wiggle - Man Page

The following options are understood by wiggle. Some of these are explained in more detail in the following sections on Merge, Diff, Extract, and Browse.

-m,  --merge

Select the "merge" function.  This is the default function.

-d,  --diff

Select the "diff" function.  This displays the differences between files.  This can be given after --browse (see below) in which case a patch or diff of two files can be viewed without the originals.

-x,  --extract

Select the "extract" function.  This extracts one branch of a patch or merge file.

-B,  --browse

Select the "browse" function.  This is similar to "merge" (or "diff") only with a different presentation.  Instead of the result simply being sent to standard output, it is presented using an ncurses-based GUI so that each hunk of the patch can be examined to understand what conflicts where involved and what needed to be ignored in order of the patch to be wiggled in to place.

-w,  --words

Request that all operations and display be word based.  This is the default for the "diff" function.

--non-space

Request that words be defined as sequences of non-white-space.  Without this flag words are sequences of alphanumerics or single non-white-space characters.  This flag is enabled by automatically enabled if wiggle needs to compare two files which both have more than 50,000 words.

-l,  --lines

Request that all operations and display be line based.

-b,  --ignore-blanks

De-emphasise white space (space, tab, and newline) is determining differences and changes.

Normally white space is treated like a word which can be matched or changed by a patch.  When this flag is in force, white space serves only as a separator between other words and is not matched itself. The effect of this is that changes in the amount of white space are not treated as significant.

To be precise, any white space is combined with the preceding word or, in the case of leading space on a line, with the following word. However it is not involved in any comparisons of that word.  If a patch deletes a word, the attached white space is deleted as well.  If a patch adds a word, the attached white space is added as well.

An empty line, or one that contains only blanks, will be treated as a single word that will match any other blank line, no matter how many spaces it has.

-b has no effect in --line mode.

-p,  --patch

Treat the last named file as a patch instead of a file (with --diff) or a merge (--extract). In merge or browse mode, -p requires there be exactly one file which is a patch and which can contain patches to multiple files.  The patches are merged into each file.  When used in merge mode, this usage requires the --replace option as writing lots of merged files to standard-out is impractical.

When processing a multi-file patch, -p can be followed by a numeric argument indicating how many file name components should be stripped from files named in the patch file.  If no numeric argument is given, wiggle will deduce an appropriate number based what files are present in the filesystem.

-r,  --replace

Normally the merged output is written to standard-output.  With --replace, the original file is replaced with the merge output. In browse mode, this instructs wiggle to always save the resulting merge when exiting.

--no-backup

Normally when an original file is replaced with the merged result, that file is renamed to have a ".porig" extension, so that it is preserved. If you don't want to keep the original, use this option to suppress the backup.

-o,  --output=

Rather than writing the result to stdout or to replace the original file, this requests that the output be written to the given file. This is only meaningful with --merge or --browse when given a single merge to browse.

This option overrides -r.

-R,  --reverse

When used with the diff function, swap the files before calculating the differences. When used with the merge or browse functions, wiggle attempts to revert changes rather than apply them.

--shortest

If the files being compared are large, it can take a long time to isolate the differences.  Normally wiggle will give up on perfection if a step take more than 20msec.  To over-ride this and always find the shortest edit-distance between two files, use the --shortest option.

-i,  --no-ignore

Normally wiggle will ignore changes in the patch which appear to already have been applied in the original.  With this flag those changes are reported as conflicts rather than being ignored.

-W,  --show-wiggles

When used with --merge, conflicts that can be wiggled into place are reported as conflicts with an extra stanza which shows what the result would be if this flag had not been used.  The extra stanza is introduce with a line containing 7 ampersand (&) characters thus:

<<<<<<< found
Some portion of the original file
||||||| expected
text to replace
=======
text to replace it with
&&&&&&& resolution
Text that would result from a successful wiggle
>>>>>>> replacement

--report-wiggles

If a merge is successful in applying all changes, it will normally exit with a success status (0), only reporting failure (1) if a conflict occurred and was annotated.  With --report-wiggles wiggle will also report failure if any changes had to be wiggled in.  This can be useful when wiggle is used for automatic merges as with git. If any wiggles happen, git will report the failure, and the results can be examined to confirm they are acceptable.

-h,  --help

Print a simple help message.  If given after one of the function selectors (--merge, --diff, --extract, --browse) help specific to that function is displayed.

-V,  --version

Display the version number of wiggle.

-v,  --verbose

Enable verbose mode.  Currently this makes no difference.

-q,  --quiet

Enable quiet mode.  This suppresses the message from the merge function when there are unresolvable conflicts.

wiggle can divide a text into lines or words when performing it's tasks. A line is simply a string of characters terminated by a newline. A word is either a maximal contiguous string of alphanumerics (including underscore), a maximal contiguous string of space or tab characters, or any other single character.

The merge function modifies a given text by finding all changes between two other texts and imposing those changes on the given text.

Normally wiggle focuses on which words have changed so as to maximise the possibility of finding a good match in the given text for the context of a given change.  However it can consider only whole lines instead.

wiggle extracts the three texts that it needs from files listed on the command line.  Either 1, 2, or 3 files may be listed, and any one of them may be a lone hyphen signifying standard-input.

If one file is given and the -p option is not present, the file is treated as a merge file, i.e. the output of "merge -A" or "wiggle".  Such a file implicitly contains three streams and these are extracted and compared.

If two files are given, then the first simply contains the primary text, and the second is treated as a patch file (the output of "diff -u" or "diff -c", or a ".rej" file from patch) and the two other texts are extracted from that.

If one file is given together with the -p option, the file is treated as a patch file containing the names of the files that it patches.  In this case multiple merge operations can happen and each takes one stream from a file named in the patch, and the other two from the patch itself.  The --replace option is required and the results are written back to the target files.

Finally if three files are listed, they are taken to contain the given text and the two other texts, in order.

Normally the result of the merge is written to standard-output. If the -r flag is given, the output is written to a file which replaces the original given file. In this case the original file will normally be renamed to have a .porig suffix (for "patched original" which makes sense if you first use patch to apply a patch, and then use wiggle to wiggle the rejects in).  This can be suppressed with the --no-backup uption.

Further if the -o option is given with a file name, the output will be written to that file.  In this case no backup is created.

If no errors occur (such as file access errors) wiggle will exit with a status of 0 if all changes were successfully merged, and with an exit status of 1 and a brief message if any changes could not be fully merged and were instead inserted as annotations. However if either --report-wiggles or --show-wiggles options were given, wiggle will also exist with status of 1 if any changes had to be wiggled in even though this was successful.

The merge function can operate in three different modes with respect to lines or words.

With the --lines option, whole lines are compared and any conflicts are reported as whole lines that need to be replaced.

With the --words option, individual words are compared and any conflicts are reported just covering the words affected.  This uses the <<<|||===>>> conflict format.

Without either of these options, a hybrid approach is taken. Individual words are compared and merged, but when a conflict is found the whole surrounding line is reported as being in conflict.

wiggle will ensure that every change between the two other texts is reflected in the result of the merge somehow.  There are four different ways that a change can be reflected.

1. If a change converts A to B and A is found at a suitable place in the original file, it is replaced with B. This includes the possibility that B is empty, but not that A is empty.
2. If a change is found which simply adds B and the text immediately preceding and following the insertion are found adjacent in the original file in a suitable place, then B is inserted between those adjacent texts.
3. If a change is found which changes A to B and this appears (based on context) to align with B in the original, then it is assumed that this change has already been applied, and the change is ignored.  When this happens, a message reflecting the number of ignored changes is printed by wiggle. This optimisation can be suppressed with the -i flag.
4. If a change is found that does not fit any of the above possibilities, then a conflict is reported as described earlier.

The diff function is provided primarily to allow inspection of the alignments that wiggle calculated between texts and that it uses for performing a merge.

The output of the diff function is similar to the unified output of diff.  However while diff does not output long stretches of common text, wiggle's diff mode outputs everything.

When calculating a word-based alignment (the default), wiggle may need to show these word-based differences.  This is done using an extension to the unified-diff format.  If a line starts with a vertical bar, then it may contain sections surrounded by special multi-character brackets.  The brackets "<<<++" and "++>>>" surround added text while "<<<--" and "-->>>" surround removed text.

wiggle can be given the two texts to compare in one of three ways.

If only one file is given, then it is treated as a patch and the two branches of that patch are compared.  This effectively allows a patch to be refined from a line-based patch to a word-based patch.

If two files are given, then they are normally assumed to be simple texts to be compared.

If two files are given along with the --patch option, then the second file is assumed to be a patch and either the first (with -1) or the second (with -2) branch is extracted and compared with text found in the first file.

This last option causes wiggle to apply a "best-fit" algorithm for aligning patch hunks with the file before computing the differences.  This algorithm is used when merging a patch with a file, and its value can be seen by comparing the difference produced this way with the difference produced by first extracting one branch of a patch into a file, and then computing the difference of that file with the main file.

The extract function of wiggle simply exposes the internal functionality for extracting one branch of a patch or a merge file.

Precisely one file should be given, and it will be assumed to be a merge file unless --patch is given, in which case a patch is assumed.

The choice of branch in made by providing one of -1, -2, or -3 with obvious meanings.

The browse function of wiggle presents the result of a merge or (with -d) a diff in a text-based GUI that can be navigated using keystrokes similar to vi(1) or emacs(1).

The browser allows each of the two or  three streams to be viewed individually with colours used to highlight different sorts of text - green for added text, red for deleted text etc.  It can also show the patch by itself, the full result of the merge, or the merge and the patch side-by-side.

The browser provides a number of context-sensitive help pages which can be accessed by typing '?'

The top right of the GUI will report the type of text under the cursor, which is also indicated by the colour of the text.  Options are Unchanged, Changed, Unmatched, Extraneous, AlreadyApplied and Conflict.  If the meanings of these are clear a little experimentations should help.

A limited amount of editing is permitted while in browse mode.  Currently text that is unwanted can be discarded with x. This will convert a Conflict or Change to Unchanged, and an Unmatched to Changed (which effectively changes it to the empty string). Similarly a text can be marked as wanted with c. This will convert a Conflict or Extraneous to Changed.  Using the same key again will revert the change.

Finally, the uppercase X will revert all changes on the current line.

To make more sweeping changes you can use v which runs an editor, preferring $VISUAL or $EDITOR if they are set in the environment.

If you make any changes, then wiggle will ask you if you want to save the changes, even if --replace was not given.