Page is not available.
Make sure your browser allows JavaScript execution.

Please wait for page to completely download

Shopping Cart

Order fast

Series R608

Here you can configure your e-chain systemÂ® individually. All entries and changes are taking over to the part list which is situated at the end of the page.

Series R608 - Tube, enclosed

1. The e-chainÂ® crossbars can be removed from both sides
2. Lid for e-tube can be opened and removed
3. Stop-dog with brake for noise reduction
4. Wide plastic crossbar - cable friendly
5. Optimised gliding surfaces with side wear pads
6. Modular internal separation
7. closed and open types can be combined
8. Dirt-repelling outer contour

R608 Series is suitable for the following types of applications:

Vertical: Hanging applications, standing applications
Horizontal: Unsupported applications â¤ 7 m, gliding applications â¤ 450 m
Circular movement: Rotating applications possible, may require machining (machining rework is always required from rotation angles of 180Â°)

When to use Series R608

If a quiet type is required
For very high speed and/or acceleration
For long travel applications
For high fill weights

When not to use Series R608

If large unsupported lengths are required for side-mounted uses
Series R8840
When an extremely low vibration e-chainÂ®/e-tube is required
System E6

Installation dimensions


Part No. :
Inner width Bi [mm]:
Bending radius R [mm]:
Travel distance S [mm]:
Fixed end dM [mm]:
Chain length^** [mm]:
Number of chain links :
External width Ba [mm]:
H^* [mm]:
D [mm]:
K [mm]:
H2 [mm]:
D2 :
K2 [mm]:
Hi [mm]:
Ha [mm]:
Weight per link [g]:
Weight [kg/m]:
* The required clearance height is HF = H + 100 mm (at 5 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.

A=moving end, B=fixed end
Pitch: 143mm per link
Chain links per m: 7
Travel: S
Chain length = S/2 + K

Unsupported length

The unsupported length depends on fill weight
X axis: unsupported length in m FLB/FLG
Y axis: fill weight in kg/m
Lower scale: travel S in m
FLB = unsupported with permissible sag
FLG = unsupported with straight upper run

Price index:

Opening mechanism :

Personal contact

Application examples 3D-CAD Samples and catalog order E-ChainÂ® Expert call Service life calculation PDF file Ask the product expert

Designing with igusÂ®

Quiet model

Steel mounting brackets

Modular interior separation

5 widths and 10 bend radii

Design specificationFurther information on "unsupported application"

Design specificationFurther information on "gliding application"

Assembly instructions

Other installation types

Technical specifications

Strain reliefs

Interior separation

First separator

2. Shelves

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:

Option 1: Separators and spacers igusÂ® separators should be fitted every 2nd chain link as standard! Note: Observe side clearance of min. 32Â mm (e-tube) and min. 6Â mm (e-chainÂ®)!

Locking separator 6008 for e-chainsÂ® - with increased retention force for applications with very high humidity or extreme loads. The increased holding strength is produced by the asymmetric teeth locking into the crossbar. Please make sure of an even alignment

Product range


unassembled	assembled
Per . chain link

Please use Configurator for partitioning of interior and for filling with cables.

Call configurator


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Width [mm]:
Part No. :

Pc. Add to part list

Online Services:

Option 2: Shelves When many cables with different diameters are used - e-chainsÂ® and e-tubes can be divided vertically and horizontally

Side plates 6002, middle plate 6003 and shelves 420.X allow flexible partitioning Shelves of various widths can be arranged in steps of 7mm on 15 levels

For a more divided solutionheight slot separators 6004 can be used. However, these cannot be integrated into existing shelving without removing the interior separation system

The open height slot separator 6005 which is open on one side, can be retrofitted without removing the existing interior separation system. For installing the open height slot separators, the top and bottom slots cannot be used for shelves

Mounting brackets

Steel - pivoting

unassembled	assembled

For pivoting brackets

Same 2 parts set for all chain widths

Electrically conductive

Note: The e-chainÂ® will end with inner or outer side links based on the length. For the best appearance, make sure the e-chainÂ® ends with outer side links whenever possible. This is always the case with an odd number of links.


:
Part No. :
A=B [mm]:
C [mm]:
D [mm]:
E [mm]:
F [mm]:
G [mm]:
H [mm]:
I [mm]:
K [mm]:
M [mm]:

Strain reliefs

Guide troughs

Steel guide troughs

1. Guide trough (blue)
2. Glide bar (black)
3. Installation set (red)
4. Individual attachment without C-profile
5. Profile rail length

Guide troughs are used for applications where the upper run of the e-chainÂ® glides on the lower run. When using the igusÂ® guide trough made of steel, the following components are required. Guide trough without glide bars part no. 98.30, guide trough with glide bars part no. 98.31, assembly sets as butt connectors part no. 98.50. XX
.XX indicates the length of the C-profiles on which the guide trough will be mounted. The standard length of the trough parts and glide bars is 2m. The required length of guide trough is determined by the travel length.


Part No. :
D [mm]:

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:


Part No. :

Pc. Add to part list

Online Services:

Design specificationFurther information on "gliding application"

+ Easy assembly using installation sets
+ two-part model â adjustable from chain width
+ Very strong
+ Cost-effective
+ Large selection

Guide trough without glide bars, Part No. 98.30, guide trough with glide bars Part No. 98.31

Installation sets, Part No. 98.50. XX

Part List

Personal contact

GToB Imprint General notes Data protection declaration

hanging (max.) [m]	120
standing (max.) [m]	6
max. side-mounted, unsupported [m]	6
max. vertical, long travels [m]	450

Material of chain links	igumid G
Min. permissible temperature [Â°C]	-40
Max. permissible temperature [Â°C]	120
Gliding speed (max.) [m/s]	10
Max. gliding speed [m/sÂ²]	50
Speed FLG max. [m/s]	20
Speed FLG max. [m/sÂ²]	200
Speed FLB max. [m/s]	3
Speed FLB max. [m/sÂ²]	6
Flammability class of chain link	VDE 0304 IIC UL94 HB

Series R608

Series R608 - Tube, enclosed

Installation dimensions

Unsupported length

Long travels

Other installation types

Technical specifications

Interior separation

Product range

Product range

Mounting brackets

Guide troughs

Part List