slope by following the contour lines. Slope gradients should be no more than 10 percent (a 1-foot rise for every 10 feet in length) to minimize vehicle strain and road damage from braking and wheel spinning. In order to prevent landslides, embankments should be smoothed back to their angles of repose–the point at which a given material ceases to slide downhill of its own accord. Incorporate gutters, ditches, and culverts into the roadway to minimize erosion, mud formation, and frost heaving.
Road surfaces of dirt, gravel, or crushed rock are adequate in most parts of the country although occasional routine maintenance will be necessary. Regrading and smoothing require little more than hard work and often can be accomplished with the simple homemade equipment shown below.
Laying the Groundwork Gets You Started
After the building site has been cleared and leveled, actual construction can begin. The first step is to set up accurate building lines to mark the structure’s perimeter. Once that is accomplished, the area can be excavated for the foundation. Start by setting the corner stakes, which identify the exact locations of each corner of the proposed building. Make these stakes of 2 × 2 lumber, 2 to 3 feet in length, and sharpen their ends symmetrically to keep them from twisting when driven into the ground. Drive the first stake so that it is centered over the spot selected for the first corner of the building. Locate the second corner by measuring from the first, then drive another stake into the ground at that spot. The two stakes define the corners, length, and position of one side of the building. The other corners and sides can now be found by measuring out from the established corners according to the ground plan of the building. Each time a new corner is established, drive a stake into the ground to mark it. Square or rectangular structures require only four corner stakes. If the building is L-shaped or has additional projections, stake out a central rectangle, then lay out the extensions.
Precise right angles are essential throughout. One method of achieving them, explained in Step 1 on following page, is to use the Pythagorean theorem. Another way is to build an oversize try square in the shape of a right triangle; construct it from a metal angle iron or from lumber carefully selected for straightness. Place the square at a known corner of the site so that one arm lies along the established straight line and the other arm extends at right angles to it in the direction of the corner location you wish to find. Measure along this arm to establish the new corner.
The corner stakes are usually removed during excavation, since their locations normally place them in the path of any foundation trenches that must be dug. In order to keep a permanent record of their location, horizontal boards known as batter boards are set up on stakes several feet outside the site at each corner. The boards are then notched with saw cuts so that strings stretched between them will intersect directly over the corner stakes. Batter boards are used to record other information as well, such as excavation boundaries and footing widths, and are generally left in place throughout most of the building process.
Setting Corner Stakes and Batter Boards
e9781616082611_i0050.jpg1. Locate corner stakes at right angles to known building lines with help of Pythagorean formula. stakes A and B mark corners of known line x. Length of side y is specified in plans. Compute length of z by adding together square of side x and square of side y; z equals the square root of sum (z = e9781616082611_i0051.jpg . Now attach tape equal in length to z to stake A and another tape equal in length to y to stake B. The point on the ground where both tapes are stretched tight when held together is correct spot for C.
e9781616082611_i0052.jpg2. Complete corner stake layout by using methods described in step 1 to locate remaining stake. Check final rectangle by stretching tape between diagonally opposite stakes: both diagonals should be equal. Next step is to erect batter boards. set central batter board stakes 6 ft. behind corner stakes along extended diagonals. Use homemade oversize try square built of metal or lumber to locate the remaining batter board stakes, and drive them about 6 ft. from each central stake, making sure they are parallel to the building lines.
e9781616082611_i0053.jpg3. Horizontal 1 × 6s complete the batter board assemblies. set up a builder’s level, and have an assistant hold a measuring rod at the highest corner stake. sight to the rod, and record the difference (D) between the rod reading and the minimum height of the foundation above grade. Next, have the assistant hold the rod alongside each batter board stake in turn. in each case sight to the rod, subtract the distance D, and mark the stake at that point. Nail on the 1 × 6s with their top edges touching the marks.
e9781616082611_i0054.jpg4. Record location of building corners by stretching twine between batter boards so that their intersections fall directly over the centers of the corner