Search Results (201)

The in-plane loading conditions of carbon fiber/epoxy composite (CFRP) and aluminum nested-tube-reinforced expanded polypropylene (EPP) blocks were empirically examined. This study used crashworthiness metrics to estimate the best design configuration under quasi-static loading rates. The experimental phase began with lateral loading testing of single and nested aluminum and CFRP specimen. In-plane crushing experiments were performed on EPP foam blocks reinforced with nested tubes. Both single and nested aluminum tubes had comparable force–response curves and maintained their load-bearing capacity throughout testing. Despite a load-carrying capacity drop above a particular displacement threshold, the CFRP specimens had superior specific energy absorption (SEA) values due to their lightweight nature. The triple-tube nested specimens with two smaller tubes exhibited the best SEA results (1.72 and 1.88 J/g, respectively, for the aluminum and CFRP nested samples). During concurrent tube deformation, the nested samples showed a synergistic connection that increased energy absorption, especially in the EPP foam blocks with reinforced tubes. The study also examined the effects of building nested specimens with aluminum exterior tubes and CFRP inner tubes, and vice versa. This method showed that CFRP tubes within aluminum outer tubes lowered specimen weight (from 93.1 g to 67.7 g) and energy absorption (from 160.2 J to 153.3 J). However, the weight reduction outweighed the energy absorption, increasing SEA values for certain composite material configurations (from 1.72 J/g to 2.26 J/g). Full article

In recent years, passive vehicle safety has become one of the major concerns for the automotive industry due to the considerable increase in the use of cars as a means of daily transport. Since real crash testing has a high financial cost, finite element simulations are generally used, which entail high computational cost and long simulation times. In this paper, we make use of the recent advances in the deep learning field to propose an affordable method to provide reliable approximations of the finite element simulator model that significantly reduce the computational load and time required. We compare the prediction performance in crash tests of different models, namely feed-forward neural networks and bayesian neural networks, as well as two multi-output regression methods. Our results show promising results, as deep learning models are able to drastically reduce the engineering costs while providing a feasible first approximation to the passenger’s injuries in a crash event, thus being a potential game changer in the vehicle safety design process. Full article

Road accidents cause considerable losses to road users and to society. The steady increase in the number of vehicles leads to increased traffic volume. Therefore, there is a real need to improve passenger safety by developing passive safety systems. This article presents the results of experimental tests of structures absorbing kinetic energy, which could be used in the front section of a vehicle in order to reduce the consequences of passenger car head-on collisions. A number of crash tests of selected structures were conducted under various load conditions. An analysis was carried out of parameters enabling the authors to assess the level of energy absorption by the absorbers made, and compare these to absorbers available on the market. The tests carried out made it possible to determine energy absorption capability of the crash boxes prepared and to identify a structure exhibiting the most advantageous properties from the point of view of its prospective use. Of all of the absorbers analysed, in the context of energy absorption, it was the absorber made of glass-fibre-reinforced polyphenylene sulphide that produced the most advantageous results. Nonetheless, favourable results were obtained for all of the structures tested. Full article

Based on the requirements of the narrow installation space of a train end, compact energy-absorbing travel, and huge energy suck, a shrink tube anti-creep device was designed. The crashworthiness of different structures was studied by means of a material test, a trolley test, and numerical simulation. For every 1 mm increase in tube wall thickness, 1 mm increase in the axial length of the friction cone, and 0.01 increase in the friction coefficient, the mean crushing force (MCF) increased by 45.1 kN, 13.5 kN, and 30.5 kN, respectively. When the cone angle of the shrink tube increased from α = 5° to α = 25°, the increase in the MCF with different thicknesses was about 600%. The MCF was most affected by the cone angle, followed by the wall thickness, the friction coefficient, and the axial length of the friction cone. The change in the contact length of the friction cone of the shrink tube under different structural parameters was compared. The contact length decreased with the increase in tube wall thickness and increased with the increase in angle. The variation rule of MCF was obtained to provide a reference for the development of genealogical products. Full article

The continuous increase in the operating speed of rail vehicles demands higher requirements for passive safety protection and lightweight design. This paper focuses on an energy-absorbing component (circular tubes) at the end of a train. Thin-walled carbon fiber-reinforced polymer (CFRP) tubes were prepared using the filament winding process. Through a combination of sled impact tests and finite element simulations, the effects of a chamfered trigger (Tube I) and embedded trigger (Tube II) on the impact response and crashworthiness of the structure were investigated. The results showed that both triggering methods led to the progressive end failure of the tubes. Tube I exhibited a mean crush force (MCF) of 891.89 kN and specific energy absorption (SEA) of 38.69 kJ/kg. In comparison, the MCF and SEA of Tube II decreased by 21.2% and 21.9%, respectively. The reason for this reduction is that the presence of the embedded trigger in Tube II restricts the expansion of the inner plies (plies 4 to 6), thereby affecting the overall energy absorption mechanism. Based on the validated finite element model, a modeling strategy study was conducted, including the failure parameters (DFAILT/DFAILC), the friction coefficient, and the interfacial strength. It was found that the prediction results are significantly influenced by modeling methods. Specifically, as the interfacial strength decreases, the tube wall is more prone to circumferential cracking or overall buckling under axial impact. Full article

In comparison to monolithic materials, cellular solids have superior energy absorption capabilities. Of particular interest within this category are the periodic lattice materials, which offer repeatable and highly customizable behavior, particularly in combination with advances in additive manufacturing technologies. In this paper, the crashworthiness of engineering multi-layer, multi-topology (MLMT) resin lattices is experimentally examined. First, the response of a single- and three-layer single topology cubic and octet lattices, at a relative density of 30%, is investigated. Then, the response of MLMT lattices is characterized and compared to those single-topology lattices. Crashworthiness data were collected for all topology arrangements, finding that while the three-layer cubic and octet lattices were capable of absorbing 9.8 J and 7.8 J, respectively, up to their respective densification points, the unique MLMT lattices were capable of absorbing more: 19.0 J (octet-cube-octet) and 22.4 J (cube-octet-cube). These values are between 94% and 187% greater than the single-topology clusters of the same mass. Full article

Due to their extraordinary qualities, including fire resistance, excellent crashworthiness, low thermal conductivity, permeability, non-toxicity, and reduced density, cellular materials have found extensive use in various engineering applications. This study uses a finite element analysis (FEA) to model the dynamic compressive behaviour of agglomerated cork to ascertain how its material density and stress relaxation behaviour are related. Adding the Mullins effect into the constitutive modelling of impact tests, its rebound phase and subsequent second impact were further examined and simulated. Quasi-static and dynamic compression tests were used to evaluate the mechanical properties of three distinct agglomerated cork composite samples to feed the numerical model. According to the results, agglomerated cork has a significant capacity for elastic rebound, especially under dynamic strain rates, with minimal permanent deformation. For instance, the minimum value of its bounce-back energy is 11.8% of the initial kinetic energy, and its maximum permanent plastic deformation is less than 10%. The material’s model simulation adequately depicts the agglomerated cork’s response to initial and follow-up impacts by accurately reproducing the material’s dynamic compressive behaviour. In terms of innovation, this work stands out since it tackles the rebounding phenomena, which was not previously investigated in this group’s prior publication, either numerically or experimentally. Thus, this group has expanded the research on cork materials’ attributes. Full article

The development of ultrahigh-strength steels with good ductility is crucial for improving the crashworthiness of automobiles. In the present work, the mechanical responses and deformation behaviors of 1.5 GPa ultrahigh-strength steel were systematically investigated over a wide range of strain rates, from 10⁻³ s⁻¹ to 10³ s⁻¹. The yield strength and tensile elongation at quasi-static strain rate (10⁻³ s⁻¹) were 1548 MPa and 20%, respectively. The yield strength increased to 1930 MPa at an extremely high strain rate (10³ s⁻¹), and the steel maintained excellent ductility, with values as high as 17%. It was found that the prevailing of the transformation-induced plasticity (TRIP) effect at quasi-static condition resulted in the formation of fresh martensite. This produced strong hetero-deformation-induced (HDI) stress and strain partitioning, contributing to the enhancement of strain hardening. The TRIP effect is remarkably suppressed under high strain rates, and thus the retained austenite with excellent deformation ability sustains the subsequent deformation, leading to superior ductility when the TRIP effect and HDI strengthening are retarded. Ultrahigh-strength steel with great strength–ductility combination over a wide range of strain rates has great potential in improving component performance while reducing vehicle weight. Full article

This article addresses manufacturing structures made via injection molding from biodegradable materials. The mentioned structures can be successfully used as energy-absorbing liners of all kinds of sports helmets, replacing the previously used expanded polystyrene. This paper is focused on injection technological tests and tensile tests (in quasi-static and dynamic conditions) of several composites based on a PLA matrix with the addition of other biodegradable softening agents, such as PBAT and TPS (the blends were prepared via melt blending using a screw extruder with mass compositions of 50:50, 30:70, and 15:85). Tensile tests showed a positive strain rate sensitivity of the mixtures and a dependence of the increase in the ratio of the dynamic to static yield stress on the increase in the share of the plastic component in the mixture. Technological tests showed that increasing the amount of the plasticizing additive by 35% (from 50% to 85%) results in a decrease in the minimal thickness of the thin-walled element that can be successfully injection molded by about 32% in the case of PLA/PBAT blends (from 0.22 mm to 0.15 mm) and by about 26% in the case of PLA/TPS blends (from 0.23 mm to 0.17 mm). Next, the thin-walled elements (dimensions of 55 × 55 × 20 mm) were manufactured and evaluated using a spring-loaded drop hammer. The 60 J impact energy was tested in accordance with the EN 1078 standard. The dynamic crushing test included checking the influence of the materials’ temperature (−20, 0, 20, and 40 °C) and the impact velocity. It was proven that the maximum deflection increases with increasing material temperature and an increase in the share of the plastic component in the mixture. The PLA15PBAT85 blend was selected as the most effective material in terms of its use as an energy-absorbing liner for sport helmets. Johnson–Cook and Cowper–Symonds material plasticizing models were constructed. Their use during dynamic FE simulation provided results that were in good agreement with those of the conducted experiment. Full article

The crashworthiness of electric vehicles depends on the response of lithium-ion cells to significant deformation and high strain rates. This study thoroughly explores the mechanical behavior due to damage of lithium-ion battery (LIB) cells, focusing on Lithium Nickel Manganese Cobalt Oxide (NMC) and Lithium Iron Phosphate (LFP) types during both quasi-static indentation and dynamic high-velocity penetration tests. Employing a novel approach, a hemispherical indenter addresses gaps in stress–strain data for pouch cells, considering crucial factors like strain rate/load rate and battery cell type. In the finite element method (FEM) analysis, the mechanical response is investigated in two stages. First, a viscoplastic model is developed in Abaqus/Standard to predict the indentation test. Subsequently, a thermomechanical model is formulated to predict the high-speed-impact penetration test. Considering the high plastic strain rate of the LIB cell, adiabatic heating effects are incorporated into this model, eliminating heat conduction between elements. Addressing a notable discrepancy from prior research, this work explores the substantial reduction in force observed when transitioning from a single cell to a stack of two cells. The study aims to unveil the underlying reasons and provide insights into the mechanical behavior of stacked cells. Full article

In order to study the influence of modular filled and composite material forms on the axial crushing and energy absorption properties of structures, modular filled composite structures were constructed, and innovatively applied to the inner side of double-hat beam (DHB) structures in automobiles. The modular filled structures comprise hexagonal, quadrilateral, and triangular sections. By analyzing the collision performance of modular filled DHB structures, significant enhancements were observed in both the sectional characteristics and the specific Mean Crushing Force of modular filled DHBs compared to the conventional double-hat beam structure. These advancements notably improved the plastic deformation characteristics of the structures. Additionally, dynamic weightlessness experiments were conducted to validate the accuracy of the simulation model. Among the proposed schemes, namely QU-5, HE-5, and TR-5, notable improvements in crashworthiness were identified. Specifically, crashworthiness indicators increased by 32.54%, 78.9%, and 116.53%. Compared with other thin-walled structures, modular filled composite DHBs have advantages in axial crushing and energy absorption. By optimizing layout characteristics, the modular filled structures will achieve significant lightweight and energy absorption performance improvements. This work has clear reference value for automotive engineers and scholars to further explore the axial crash safety, platform modularization, and lightweight design of vehicles. Full article

An innovative optimal design framework is developed aiming at enhancing the crashworthiness while ensuring the lightweight design of a hybrid two-dimensional triaxial braided composite (2DTBC) tube, drawing insights from the mesostructure of the composite material. To achieve these goals, we first compile the essential mechanical properties of the 2DTBC using a concentric cylinder model (CCM) and an analytical laminate model. Subsequently, a kriging surrogate model to elucidate the intricate relationship between design variables and macroscopic crashworthiness is developed and validated. Finally, employing multi-objective evolutionary optimization, we identify Pareto optimal solutions, highlighting that reducing the total fiber volume and increasing the glass fiber content in the total fiber volume are crucial for optimal crashworthiness and the lightweight design of the hybrid 2DTBC tube. By integrating advanced predictive modeling techniques with multi-objective evolutionary optimization, the proposed approach not only sheds light on the fundamental principles governing the crashworthiness of hybrid 2DTBC but also provides valuable insights for the design of robust and lightweight composite structures. Full article

The safety of lithium-ion batteries is critical to the safety of battery electric vehicles (BEVs). The purpose of this work is to develop a method to predict battery thermal runaway in full electric vehicle crash simulation. The thermal–electrical–mechanical-coupled finite element analysis is used to model an individual lithium-ion battery cell, a battery module, a battery pack, and a battery electric vehicle with 24 battery modules in a live circuit connection. The lithium-ion battery is modeled using a representative approach, with each internal battery component individually modeled to represent its geometric shape and realistic thermal, mechanical, and electrical properties. A resistance heating solver and Randles circuit model built with a generalized voltage source are used to simulate the electrical behavior of the battery. The thermal simulation of the battery considers the heat capacity and thermal conductivity of different cell components, as well as heat conduction, radiation, and convection at their interfaces. The mechanical property of battery cell and battery module models is validated using spherical punch tests. The electrical property of the battery cell and battery module models is verified against CircuitLab simulation in an external short-circuit test. The simulation results for the battery module’s internal resistance are consistent with both experimental data and literature values. The multi-physics coupling phenomenon is demonstrated with a cylindrical compression simulation on the battery module. The multi-physics BEV model with 24 live battery modules is used to simulate the external short-circuit test and the side pole impact test. The simulation run time is less than 24 h. The results demonstrated the feasibility of using a representative battery model and multi-physics analysis to predict battery thermal runaway in full electric vehicle crash analysis. Full article

Recent pressure on scientists and industries to use renewable resources, as well as the need to produce environmentally friendly materials, has led researchers and manufacturers to use natural fibres as possible reinforcements for their composites. Although they seem to be “ideal” due to their low cost, light weight and interesting energy absorption properties, they cannot be compared to synthetic fibres. To solve this problem, hybridization techniques can be considered, since the combination of synthetic and natural fibres allows for good performances. The aim of this study was to characterize the delamination and in-plane crashworthiness behaviour of carbon, flax and hybrid composites from experimental and numerical points of view. Double Cantilever Beam and Four-Point End Notched Flexure tests were carried out to determine the interlaminar fracture modes. In-plane crashworthiness tests were then performed to investigate the delamination phenomenon and the energy absorption capacity considering two different geometries: flat and corrugated. Numerical models were created and validated on both geometries, comparing the obtained load–displacement curves with the experimental ones. Crush force efficiency and specific energy absorption were quantified to provide a proper comparison of the investigated materials. The good results achieved represent a promising starting point for the design of future and more complex structures. Full article

By means of material testing, truck testing and numerical simulation, the structural parameters of the shrink tube anti-climb device for high-speed trains were determined. The effects of cone angle, tube thickness, friction coefficient and axial length of the friction cone on the crashworthiness of the shrink tube were studied, and the main causes were analyzed. Using cone angle and tube wall thickness as input variables, and peak crush force, mean crash force and specific energy absorption as crashworthiness indexes, a proxy model was constructed using a radial basis function. The global response surface methodology was adopted to optimize the design of the shrink tube’s structural parameters. The results showed that the crashworthiness of the shrink tube was positively correlated with the cone angle, the thickness of the shrink tube and the friction coefficient, and the influence decreased successively, while the influence was negatively correlated with the axial length of the friction cone, which had the least influence. Through the optimized design, the peak force of the shrink tube increased by only 5.41%, while the specific energy absorption increased by 31.03%. Additionally, the mean force was closer to the technical requirements of 600 kN, and the crashworthiness was optimized. Full article