Search Results (103)

Deep learning techniques have flourished in recent years and have shown great potential in ground-penetrating radar (GPR) data interpretation. However, obtaining sufficient training data is a great challenge. This paper proposes an intelligent recognition method based on slicing-aided hyper inference (SAHI) for GPR images. Firstly, for the problem of insufficient samples of GPR images with structural loose distresses, data augmentation is carried out based on deep convolutional generative adversarial networks (DCGAN). Since distress features occupy fewer pixels on the original image, to allow the model to pay greater attention to the distress features, it is necessary to crop the original images centered on the distress labeling boxes first, and then input the cropped images into the model for training. Then, the YOLOv5 model is used for distress detection and the SAHI framework is used in the training and inference stages. The experimental results show that the detection accuracy is improved by 5.3% after adding the DCGAN-generated images, which verifies the effectiveness of the DCGAN-generated images. The detection accuracy is improved by 10.8% after using the SAHI framework in the training and inference stages, which indicates that SAHI is a key part of improving detection performance, as it significantly improves the ability to recognize distress. Full article

With the large-scale penetration of distributed generation (DG), the volatility problems of active distribution networks (ADNs) have become more prominent, which can no longer be met by traditional regulation means and need to be regulated by introducing flexible resources. Soft open points (SOP) and energy storage systems (ESS) can regulate the tidal currents on spatial and temporal scales, respectively, to improve the flexibility of ADN. To this end, in-depth consideration of DG admission is given to establish flexibility assessment indicators from the power side of ADN. The conditional deep convolution generative adversarial network (C-DCGAN) is used to generate the output scenario of DG. On this basis, the SOP and ESS two-layer planning models, which take account of the potential for improvement in the flexibility of ADN, are constructed. Among them, the upper layer is the site selection and volume determination layer, which considers the economy of the system with the optimization objective of minimizing the annual integrated cost; the lower layer is the operation optimization layer, which considers the flexibility of the system and takes the highest average daily flexibility level as the optimization objective. The planning model is solved using genetic algorithm-particle swarm optimization (GA-PSO) and second-order cone programming (SOCP). The case analysis verifies the rationality and effectiveness of the planning model. Full article

Addressing the challenge of limited samples arising from the difficulty and high cost of pavement crack, image collecting and labeling, along with the inadequate ability of traditional data augmentation methods to enhance sample feature space, we propose VDCrackGAN, a generative adversarial network combining VAE and DCGAN, specifically tailored for pavement crack data augmentation. Furthermore, spectral normalization is incorporated to enhance the stability of network training, and the self-attention mechanism Swin Transformer is integrated into the network to further improve the quality of crack generation. Experimental outcomes reveal that in comparison to the baseline DCGAN, VDCrackGAN achieves notable improvements of 13.6% and 26.4% in the Inception Score (IS) and Fréchet Inception Distance (FID) metrics, respectively. Full article

Characterizing the microstructures of steel subjected to heat treatments is crucial in the metallurgical industry for understanding and controlling their mechanical properties. In this study, we present a novel approach for generating images of steel microstructures that mimic those obtained with optical microscopy, using the deep learning technique of generative adversarial networks (GAN). The experiments were conducted using different hyperparameter configurations, evaluating the effect of these variations on the quality and fidelity of the generated images. The obtained results show that the images generated by artificial intelligence achieved a resolution of 512 × 512 pixels and closely resemble real microstructures observed through conventional microscopy techniques. A precise visual representation of the main microconstituents, such as pearlite and ferrite in annealed steels, was achieved. However, the performance of GANs in generating images of quenched steels with martensitic microstructures was less satisfactory, with the synthetic images not fully replicating the complex, needle-like features characteristic of martensite. This approach offers a promising tool for generating steel microstructure images, facilitating the visualization and analysis of metallurgical samples with high fidelity and efficiency. Full article

To address the difficulty in obtaining a large number of labeled jamming signals in complex electromagnetic environments, this paper proposes a small-sample communication jamming signal recognition method based on WDCGAN-SA (Wasserstein Deep Convolution Generative Adversarial Network–Self Attention) and C-ResNet (Convolution Block Attention Module–Residual Network). Firstly, leveraging the DCGAN architecture, we integrate the Wasserstein distance measurement and gradient penalty mechanism to design the jamming signal generation model WDCGAN for data augmentation. Secondly, we introduce a self-attention mechanism to make the generation model focus on global correlation features in time–frequency maps while optimizing training strategies to enhance the quality of generated samples. Finally, real samples are mixed with generated samples and fed into the classification network, incorporating cross-channel and spatial information in the classification network to improve jamming signal recognition rates. The simulation results demonstrate that under small-sample conditions with a Jamming-to-Noise Ratio (JNR) ranging from −10 dB to 10 dB, the proposed algorithm significantly outperforms GAN, WGAN and DCGAN comparative algorithms in recognizing six types of communication jamming signals. Full article

Solar energy is an important renewable energy source, and the efficiency of solar panels is crucial. However, tiny cracks and dark spots, defects of panels, can significantly affect power generation performance. To solve the defect identification problem of solar panels, an intelligent electroluminescence (EL) image classification method based on a random network (RandomNet50) is proposed. The randomly connected network module is designed by combining dropout and feature reuse strategies. Feature reuse in random networks optimizes the network structure and improves the feature utilization efficiency. The network model uses geometric transformation and the deep convolution generative adversarial network (DCGAN) method to enhance few-shot EL images (400) with different states. The comparison experiment shows that the RandomNet50 has a good classification effect on the enhanced images. The accuracy of the CIFAR-10/EL dataset (96.15%/88.23%) is better than the residual and dense networks. The method has high classification accuracy and provides strong technical support in the field of solar cells. Full article

Disease prediction is greatly challenged by the scarcity of datasets and privacy concerns associated with real medical data. An approach that stands out to circumvent this hurdle is the use of synthetic data generated using Generative Adversarial Networks (GANs). GANs can increase data volume while generating synthetic datasets that have no direct link to personal information. This study pioneers the use of GANs to create synthetic datasets and datasets augmented using traditional augmentation techniques for our binary classification task. The primary aim of this research was to evaluate the performance of our novel Conditional Deep Convolutional Neural Network (C-DCNN) model in classifying brain tumors by leveraging these augmented and synthetic datasets. We utilized advanced GAN models, including Conditional Deep Convolutional Generative Adversarial Network (DCGAN), to produce synthetic data that retained essential characteristics of the original datasets while ensuring privacy protection. Our C-DCNN model was trained on both augmented and synthetic datasets, and its performance was benchmarked against state-of-the-art models such as ResNet50, VGG16, VGG19, and InceptionV3. The evaluation metrics demonstrated that our C-DCNN model achieved accuracy, precision, recall, and F1 scores of 99% on both synthetic and augmented images, outperforming the comparative models. The findings of this study highlight the potential of using GAN-generated synthetic data in enhancing the training of machine learning models for medical image classification, particularly in scenarios with limited data available. This approach not only improves model accuracy but also addresses privacy concerns, making it a viable solution for real-world clinical applications in disease prediction and diagnosis. Full article

The online detection of surface defects in irregularly shaped products such as rawhide sticks, a kind of pet food, is still a challenge for the food industry. Developing deep learning-based detection algorithms requires a diverse defect database, which is crucial for artificial intelligence applications. Acquiring a sufficient amount of realistic defect data is challenging, especially during the beginning of product production, due to the occasional nature of defects and the associated costs. Herein, we present a novel image data augmentation method, which is used to generate a sufficient number of defect images. A Deep Convolution Generation Adversarial Network (DCGAN) model based on a Residual Block (ResB) and Hybrid Attention Mechanism (HAM) is proposed to generate massive defect images for the training of deep learning models. Based on a DCGAN, a ResB and a HAM are utilized as the generator and discriminator in a deep learning model. The Wasserstein distance with a gradient penalty is used to calculate the loss function so as to update the model training parameters and improve the quality of the generated image and the stability of the model by extracting deep image features and strengthening the important feature information. The approach is validated by generating enhanced defect image data and conducting a comparison with other methods, such as a DCGAN and WGAN-GP, on a rawhide stick experimental dataset. Full article

The field of computer vision has been focusing on achieving accurate three-dimensional (3D) object representations from a single two-dimensional (2D) image through deep artificial neural networks. Recent advancements in 3D shape reconstruction techniques that combine structured light and deep learning show promise in acquiring high-quality geometric information about object surfaces. This paper introduces a new single-shot 3D shape reconstruction method that uses a nonlinear fringe transformation approach through both supervised and unsupervised learning networks. In this method, a deep learning network learns to convert a grayscale fringe input into multiple phase-shifted fringe outputs with different frequencies, which act as an intermediate result for the subsequent 3D reconstruction process using the structured-light fringe projection profilometry technique. Experiments have been conducted to validate the practicality and robustness of the proposed technique. The experimental results demonstrate that the unsupervised learning approach using a deep convolutional generative adversarial network (DCGAN) is superior to the supervised learning approach using UNet in image-to-image generation. The proposed technique’s ability to accurately reconstruct 3D shapes of objects using only a single fringe image opens up vast opportunities for its application across diverse real-world scenarios. Full article

Ear recognition is a complex research domain within biometrics, aiming to identify individuals using their ears in uncontrolled conditions. Despite the exceptional performance of convolutional neural networks (CNNs) in various applications, the efficacy of deep ear recognition systems is nascent. This paper proposes a two-step ear recognition approach. The initial step employs deep convolutional generative adversarial networks (DCGANs) to enhance ear images. This involves the colorization of grayscale images and the enhancement of dark shades, addressing visual imperfections. Subsequently, a feature extraction and classification technique, referred to as Mean-CAM-CNN, is introduced. This technique leverages mean-class activation maps in conjunction with CNNs. The Mean-CAM approach directs the CNN to focus specifically on relevant information, extracting and assessing only significant regions within the entire image. The process involves the implementation of a mask to selectively crop the pertinent area of the image. The cropped region is then utilized to train a CNN for discriminative classification. Extensive evaluations were conducted using two ear recognition datasets: mathematical analysis of images (MAI) and annotated web ears (AWEs). The experimental results indicate that the proposed approach shows notable improvements and competitive performance: the Rank-1 recognition rates are 100.00% and 76.25% for MAI and AWE datasets, respectively. Full article

Cracks in tunnel lining surfaces directly threaten structural integrity; therefore, regular inspection of cracks is essential. Lightweight convolutional neural networks (LCNNs) have recently offered a promising alternative to conventional manual inspection. However, the effectiveness of LCNNs is still adversely affected by the lack of sufficient crack images, which limits the potential detection performance. In this paper, transfer learning was used to optimize deep convolutional generative adversarial networks (DCGANs) for crack image synthesis to significantly improve the accuracy of LCNNs. In addition, an improved LCNN model named ShuffleNetV2-1.0-SE was proposed, incorporating the squeeze–excitation (SE) attention mechanism into ShuffleNetV2-1.0 and realizing highly accurate classification results while maintaining lightness. The results show that the DCGAN-based data enhancement method can significantly improve the classification accuracy of ShuffleNetV2-1.0-SE for tunnel lining cracks. ShuffleNetV2-1.0-SE achieves an accuracy of 98.14% on the enhanced dataset, which is superior to multiple advanced LCNN models. Full article

In this study, we introduce an innovative methodology for the detection of helmet usage violations among motorcyclists, integrating the YOLOv8 object detection algorithm with deep convolutional generative adversarial networks (DCGANs). The objective of this research is to enhance the precision of existing helmet violation detection techniques, which are typically reliant on manual inspection and susceptible to inaccuracies. The proposed methodology involves model training on an extensive dataset comprising both authentic and synthetic images, and demonstrates high accuracy in identifying helmet violations, including scenarios with multiple riders. Data augmentation, in conjunction with synthetic images produced by DCGANs, is utilized to expand the training data volume, particularly focusing on imbalanced classes, thereby facilitating superior model generalization to real-world circumstances. The stand-alone YOLOv8 model exhibited an F1 score of 0.91 for all classes at a confidence level of 0.617, whereas the DCGANs + YOLOv8 model demonstrated an F1 score of 0.96 for all classes at a reduced confidence level of 0.334. These findings highlight the potential of DCGANs in enhancing the accuracy of helmet rule violation detection, thus fostering safer motorcycling practices. Full article

The emergence of integrated positioning, communication, and sensing technologies has paved the way for a surge in connected and autonomous vehicles. The control system has been successful in reliable and fast transmission. However, practical applications face security risks, especially data tampering and spoofing attacks. To improve the resilience of the system against potential attacks, we attempt to leverage a generative adversarial network learning-assisted authentication framework (GAF). In addition to proposing a new method for validating vehicles, we also introduce a new architectural innovation in the generator–discriminator pair to achieve improved results. The generator sub-network is constructed using an advanced convolutional neural network, whereas the discriminator is designed to leverage global and local information to determine whether a signal is real or fake. On this basis, we propose a signal enhancement-based authentication method, a deep convolutional generative adversarial network (DCGAN). Experimental results using the National Institute of Standards and Technology (NIST) dataset show that the proposed method is effective in denoising and improving the detection performance. Full article

Motor imagery electroencephalography (EEG) signals have garnered attention in brain–computer interface (BCI) research due to their potential in promoting motor rehabilitation and control. However, the limited availability of labeled data poses challenges for training robust classifiers. In this study, we propose a novel data augmentation method utilizing an improved Deep Convolutional Generative Adversarial Network with Gradient Penalty (DCGAN-GP) to address this issue. We transformed raw EEG signals into two-dimensional time–frequency maps and employed a DCGAN-GP network to generate synthetic time–frequency representations resembling real data. Validation experiments were conducted on the BCI IV 2b dataset, comparing the performance of classifiers trained with augmented and unaugmented data. Results demonstrated that classifiers trained with synthetic data exhibit enhanced robustness across multiple subjects and achieve higher classification accuracy. Our findings highlight the effectiveness of utilizing a DCGAN-GP-generated synthetic EEG data to improve classifier performance in distinguishing different motor imagery tasks. Thus, the proposed data augmentation method based on a DCGAN-GP offers a promising avenue for enhancing BCI system performance, overcoming data scarcity challenges, and bolstering classifier robustness, thereby providing substantial support for the broader adoption of BCI technology in real-world applications. Full article

Deep learning techniques have made certain breakthroughs in direction-of-arrival (DOA) estimation in recent years. However, most of the current deep-learning-based DOA estimation methods view the direction finding problem as a grid-based multi-label classification task and require multiple samplings with a uniform linear array (ULA), which leads to grid mismatch issues and difficulty in ensuring accurate DOA estimation with insufficient sampling and in underdetermined scenarios. In order to solve these challenges, we propose a new DOA estimation method based on a deep convolutional generative adversarial network (DCGAN) with a coprime array. By employing virtual interpolation, the difference co-array derived from the coprime array is extended to a virtual ULA with more degrees of freedom (DOFs). Then, combining with the Hermitian and Toeplitz prior knowledge, the covariance matrix is retrieved by the DCGAN. A backtracking method is employed to ensure that the reconstructed covariance matrix has a low-rank characteristic. We performed DOA estimation using the MUSIC algorithm. Simulation results demonstrate that the proposed method can not only distinguish more sources than the number of physical sensors but can also quickly and accurately solve DOA, especially with limited snapshots, which is suitable for fast estimation in mobile agent localization. Full article