Acoustics, Volume 6, Issue 2 (June 2024) – 15 articles

While the focus of bilingual research is frequently on simultaneous or early bilingualism, the interactions between late bilinguals’ first language (L1) and second language (L2) have rarely been studied previously. To fill this research gap, the aim of the current study was to investigate the production of vowels in the L1 Mandarin and L2 Cantonese of Mandarin–Cantonese late bilinguals in Hong Kong. A production experiment was conducted with 22 Mandarin–Cantonese bilinguals, as well as with 20 native Mandarin speakers and 21 native Cantonese speakers. Acoustic analyses, including formants of and Euclidean distances between the vowels, were performed. Both vowel category assimilation and dissimilation were noted in the Mandarin–Cantonese bilinguals’ L1 and L2 vowel systems, suggesting interactions between the bilinguals’ L1 and L2 vowel categories. In general, the findings are in line with the hypotheses of the Speech Learning Model and its revised version, which state that L1–L2 phonetic interactions are inevitable, as there is a common phonetic space for storing the L1 and L2 phonetic categories, and that learners always have the ability to adapt their phonetic space. Future studies should refine the data elicitation method, increase the sample size and include more language pairs to better understand L1 and L2 phonetic interactions. Full article

This study investigates the impact of emotionalizing sound design on driving behaviour, focusing on the effect of an acoustic stimulus that varies from positive to negative/threatening based on the vehicle’s time headway (THW). Our primary goal was to explore how this sound influences driving durations within specific THW ranges and the mean THW itself. The experiment utilized a control group and a within-participant setting across simulated driving scenarios. The statistical analysis showed mixed results. While participants in the control group setup did not demonstrate significant reductions in the durations of driving in lower THW ranges, a modest but significant increase in mean THW was observed when the emotionalizing sound was active. However, within-participant comparisons showed both a significant decrease in the duration of driving at lower THWs and an increase in mean THW when the negative stimulus was active, suggesting the stimulus’ effectiveness in promoting safer driving habits. These findings highlight the potential of emotionalizing sound design to influence driver behaviour towards maintaining safer distances, although the impact appears to diminish at higher THW ranges. Future research should further investigate the characteristics of sounds that effectively modify driving behaviour, aiming for broader applications in traffic safety. Full article

Considering the lack of studies on the transient vibro-acoustic properties of conical shell structures, a Jacobi–Ritz boundary element method for forced vibro-acoustic behaviors of structure is proposed based on the Newmark-β integral method and the Kirchhoff time domain boundary integral equation. Based on the idea of the differential element method and the first-order shear deformation theory (FSDT), the vibro-acoustic model of conical shells is established. The axial and circumferential displacement tolerance functions are expressed using Jacobi polynomials and the Fourier series. The time domain response of the forced vibration of conical shells is calculated based on the Rayleigh–Ritz method and Newmark-β integral method. On this basis, the time domain response of radiated noise is solved based on the Kirchhoff integral equation, and the acoustic radiation characteristics of conical shells from forced vibration are analyzed. Compared with the coupled FEM/BEM method, the numerical results demonstrate the high accuracy and great reliability of this method. Furthermore, the semi-vertex angle, load characteristics, and boundary conditions related to the vibro-acoustic response of conical shells are examined. Full article

Different types of resonators are used to create acoustic metamaterials and metasurfaces. Recent studies focused on the use of multiple resonators of the dipole, quadrupole, octupole, and even hexadecapole types. This paper considers the theory of an acoustic metasurface, which is a flat surface with a periodic arrangement of multipole resonators. The sound field reflected by the metasurface is determined. If the distance between the resonators is less than half the wavelength of the incident plane wave, the far field can be described by a reflection coefficient that depends on the angle of incidence. This allows us to characterize the acoustic properties of the metasurface by a homogenized boundary condition, which is a high-order tangential impedance boundary condition. The tangential impedance depending on the multipole order of the resonators is introduced. In addition, we analyze the sound absorption properties of these metasurfaces, which are a critical factor in determining their performance. The paper presents a theoretical model for the subwavelength case that accounts for the multipole orders of resonators and their impact on sound absorption. The maximum absorption coefficient for a diffuse sound field, as well as the optimal value for the homogenized impedance, are calculated for arbitrary multipole orders. The examples of the multipole resonators, which can be made from a set of Helmholtz resonators or membrane resonators, are discussed as well. Full article

This work presents a numerical study on atmospheric sound propagation over rough water surfaces with the aim of improving predictions of sound propagation over long distances. A method for generating pseudorandom sea profiles consistent with sea wave spectra is presented. The proposed method is suited for capturing the logarithmic nature of the energy distribution of the waves. Sea profiles representing fully developed seas for sea states 2, 3, 4, and 5 are generated from the Elfouhaily et al. (ECKV) sea wave spectra. Excess attenuation caused by refraction and surface roughness is predicted with a parabolic equation (PE) solver. A novel method for estimating equivalent effective impedance based on PE predictions at different sea states is presented. Parametric expressions using acoustic frequency and significant wave height are developed for effective surface impedances. In this work, sea surface roughness is on a scale comparable with the acoustic wavelength. Under this condition, the acoustic scattering is primarily incoherent. This work shows the limitations of using an equivalent surface impedance in such incoherent scattering cases. Full article

Auditory research aims in general to lead to understanding of physiological processes. By contrast, the state of the art in automatic speech processing (notably recognition) is dominated by large pre-trained models that are meant to be used as black-boxes. In this work, we integrate a physiologically plausible (albeit simple filter-based) model of the cochlea into a much larger pre-trained acoustic model for speech recognition. We show that the hybrid system can be trained and evaluated with various combinations of fine-tuning and self-supervision. The results broadly show that the system automatically yields structures that are known to work well. Moreover, these structures lack artifacts that were apparent in (our) previous work using less sophisticated neural models. We conclude that the hybrid structure is an appropriate way to proceed in auditory research, more generally allowing the work to take advantage of larger models and databases from which it would not otherwise benefit. Full article

This paper delves into an in-depth exploration of speaker recognition methodologies, with a primary focus on three pivotal approaches: feature-level fusion, dimension reduction employing principal component analysis (PCA) and independent component analysis (ICA), and feature optimization through a genetic algorithm (GA) and the marine predator algorithm (MPA). This study conducts comprehensive experiments across diverse speech datasets characterized by varying noise levels and speaker counts. Impressively, the research yields exceptional results across different datasets and classifiers. For instance, on the TIMIT babble noise dataset (120 speakers), feature fusion achieves a remarkable speaker identification accuracy of 92.7%, while various feature optimization techniques combined with K nearest neighbor (KNN) and linear discriminant (LD) classifiers result in a speaker verification equal error rate (SV EER) of 0.7%. Notably, this study achieves a speaker identification accuracy of 93.5% and SV EER of 0.13% on the TIMIT babble noise dataset (630 speakers) using a KNN classifier with feature optimization. On the TIMIT white noise dataset (120 and 630 speakers), speaker identification accuracies of 93.3% and 83.5%, along with SV EER values of 0.58% and 0.13%, respectively, were attained utilizing PCA dimension reduction and feature optimization techniques (PCA-MPA) with KNN classifiers. Furthermore, on the voxceleb1 dataset, PCA-MPA feature optimization with KNN classifiers achieves a speaker identification accuracy of 95.2% and an SV EER of 1.8%. These findings underscore the significant enhancement in computational speed and speaker recognition performance facilitated by feature optimization strategies. Full article

The utilization of a reverberant shear-wave field in shear-wave elastography has emerged as a promising technique for achieving robust shear-wave speed (SWS) estimation. However, many types of estimators cannot accurately measure SWS within such a complicated 3D wave field. This study introduces an advanced autocorrelation estimator based on angular integration known as the angular integral autocorrelation (AIA) approach to address this issue. The AIA approach incorporates all the autocorrelation data from various angles during measurements, resulting in enhanced robustness to both noise and imperfect distributions in SWS estimation. The effectiveness of the AIA estimator for SWS estimation is first validated using a k-Wave simulation of a stiff branching tube in a uniform background. Furthermore, the AIA estimator is applied to ultrasound elastography experiments, magnetic resonance imaging (MRI) experiments, and optical coherence tomography (OCT) studies across a range of different excitation frequencies on tissues and phantoms, including in vivo scans. The results verify the capacity of the AIA approach to enhance the accuracy of SWS estimation and the signal-to-noise ratio (SNR), even within an imperfect reverberant shear-wave field. Compared to simple autocorrelation approaches, the AIA approach can also successfully visualize and define lesions while significantly improving the estimated SWS and SNR in homogeneous background materials and providing improved elastic contrast between structures within the scans. These findings demonstrate the robustness and effectiveness of the AIA approach across a wide range of applications, including ultrasound elastography, magnetic resonance elastography (MRE), and optical coherence elastography (OCE), for accurately identifying the elastic properties of biological tissues in diverse excitation scenarios. Full article

Musicological and traffic psychology research shows that emotions can be changed by certain tone combinations or sound characteristics and that emotions, in turn, influence our driving behavior. Nevertheless, there are no studies on how a dynamic active sound design could influence driving behavior via changing the emotional state of drivers in certain driving situations. Based on a previous study, emotionalizing sounds, characterized by their capacity to evoke specific emotional responses in individuals, were created and used to investigate their effect on the perception of safety distances in an online study. To test this, participants made statements on the safety distance shown in videos of cars following scenarios combined with emotionalizing sounds. The results show a significant difference in the estimated safety distance for videos combined with sounds invoking positive emotions like light-heartedness vs. sounds invoking negative emotions like feeling threatened. The odds of the safety distance being evaluated as too small compared with appropriate were two to three times higher for some threatening sounds vs. the positive sounds. The results further suggest that threatening sounds influenced participants’ wishes to increase the depicted safety distances. The results show that emotionalizing sounds had effects on the participants, though not all were statistically significant. Full article

The partial discharge (PD) event in high-voltage insulation releases energy, exerts mechanical pressure, and generates elastic waves. Detecting and locating these PD events through short-duration acoustic pulses is well established, particularly in gas-insulated systems and oil-insulated transformers. However, its full potential remains untapped in solid insulation systems, where the propagation capability of the acoustic pulse and the acoustic reflections pose fundamental challenges to the acoustic emission (AE) detection technique. This study investigates the influence of reflections and multiple paths on the propagating acoustic pulse in polymeric insulating materials using a finite element method (FEM) in COMSOL. It was observed that the reflections from the boundary influence the propagating pulse’s shape, peak magnitude, and arrival time. An analytical MATLAB model further quantifies the impact of multiple propagation paths on the shape, magnitude, and arrival time of the pulse travelling in a cylinder. Additionally, a Perfect Matched Layer (PML) was implemented in the COMSOL model to eliminate the reflections from the boundary, and it revealed that the acoustic pulse magnitude decreases with distance following the inverse square law. In essence, the models aid in measuring how reflections contribute to the observed signals, facilitating the precise identification of the source of the PD event in the tested system. Full article

Traversal time in the tunneling effect for ultrasonic waves in tapered waveguides is derived considering its analogy with quantum and electromagnetic wave tunneling. If, as traversal time, the so-called phase time is considered, the ultrasonic wave packet shows the equivalent in acoustics of superluminality, i.e., the derived velocity, crosses the limit of bulk transverse ultrasonic waves in the medium of the waveguide that is the equivalent of c in the quantum and electromagnetic cases. The graphs clearly illustrating this so-called Hartman effect are obtained confirming the experimental results in the three different fields. Full article

The nonlinear sloshing of an incompressible fluid with irrotational flow in a complicated-shape tank due to horizontal excitation is studied with a semi-analytical method proposed in this study. In this method, the velocity potential function of a liquid in a complicated-shape tank is estimated by using an approximate analytical transformation function from a complicated-shape region to a rectangular region. This function is obtained through Schwarz–Christoffel mapping and polynomial fitting. Nonlinear dynamic equations for the fluid–structure coupled system are developed based on the Hamilton–Ostrogradskiy principle. Nonlinear kinematic equations for the fluid–structure coupled system are derived based on the relationship between the liquid velocity and the free-surface equation. The Galerkin method is used to convert partial differential equations into ordinary differential equations. When tank movement is given, nonlinear models for the coupled system can be reduced to simple ones for liquid sloshing. Natural frequencies for the coupled system and liquid sloshing are analyzed, and the semi-analytical results agree with the numerical ones calculated with the software DampSlosh. Hydrodynamic forces and moments are also analyzed, and the semi-analytical results agree well with the numerical ones calculated with the Flow3D v10.1.1. Full article

This study investigates the application of Ultrasonic Pulse Velocity (UPV) for crack depth estimation in cylindrical structures, focusing on two approaches: reference measurement and dual measurement. It addresses the challenge of applying UPV to curved surfaces, a scenario less studied than that of flat surfaces. The paper details the modification of UPV methodologies to account for curvature, presenting analytic solutions and numerical validations for both approaches. The findings reveal that curvature-adjusted equations yield accurate crack depth estimations, enhancing the reliability of UPV in diverse structural contexts. The study contributes to safer and more effective structural health monitoring, particularly in cylindrical infrastructures like columns and foundations. Full article

Acoustic metamaterials (AMs) composed of periodic artificial structures have extraordinary sound wave manipulation capabilities compared with traditional acoustic materials, and they have attracted widespread research attention. The sound insulation performance of thin-walled structures commonly used in engineering applications with restricted space, for example, vehicles’ body structures, and the latest studies on the sound insulation of thin-walled metamaterial structures, are comprehensively discussed in this paper. First, the definition and math law of sound insulation are introduced, alongside the primary methods of sound insulation testing of specimens. Secondly, the main sound insulation acoustic metamaterial structures are summarized and classified, including membrane-type, plate-type, and smart-material-type sound insulation metamaterials, boundaries, and temperature effects, as well as the sound insulation research on composite structures combined with metamaterial structures. Finally, the research status, challenges, and trends of sound insulation metamaterial structures are summarized. It was found that combining the advantages of metamaterial and various composite panel structures with optimization methods considering lightweight and proper wide frequency band single evaluator has the potential to improve the sound insulation performance of composite metamaterials in the full frequency range. Relative review results provide a comprehensive reference for the sound insulation metamaterial design and application. Full article