Search Results (354)

The examination of ampacity in overhead transmission lines offers a comprehensive overview, covering its definition, thermal evaluation methodologies, standards, practical applications, and the potential of high-temperature low-sag (HTLS) conductors. By navigating through static and dynamic approaches to thermal evaluation and detailing methodologies prescribed by international standards like those from CIGRE and IEEE, this study provides a solid understanding of how ampacity is determined and optimized. Furthermore, the exploration of HTLS conductors introduces a forward-looking perspective on enhancing transmission capacity while mitigating the need for extensive infrastructure modifications. Through an analysis of regional considerations and preferences using Slovak standards and CIGRE Technical Brochure 601, insights are provided into how environmental factors influence transmission line performance. The analysis of the transition from traditional ACSR (Aluminium Conductor Steel-Reinforced) to advanced ACCC (Aluminium Conductor Composite Core) conductors demonstrates the tangible benefits of adopting advanced conductor technologies in real-world scenarios. Full article

A novel tick-borne orthonairovirus called the Yezo virus (YEZV), primarily transmitted by the Ixodes persulcatus tick, has been recently discovered and poses significant threats to human health. The YEZV is considered endemic in Japan and China. Clinical symptoms associated with this virus include thrombocytopenia, fatigue, headache, leukopenia, fever, depression, and neurological complications ranging from mild febrile illness to severe outcomes like meningitis and encephalitis. At present, there is no treatment or vaccine readily accessible for this pathogenic virus. Therefore, this research employed an immunoinformatics approach to pinpoint potential vaccine targets within the YEZV through an extensive examination of its structural proteins. Three structural proteins were chosen using specific criteria to pinpoint T-cell and B-cell epitopes, which were subsequently validated through interferon-gamma induction. Six overlapping epitopes for cytotoxic T-lymphocytes (CTL), helper T-lymphocytes (HTL), and linear B-lymphocytes (LBL) were selected to construct a multi-epitope vaccine, achieving a 92.29% coverage of the global population. These epitopes were then fused with the 50S ribosomal protein L7/L12 adjuvant to improve protection against international strains. The three-dimensional structure of the designed vaccine construct underwent an extensive evaluation through structural analysis. Following molecular docking studies, the YEZV vaccine construct emerged as a candidate for further investigation, showing the lowest binding energy (−78.7 kcal/mol) along with favorable physiochemical and immunological properties. Immune simulation and molecular dynamics studies demonstrated its stability and potential to induce a strong immune response within the host cells. This comprehensive analysis indicates that the designed vaccine construct could offer protection against the YEZV. It is crucial to conduct additional in vitro and in vivo experiments to verify its safety and effectiveness. Full article

Perovskite solar cells (PSCs) are considered the most promising photovoltaic devices to replace silicon-based solar cells because of their low preparation cost and high photoelectric conversion efficiency (PCE). Reducing defects in perovskite films is an effective means to improve the efficiency of PSCs. In this paper, a lead chelator was selected and mixed into hole transport layers (HTLs) to design and prepare mesoporous PSCs with the structure of ITO/PTAA(BCP)/Al₂O₃/PVK/PCBM/BCP/Ag, and its modification effect on the buried interface at the bottom of the perovskite layer in the mesoporous structure was explored. The experimental results show that in the presence of mesoporous alumina, the lead chelator can still play a role in modifying the bottom of the perovskite film. The use of lead chelator as passivation material added to the HTL can effectively reduce the residue of dimethyl sulfoxide (DMSO) and decrease the defects at the bottom of the perovskite film, which dramatically improves the device performance. The PCE of the device is increased from 18.03% to 20.78%, which is an increase of 15%. The work in this paper provides an effective method to enhance the performance of PSCs. Full article

With the “Talents Internship program” established by the Austrian Research Promotion Agency (FFG, Österreichische Forschungsförderungsgesellschaft), 14- to 17-year-old students from various school types visited the Natural History Museum and the Kuratorium Pfahlbauten in summer 2022 to gain practical experience in research. The internship focused on a sustainability approach, discussing recycling methods, the sustainable use of resources and the circular economy in prehistory. The UNESCO World Heritage “Prehistoric Pile Dwellings around the Alps” was used as a research area for the project. The project also aimed to make the content developed by the students available to the public as a digital media tool. The pupils brought an illustration of a prehistoric lake shore settlement to life and created an interactive image available at the website of Kuratorium Pfahlbauten. Various scenes of the illustration have been augmented with animations created by the students of HTL Spengergasse in Vienna. Students from federal secondary schools from Vienna (Stubenbastei) and Upper Austria (Traun) researched the information about the objects and wrote texts that, as a description of the animated videos, introduce the users to the prehistoric artifact and explain the recycling process behind it. The students worked independently using the scientific literature, 140-year-old inventory books and 6000-year-old objects from the collection of the Natural History Museum Vienna. The activities and the supporting program within the internship were recorded by the students in blog posts, available at the Pfahlbauten-Blog. The co-creative approach of the FFG Talent Internship made it possible to introduce a group of school students to the process of scientific work and the communication of results. It was honored with the Creative App Award at CHNT 2023. Full article

In recent years, two-dimensional (2D) materials have been widely used for various applications due to their low cost, high charge carrier mobility, and tunable electronic structure. Here, in this study, we present the application of molybdenum disulfide (MoS₂) used as a hole transport layer (HTL) material for fullerene (FA) and non-fullerene (NFA)-based organic photovoltaic (OPV) devices. A numerical simulation is carried out for these types of solar cells, and the SCAPS-1D software tool is used. Our study is specifically focused on the impact of thickness, the optimization of interface engineering, and the effect of high-temperature analysis to improve the output characteristics. The influence of interface defects between the HTL/active layer and the active layer/ETL (electron transport layer) is also contemplated. After optimization, the obtained power conversion efficiency (PCE) of these NFA- and FA-based devices is reported as 16.38% and 9.36%, respectively. A reflection coating study is also carried out to improve the power conversion efficiency of these devices. Here, the presented results demonstrate that molybdenum disulfide (MoS₂) as a 2D material can be successfully used as an HTL material for high-efficiency OPV devices, both for fullerene (FA)- and non-fullerene (NFA)-based solar cells. Full article

This study explores the potential of copper-doped nickel oxide (Cu:NiO) as a hole transport layer (HTL) in flexible photovoltaic (PV) devices using a combined first-principles and finite element analysis approach. Density functional theory (DFT) calculations reveal that Cu doping introduces additional states in the valence band of NiO, leading to enhanced charge transport. Notably, Cu:NiO exhibits a direct band gap (reduced from 3.04 eV in NiO to 1.65 eV in the stable supercell structure), facilitating the efficient hole transfer from the active layer. Furthermore, the Fermi level shifts towards the valence band in Cu:NiO, promoting hole mobility. This translates to an improved photovoltaic performance, with Cu:NiO-based HTLs achieving ~18% and ~9% power conversion efficiencies (PCEs) in perovskite and poly 3-hexylthiophene: 1-3-methoxycarbonyl propyl-1-phenyl 6,6 C 61 butyric acid methyl ester (P3HT:PCBM) polymer solar cells, respectively. Finally, a finite element analysis demonstrates the potential of these composite HTLs with Poly 3,4-ethylene dioxythiophene)—polystyrene sulfonate (PEDOT:PSS) in flexible electronics design and the optimization of printing processes. Overall, this work highlights Cu:NiO as a promising candidate for high-performance and flexible organic–inorganic photovoltaic cells. Full article

Algae is a promising sustainable feedstock for the generation of bio-crude oil, which is a sustainable alternative to fossil fuels, through the thermochemical process of hydrothermal liquefaction (HTL). However, this process also generates carbon particles (algae-derived carbon, ADC) as a significant byproduct. Herein, we report a brand-new and value-added use of ADC particles as a reinforcing agent for epoxy matrix composites (EMCs). ADC particles were synthesized through HTL processing of Chlorella vulgaris (a green microalgae) and characterized for morphology, average size, specific surface area, porosity, and functional groups. The ADC particles were subsequently integrated into a representative epoxy resin (EPON 862) as a reinforcing filler at loading levels of 0.25%, 0.5%, 1%, and 2% by weight. The tensile, flexural, and Izod impact properties, as well as the thermal stability, of the resulting EMCs were evaluated. It is revealed that the ADC particles are a sustainable and effective reinforcing agent for EMCs at ultra-low loading. Specifically, the ADC-reinforced EMC with 1 wt.% ADC showed improvements of ~24%, ~30%, ~31%, and ~57% in tensile strength, Young’s modulus, elongation at break, and work of fracture (WOF), respectively, and improvements of ~10%, ~37%, ~24%, and ~39% in flexural strength, flexural modulus, flexural elongation at break, and flexural WOF, respectively, as well as an improvement of ~54% in Izod impact strength, compared to those corresponding properties of neat epoxy. In the meantime, the thermal decomposition temperatures at 60% and 80% weight loss of the abovementioned ADC-reinforced EMC increased from 410 °C to 415 °C and from 448 °C to 515 °C in comparison with those of neat epoxy. This study highlighted the potential of sustainable ADC particles as a reinforcing agent in the field of polymer matrix composite materials, which represented a novel and sustainable approach that would mitigate greenhouse gas remission and reduce reliance on nonrenewable reinforcing fillers in the polymer composite industry. Full article

Due to the optical properties of the electron transport layer (ETL) and hole transport layer (HTL), inverted perovskite solar cells can perform better than traditional perovskite solar cells. It is essential to compare both types to understand their efficiencies. In this article, we studied inverted perovskite solar cells with NiO_x/CH₃NH₃Pb₃/ETL (ETL = MoO₃, TiO₂, ZnO) structures. Our results showed that the optimal thickness of NiO_x is 80 nm for all structures. The optimal perovskite thickness is 600 nm for solar cells with ZnO and MoO₃, and 800 nm for those with TiO₂. For the ETLs, the best thicknesses are 100 nm for ZnO, 80 nm for MoO₃, and 60 nm for TiO₂. We found that the efficiencies of inverted perovskite solar cells with ZnO, MoO₃, and TiO₂ as ETLs, and with optimal layer thicknesses, are 30.16%, 18.69%, and 35.21%, respectively. These efficiencies are 1.5%, 5.7%, and 1.5% higher than those of traditional perovskite solar cells. Our study highlights the potential of optimizing layer thicknesses in inverted perovskite solar cells to achieve higher efficiencies than traditional structures. Full article

We report a transformative epoxy system with a microalgae-derived bio-binder from hydrothermal liquefaction processing (HTL). The obtained bio-binder not only served as a curing agent for conventional epoxy resin (e.g., EPON 862), but also acted as a modifying agent to enhance the thermal and mechanical properties of the conventional epoxy resin. This game-changing epoxy/bio-binder system outperformed the conventional epoxy/hardener system in thermal stability and mechanical properties. Compared to the commercial EPON 862/EPIKURE W epoxy product, our epoxy/bio-binder system (35 wt.% bio-binder addition with respect to the epoxy) increased the temperature of 60% weight loss from 394 °C to 428 °C and the temperature of maximum decomposition rate from 382 °C to 413 °C, while the tensile, flexural, and impact performance of the cured epoxy improved in all cases by up to 64%. Our research could significantly impact the USD 38.2 billion global market of the epoxy-related industry by not only providing better thermal and mechanical performance of epoxy-based composite materials, but also simultaneously reducing the carbon footprint from the epoxy industry and relieving waste epoxy pollution. Full article

In this study, we explored the potential of exfoliated transition metal dichalcogenides (TMDs) as innovative spray-coated hole transport layers (HTLs) in organic photovoltaics (OPVs), addressing the need for efficient and stable materials in solar cell technology. This research was motivated by the need for alternative HTLs that can offer enhanced performance under varying lighting conditions, particularly in indoor environments. Employing UV-visible absorption and Raman spectroscopy, we characterized the optical properties of MoS₂, MoSe₂, WS₂, and WSe₂, confirming their distinct excitonic transitions and direct bandgap features. The nanocrystalline nature of these TMDs, revealed through XRD patterns and crystallite size estimation using the Scherrer method, significantly contributes to their enhanced physical properties and operational efficiency as HTLs in OPVs. These TMDs were then integrated into OPV devices and evaluated under standard solar and indoor lighting conditions, to assess their effectiveness as HTLs. The results demonstrated that MoS₂, in particular, displayed remarkable performance, rivalling traditional HTL materials like MoO₃. It maintained high power conversion efficiency across a spectrum of light intensities, illustrating its versatility for both outdoor and indoor applications. Additionally, MoS₂ showed superior stability over extended periods, suggesting its potential for long-term usage in OPVs. This study contributes significantly to the field of photovoltaic materials, presenting TMDs, especially MoS₂, as promising candidates for efficient and stable OPVs in diverse lighting conditions, thereby broadening the scope of solar cell applications. Full article

Hydrothermal co-liquefaction (co-HTL) is a process involving two sources of biomasses aiming at bio-crude production. Since there is a lack of studies performed with sugarcane bagasse and residual soybean oil, this study investigated different conditions for the co-HTL of these biomasses, with and without the presence of ethanol as a co-solvent to maximize the bio-crude yield. All co-HTL reactions were carried out in a 300 mL Parr^® reactor at temperatures ranging from 200 to 300 °C. After the reaction, a vacuum filtration was performed to separate the bio-char, later washed with ethanol to extract heavy bio-crude, while the liquid-phase was mixed with dichloromethane to recover light bio-crude. Bio-crude yields of around 95 wt.% were obtained at 300 °C using ethanol and water as solvents. The highest bio-char yield (16.6 wt.%) was achieved when using only sugarcane bagasse as the substrate, without the presence of soybean oil. Bio-crude samples obtained at higher temperatures (280 °C and 300 °C) using ethanol as a hydrogen donor presented higher contents of both free fatty acids and fatty acid ethyl esters. This work presents a promising process to produce high-quality bio-crude using an abundant feedstock (sugarcane bagasse) in the presence of a lipid source which could cause environmental problems if poorly handled. Full article

Background/Objectives: Hepatitis E virus (HEV) is an RNA virus recognized to be spread mainly by fecal-contaminated water. Its infection is known to be a serious threat to public health globally, mostly in developing countries, in which Africa is one of the regions sternly affected. An African-based vaccine is necessary to actively prevent HEV infection. Methods: This study developed an in silico epitope-based subunit vaccine, incorporating CTL, HTL, and BL epitopes with suitable linkers and adjuvants. Results: The in silico-designed vaccine construct proved immunogenic, non-allergenic, and non-toxic and displayed appropriate physicochemical properties with high solubility. The 3D structure was modeled and subjected to protein docking with Toll-like receptors 2, 3, 4, 6, 8, and 9, which showed a stable binding efficacy, and the dynamics simulation indicated steady interaction. Furthermore, the immune simulation predicted that the designed vaccine would instigate immune responses when administered to humans. Lastly, using a codon adaptation for the E. coli K12 bacterium produced optimum GC content and a high CAI value, which was followed by in silico integration into a pET28 b (+) cloning vector. Conclusions: Generally, these results propose that the design of an epitope-based subunit vaccine can function as an outstanding preventive vaccine candidate against HEV, although validation techniques via in vitro and in vivo approaches are required to justify this statement. Full article

In order to surmount the Shockley–Queisser efficiency barrier of single-junction solar devices, tandem solar cells (TSCs) have shown a potential solution. Organic and Si materials can be promising candidates for the front and rear cells in TSCs due to their non-toxicity, cost-effectiveness, and possible complementary bandgap properties. This study researches a flexible two-terminal (2-T) organic/Si TSC through TCAD simulation. In the proposed configuration, the organic solar cell (OSC), with a photoactive optical bandgap of 1.78 eV, serves as the front cell, while the rear cell comprises a Si cell based on a thin 70 μm wafer, with a bandgap energy of 1.12 eV. The individual standalone front and bottom cells, upon calibration, demonstrate power conversion efficiencies (PCEs) of 11.11% and 22.69%, respectively. When integrated into a 2-T organic/Si monolithic TSC, the resultant tandem cell achieves a PCE of 20.03%, indicating the need for optimization of the top organic cell to beat the efficiency of the bottom Si cell. To enhance the performance of the OSC, some design ideas are presented. Firstly, the OSC is designed by omitting the organic hole transport layer (HTL). Consequently, through engineering the front contact work function, the PCE is enhanced. Moreover, the influence of varying the absorber defect density of the top cell on TSC performance is investigated. Reduced defect density led to an overall efficiency improvement of the tandem cell to 23.27%. Additionally, the effects of the variation of the absorber thicknesses of the top and rear cells on TSC performance metrics are explored. With the matching condition design, the tandem efficiency is enhanced to 27.60%, with V_OC = 1.81 V and J_SC = 19.28 mA/cm². The presented simulation results intimate that the OSC/Si tandem design can find applications in wearable electronics due to their flexibility, environmentally friendly design, and high efficiency. Full article

In this study, a novel perovskite solar cell (PSC) architecture is presented that utilizes an HTL-free configuration with formamide tin iodide (FASnI₃) as the active layer and fullerene (C60) as the electron transport layer (ETL), which represents a pioneering approach within the field. The elimination of hole transport layers (HTLs) reduces complexity and cost in PSC heterojunction structures, resulting in a simplified and more cost-effective PSC structure. In this context, an HTL-free tin HC(NH₂)₂SnI₃-based PSC was simulated using the solar cell capacitance simulator (SCAPS) within a one-dimensional framework. Through this approach, the device performance of this novel HTL-free FASnI₃-based PSC structure was engineered and evaluated. Key performance parameters, including the open-circuit voltage (V_oc), short-circuit current density (J_sc), fill factor (FF), power conversion efficiency (PCE), I-V characteristics, and quantum efficiency (QE), were systematically assessed through the modulation of physical parameters across various layers of the device. A preliminary analysis indicated that the HTL-free configuration exhibited improved I-V characteristics, with a PCE increase of 1.93% over the HTL configuration due to improved electron and hole extraction characteristics, reduced current leakage at the back contact, and reduced trap-induced interfacial recombination. An additional boost to the device’s key performance parameters has been achieved through the further optimization of several physical parameters, such as active layer thickness, bulk and interface defects, ETL thickness, carrier concentration, and back-contact materials. For instance, increasing the thickness of the active layer PSC up to 1500 nm revealed enhanced PV performance parameters; however, further increases in thickness have resulted in performance saturation due to an increased rate of hole–electron recombination. Moreover, a comprehensive correlation study has been conducted to determine the optimum thickness and donor doping level for the C60-ETL layer in the range of 10–200 nm and 10¹²–10¹⁹ cm⁻³, respectively. Optimum device performance was observed at an ETL-C60 ultra-thin thickness of 10 nm and a carrier concentration of 10¹⁹ cm⁻³. To maintain improved PCEs, bulk and interface defects must be less than 10¹⁶ cm⁻³ and 10¹⁵ cm⁻³, respectively. Additional device performance improvement was achieved with a back-contact work function of 5 eV. The optimized HTL-free FASnI₃ structure demonstrated exceptional photovoltaic performance with a PCE of 19.63%, V_oc of 0.87 V, J_sc of 27.86 mA/cm², and FF of 81%. These findings highlight the potential for highly efficient photovoltaic (PV) technology solutions based on lead-free perovskite solar cell (PSC) structures that contribute to environmental remediation and cost-effectiveness. Full article

In the field of perovskite optoelectronics, developing hole-transporting materials (HTMs) on the spiro[fluorene-9,9′-xanthene] (SFX) platform is one of the current research focuses. The SFX inherits the merits of spirobifluorene in terms of the configuration and property, but it is more easily derivatized and regulated by virtue of its binary structure. In this work, we design and synthesize four isomeric SFX-based HTMs, namely m-SFX-mF, p-SFX-mF, m-SFX-oF, and p-SFX-oF, through varying the positions of fluorination on the peripheral aniline units and their substitutions on the SFX core, and the optoelectronic performance of the resulting HTMs is evaluated in both perovskite solar cells (PSCs) and light-emitting diodes (PeLEDs) by the vacuum thermal evaporating hole-transporting layers (HTLs). The HTM p-SFX-oF exhibits an improved power conversion efficiency of 15.21% in an inverted PSC using CH₃NH₃PbI₃ as an absorber, benefiting from the deep HOMO level and good HTL/perovskite interface contact. Meanwhile, the HTM m-SFX-mF provides a maximum external quantum efficiency of 3.15% in CsPb(Br/Cl)₃-based PeLEDs, which is attributed to its perched HOMO level and shrunken band-gap for facilitating charge carrier injection and then exciton combination. Through elucidating the synergistic position effect of fluorination on aniline units and their substitutions on the SFX core, this work lays the foundation for developing low-cost and efficient HTMs in the future. Full article