Essentials of Polymer Flooding Technique
()
About this ebook
Provides an easy-to-read introduction to the area of polymer flooding to improve oil production
The production and utilization of oil has transformed our world. However, dwindling reserves are forcing industry to manage resources more efficiently, while searching for alternative fuel sources that are sustainable and environmentally friendly. Polymer flooding is an enhanced oil recovery technique that improves sweep, reduces water production, and improves recovery in geological reservoirs. This book summarizes the key factors associated with polymers and polymer flooding—from the selection of the type of polymer through characterization techniques, to field design and implementation—and discusses the main issues to consider when deploying this technology to improve oil recovery from mature reservoirs.
Essentials of Polymer Flooding Technique introduces the area of polymer flooding at a basic level for those new to petroleum production. It describes how polymers are used to improve efficiency of “chemical” floods (involving surfactants and alkaline solutions). The book also offers a concise view of several key polymer-flooding topics that can’t be found elsewhere. These are in the areas of pilot project design, field project engineering (water quality, oxygen removal, polymer dissolution equipment, filtration, pumps and other equipment), produced water treatment, economics, and some of the important field case histories that appear in the last section.
- Provides an easy to read introduction to polymer flooding to improve oil production whilst presenting the underlying mechanisms
- Employs “In A Nutshell” key point summaries at the end of each chapter
- Includes important field case studies to aid researchers in addressing time- and financial-consumption in dealing with this issue
- Discusses field engineering strategies appropriate for professionals working in field operation projects
Essentials of Polymer Flooding Technique is an enlightening book that will be of great interest to petroleum engineers, reservoir engineers, geoscientists, managers in petroleum industry, students in the petroleum industry, and researchers in chemical enhanced oil recovery methods.
Related to Essentials of Polymer Flooding Technique
Related ebooks
Handbook of Hydraulic Fracturing Rating: 0 out of 5 stars0 ratingsPetroleum Engineering: Principles, Calculations, and Workflows Rating: 5 out of 5 stars5/5Poly(lactic acid): Synthesis, Structures, Properties, Processing, and Applications Rating: 0 out of 5 stars0 ratingsOilfield Chemistry and its Environmental Impact Rating: 0 out of 5 stars0 ratingsFormation Testing: Supercharge, Pressure Testing, and Contamination Models Rating: 0 out of 5 stars0 ratingsFormation Testing: Pressure Transient and Contamination Analysis Rating: 0 out of 5 stars0 ratingsDriller: An Oilman's Fifty Years in the Field Rating: 0 out of 5 stars0 ratingsSketches in Crude Oil: Some Accidents and Incidents of the Petroleum Development in All Parts of the Globe Rating: 0 out of 5 stars0 ratingsElectromagnetic Well Logging: Models for MWD / LWD Interpretation and Tool Design Rating: 5 out of 5 stars5/5Fundamentals of the Petrophysics of Oil and Gas Reservoirs Rating: 0 out of 5 stars0 ratingsThe Wildcatters: An Informal History of Oil-Hunting in America Rating: 0 out of 5 stars0 ratingsAcid Gas Injection and Carbon Dioxide Sequestration Rating: 0 out of 5 stars0 ratingsRules of Thumb for Petroleum Engineers Rating: 0 out of 5 stars0 ratingsApplied Hydro-Aeromechanics in Oil and Gas Drilling Rating: 0 out of 5 stars0 ratingsFrac Without a K Rating: 0 out of 5 stars0 ratingsAn Introduction to Petroleum Technology, Economics, and Politics Rating: 0 out of 5 stars0 ratingsAdvanced Petroleum Reservoir Simulation: Towards Developing Reservoir Emulators Rating: 0 out of 5 stars0 ratingsEnhanced Oil Recovery Handout: A Focus on Waterflooding Rating: 0 out of 5 stars0 ratingsMeasurement While Drilling: Signal Analysis, Optimization and Design Rating: 0 out of 5 stars0 ratingsDipmeter Surveys in Petroleum Exploration Rating: 5 out of 5 stars5/5American Petroleum Worldwide Oil Rating: 0 out of 5 stars0 ratingsElements of Petroleum Science Rating: 0 out of 5 stars0 ratingsFormulas and Calculations for Drilling Operations Rating: 0 out of 5 stars0 ratingsOil and Gas Exploration: Methods and Application Rating: 0 out of 5 stars0 ratingsGamble in The Devil's Chalk Rating: 0 out of 5 stars0 ratingsReservoir Engineering of Conventional and Unconventional Petroleum Resources Rating: 1 out of 5 stars1/5Geomechanics in CO2 Storage Facilities Rating: 0 out of 5 stars0 ratingsAsset integrity management systems Standard Requirements Rating: 3 out of 5 stars3/5Oil & Gas Royalty Nightmares Rating: 0 out of 5 stars0 ratingsWave Propagation in Drilling, Well Logging and Reservoir Applications Rating: 0 out of 5 stars0 ratings
Technology & Engineering For You
The Art of War Rating: 4 out of 5 stars4/5The Invisible Rainbow: A History of Electricity and Life Rating: 5 out of 5 stars5/5A Night to Remember: The Sinking of the Titanic Rating: 4 out of 5 stars4/5The Big Book of Hacks: 264 Amazing DIY Tech Projects Rating: 4 out of 5 stars4/5Vanderbilt: The Rise and Fall of an American Dynasty Rating: 4 out of 5 stars4/580/20 Principle: The Secret to Working Less and Making More Rating: 5 out of 5 stars5/5The Art of War Rating: 4 out of 5 stars4/5The 48 Laws of Power in Practice: The 3 Most Powerful Laws & The 4 Indispensable Power Principles Rating: 5 out of 5 stars5/5The Systems Thinker: Essential Thinking Skills For Solving Problems, Managing Chaos, Rating: 4 out of 5 stars4/5The Big Book of Maker Skills: Tools & Techniques for Building Great Tech Projects Rating: 4 out of 5 stars4/5Ultralearning: Master Hard Skills, Outsmart the Competition, and Accelerate Your Career Rating: 4 out of 5 stars4/5Understanding Media: The Extensions of Man Rating: 4 out of 5 stars4/5The Fast Track to Your Technician Class Ham Radio License: For Exams July 1, 2022 - June 30, 2026 Rating: 5 out of 5 stars5/5The Wuhan Cover-Up: And the Terrifying Bioweapons Arms Race Rating: 4 out of 5 stars4/5Longitude: The True Story of a Lone Genius Who Solved the Greatest Scientific Problem of His Time Rating: 4 out of 5 stars4/5Artificial Intelligence: A Guide for Thinking Humans Rating: 4 out of 5 stars4/5Logic Pro X For Dummies Rating: 0 out of 5 stars0 ratingsThe CIA Lockpicking Manual Rating: 5 out of 5 stars5/5Pilot's Handbook of Aeronautical Knowledge (Federal Aviation Administration) Rating: 4 out of 5 stars4/5Mother of God: An Extraordinary Journey into the Uncharted Tributaries of the Western Amazon Rating: 4 out of 5 stars4/5Summary of Nicolas Cole's The Art and Business of Online Writing Rating: 4 out of 5 stars4/5The ChatGPT Millionaire Handbook: Make Money Online With the Power of AI Technology Rating: 4 out of 5 stars4/5Beginner's Guide to Reading Schematics, Fourth Edition Rating: 4 out of 5 stars4/5Rethinking Narcissism: The Bad---and Surprising Good---About Feeling Special Rating: 4 out of 5 stars4/5Lab 257: The Disturbing Story of the Government's Secret Germ Laboratory Rating: 3 out of 5 stars3/5Selfie: How We Became So Self-Obsessed and What It's Doing to Us Rating: 4 out of 5 stars4/5Seeing Further: The Story of Science and the Royal Society Rating: 4 out of 5 stars4/5
Related categories
Reviews for Essentials of Polymer Flooding Technique
0 ratings0 reviews
Book preview
Essentials of Polymer Flooding Technique - Antoine Thomas
Preface
Polymer flooding was first applied in the early 1960s. A spurt of applications of the process occurred between 1980 and 1986, but innovation was limited because those applications were dominated by tax considerations. However, beginning with the massive Daqing polymer flood in China in 1996, polymer flooding has experienced impressive innovation and growth in field applications. The author of this book works for a company (SNF) that was instrumental in most of the important field applications of polymer flooding throughout the world. As such, SNF acquired a unique perspective on the full range of topics associated with polymer flooding. That perspective is reflected in this book – especially in the last five chapters.
There are several key challenges whose solution would greatly aid the viability of polymer flooding. First, improvements are need in our ability to distribute the energy (induced pressure gradient) from a polymer drive deep into the reservoir (where the vast majority of oil resides). To date, this issue has largely been addressed by in‐fill drilling – that is, placing injection and production wells closer together. Use of parallel horizontal wells has also been of value here. Even so, with existing polymer floods, we often must induce fractures in injection wells to allow economic injection rates for the viscous fluids. Polymer flooding could benefit greatly from improved characterization, placement, and exploitation of fractures (natural and induced) in reservoirs. This is especially true in less‐permeable reservoirs.
Diagram with shaded art work depicting different elements of Polymer Flooding Technique.A second major area for improvement is reducing retention (sometimes called adsorption) of polymers by the reservoir rock. The polymer must penetrate deep into the porous rock of the reservoir in order to contact and displace the oil. If too much polymer is retained by the rock, the polymer may never penetrate sufficiently into the reservoir. Polymer retention can easily account for the largest economic hurdle in a polymer flood. In the past, laboratory studies (especially on outcrop rock) have often been overly optimistic about retention – especially in less‐permeable rock and for associative polymers. Reduced polymer retention would be of great value.
A third important challenge is in expanding polymer flooding to hotter reservoirs. Great strides have been made in identifying monomers/polymers with sufficient stability for application in these reservoirs. However, the cost and viscosity associated with these polymers are often economically prohibitive. Improved manufacturing methods may be of substantial help here.
Treatment of produced polymer fluids is a fourth critical area for improvement. The viscous nature of polymer solutions often results in produced oil/water emulsions that are difficult to separate. Produced polymer has also been tied to other production problems. New methods to address these issues are needed. An ability to recycle produced polymers would also have value. Improved sampling of produced fluids is also needed, in that knowledge of whether the polymer propagates intact through a formation provides critical guidance to the operation and expansion of a polymer flood.
This book starts at a very basic level, for those with limited prior knowledge of petroleum production. The author's goal is to provide an easy‐to‐read introduction to the area of polymer flooding to improve oil production. The book also describes polymers to improve efficiency of chemical floods (involving surfactants and alkaline solutions). Chapters are short and end with a nutshell
summary so the reader can quickly grasp the fundamentals. Each chapter also contains key references to allow more detailed examination of individual topics. The first few chapters provide brief introductions to oil recovery, chemical flooding methods, and polymer flooding. Chapter 4 lays out the important characteristics of polymers used for polymer flooding and important tests for their evaluation. Here, it is easy to overlook a crucial contribution that was made to polymer flooding technology by polymer manufacturers. In 1986, when oil prices collapsed from ~$30/bbl to ~$16/bbl, HPAM polymers typically cost about $2/lb. Most oil companies abandoned development of enhanced oil recovery processes because the chorus of oil company managers was, Chemical flooding for oil recovery will never be viable because the price of polymers (and other chemicals) is tied to oil prices.
However, because of innovations by polymer manufacturers, HPAM prices were commonly around $1/lb in 2012 when oil prices were over $100/bbl.
Chapters 5 through 9 provide a concise view of several key polymer‐flooding topics that can't be found elsewhere. These are in the areas of pilot project design, field project engineering (water quality, oxygen removal, polymer dissolution equipment, filtration, pumps, and other equipment), produced water treatment, economics, and some important field case histories. Overall, this book is essential reading for anyone considering implementation of a polymer flood or chemical flood.
Randy Seright
January 2018
Abbreviations
« Inches $ Dollars % Percent °C Degrees Celsius μ Dynamic viscosity μm Micrometer 3D Three dimensions AIBN Azobisisobutyronitrile AMPS Acrylamido‐2‐methylpropane sulfonic acid API American Petroleum Institute AS Alkali polymer injection ASP Alkali‐surfactant‐polymer injection ATBS Acrylamide tertiary butyl sulfonic acid atm Atmospheres bbl Barrels BCF Bioconcentration factor bpd Barrels per day C30 Molecule composed of 30 carbon atoms CAPEX Capital expenditures CDG Colloidal dispersion gel CEOR Chemical enhanced oil recovery cm Centimeters cm³ Cubic centimeters cP Centipoise CSS Cyclic steam simulation D Darcy d Days Da Daltons DGF Dissolved gas flotation DOE Department of Energy DR Drag reduction EDTA Ethylenediaminetetraacetic acid EFSA European food safety authority Eh Oxido‐reduction potential EOR Enhanced oil recovery ERDA Energy Research and Development Administration FCM First‐contact‐miscible Fe Iron FPSO Floating production storage offloading ft Feet ft/d Feet/day fw Fractional flow FWKO Free‐water knockout tank g Grams g/L Grams per liter g/mol Grams per mol GPC Gel permeation chromatography H2S Hydrogen sulfide HOCNF Harmonized Offshore Chemical Notification Format HLB Hydrophilic lipophilic balance HPAM Anionic polyacrylamide HSE Health safety and environment IFT Interfacial tension IGF Induced gas flotation IOR Improved oil recovery k Permeability kcal Kilocalories kg Kilograms L Liters LCST Lower critical solution temperature m Meters m.s‐1 Meters per second m²/g Square meters per gram mD Millidarcys MF Microfiltration mL Milliliters mm Millimeters mN Millinewtons mPa Millipascals Mw Molecular weight N Newtons nm Manometers NEC No effect concentration NPV Net present value NVP N Vinylpyrrolidone O/W Oil‐in‐water OECD Organization for Economic Co‐operation and Development OiW Oil‐in‐water OOIP Oil originally in place OPEX Operational expenditures P Polymer injection PAN Polyacrylonitrile PDI Polydispersity index pH Potential of hydrogen PLT Production logging tool ppb Parts per billion ppm Parts per million psi Pounds per square inch PSU Polymer slicing unit PV Pore volume PVDF Polyvinylidene fluoride Redox Reduction/Oxidation Rk Residual resistance factor Rm Resistance factor RO Reverse osmosis rpm Rotations per minute s‐1 Reciprocal second SAC Strong acid cation membrane Sor Residual oil saturation SP Surfactant polymer injection SPE Society of Petroleum Engineers Sw Water saturation SWCTT Single well chemical tracer test Swi Initial water saturation TDS Total dissolved salts th. bbl Thousand barrels THPS Tetrakis hydroxymethyl phosphonium sulphate UF Ultrafiltration USA United States of America UV Ultraviolet VRR Void replacement ratio W Watts W/O Water‐in‐oil WAC Weak acid cation membrane WOR Water‐oil ratio WSO Water shut‐off wt Weight η Kinematic viscosity
About the Author
Antoine THOMAS holds an MSc in petroleum geosciences from the Ecole Nationale Supérieure de Géologie in Nancy, France (2009). He joined SNF in 2011 as a reservoir engineer dealing with polymer flooding project design, implementation, and assistance for customers worldwide. In 2013, he spent part of his time in the R&D department, building the core flooding capacities for SNF and managing R&D projects in enhanced oil recovery (EOR) and hydraulic fracturing. He moved to Moscow in 2018 to supervise the oil and gas business from a technical standpoint, while maintaining contact with all SNF subsidiaries. He has published several papers and enjoys giving public lectures to share important learnings about EOR and hydraulic fracturing.
Thank you to all SNF reviewers and contributors who participated in the production of this book, including: Pascal Remy, René Pich, Nicolas Gaillard, Christophe Rivas, Julien Bonnier, Rémi Marchal, Flavien Gathier, Thierry Duteil, Dennis Marroni, Olivier Braun, Cédrick Favéro, Jean‐Philippe Letullier … and the list continues. A special thank you to my North American reviewing team: Ryan Wilton, Kimberley McEwen, and Matthew Hopkins. Finally, a big thank you to Cyrille Cizel for putting everything together and creating the illustrations. Tremendous work.
Introduction
The energy spectrum of the world has changed dramatically over the last 100 years. Production and utilization of oil, the many offshoot industries it has spawned, and the technological advances developed have literally transformed the world as we see it today. The ubiquitous perception of abundant energy is also slowly changing, as the internet has brought information regarding the geopolitics of energy front and center.
However, have you ever asked people around you – your family, your friends, people at the fitness center – what percentage of oil can be extracted from a reservoir on average? Or, better yet, have you ever discussed with them their understanding of a geologic reservoir? You would probably be surprised to learn how many people think hydrocarbons can be recovered using a straw planted in a big, dark cavern full of oil or gas, or by shooting a bullet into the ground and having black gold
bubble out. Moving from this fiction to reality requires education, science, time, and observation.
Moving hydrocarbons requires energy. The fossil fuels the world consumes on a daily basis are trapped in a porous material: an ancient, solid sponge formed by the accumulation of sediments over millions of years. What happens if you try to draw water from a sponge with a straw? It it slightly more difficult than simply pulling bulk fluid from a container. This same concept extends to hydrocarbon extraction.
Of the many available methods to produce hydrocarbon reserves, one involves water injection to sweep the oil toward producing wells. While widely deployed, this process (waterflooding) only helps recover approximately 35% of the oil contained in the giant sponges.
35%! Really? That's not much.
With 65% of the resource stranded in place, engineers and scientists have worked for decades to develop technical solutions to recover it. Enhanced oil recovery (EOR) technologies have been implemented in various fields around the world, always using a case‐by‐case approach. One such technique consists of injecting viscosified water into the formation to displace the oil, instead of regular water. The viscosity contrast between the injected water and the viscous oil creates instability and promotes water penetration through the oil or complete bypass of the oil via geological highways (i.e. where the sponge or reservoir has the largest connected pores, making the flow much more easily). Increasing the viscosity of the water through the addition of water‐soluble macromolecules (polymers) helps homogenize the displacement in the geologic formation: a larger volume of the sponge is contacted at the same time, leading to more efficient displacement and more oil being produced. This technique is called polymer flooding. It has been implemented since the late 1960s, with large commercial and technical success.
This book aims to summarize the key factors associated with polymers and polymer flooding – from the selection of the type of polymer through characterization techniques, to field design and implementation – discussing the main issues to consider when deploying this technology.
In an attempt to keep things simple, what follows is a pragmatic, rather than exhaustive, review of polymer flooding.
In terms of vocabulary, this is the last time you will read the word sponge; however, it is not the last time you will read the word viscosity!
Chapter one
Why Enhanced Oil Recovery?
Digital capture of a ship, a part of a reservoir system in a body of water.In this chapter, the different production stages of an oil‐bearing formation will be discussed with the goal of introducing enhanced oil recovery (EOR) techniques. Mainly, this chapter will discuss the common terminology used in the industry – which divides the life cycle of an asset into three stages (primary, secondary, and tertiary production) – to show the benefits of starting EOR techniques earlier in the development phase.
1.1. What Is a Reservoir?
The reservoir is an important component of a petroleum system. Oil and gas are formed from the decomposition of organic matter at high temperature and pressure in a source rock. Once formed, they can migrate upward until they either reach the surface and are degraded or are trapped by a seal or cap rock. If trapped, they tend to accumulate within a formation called a reservoir (Figure 1.1). Wells are drilled to reach this formation and start the extraction of the fluids.
Schematic diagram depicting petroleum system and oil-bearing reservoirs with parts labeled 1 to 7 and Gas; Oil; Water in colors and arrows for Migration.Figure 1.1 Petroleum system and oil‐bearing reservoirs.
A reservoir can be defined as subsurface rock formation having sufficient porosity and permeability to store and transmit fluids. Sedimentary rocks are the main formations of interest since they usually have higher porosity than magmatic and metamorphic rocks. Two categories are distinguished: clastic and carbonate rocks. Clastic rocks are formed from other existing rocks after erosion, transport, sedimentation, and burial. Carbonate rocks are mainly biogenic by origin: that is, they result from the accumulation of algae or microorganism remainders.
A good conventional reservoir is one with porosity and permeability high enough to allow the fluid to flow without much additional energy other than fluid expansion, reservoir compaction, or water injection.
Much attention has recently been directed toward so‐called unconventional reservoirs, where it is necessary to adapt the technique to extract the hydrocarbons. This is the case for low permeability (tight) reservoirs or source rocks (shale gas and oil), where multi‐stage, hydraulic fracturing is required to create paths to allow for more facile fluid drainage.
1.2. Hydrocarbon Recovery Mechanisms
Hydrocarbon production is commonly divided into three phases: primary, secondary, and tertiary (Figure 1.2).
Graph depicting Hydrocarbon recovery mechanisms with oil rate on the vertical axis, Time on the horizontal axis, and Primary, Tertiary, and Secondary curves with 5-15%, 20-40%, 40-70% OOIP.Figure 1.2 Hydrocarbon recovery mechanisms
Primary recovery simply refers to the volume of hydrocarbons produced due to the natural energy prevailing in the reservoir or through artificial lift (i.e. pumping) through a single well. Common mechanisms behind primary recovery are as follows:
Depletion drive
Gas cap drive
Gravity drainage
Rock and/or liquid expansion
Aquifer drive
The recovery factor at the end of this stage varies greatly depending upon reservoir and fluid characteristics. It can range from 5% to 40% or more in some cases. For heavy oil reservoirs or tight formations, the value is typically on the low end of this range.
Once the natural energy has been depleted, it is necessary to add energy to maintain or increase production levels to extract the remaining reserves. Thus, the secondary stage of recovery consists of introducing additional energy into the formation via one or several injection wells to drive or sweep the remaining fluids toward production wells. This secondary recovery process typically encompasses water or gas injections or the combination of both.
In the case of water injection, two main strategies may be implemented: (i) water injection for re‐pressurizing and revitalizing the reservoir energy, and (ii) repeating pattern of injectors and producers forming a waterflood.
The tertiary or enhanced recovery stage of development can be significantly increased, reaching 50–60% for the most favorable reservoirs. However, with worldwide recovery factors averaging 35%, the study of techniques to enhance recovery of the remaining 65% left inside the formation is justified. For cases where new reservoir development is undertaken, secondary recovery could be implemented as enhanced oil recovery processes if waterflooding is forgone for transition directly to an EOR process. This could include, for example, a reservoir that is produced on primary production for a short period, after which polymer flood or cyclic steam injection is directly applied.
1.2.1. Anecdote
Between 1965 and 1979, there were five documented attempts to stimulate the production from hydrocarbon reservoirs by detonating nuclear devices in reservoir strata [1]. Three tests were performed in the United States and two in Russia, both aiming at increasing production rates and ultimate recovery from reservoirs. Subsurface explosive devices from 2.3 to 100 kt were used at depths from 1200 to 2560 m, creating post‐shot problems: formation damage, radioactivity, creation of inflammable gases, and smaller‐than‐calculated fractured zones.
1.3. Definitions of IOR and EOR
Two acronyms are often encountered in the oil and gas industry when speaking about increasing the recovery of hydrocarbons: IOR for improved oil recovery and EOR for enhanced oil recovery [ ² 2 ]. IOR is a more general term, including any method toward increasing oil recovery (i.e. infill drilling, pressure support, operational and injection strategies, field redevelopment). EOR is usually considered a subset of IOR [3] and is often applied to reduce the oil saturation below the value obtained after waterflood, often referred to as the residual oil saturation (S or ) or, more specifically, residual oil saturation to waterflood (S orw ). Also, much interest has been focused on tertiary EOR. However, other definitions do not specifically tie this process to any specific production stage but rather include any method that can be used to increase the total recovery of any given field [4, 5].
1.4. What Controls Oil Recovery?
The efficiency of any recovery process can be defined by how much oil is contacted and displaced in a given reservoir (Figure 1.3). Recovery efficiency, E, is characterized as the product of two terms: (i) macroscopic sweep efficiency (mobilization at the reservoir scale, EV ) and (ii) microscopic sweep efficiency (mobilization at the pore scale, ED – also known as the displacement efficiency [4]).
Schematic diagrams depicting areal and vertical sweep efficiency parameters controlling oil recovery cross section and k1 to k2 proportions of swept and unswept.Figure 1.3 Areal and vertical sweep efficiency are parameters controlling oil recovery.
Macroscopic displacement efficiency relates to the volume of the reservoir contacted by the displacing fluid and is typically subdivided into areal and vertical macroscopic sweep efficiencies. This value is impacted by reservoir characteristics (geology, heterogeneities, fractures) and by fluid properties (viscosity, density). For example, it can be improved by maintaining a favorable mobility ratio between the displacing and displaced fluids by adding polymers to viscosify the injected water. This will be discussed in depth in subsequent chapters.
Microscopic displacement efficiency depends on the physical and chemical interactions that occur between the displacing fluid and oil. These include miscibility, wettability, and interfacial tension, which can be changed by adding specific additives to the injected fluid to dislodge the oil from the porous medium.
Equations (1.1) through (1.3) show the relationship and definition of all three efficiencies. ED and EV are typically expressed as fractions.
(1.1) equation
(1.2)
equation(1.3) equation
where S oi , S o , and S or are the initial oil saturation, oil saturation at time t, and residual oil saturation, respectively. Similarly, the initial and current oil formation volume factors, B oi and B o , represent the volume correction for expansion when fluids are brought to the surface. The terms Vp and Npwf refer to the pore volume (void space containing fluids) and volume of oil recovered during waterflood, respectively.
It is obviously desirable for any EOR process that the