Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Discover millions of ebooks, audiobooks, and so much more with a free trial

From $11.99/month after trial. Cancel anytime.

On the Construction of a Silvered Glass Telescope: Fifteen and a half inches in aperture, and its use in celestial photography
On the Construction of a Silvered Glass Telescope: Fifteen and a half inches in aperture, and its use in celestial photography
On the Construction of a Silvered Glass Telescope: Fifteen and a half inches in aperture, and its use in celestial photography
Ebook135 pages1 hour

On the Construction of a Silvered Glass Telescope: Fifteen and a half inches in aperture, and its use in celestial photography

Rating: 0 out of 5 stars

()

Read preview

About this ebook

On the Construction of a Silvered Glass Telescope is a series of articles by Henry Draper. Written for The Smithsonian Institute of Science, it delves into the in and outs of practical celestial photography.
LanguageEnglish
PublisherGood Press
Release dateDec 6, 2019
ISBN4064066232696
On the Construction of a Silvered Glass Telescope: Fifteen and a half inches in aperture, and its use in celestial photography

Related to On the Construction of a Silvered Glass Telescope

Related ebooks

Photography For You

View More

Related articles

Reviews for On the Construction of a Silvered Glass Telescope

Rating: 0 out of 5 stars
0 ratings

0 ratings0 reviews

What did you think?

Tap to rate

Review must be at least 10 words

    Book preview

    On the Construction of a Silvered Glass Telescope - Henry Draper

    Henry Draper

    On the Construction of a Silvered Glass Telescope

    Fifteen and a half inches in aperture, and its use in celestial photography

    Published by Good Press, 2019

    goodpress@okpublishing.info

    EAN 4064066232696

    Table of Contents

    AN ACCOUNT OF THE CONSTRUCTION AND USE OF A SILVERED GLASS TELESCOPE.

    §1. GRINDING AND POLISHING THE MIRRORS.

    §2. THE TELESCOPE MOUNTING.

    §3. THE CLOCK MOVEMENT.

    §4. THE OBSERVATORY.

    §5. THE PHOTOGRAPHIC LABORATORY.

    §6. THE PHOTOGRAPHIC ENLARGER.


    HISTORICAL SKETCH OF THE TELESCOPE. MEMOIR DIVIDED INTO SIX SECTIONS:—


    AN ACCOUNT

    OF

    THE CONSTRUCTION AND USE OF A SILVERED GLASS TELESCOPE.

    Table of Contents

    The construction of a reflecting telescope capable of showing every celestial object now known, is not a very difficult task. It demands principally perseverance and careful observation of minutiæ. The cost of materials is but trifling compared with the result obtained, and I can see no reason why silvered glass instruments should not come into general use among amateurs. The future hopes of Astronomy lie in the multitude of observers, and in the concentration of the action of many minds. If what is written here should aid in the advance of that noble study, I shall feel amply repaid for my labor.

    A short historical sketch of this telescope may not be uninteresting. In the summer of 1857, I visited Lord Rosse’s great reflector, at Parsonstown, and, in addition to an inspection of the machinery for grinding and polishing, had an opportunity of seeing several celestial objects through it. On returning home, in 1858, I determined to construct a similar, though smaller instrument; which, however, should be larger than any in America, and be especially adapted for photography. Accordingly, in September of that year, a 15 inch speculum was cast, and a machine to work it made. In 1860, the observatory was built, by the village carpenter, from my own designs, at my father’s country seat, and the telescope with its metal speculum mounted. This latter was, however, soon after abandoned, and silvered glass adopted. During 1861, the difficulties of grinding and polishing that are detailed in this account were met with, and the remedies for many of them ascertained. The experiments were conducted by the aid of three

    15

    1

    2

    inch disks of glass, together with a variety of smaller pieces. Three mirrors of the same focal length and aperture are almost essential, for it not infrequently happens that two in succession will be so similar, that a third is required for attempting an advance beyond them. One of these was made to acquire a parabolic figure, and bore a power of 1,000. The winter was devoted to perfecting the art of silvering, and to the study of special photographic processes. A large portion of 1862 was spent with a regiment in a campaign in Virginia, and but few photographs were produced till autumn, when sand clocks and clepsydras of several kinds having been made, the driving mechanism attained great excellence. During the winter, the art of local corrections was acquired, and two

    15

    1

    2

    inch mirrors, as well as two of 9 inches for the photographic enlarging apparatus, were completed. The greater part of 1863 has been occupied by lunar and planetary photography, and the enlargement of the small negatives obtained at the focus of the great reflector. Lunar negatives have been produced which have been magnified to 3 feet in diameter. I have also finished two mirrors

    15

    1

    2

    inches in aperture, suitable for a Herschelian telescope, that is, which can only converge oblique pencils to a focus free from aberration. This work has all been accomplished in the intervals of professional labor.

    The details of the preceding operations are arranged as follows: §1.

    Grinding and Polishing the Mirrors

    ; §2.

    The Telescope Mounting

    ; §3.

    The Clock Movement

    ; §4.

    The Observatory

    ; §5.

    The Photographic Laboratory

    ; §6.

    The Photographic Enlarger

    .

    §1. GRINDING AND POLISHING THE MIRRORS.

    Table of Contents

    (1.)

    Experiments on a Metal Speculum.

    My first 15 inch speculum was an alloy of copper and tin, in the proportions given by Lord Rosse. His general directions were closely followed, and the casting was very fine, free from pores, and of silvery whiteness. It was 2 inches thick, weighed 110 pounds, and was intended to be of 12 feet focal length. The grinding and polishing were conducted with the Rosse machine. Although a great amount of time was spent in various trials, extending over more than a year, a fine figure was never obtained—the principal obstacle to success being a tendency to polish in rings of different focal length. It must, however, be borne in mind that Lord Rosse had so thoroughly mastered the peculiarities of his machine as to produce with it the largest specula ever made and of very fine figure.

    During these experiments there was occasion to grind out some imperfections,

    8

    100

    of an inch deep, from the face of the metal. This operation was greatly assisted by stopping up the defects with a thick alcoholic solution of Canada balsam, and having made a rim of wax around the edge of the mirror, pouring on nitro-hydrochloric acid, which quickly corroded away the uncovered spaces. Subsequently an increase in focal length of 15 inches was accomplished, by attacking the edge zones of the surface with the acid in graduated depths.

    An attempt also was made to assist the tedious grinding operation by including the grinder and mirror in a Voltaic circuit, making the speculum the positive pole. By decomposing acidulated water between it and the grinder, and thereby oxidizing the tin and copper of the speculum, the operation was much facilitated, but the battery surface required was too great for common use. If a sufficient intensity was given to the current, speculum metal was transferred without oxidation to the grinder, and deposited in thin layers upon it. It was proposed at one time to make use of this fact, and coat a mirror of brass with a layer of speculum metal by electrotyping. The gain in lightness would be considerable.

    During the winter of 1860 the speculum was split into two pieces, by the expansion in freezing of a few drops of water that had found their way into the supporting case.

    (2.) Silvering Glass.

    At Sir John Herschel’s suggestion (given on the occasion of a

    Enjoying the preview?
    Page 1 of 1