Electrician's Exam Study Guide 2/E
()
About this ebook
Featuring more than 1,500 practice questions and answers, Electrician’s Exam Study Guide, Second Edition provides everything you need to prepare for and pass the Journeyman and Master electrician licensing exams on the first try. This practical, up-to-date resource is filled with detailed illustrations, Test Tips which explain how to arrive at the correct answers, and Code Updates which clarify changes in the 2011 NEC. Answer sheets include cross-references to the precise article and section of the NEC from which questions are taken. Fully revised throughout, this careerbuilding guide helps you:
- Master the material most likely to appear on the licensing exams
- Improve your test-taking ability with 1,500+ true/false and multiple-choice questions and answers
- Keep up with the 2011 NEC
- Acquire the confidence, skills, and knowledge needed to pass your exam
Covers essential topics, including:
- Articles 90 through 110
- Wiring requirements and protection
- Wiring methods and materials
- Equipment for general use
- Special occupancies and classifications
- Special equipment
- Special conditions
- Communications
- Tables, annexes, and examples
- Math calculations and basic electrical theory
- Review and applying principles
- Master electrician skills
- Techniques for studying and taking your test
Related to Electrician's Exam Study Guide 2/E
Related ebooks
Journeyman Electrician: Passbooks Study Guide Rating: 0 out of 5 stars0 ratingsThe Electrician's Trade Demystified Rating: 0 out of 5 stars0 ratingsElectrician's Pocket Manual Rating: 0 out of 5 stars0 ratingsElectrician's Troubleshooting and Testing Pocket Guide, Third Edition Rating: 5 out of 5 stars5/5National Electrical Code Second Edition Rating: 0 out of 5 stars0 ratingsTeach Yourself Electricity and Electronics, 6th Edition Rating: 4 out of 5 stars4/5Electrical Contractor: Passbooks Study Guide Rating: 0 out of 5 stars0 ratingsElectricity and Electronics for HVAC Rating: 0 out of 5 stars0 ratingsHvac & R Hands on Troubleshooting Rating: 3 out of 5 stars3/5HVAC Troubleshooting Guide Rating: 0 out of 5 stars0 ratingsThe Homeowner's DIY Guide to Electrical Wiring Rating: 5 out of 5 stars5/5Beginner's Guide to Reading Schematics, Third Edition Rating: 0 out of 5 stars0 ratingsElectrical Rating: 4 out of 5 stars4/5Electrician''s Guide to Control and Monitoring Systems: Installation, Troubleshooting, and Maintenance Rating: 0 out of 5 stars0 ratingsElectronics Demystified, Second Edition Rating: 4 out of 5 stars4/5Plumber's Licensing Study Guide, Third Edition Rating: 0 out of 5 stars0 ratingsBeginner's Guide to Reading Schematics, Fourth Edition Rating: 4 out of 5 stars4/5Troubleshooting and Repairing Major Appliances Rating: 5 out of 5 stars5/5Schaum's Outline of Electric Circuits, seventh edition Rating: 0 out of 5 stars0 ratingsBuild Your Own Electronics Workshop Rating: 4 out of 5 stars4/5Electronic Circuits for the Evil Genius 2/E Rating: 0 out of 5 stars0 ratingsElectricity Experiments You Can Do At Home Rating: 5 out of 5 stars5/5Electricity Demystified, Second Edition Rating: 2 out of 5 stars2/5Hacking Electronics: An Illustrated DIY Guide for Makers and Hobbyists Rating: 4 out of 5 stars4/5Small Gas Engine Repair Rating: 4 out of 5 stars4/5Home Generator Selection, Installation and Repair Rating: 0 out of 5 stars0 ratingsCDL - Commercial Driver's License Exam, 2024-2025: Complete Prep for the Truck & Bus Driver's License Exams Rating: 3 out of 5 stars3/5Practical Electronic Design for Experimenters Rating: 0 out of 5 stars0 ratingsSchaum's Outline of Software Engineering Rating: 0 out of 5 stars0 ratingsComplete Book of Home Inspection 4/E Rating: 0 out of 5 stars0 ratings
Technology & Engineering For You
Vanderbilt: The Rise and Fall of an American Dynasty Rating: 4 out of 5 stars4/5The Art of War Rating: 4 out of 5 stars4/5The Art of War Rating: 4 out of 5 stars4/5The Big Book of Maker Skills: Tools & Techniques for Building Great Tech Projects Rating: 4 out of 5 stars4/5Mother of God: An Extraordinary Journey into the Uncharted Tributaries of the Western Amazon Rating: 4 out of 5 stars4/5The Big Book of Hacks: 264 Amazing DIY Tech Projects Rating: 4 out of 5 stars4/5Ultralearning: Master Hard Skills, Outsmart the Competition, and Accelerate Your Career Rating: 4 out of 5 stars4/5The Invisible Rainbow: A History of Electricity and Life Rating: 5 out of 5 stars5/5A Night to Remember: The Sinking of the Titanic Rating: 4 out of 5 stars4/5The 48 Laws of Power in Practice: The 3 Most Powerful Laws & The 4 Indispensable Power Principles Rating: 5 out of 5 stars5/5Longitude: The True Story of a Lone Genius Who Solved the Greatest Scientific Problem of His Time Rating: 4 out of 5 stars4/5The CIA Lockpicking Manual Rating: 5 out of 5 stars5/5A History of the American People Rating: 4 out of 5 stars4/580/20 Principle: The Secret to Working Less and Making More Rating: 5 out of 5 stars5/5The Wuhan Cover-Up: And the Terrifying Bioweapons Arms Race Rating: 5 out of 5 stars5/5Summary of Nicolas Cole's The Art and Business of Online Writing Rating: 4 out of 5 stars4/5The Fast Track to Your Technician Class Ham Radio License: For Exams July 1, 2022 - June 30, 2026 Rating: 5 out of 5 stars5/5The Systems Thinker: Essential Thinking Skills For Solving Problems, Managing Chaos, Rating: 4 out of 5 stars4/5After the Affair, Third Edition: Healing the Pain and Rebuilding Trust When a Partner Has Been Unfaithful Rating: 4 out of 5 stars4/5Artificial Intelligence: A Guide for Thinking Humans Rating: 4 out of 5 stars4/5Ghost Rider: Travels on the Healing Road Rating: 4 out of 5 stars4/5Selfie: How We Became So Self-Obsessed and What It's Doing to Us Rating: 4 out of 5 stars4/5Smart Phone Dumb Phone: Free Yourself from Digital Addiction Rating: 0 out of 5 stars0 ratingsThe Total Motorcycling Manual: 291 Essential Skills Rating: 5 out of 5 stars5/5Broken Money: Why Our Financial System is Failing Us and How We Can Make it Better Rating: 5 out of 5 stars5/5Basic Engineering Mechanics Explained, Volume 1: Principles and Static Forces Rating: 5 out of 5 stars5/5
Reviews for Electrician's Exam Study Guide 2/E
0 ratings0 reviews
Book preview
Electrician's Exam Study Guide 2/E - Kimberley Keller
About the Author
K. J. KELLER is an associate engineer and electrical specialist with the largest international marine contractor on the East Coast, experienced in Lean Six Sigma initiatives and electrical engineering and design methods. Previous experience includes serving as the safety and compliance director, trainer, and project coordinator for one of New England’s most prominent electrical contractors.
Copyright © 2013, 2007 by The McGraw-Hill Companies, Inc. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher.
ISBN: 978-0-07-179203-5
MHID: 0-07-179203-1
The material in this eBook also appears in the print version of this title: ISBN: 978-0-07-179204-2, MHID: 0-07-179204-X.
All trademarks are trademarks of their respective owners. Rather than put a trademark symbol after every occurrence of a trademarked name, we use names in an editorial fashion only, and to the benefit of the trademark owner, with no intention of infringement of the trademark. Where such designations appear in this book, they have been printed with initial caps.
McGraw-Hill eBooks are available at special quantity discounts to use as premiums and sales promotions, or for use in corporate training programs. To contact a representative please e-mail us at bulksales@mcgraw-hill.com.
Information contained in this work has been obtained by The McGraw-Hill Companies, Inc. (McGraw-Hill
) from sources believed to be reliable. However, neither McGraw-Hill nor its authors guarantee the accuracy or completeness of any information published herein, and neither McGraw-Hill nor its authors shall be responsible for any errors, omissions, or damages arising out of use of this information. This work is published with the understanding that McGraw-Hill and its authors are supplying information but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought.
TERMS OF USE
This is a copyrighted work and The McGraw-Hill Companies, Inc. (McGraw-Hill
) and its licensors reserve all rights in and to the work. Use of this work is subject to these terms. Except as permitted under the Copyright Act of 1976 and the right to store and retrieve one copy of the work, you may not decompile, disassemble, reverse engineer, reproduce, modify, create derivative works based upon, transmit, distribute, disseminate, sell, publish or sublicense the work or any part of it without McGraw-Hill’s prior consent. You may use the work for your own noncommercial and personal use; any other use of the work is strictly prohibited. Your right to use the work may be terminated if you fail to comply with these terms.
THE WORK IS PROVIDED AS IS.
McGRAW-HILL AND ITS LICENSORS MAKE NO GUARANTEES OR WARRANTIES AS TO THE ACCURACY, ADEQUACY OR COMPLETENESS OF OR RESULTS TO BE OBTAINED FROM USING THE WORK, INCLUDING ANY INFORMATION THAT CAN BE ACCESSED THROUGH THE WORK VIA HYPERLINK OR OTHERWISE, AND EXPRESSLY DISCLAIM ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. McGraw-Hill and its licensors do not warrant or guarantee that the functions contained in the work will meet your requirements or that its operation will be uninterrupted or error free. Neither McGraw-Hill nor its licensors shall be liable to you or anyone else for any inaccuracy, error or omission, regardless of cause, in the work or for any damages resulting therefrom. McGraw-Hill has no responsibility for the content of any information accessed through the work. Under no circumstances shall McGraw-Hill and/or its licensors be liable for any indirect, incidental, special, punitive, consequential or similar damages that result from the use of or inability to use the work, even if any of them has been advised of the possibility of such damages. This limitation of liability shall apply to any claim or cause whatsoever whether such claim or cause arises in contract, tort or otherwise.
I would like to dedicate this book in loving memory of my mother, Joy P. Wallace and my father, Robert (Bob) Wallace. They were the source of my creativity, engineering prowess, determination, and writing skills. I would also like to thank my children, Afton and Adam, and my little grandson, Giovanni, for bringing light to my life every day.
Contents
Preface
Acknowledgments
Understanding the NEC®
Chapter 1 ARTICLES 90 THROUGH 110
Quiz 1—Articles 90 and 100
Quiz 2—Article 110
Quiz 3—True/False
Answers
Chapter 2 WIRING REQUIREMENTS AND PROTECTION
Quiz 1—Principles-Article 200
Quiz 2—Review-Article 200
Quiz 3—True/False
Quiz 4—Multiple Choice
Answers
Chapter 3 WIRING METHODS AND MATERIALS
Quiz 1—Article 300
Quiz 2—Comprehensive Test-NEC® Chapters 1 through 3
Quiz 3—True/False
Quiz 4—Multiple Choice
Answers
Chapter 4 EQUIPMENT FOR GENERAL USE
Quiz 1—Article 400
Answers
Chapter 5 SPECIAL OCCUPANCIES AND CLASSIFICATIONS
Quiz 1
Quiz 2—Classifications
Answers
Chapter 6 SPECIAL EQUIPMENT
Quiz 1
Quiz 2
Answers
Chapter 7 SPECIAL CONDITIONS
Quiz 1
Quiz 2
Answers
Chapter 8 COMMUNICATIONS
Quiz 1
Quiz 2
Answers
Chapter 9 TABLES, ANNEXES, AND EXAMPLES
Quiz 1—Review
Quiz 2
Quiz 3
Answers
Chapter 10 MATH CALCULATIONS AND BASIC ELECTRICAL THEORY
Timed Math Test
Answers
Chapter 11 REVIEW AND APPLYING PRINCIPLES
Quiz 1—Basic Electrical Principles
Answers
Chapter 12 MASTER ELECTRICIAN SKILLS
Master Level Quiz
Answers
Chapter 13 TIMED TEST 1
Timed Test 1
Answers
Chapter 14 TIMED TEST 2
Timed Test 2
Answers
Chapter 15 TIMED TEST 3
Timed Test 3
Answers
Chapter 16 CLOSED-BOOK EXAM
Closed-Book Exam
Answers
Chapter 17 TECHNIQUES FOR STUDYING AND TAKING YOUR TEST
Studying for the Exam
Taking Your Exam
Index
Preface
This book has been written for experienced electricians who plan to take a state required exam in order to obtain a Journeyman or Master Electrician’s license. We are going on the assumption that you are entering this phase of your career with a basic understanding of the electrical trade and electrical theory. One thing you need to know before you take your licensing exam is that your hands-on experience in the field will not be enough to get you a passing grade.
Many of the questions on licensing exams are based on the National Electrical Code®, so you will need to have a current NEC® book to study and use for reference. Some states will allow you to refer to your code book during the test, while others give no book
or closed book
exams. Test centers which allow open book exams will only permit you to bring your NEC® code book, even though a percentage of the test questions will be on electrical theory, controls and other principals used in the safe installation of electrical work. All of the tests are timed and require a testing fee. We know your time and money are valuable, so our goal is to provide you with the study tools, references, and examples you will need to thoroughly prepare yourself to pass your licensing exam.
There are over 1,500 sample test questions presented in this book in a manner which closely resembles the types of questions you may find on the licensing exam. There are true/false and multiple-choice questions, just like on the real test. In order to increase your understanding of the questions, there are answer sheets which include cross-references to the precise article and section of the NEC® from which the question is taken.
The text material at the beginning of each chapter also explains applicable articles and requirements in a manner which makes even the most complicated code standards easier to understand.
There are numerous Test Tips throughout the book which explain how to arrive at the correct answers. Additionally, there are Code Updates in each chapter which clarify changes in the 2011 NEC®, so that you can be certain that the material you are studying is current and accurate. The NEC® covers specialized installation requirements, many of which you may not have performed as an electrician, such as working in hazardous locations, or wiring for hospitals or low-voltage communications systems. Lack of trade experience can be compensated for by studying the NEC® and by taking mock exams. That’s why there are practice exams at the end of the book, so that you can get a feel for the type of material you might expect to find when you take your actual licensing exam.
The purpose of this book is to help you develop your ability to understand how licensing exam questions may be written, which standards apply, and how to arrive at the most correct answers in order to receive a passing grade.
K. J. Keller
Acknowledgments
I would like to thank the National Fire Protection Association for permission to reference the NEC® standards and for allowing us to reprint materials from the National Electrical Code® book for the benefit of our readers.
National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Inc., Quincy, MA 02169.
I would also like to acknowledge Wolf Pack Publishing for its supportive efforts in the revision of this book.
Understanding the NEC®
When you started working in the electrical industry, all you probably had to do was apply for a helper or associate license and pay a minimal fee to process the application. Now you have worked for thousands of hours and have acquired extensive hands-on experience. You are ready to move up to the next level and become a journeyman electrician, or perhaps it’s time for you to go into business for yourself and become a master electrician. The first thing you need to do is to contact your state licensing organization and determine the requirements for licensure in your area. Only Illinois, Indiana, Kansas, Kentucky, Missouri, New York, and Pennsylvania do not expect you be licensed at the state level. Most states require that you have completed a specific number of hours of service as an apprentice and some form of study program. Often this means that you cannot even consider getting your license unless you have at least 8000 hours of documented experience and that you have satisfactorily completed a 45-hour current National Electric Code® course. Many locations require completion of state-approved trade-related courses with 225 or more credit hours or graduation from an accredited regional vocational program. Finally, almost every state in the country requires that you take and pass a written test in order to be licensed to perform electrical work without supervision. This test is composed of questions taken directly from the National Electrical Code®.
The National Fire Protection Association, Inc., known by the acronym NFPA®, develops and publishes the National Electrical Code® (NEC®), which is a compilation of codes and standards for the International Electrical Code. Each section of the NEC® falls under NFPA® 70 and has been developed through a committee process to establish standards for electrical installations to reduce the risk of hazards. The National Electrical Code® is set up by articles that categorize general areas of electrical work, and each article is subdivided into sections that detail standards for specific aspects of that work.
All of the written licensing tests are timed, based on the NEC® codes, and many allow you three hours to complete the questions. The daunting reality is that there are forty-one articles and over 714 pages of code. It would be unrealistic to expect anyone to memorize every article, section, and subsection of the NEC®. Many states allow open-book license testing with very strict guidelines. For example, you can only bring a hardcover version of the NEC® without any tabs or loose papers. This means you can’t bring a list of articles or page numbers or any other form of quick reference. Obviously, you don’t want to spend any more time than absolutely necessary flipping through your code book searching for answers. You won’t be asked to list an article or section on the test—only to know how the code is represented in each question. The exam will be broken down in the following categories:
1. Grounding and bonding
• System and circuit grounding requirements
• Grounding methods and locations
• Proper sizing of grounding conductors
• Bonding enclosure sizing
• Equipment and metal-piping-system requirements
2. Services, feeders, branch circuits, and overcurrent protection
• Electrical loads
• Proper size and type of service and feeder conductors and ratings
• Installation of panel boards, switchboards, and overcurrent devices
• Circuit requirements and applications
• Electrical outlets, devices, wire connectors, and methods
3. Raceways
• Types of raceways and uses
• Proper sizing of conductor fill, supports, and installation methods
• Type, use, and support methods of boxes, cabinets, etc.
4. Conductors
• Determination of amperage
• Type of insulation
• Conductor-usage requirements
• Methods of installation, protection support, and termination
5. Motors and Controls
• Installation of generators, motors, and controls
• Calculations for motor feeders and branch circuits
• Short-circuit, ground-fault, and overload protection
• Proper means of disconnection
• Control-circuit requirements
• Motor types, applications, and uses
6. General-Use Equipment
• Lighting and appliances
• Heating and air-conditioning equipment
• Generators, transformers, etc.
7. Special Occupancies and Equipment
• Hazardous locations
• Health-care facilities, places of assembly, etc.
• Signs, welders, industrial machinery, swimming pools, etc.
8. General Knowledge of Electrical Trade and Calculations
• Terminology
• Practical calculations including load computations and voltage drop
• Conductor derating
• Power factors
• Current ratings of equipment
• Branch circuit calculations
9. Alarm, Communication, and Low-Voltage Circuits
• Circuits and equipment under 50 volts
• Signal alarm systems and sound systems
The first four chapters of the NEC® include general electrical standards that apply to all installations. Chapters 5, 6, and 7 cover special applications such as special occupancy, special equipment, and special conditions. Chapter 8 covers communication systems that are not included in the first seven chapters. The last chapter includes reference tables. The Annex section, which follows Chapter 9, provides more tables that illustrate conditions such as ampacity calculations, conduit and tubing fill for conductors and fixture wires, as well as special conditions for single-family dwellings and industrial applications to park trailers. These examples are particularly helpful, because each case references the applicable code article and section.
Your challenge in preparing to pass the electrical examination will be to gain a clear and basic understanding of the NEC®. If you are taking an open-book exam, you will need to know how to quickly locate areas in the NEC® book that you might need to access for a specific standard so that you can choose the correct answer to the test question. As you go through this workbook, you will have the opportunity to review each code by chapter and test your knowledge of the related codes. Answer sheets for the tests and quizzes provide a reference for each answer so that you can go back over material that you missed.
This is your opportunity to pinpoint your strengths and weaknesses and to improve your knowledge base and test-taking skills. No one wants to take the licensing exam more than once or wait for the next testing date. These are just some of the reasons why this book may prove to be the most valuable tool you own right now. Unlike your wire cutters or your ohmmeter, this tool can help you to get licensed, supervise projects, bid your own work, and earn a higher wage. So what are you waiting for—let’s get started.
Chapter 1
ARTICLES 90
THROUGH 110
Electrician’s Exam Study Guide
Let’s start with the easiest parts of the —the fist two articles. Article 90 of the is a basic introduction to intention of the codes. Essentially it describes the purpose of the National Electrical Code, which is to provide uniform and practical means to safeguard people and equipment from electrical hazards. These safety guidelines are not meant to describe the most convenient or efficient installations and don’t even guarantee good service or allow for future expansion. They are merely designed to provide a standard for safety that protects against electrical shock and thermal effects, as well as dangerous overcurrents, fault currents, and overvoltage. The parallels the principles for safety covered in Section 131 of the International Electrotechnical Commission Standard for electrical installations for buildings. The is divided into nine chapters as illustrated in Figure 1.1. This organization builds on the fundamentals in a logical and sequential manner, as you can see in the illustration.
Article 90 provides for special permission from the Authority Having Jurisdiction (AHJ) to grant exception for the installation of conductors and equipment that are outside of a building or that terminate immediately inside a building wall. The AHJ can also waive certain requirements of the code or may allow alternative methods as long as these alternatives ensure effective safety. Other than these provisions for exception, the code is intended to be a standard that government bodies can enforce. Some of the rules are mandatory; these can be identified by the terms shall or shall not. Other rules describe actions that are allowed but are not mandatory; these are characterized by the terms shall be permitted or shall not be required. One of the first changes in the 2011 code is that the familiar term fine print notes (FPNs) has been removed throughout the code and and has been replaced with the term Informational Notes. Technically, the term fine print refers to a type size rather than items of an advisory nature. The contains notes that are requirements of the code, such as table notes. The change to 90.5(C) makes the advisory nature of the code notations clear.
FIGURE 1.1 codes ascend in a logical manner, building up from the most fundamental aspects to more complex and specialized installations.
The rest of Article 90 covers wiring planning in general terms. It explains that metric units of measurement (SI) are listed first with inch-pound units following and that trade practices are used in trade sizing. There were a number of wording changes to Articles 90 and 100 in the 2011 . These alterations are incorporated into the various Code Update courses offered around the country and are included on the licensing exam. Once you have your license, it may be necessary for you to take periodic update programs in order to renew your license and to keep current on the most recent code requirements. Several of the changes to Articles 90 and 100 are listed for you in this chapter.
Code update SECTION 90.2(B)(5)
This section was revised to clarify the utility installations that are outside the scope of the . New text was added to specify which types of installations can be included under other electrical agreements.
Code update SECTION 90.2(C)
This section was changed to explain that the conductors and equipment that can be exempted by special permission are those that connect to the service conductors. Also clarifies that the exempted conductors may extend into a building or structure to the nearest point of entrance of the service conductors.
Code update SECTION 90.5(C)
The term fine print notes (FPNs) has been removed throughout the code and replaced with Informational Notes.
Code update SECTION 90.5(D)
Informative Annexes have been added in the back of the . Informative annexes are not part of the enforceable requirements of the but are included for information purposes only.
Test tip
Both metric units and our own units of measure are used in the . In the 2011 edition, the units shown in regular text are metric, and our English units follow in parentheses.
Chapter One of the begins with Article 100, which is an alphabetical listing of definitions that are key to the proper application of the code. Some of these definitions are simple enough. For example, Dwelling, One-Family
is described as a building that consists solely of one dwelling unit.
Many of the descriptions are written in more complex terms. An outlet, for example, is defined as a point on the wiring system at which current is taken to supply utilization equipment.
A power outlet
is an enclosed assembly that may include receptacles, circuit breakers, fuseholders, fused switches, buses, and watt-hour meter mounting means; intended to supply and control power to mobile homes, recreational vehicles, park trailers, or boats or to serve as a means for distributing power required to operate mobile or temporarily installed equipment.
What did that just say? You’ve worked in the electrical industry for quite a while. Is that how you would have described a power outlet? If you had been given that definition and the choice of Outlet, Power Outlet, and Receptacle, would you know which answer was correct?
There are several keys to unlock such difficult definitions. First, look for key words within the definition. In the Power Outlet
example above, you can see that the item described can include receptacles. You immediately know the answer is not Receptacle
because the definition will not use the name of the device to describe itself. This step reduces your possible answers to two. At this point, you could either guess at the correct choice, knowing you have a fifty-fifty chance of getting the right answer, or you could look for more clues in the description. When you look at the definition again, you’ll see that this item is intended to supply and control power
and to distribute power.
This makes it clear that power is an essential part of the answer; therefore, Power Outlet
makes the most sense. Of course, if it’s an open-book exam, you could grab your book and flip to the definition section in Article 100 to look up the answer, but whenever possible, try not to use up valuable time going through your code book. Use your powers of reason and deduction first, and save your code book for the really complex subjects so that you do not run out of test time.
Test tip
One of the sections on the exam covers General Knowledge of Electrical Trade and Calculations—Terminology. Article 100 is an alphabetical listing of electrical terms and definitions.
Another essential key to passing your exam is to remember that terms are not interchangeable and they mean different things. We learned in elementary school that the word read
means two different things depending on how it is used in the sentence. You can read this book, and once you’ve finished, you have read the book. Article 100 has similar occurrences. For instance, what is the difference between a grounded conductor and a grounding conductor? These two terms are often used synonymously, but the defines them in completely different ways. A grounded conductor is a circuit conductor that is intentionally grounded. A grounding conductor is used to connect equipment or a grounded circuit to a grounding electrode. Knowing that there is difference between the two terms, and what that variation is, will be the difference between getting an answer correct and having it count towards your final score and answering a question wrong and having it basically mean nothing. Several code definitions were modified in the 2011 edition. Knowing these changes will make the difference between a right and wrong answer. For example, the 2011 defines Ampacity
as follows: the maximum current, in amperes, that a conductor can carry continuously under the conditions of use without exceeding its temperature rating. The change is that the word maximum has been added.
As you study, try to keep a couple of things in mind. First of all, the exam is multiple choice. Some questions may be True/False, while others will list several answer options. The example of the Power Outlet above might make you think that the exam is written to intentionally confuse you, but it isn’t. The uses expert-level, specialized vernacular, and so the exam questions may seem complicated and hard to understand. Bear in mind that the is not just used by electricians. Electrical inspectors, engineers, designers, and architects also use the standards established in the NEC. You may need to read the question carefully before you can understand the meaning of the question and determine which answer option is the most correct. If you need to, circle key words or values in the example so that you can break the question down into clearer components.
FIGURE 1.2 Diagram—solidly grounded conductor.
Code update ARTICLE 100 – DEFINITIONS
Ampacity: The definition was revised to indicate it is the maximum current that can be carried continuously.
The next thing to consider is that only the correct answers count towards your score, and incorrect answers don’t count against you. This means it is in your best interest to answer every question. Obviously you want to answer as many questions correctly as possible because in most cases you will have to get a minimum score of 70% to receive a passing grade. Each chapter of this book includes a Quick Quiz or sample test on the sections covered in the chapter so that you can assess not only your knowledge of the material, but also your ability to achieve a high percentage of correct answers. You will find Test Tips throughout the book to help you decipher questions which may seem complicated or just plain tricky, and Code References have been included in the answer sections so that you can go directly to the for a clearer understanding of test answers. Your overall goal is to increase the number of correct answers you score by combining your knowledge, skills, and ability to arrive at the most correct answer during a test.
Code update ARTICLE 100 – DEFINITIONS
Bathroom: The definition has been expanded by adding a list of additional plumbing fixtures which, in combination with a basin, constitute a bathroom. *See the underlined fixtures in the following revised list: a toilet, a urinal, a tub, a shower, a foot bath, a bidet, or similar plumbing fixtures.
Code update ARTICLE 100 – DEFINITIONS
Bonding jumper, system: The definition has been relocated from Article 250 and revised to clarify the function of the bonding jumper by adding a reference to the supply-side bonding jumper as follows: the connection between the grounded circuit conductor and the supply-side bonding jumper, or the equipment grounding conductor, or both, at a separately derived system.
Test tip
Be careful to understand the difference between simple word changes in the Code. For example, the definition of Interrupting Rating
was revised by replacing the word intended with identified, which changes it significantly to the highest current at rated voltage that a device is identified to interrupt.
Code update ARTICLE 100 – DEFINITIONS
Grounding conductor: This term was defined in the 2008 as: A conductor used to connect equipment or the grounded circuit of a wiring system to a grounding electrode or electrodes. The definition was deleted in the 2011 edition because a grounding conductor as used in the 2008 was the same thing as a grounding electrode conductor or a bonding conductor.
Code update ARTICLE 100 – DEFINITIONS
Kitchen: The definition was revised by replacing the term facilities with provisions.
Code update ARTICLE 100 – DEFINITIONS
Overcurrent protective device, supplementary: This definition editorially revised for usability by making two important distinctions between over-current protective devices. First, the use of a supplementary device is specifically limited to a listed few applications. Second, when used, supplementary devices must be in addition to and be protected by branch-circuit overcurrent protective devices.
Code update ARTICLE 100 – DEFINITIONS
Separately derived system: This definition revised to clarify that a separately derived system may have some incidental connections to other systems, such as through metal raceways, the earth, or equipment grounding conductors. Examples of separately derived systems include generators, batteries, converter windings, transformers, and solar photovoltaic systems, provided they do not have a direct electrical connection to another source.
Code update ARTICLE 100 – DEFINITIONS
Service conductors, overhead: This is a new term added for what was formerly known as service-drop conductors. This term distinguishes overhead service conductors that are part of the premises wiring system from the overhead conductors that are on the line side of the service point.
Code update ARTICLE 100 – DEFINITIONS
Service conductors, underground: This is a new term added for what was formerly known as service-lateral conductors. The definition more clearly describes the beginning and ending points of underground service conductors and distinguishes underground service conductors that are part of the premises wiring system from the underground service conductors that are on the line side of the service point. An Informational Note has been added following the revised definition to specify the point of connection where there is no terminal box, meter, or other enclosure.
Code update ARTICLE 100 – DEFINITIONS
Service drop: This term was revised to now apply only to overhead conductors that are on the line side of the service point.
Code update ARTICLE 100 – DEFINITIONS
Service lateral: This definition was revised to clarify that these conductors are under the exclusive control of the utility company. The term now applies only to underground conductors that are on the line side of the service point.
Code update ARTICLE 100 – DEFINITIONS
Service point: An Informational Note has been added to provide additional information on the line of demarcation between the conductors of the serving utility and the premises wiring.
Code update ARTICLE 100 – DEFINITIONS
Uninterruptible power supply: This definition was added to describe the function of an uninterruptible power supply as a power supply used to provide alternating current power to a load for some period of time in the event of a power failure.
There are a number of key points covered in Article 110. Keep in mind that none of the standards in this article apply to communications circuits; however, some of the principles are referenced in Chapters 6 and 7 of the for wiring systems. Article 110 lays the ground work for overall installation requirements. Throughout this book, article sections and sub-sections will be referenced and identified in bold print brackets such as [110.3(B)].
Code addition SECTION 110.3(A)
Informational Note: A new second sentence was added to point out that there may be additional information regarding special conditions of use provided with the product instructions or other pertinent information marked on the equipment.
The Authority Having Jurisdiction (AHJ) has to approve all electrical equipment used, including low-voltage and limited-energy cables and equipment. Article 100 defines what this approval entails.
Article 110 covers general requirements for electrical installations. Sections [110.5] and [110.6] explain conductors and conductor sizes respectively. The key points are that conductors discussed in the Code are copper, except for the aluminum and copper-clad aluminum conductors covered in [310.5], and that conductor sizes are measured in American Wire Gage (AWG).
Code update SECTION 110.10
The title of this section was revised to include Short-Circuit Current Ratings,
and the text was revised to indicate that a fault can be between any circuit conductor and the equipment grounding conductor(s).
Section [110.12] explains requirements for the mechanical execution for electrical installations. For example, [110.12(A)] states that if metal plugs or plates are used with non-metallic enclosures, then they must be recessed from the outer surface of the enclosures. Unused raceway or cable openings in boxes and conduits must also be closed so that the protection provided is at least equal to the protection provided by the wall of the box or conduit. The bottom line? Knock-out plugs must be used for any unused openings in a box.
Some of the section regards common sense elements of installation, such as ensuring that materials are not damaged or contaminated by