Search Results (349)

This study investigates soil loss in the Wadi Bin Abdullah watershed using the Revised Universal Soil Loss Equation (RUSLE) combined with advanced tools, such as remote sensing and the Geographic Information System (GIS). By leveraging the ALOS PALSAR Digital Elevation Model (DEM), Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS) rainfall data, and the Digital Soil Map of the World (DSMW), the research accurately evaluates soil loss loads. The methodology identifies significant variations in soil loss rates across the entire watershed, with values ranging from 1 to 1189 tons per hectare per year. The classification of soil loss into four stages—very low (0–15 t/ha/yr), low (15–45 t/ha/yr), moderate (45–75 t/ha/yr), and high (>75 t/ha/yr)—provides a nuanced perspective on soil loss dynamics. Notably, 20% of the basin exhibited a soil loss rate of 36 tons per hectare per year. These high rates of soil erosion are attributed to certain factors, such as steep slopes, sparse vegetation cover, and intense rainfall events. These results align with regional and global studies and highlight the impact of topography, land use, and soil properties on soil loss. Moreover, the research emphasizes the importance of integrating empirical soil loss models with modern technological approaches to identify soil loss-prone locations and precisely quantify soil loss rates. These findings provide valuable insights for developing environmental management strategies aimed at mitigating the impacts of soil loss, promoting sustainable land use practices, and supporting resource conservation efforts in arid and semi-arid regions. Full article

The scientific field of precision agriculture employs increasingly innovative techniques to optimize inputs, maximize profitability, and reduce environmental impact. However, obtaining a high number of soil samples is challenging in order to make precision agriculture viable. There is a trade-off between the amount of data needed and the time and resources spent to obtain these data compared to the accuracy of the maps produced with more or fewer points. In the present study, the research was based on an exhaustive dataset of apparent electrical conductivity (aEC) containing 3906 points distributed along 26 transects with spacing between each of up to 40 m, measured by the proximal soil sensor EM38-MK2, for a grain-producing area of 72 ha in São Paulo, Brazil. A second sparse dataset was simulated, showing only four transects with a 400 m distance and, in the end, only 162 aEC points. The aEC map via ordinary kriging (OK) from the grid with 26 transects was considered the reference, and two other mapping approaches were used to map aEC via sparse grid: kriging with external drift (KED) and geographically weighted regression (GWR). These last two methods allow the increment of auxiliary variables, such as those obtained by remote sensors that present spatial resolution compatible with the pivot scale, such as data from the Landsat-8, Aster, and Sentinel-2 satellites, as well as ten terrain covariates derived from the Alos Palsar digital elevation model. The KED method, when used with the sparse dataset, showed a relatively good fit to the aEC data (R² = 0.78), with moderate prediction accuracy (MAE = 1.26, RMSE = 1.62) and reasonable predictability (RPD = 1.76), outperforming the GWR method, which had the weakest performance (R² = 0.57, MAE = 1.78, RMSE = 2.30, RPD = 0.81). The reference aEC map using the exhaustive dataset and OK showed the highest accuracy with an R² of 0.97, no systematic bias (ME = 0), and excellent precision (RMSE = 0.56, RPD = 5.86). Management zones (MZs) derived from these maps were validated using soil texture data from clay samples measured at 0–10 cm depth in a grid of 72 points. The KED method demonstrated the highest potential for accurately defining MZs for irrigation, producing a map that closely resembled the reference MZ map, thereby providing reliable guidance for irrigation management. Full article

The determination of swelling/shrinking phenomena, from natural and anthropogenic activity, is examined in this study through the synergy of various remote sensing methodologies. For the period of 2016–2022, a time-series InSAR analysis of Sentinel-1 satellite images, with a Coherent Change Detection procedure, was conducted to calculate the Normalized Coherence Difference. These were combined with Sentinel-2 multispectral data by exploiting the Normalized Difference Vegetation Index to create multi-temporal image composites. In addition, ALOS-Palsar DEM derivatives highlighted the geomorphological characteristics, which, in conjunction with the satellite imagery outcomes and other auxiliary spatial datasets, were embedded within a Multi-Criteria Decision Analysis (MCDA) model. The synergy of the remote sensing and GIS techniques’ applicability within the MCDA model highlighted the zones undergoing seasonal swelling/shrinking processes in Pyrgos–Parekklisia and Moni regions in Cyprus. The accuracy assessment of the produced final MCDA outcome provided an overall accuracy of 72.4%, with the Kappa statistic being 0.66, indicating substantial agreement of the MCDA outcome with the results from a Persistent Scatterer Interferometry analysis and ground-truth observations. Thus, this study offers decision-makers a powerful procedure to monitor longer- and shorter-term swelling/shrinking phenomena. Full article

The realization of a harmonious relationship between the natural environment and economic development has always been the unremitting pursuit of traditional mineral resource-based cities. With rich reserves of iron and coal ore resources, Laiwu has become an important steel production base in Shandong Province in China, after several decades of industrial development. However, some serious environmental problems have occurred with the quick development of local steel industries, with ground subsidence and consequent secondary disasters as the most representative ones. To better evaluate possible ground collapse risk, comprehensive approaches incorporating the common deformation monitoring with small-baseline subset (SBAS)-synthetic aperture radar interferometry (InSAR) technique, environmental factors analysis, and risk evaluation are designed here with ALOS PALSAR and Sentinel-1 SAR observations. A retrospect on the ground deformation process indicates that ground deformation has largely decreased by around 51.57% in area but increased on average by around −5.4 mm/year in magnitude over the observation period of Sentinel-1 (30 July 2015 to 22 August 2022), compared to that of ALOS PALSAR (17 January 2007 to 28 October 2010). To better reveal the potential triggering mechanism, environmental factors are also utilized and conjointly analyzed with the ground deformation time series. These analysis results indicate that the ground deformation signals are highly correlated with human industrial activities, such underground mining, and the operation of manual infrastructures (landfill, tailing pond, and so on). In addition, the evaluation demonstrates that the area with potential collapse risk (levels of medium, high, and extremely high) occupies around 8.19 km², approximately 0.86% of the whole study region. This study sheds a bright light on the safety guarantee for the industrial operation and the ecologically friendly urban development of traditional steel production industrial cities in China. Full article

Forest biomass estimation is undoubtedly one of the most pressing research subjects at present. Combining multi-source remote sensing information can give full play to the advantages of different remote sensing technologies, providing more comprehensive and rich information for aboveground biomass (AGB) estimation research. Based on Landsat 8, Sentinel-2A, and ALOS2 PALSAR data, this paper takes the artificial coniferous forests in the Saihanba Forest of Hebei Province as the object of study, fully explores and establishes remote sensing factors and information related to forest structure, gives full play to the advantages of spectral signals in detecting the horizontal structure and multi-dimensional synthetic aperture radar (SAR) data in detecting the vertical structure, and combines environmental factors to carry out multivariate synergistic methods of estimating the AGB. This paper uses three variable selection methods (Pearson correlation coefficient, random forest significance, and the least absolute shrinkage and selection operator (LASSO)) to establish the variable sets, combining them with three typical non-parametric models to estimate AGB, namely, random forest (RF), support vector regression (SVR), and artificial neural network (ANN), to analyze the effect of forest structure on biomass estimation, explore the suitable AGB of artificial coniferous forests estimation of machine learning models, and develop the method of quantifying saturation value of the combined variables. The results show that the horizontal structure is more capable of explaining the AGB compared to the vertical structure information, and that combining the multi-structure information can improve the model results and the saturation value to a great extent. In this study, different sets of variables can produce relatively superior results in different models. The variable set selected using LASSO gives the best results in the SVR model, with an $R^2$ values of 0.9998 and 0.8792 for the training and the test set, respectively, and the highest saturation value obtained is 185.73 t/ha, which is beyond the range of the measured data. The problem of saturation in biomass estimation in boreal medium- and high-density forests was overcome to a certain extent, and the AGB of the Saihanba area was better estimated. Full article

This article presents a low-cost insurance system developed for smallholder farms in disaster-prone regions, primarily using free Earth observation (EO) data and free open source software’s (FOSS), collectively termed “sustainable geoinformatics.” The study examined 30 farms in Risaralda Department, Colombia. A digital elevation model (12.5 m pixels) from the ALOS PALSAR satellite sensor was used with a geographic information system (GIS) to map the terrain, drainage, and geohazards of each farming district. Google Earth Engine (GEE) was used to carry out time-series analysis of 15 EO and weather datasets for 1998 to 2020. This analysis enabled the levels of risk from hydrometeorological hazards to be determined for each farm of the study, providing key data for the setting of insurance premiums. A parametric insurance product was developed using a proprietary mobile phone app that collected GPS-tagged, time-stamped mobile phone photos to verify crop damage, with further verification of crop health also provided by daily near-real-time satellite imagery (e.g., PlanetScope with 3 m pixels). Machine learning was used for feature identification with the photos and the satellite imagery. Key features of this insurance system are its low operational cost and rapid damage verification relative to conventional approaches to farm insurance. This relatively fast, low-cost, and affordable approach to insurance for small-scale farming enhances sustainable development by enabling policyholder farmers to recover more quickly from disasters. Full article

Cloud-based remote sensing has spurred the use of techniques to improve mapping accuracy where individual images may have lower quality, especially in areas with complex terrain or high cloud cover. This study investigates the influence of image compositing and multisource data fusion on the multitemporal land cover mapping of the Pagsanjan-Lumban and Baroro Watersheds in the Philippines. Ten random forest models for each study site were used, all using a unique combination of more than 100 different input features. These features fall under three general categories. First, optical features were derived from reflectance bands and ten spectral indices, which were further subdivided into annual percentile and seasonal median composites; second, radar features were derived from ALOS PALSAR by computing textural indices and a simple band ratio; and third, topographic features were computed from the ALOS GDSM. Then, accuracy metrics and McNemar’s test were used to assess and compare the significance of about 90 pairwise model outputs. Data fusion significantly improved the accuracy of multitemporal land cover mapping in most cases. However, image composition had varied impacts for both sites. This could imply local characteristics and feature inputs as potential determinants of the ideal composite method. Hence, the iterative screening or optimization of both input features and composites is recommended to improve multitemporal mapping accuracy. Full article

The ability to accurately map tropical wetland dynamics can significantly contribute to a number of areas, including food and water security, protection and enhancement of ecosystems, flood hazard management, and our understanding of natural greenhouse gas emissions. Yet currently, there is not a tractable solution for mapping tropical forested wetlands at high spatial and temporal resolutions at a regional scale. This means that we lack accurate and up-to-date information about some of the world’s most significant wetlands, including the Amazon Basin. RadWet-L is an automated machine-learning classification technique for the mapping of both inundated forests and open water using ALOS ScanSAR data. We applied and validated RadWet-L for the Amazon Basin. The proposed method is computationally light and transferable across the range of landscape types in the Amazon Basin allowing, for the first time, regional inundation maps to be produced every 42 days at 50 m resolution over the period 2019–2023. Time series estimates of inundation extent from RadWet-L were significantly correlated with NASA-GFZ GRACE-FO water thickness (Pearson’s r = 0.96, p < 0.01), USDA G-REALM lake hight (Pearson’s r between 0.63 and 0.91, p < 0.01), and in situ river stage measurements (Pearson’s r between 0.78 and 0.94, p < 0.01). Additionally, we conducted an evaluation of 11,162 points against the input ScanSAR data revealing spatial and temporal consistency in the approach (F1 score = 0.97). Serial classifications of ALOS-2 PALSAR-2 ScanSAR data by RadWet-L can provide unique insights into the spatio-temporal inundation dynamics within the Amazon Basin. Understanding these dynamics can inform policy in the sustainable use of these wetlands, as well as the impacts of inundation dynamics on biodiversity and greenhouse gas budgets. Full article

Speckle reduction is a key preprocessing approach for the applications of Synthetic Aperture Radar (SAR) data. For many interpretation tasks, high-quality SAR images with a rich texture and structure information are useful. Therefore, a satisfactory SAR image filter should retain this information well after processing. Some quantitative assessment indicators have been presented to evaluate the edge-preservation capability of single-polarization SAR filters, among which the non-clean-reference-based (i.e., blind) ones are attractive. However, most of these indicators are derived based only on the basic fact that the speckle is a kind of multiplicative noise, and they do not take into account the detailed statistical distribution traits of SAR data, making the assessment not robust enough. Moreover, to our knowledge, there are no specific blind assessment indicators for fully Polarimetric SAR (PolSAR) filters up to now. In this paper, a blind assessment indicator based on an SAR Ratio Gradient Operator (RGO) and Confidence Interval Estimation (CIE) is proposed. The RGO is employed to quantify the edge gradient between two neighboring image patches in both the speckled and filtered data. A decision is then made as to whether the ratio gradient value in the filtered image is close to that in the unobserved clean image by considering the statistical traits of speckle and a CIE method. The proposed indicator is also extended to assess the PolSAR filters by transforming the polarimetric scattering matrix into a scalar which follows a Gamma distribution. Experiments on the simulated SAR dataset and three real-world SAR images acquired by ALOS-PALSAR, AirSAR, and TerraSAR-X validate the robustness and reliability of the proposed indicator. Full article

Digital elevation models (DEMs) are widely used in digital terrain analysis, global change research, digital Earth applications, and studies concerning natural disasters. In this investigation, a thorough examination and comparison of five open-source DEMs (ALOS PALSAR, SRTM1 DEM, SRTM3 DEM, NASADEM, and ASTER GDEM V3) was carried out, with a focus on the Chongqing region as a specific case study. By utilizing ICESat-2 ATL08 data for validation and employing a random forest model to refine terrain variables such as slope, aspect, land cover, and landform type, a study was undertaken to assess the precision of DEM data. Research indicates that spatial resolution significantly impacts the accuracy of DEMs. ALOS PALSAR demonstrated satisfactory performance, reducing the corrected root mean square error (RMSE) from 13.29 m to 9.15 m. The implementation of the random forest model resulted in a significant improvement in the accuracy of the 30 m resolution NASADEM product. This improvement was supported by a decrease in the RMSE from 38.24 m to 9.77 m, demonstrating a significant 74.45% enhancement in accuracy. Consequently, the ALOS PALSAR and NASADEM datasets are considered the preferred data sources for mountainous urban areas. Furthermore, the study established a clear relationship between the precision of DEMs and slope, demonstrating a consistent decline in precision as slope steepness increases. The influence of aspect on accuracy was considered to be relatively minor, while vegetated areas and medium-to-high-relief mountainous terrains were identified as the main challenges in attaining accuracy in the DEMs. This study offers valuable insights into selecting DEM datasets for complex terrains in mountainous urban areas, highlighting the critical importance of choosing the appropriate DEM data for scientific research. Full article

Modeling forest structure using multi-source satellite data is beneficial to understanding the relationship between vertical and horizontal structure and image features to provide more comprehensive and abundant information for the study of forest structural complexity. This study investigates and models forest structure as a multivariate structure based on sample data and active-passive remote sensing data (Landsat8, Sentinel-2A, and ALOS-2 PALSAR) from the Saihanba Forest in Hebei Province, Northern China, to measure forest structural complexity, relying on a relationship-driven model between field and satellite data. In this study, we considered the effects of the role of satellite variables in different vertical structure types and horizontal structure ranges, used two methods to stepwise select significant variables (stepwise forward selection and Pearson correlation coefficient), and employed a multivariate modeling technique (redundancy analysis) to derive a forest composite structure index (FSI), combining both horizontal and vertical structure attributes. The results show that optical texture can better represent forest structure characteristics, polarization interferometric radar information can represent the vertical structure information of forests, and combining the two can represent 77% of the variance of multiple forest structural attributes. The new FSI can explain 93% of the relationship between stand structure and satellite variables, and the linear fit R² to the measured data reaches 0.91, which largely shows the situation of the measured data. The generated forest structure map more accurately reflects the complexity of the forest structure in the Saihanba Forest, achieving a supplementary explanation of the measured data. Full article

The unique P-band synthetic aperture radar (SAR) instrument, BIOMASS, is scheduled for launch in 2024. This satellite will enhance the estimation of subcanopy topography, owing to its strong penetration and fully polarimetric observation capability. In order to conduct global-scale mapping of the subcanopy topography, it is crucial to calibrate systematic errors of different strips through interferometric SAR (InSAR) DEM (digital elevation model) block adjustment. Furthermore, the BIOMASS mission will operate in repeat-pass interferometric mode, facing the atmospheric delay errors introduced by changes in atmospheric conditions. However, the existing block adjustment methods aim to calibrate systematic errors in bistatic mode, which can avoid possible errors from atmospheric effects through interferometry. Therefore, there is still a lack of systematic error calibration methods under the interference of atmospheric effects. To address this issue, we propose a block adjustment model considering atmospheric effects. Our model begins by employing the sub-aperture decomposition technique to form forward-looking and backward-looking interferograms, then multi-resolution weighted correlation analysis based on sub-aperture interferograms (SA-MRWCA) is utilized to detect atmospheric delay errors. Subsequently, the block adjustment model considering atmospheric effects can be established based on the SA-MRWCA. Finally, we use robust Helmert variance component estimation (RHVCE) to build the posterior stochastic model to improve parameter estimation accuracy. Due to the lack of spaceborne P-band data, this paper utilized L-band Advanced Land Observing Satellite (ALOS)-1 PALSAR data, which is also long-wavelength, to emulate systematic error calibration of the BIOMASS mission. We chose climatically diverse inland regions of Asia and the coastal regions of South America to assess the model’s effectiveness. The results show that the proposed block adjustment model considering atmospheric effects improved accuracy by 72.2% in the inland test site, with root mean square error (RMSE) decreasing from 10.85 m to 3.02 m. Moreover, the accuracy in the coastal test site improved by 80.2%, with RMSE decreasing from 16.19 m to 3.22 m. Full article

Lithium mining has become a controversial issue in the transition to green technologies due to the intervention in natural basins that impact the native flora and fauna in these environments. Large resources of this element are concentrated in Andean salt flats in South America, where extraction is much easier than in other geological configurations. The Pozuelos highland salt flat, located in northern Argentina (Salta’s Province), was chosen for this study due to the presence of different evaporitic crusts and its proven economic potential in lithium-rich brines. A comprehensive analysis of a 5.5-year-long time series of its microwave backscatter with Synthetic Aperture Radar (SAR) images yielded significant insights into the dynamics of their crusts. During a field campaign conducted near the acquisition of three SAR images (Sentinel-1, ALOS-2/PALSAR-2, and SAOCOM-1), field measurements were collected for computational modeling of the SAR response. The temporal backscattering coefficients for the crusts in the salt flat are directly linked to rainfall events, where changes in surface roughness, soil moisture, and water table depth represent the most critical variables. Field parameters were employed to model the backscattering response of the salt flat using the Small Slope Approximation (SSA) model. Salt concentration of the subsurface brine and the water table depth over the slightly to moderately roughed crusts were quantitatively derived from Bayesian inference of the ALOS-2/PALSAR-2 and SAOCOM-1 SAR backscattering coefficient data. The results demonstrated the potential for subsurface estimation with L-band dual-polarization images, constrained to crusts compatible with the feasibility range of the layered model. Full article

As a city undergoes large-scale construction and expansion, there is an urgent need to monitor the stability of the ground and infrastructure. The time-series InSAR technique is an effective tool for measuring surface displacements. However, interpreting these displacements in a built environment, where observed displacements consist of mixed signals, poses a challenge. This study uses principal component analysis (PCA) and the k-means clustering method for exploring deformation series within an unsupervised learning context. The PCA method extracts the dominant components in deformation series, whereas the clustering method identifies similar deformation series. This method was tested on Kunming City (KMC) using C-band Sentinel-1, X-band TerraSAR-X, and L-band ALOS-2 PALSAR-2 data acquired between 2017 to 2022. The experiment demonstrated that the suggested unsupervised learning approach can group PS points with similar kinematic characteristics. Five types of deformation kinematic characteristics were discovered in the three SAR datasets: upward, slight upward, stability, slight downward, and downward. According to the results, less than 20% of points exhibit significant motion trends, whereas 50% show small velocity values but still demonstrate movement trends. The remaining 30% are relatively stable. Similar clustering results were obtained from the three datasets using unsupervised methods, highlighting the effectiveness of identifying spatial–temporal patterns over the study area. Moreover, It was found that clustering based on kinematic characteristics enhances the interpretation of InSAR deformation, particularly for points with small deformation velocities. Finally, the significance of PCA decomposition in interpreting InSAR deformation was discussed, as it can better represent series with noise, enabling their accurate identification. Full article

In recent years, photovoltaic power generation and greenhouse planting (PPG&GP) have become effective approaches for reconstructing and restoring the ecological environment of old coal-mining industry bases, such as Xintai City. However, the ecological impacts or improvements of the PPG&GP projects and their daily operations on the local environment are still unclear. To solve these problems, this study retrieved the ground deformation velocities and time series of the study region by performing the Small-Baseline Subset (SBAS)-Interferometric Synthetic Aperture Radar (InSAR) technique on the Advanced Land Observing Satellite (ALOS) PALSAR and Sentinel-1 SAR datasets. With these deformation results, the spatial analysis indicated that the area of the subsidence region within the PPG&GP projects reached 10.70 km², with a magnitude of approximately −21.61 ± 12.10 mm/yr. Also, even though the ground deformations and their temporal changes were both visible in the construction and operation stages of the PPG&GP projects, the temporal analysis demonstrated that most observation points finally entered into the stationary phases in the late stage of the observation period. This phenomenon validated the effectiveness of the PPG&GP projects in enhancing the ground surface stability in coal-mining areas. Additionally, the precipitation, geological structure, increased coal-mining depths, and emergent agricultural modes were assumed to be the major impact factors controlling the ground deformation within the local PPG&GP projects. Finally, a novel risk assessment method with a designed index of IRA was utilized to classify the ground subsidence risks of the PPG&GP projects into three levels: Low (69.7%), Medium (16.9%), and High (9.4%). This study sheds a bright light on the ecological monitoring and risk management of the burgeoning industrial and agricultural infrastructures, such as the PPG&GP projects, constructed upon the traditional coal-mining areas in China from a multi-temporal InSAR perspective. Full article