Search Results (21,365)

Echinococcosis represents a major public health issue and continues to be endemic in various regions around the world. Hydatid cysts are commonly located in the liver (primary site), followed by the lungs (secondary site). However, they are also found in less typical organs such as the spleen, kidneys, peritoneum, retroperitoneum, pancreas, gallbladder, and various other organs, as well as in striate muscles. Hydatid cysts involving the psoas muscle are rare, and in the past five years, only a few articles have addressed this condition due to its low incidence. Symptoms can be quite vague, and serological testing might return negative, making imaging studies crucial for an accurate diagnosis. Treatment options involve surgery alongside antiparasitic agents. Despite having a low mortality rate, the recurrence of hydatid disease remains high. This paper aims to provide new clinical data through our case presentation, while also offering a review of the cases of hydatid cysts involving the psoas muscle that have been published over the past five years. Full article

(1) Background: The main aim of this study was to investigate the effects of different cements (Panavia V5, RelyX U200) and placement techniques (indirect ultrasonic vibration and manual method) on the bond strength of glass fiber posts in teeth with different post space preparation methods and to evaluate the failure types. (2) Methods: A total of 120 human upper central teeth were collected for the study. One week after root canal treatment, 10 mm long post space preparation was performed using post drills. Post spaces were irrigated in three different ways, namely NaOCl, NaOCl + EDTA solutions, and passive ultrasonic irrigation of NaOCl and EDTA solutions. Glass fiber posts were divided into two groups for resin cement systems, namely RelyX U200 (3M ESPE) or Panavia V5 (Kuraray Medical). Two different methods, namely the indirect ultrasonic vibration and the manual method, were applied for post placement. Then, 1.2 mm sections were taken from the middle and coronal regions of the inserted fiber posts for a push-out test. (3) Results: the Irrigation × Cement (p = 0.002), Cement × Section (p = 0.043) and Placement × Section (p = 0.049) pairwise interactions were statistically significant. (4) Conclusions: in our study, the effects of different post cavity preparations, different cement types, and different placement techniques on the bond strength of the fiber post were observed. Full article

Background: Previous studies reported screen time in association with unhealthy dietary behaviors, such as excessive intake of sugar-sweetened beverages leading to dental caries. Thus, we aimed to explore the association between screen time on mobile devices and dental caries experience in adolescents, as well as whether sugar-sweetened beverages would mediate the association. Methods: We analyzed 24,374 junior and senior high school students of age 12 to 17 years from the 2021 “Surveillance for common diseases and health risk factors among students” Project in Jiangsu Province of China. Dental caries experience was determined by the designated dentists. Screen time and consumption of sugar-sweetened beverages were self-reported and treated as a priori risk. We employed an instrumental variable (IV) approach for the current cross-sectional setting. We used the lasso technique to shortlist covariates from a range of confounding factors. Binary logistic regression or ordered logistic regression was performed where appropriate to explore the associations of screen time on mobile devices with dental caries and sugar-sweetened beverages. Results: The prevalence rate of dental caries was 38.4% in the study population. In comparison with <2 h/d screen time on mobile devices, extended screen time (≥2 h/d) was associated with higher dental caries risk (coefficient: 1.27, 95%; confidence interval: 0.80–1.75). Mediation analysis suggested that sugar-sweetened beverage intake might be an independent risk factor for dental caries, instead of the mediator between screen time on mobile devices and dental caries. None of the interaction terms under investigation was statistically significant. Conclusions: Exposure to mobile device screens and sugar-sweetened beverages was associated with dental caries in adolescents. These findings highlighted the importance of increasing awareness of potential risks owing to mobile device usage and sugar-sweetened beverages and the necessity to develop appropriate intervention strategies for school-aged adolescents. Full article

Biomimetics is the science of imitating nature’s designs and processes to create innovative solutions for various fields, including dentistry and craniofacial reconstruction. In these areas, biomimetics involves drawing inspiration from living organisms/systems to develop new materials, techniques, and devices that closely resemble natural tissue structures and enhance functionality. This field has successfully demonstrated its potential to revolutionize craniofacial procedures, significantly improving patient outcomes. In dentistry, biomimetics offers exciting possibilities for the advancement of new dental materials, restorative techniques, and regenerative potential. By analyzing the structure/composition of natural teeth and the surrounding tissues, researchers have developed restorative materials that mimic the properties of teeth, as well as regenerative techniques that might assist in repairing enamel, dentin, pulp, cementum, periodontal ligament, and bone. In craniofacial reconstruction, biomimetics plays a vital role in developing innovative solutions for facial trauma, congenital defects, and various conditions affecting the maxillofacial region. By studying the intricate composition and mechanical properties of the skull and facial bones, clinicians and engineers have been able to replicate natural structures leveraging computer-aided design and manufacturing (CAD/CAM) and 3D printing. This has allowed for the creation of patient-specific scaffolds, implants, and prostheses that accurately fit a patient’s anatomy. This review highlights the current evidence on the application of biomimetics in the fields of dentistry and craniofacial reconstruction. Full article

Background: Treating tooth root canal systems with Er:YAG laser together with irrigants has been shown to be effective in reducing biofilms formed by Enterococcus faecalis. This study investigated whether laser-activated irrigation (LAI) with side-firing Endo tip (LiteTouch™; Light Instruments, Yokneam, Israel) affects dentin mineral composition when used with common endodontic irrigants. Methods: Root canals of extracted human teeth were treated with Er:YAG laser using a side-firing Endo tip combined with 17% ethylenediaminetetraacetic acid (EDTA) and/or 2.5% NaOCl in continuous or intermittent mode for 60 s. Dentin mineral composition (Ca, P, O) in coronal, middle, and apical regions of root canals was examined by energy dispersive X-ray spectroscopy. Results: The use of LAI with continuous EDTA resulted in the largest reduction in Ca and P levels. A final NaOCl rinse mitigated the EDTA-mediated mineral loss in all root canal regions and increased the O content. Likewise, the reduced Ca/O and Ca/P ratios caused by continuous EDTA irrigation were reversed when combined with a final NaOCl rinse. Conclusions: LAI with Er:YAG Endo tip using continuous EDTA irrigation followed by NaOCl caused minimal dentin mineral loss and can therefore be considered to be a safe treatment module for cleaning root canals. Full article

Silicon dioxide (SiO₂), commonly known as silica, is a naturally occurring mineral extracted from the Earth’s crust. It is widely used in commercial products such as food, medicine, and dental ceramics. There are few studies on the health effects of pyrogenic and colloidal silica after ingestion. No research has compared the impact of microscale morphologies on mitochondrial activity in colon cells after acute exposure. The results show that crystalline and amorphous silica had a concentration-independent effect on cells, with an initial increase in mitochondrial activity followed by a decrease. Vitreous silica did not affect cells. Diatomaceous earth and pyrogenic silica had a concentration-dependent response, causing a reduction in mitochondrial activity as concentration increased. Diatomaceous earth triggered the highest cellular response, with mitochondrial activity ranging from 78.84% ± 12.34 at the highest concentration (1000 ppm) to 62.54% ± 17.43 at the lowest concentration (0.01 ppm) and an average H₂O₂ concentration of 1.48 ± 0.15 RLUs. This research advances our understanding of silica’s impact on human gastrointestinal cells, highlighting the need for ongoing exploration. These findings can improve risk mitigation strategies in silica-exposed environments. Full article

Background/Objectives: This study compared the accuracy and efficiency of different surgical-guide (SG)-assisted and freehand drilling techniques for removing fiber posts from maxillary anterior teeth performed by differently experienced operators. Methods: A fiber post was bonded to the root canal of 54 extracted maxillary anterior teeth. After mounting the teeth in the jaw models, SGs were designed by integrating cone-beam computed tomography (CBCT) and intraoral scanner data. Each SG included a custom sleeve. An experienced or inexperienced operator drilled the post using three different techniques: (i) SG-assisted incremental drilling at 2–3 mm (SG1), (ii) SG-assisted one-time drilling to a predetermined depth (SG2), and (iii) freehand incremental drilling without SG (FH; n = 9 in each group). Deviations in coronal, sagittal, and horizontal planes and the angle of deviation were measured. Results: The SG1 and SG2 groups showed significantly smaller sagittal and horizontal deviations than the FH group, regardless of the operator’s experience. The SG2 group had a significantly shorter working time than the SG1 and FH groups. In the FH group, the experienced operator required a significantly shorter working time than the inexperienced operator. Conclusions: SG-assisted drilling techniques enhanced the accuracy and efficiency of removing fiber posts from the anterior teeth, irrespective of the operator’s experience. Full article

Candida albicans (C. albicans) adhering to denture-based resins (DBRs) is a known cause of denture stomatitis. A new approach to prevent denture stomatitis is to include antimicrobial substances within DBRs. Here, we examined the mechanical performance and antifungal properties of DBRs containing benzyldimethyldodecyl ammonium chloride (C₁₂BDMA-Cl) as an antimicrobial compound. C₁₂BDMA-Cl is a quaternary ammonium compound, and its antifungal properties have never been investigated when combined with dental acrylic resin. Therefore, we modified a commercially available heat-polymerized acrylic DBR to contain 3 and 5 wt.% of C₁₂BDMA-Cl. Unmodified DBR was used as a control group. Specimens were prepared using the conventional heat processing method. The specimen’s flexural strength, elastic modulus, microhardness, and surface roughness were evaluated. C. albicans biofilm was grown on the specimens and assessed via colony-forming units (CFUs) and scanning electron microscopy (SEM). In silico molecular docking was applied to predict the potential C₁₂BDMA-Cl inhibition activity as an antifungal drug. The 3% C₁₂BDMA-Cl DBR demonstrated antifungal activities without a deterioration effect on the mechanical performance. SEM images indicated fewer colonies in DBR containing C₁₂BDMA-Cl, which can be a potential approach to managing denture stomatitis. In conclusion, C₁₂BDMA-Cl is a promising antifungal agent for preventing and treating denture stomatitis. Full article

Background/Objectives: Odontogenic sinusitis (ODS) is the most common cause of unilateral maxillary sinus opacification. Initial treatment consists of intranasal steroids and antimicrobial therapy. In case of persistence of the disease, endoscopic sinus surgery (ESS) is advised. It is still not clear what extension of ESS is required and whether frontal sinusotomy or ethmoidectomy is justified in ODS with frontal sinus involvement. Methods: Adult patients presented with uncomplicated recalcitrant bacterial ODS due to endodontic-related dental pathology were evaluated by an otolaryngologist and a dentist and scheduled for ESS. Sinus CT scan demonstrated opacification of maxillary sinus and partial or complete opacification of extramaxillary sinuses ipsilateral to the side of ODS. Patients were undergoing either maxillary antrostomy, antroethmoidectomy, or antroethmofrontostomy. Preoperative and postoperative evaluations were done with nasal endoscopy, dental examination, subjective and radiological symptoms. Results: The study group consisted of 30 patients. Statistically significant decreases in values after surgery were found for SNOT-22, OHIP-14, Lund–Mackay, Lund–Kennedy, and Zinreich scale. Tooth pain was present in 40% cases during the first visit and in 10% during the follow-up visit. Foul smell was initially reported by 73.3% and by one patient during follow-up visit (3.3%). Significantly longer total recovery time and more crusting was marked for antroethmofrontostomy when compared to maxillary antrostomy. Conclusions: ESS resolved ODS with ethmoid and frontal involvement in almost every case. Minimal surgery led to improved overall clinical success in the same way as antroethmofrontostomy without risking the frontal recess scarring and stenosis. Full article

This study investigates the differences in mechanical properties between acrylonitrile butadiene styrene (ABS) samples produced using fused deposition modeling (FDM) and stereolithography (SLA) using ABS filaments and ABS-like resin, respectively. The central question is to determine how these distinct printing techniques affect the properties of ABS and ABS-like resin and which method delivers superior performance for specific applications, particularly in dental treatments. The evaluation methods used in this study included Shore D hardness, accelerated aging, tensile testing, Izod impact testing, flexural resistance measured by a 3-point bending test, and compression testing. Poisson’s ratio was also assessed, along with microstructure characterization, density measurement, confocal microscopy, dilatometry, wettability, Fourier-transform infrared spectroscopy (FTIR), and nanoindentation. It was concluded that ABS has the same hardness in both manufacturing methods; however, the FDM process results in significantly superior mechanical properties compared to SLA. Microscopy demonstrates a more accurate sample geometry when fabricated with SLA. It is also concluded that printable ABS is suitable for applications in dentistry to fabricate models and surgical guides using the SLA and FDM methods, as well as facial protectors for sports using the FDM method. Full article

Background: Obesity is a risk factor of several types of cancer, including breast cancer. In this study, we aimed to histologically characterize the adipose tissue of the tumor microenvironment (TME) of triple-negative breast cancer (TNBC) in overweight/obese versus normal-weight patients. Methods: TNBC tissue sections from normal-weight (BMI_<25) and overweight/obese patients (BMI_≥25) were stained with antibodies against CD68, CD163, CD31, CD34, and vimentin. At the invasive tumor front, positive cells were counted in tumor adjacent adipose tissue (AT) and within cancer tissue (CT). Further, the size of the tumor-adjacent and distant mammary adipocytes was determined in perilipin stained sections. Expression of ANGPTL4, CD36 and FABP4, proteins involved in fatty acid metabolism, was analyzed in marginal tumor cells using an immune reactive score. Results: Overweight/obese TNBC patients had significantly larger adipocytes, higher numbers of CD163+ macrophages (BMI_<25: 2.80 vs. BMI_≥25: 10.45; p = 0.011) and lower numbers of CD31+ (BMI_<25: 4.20 vs. BMI_≥25: 2.40; p = 0.018) and CD34+ (BMI_<25: 14.60 vs. BMI_≥25: 5.20; p = 0.045) cells as markers of angiogenesis in the AT as well as a higher frequency of cancer-associated-fibroblast-like cells in the AT and CT (BMI_<25: 7.60 vs. BMI_≥25: 25.39 in total; p = 0.001). Moreover, expression of CD36 (BMI_<25: 2.15 vs. BMI_≥25: 2.60; p = 0.041) and ANGPTL4 (BMI_<25: 6.00 vs. BMI_≥25: 9.80; p = 0.026) was elevated in the TNBC cells of overweight/obese patients. Conclusions: Our data suggest BMI-related changes in the TME of overweight/obese TNBC patients, including hypertrophied adipocytes, reduced vascularization, more M2-like macrophages and CAF-like cells, and an increase in the expression of fatty acid metabolizing proteins in marginal tumor cells, all contributing to a more tumor-promoting, immunosuppressive environment. Full article

(1) Background: The present study aimed to assess the antifungal effectiveness of a topical innovative formulation containing the association of an antifungal agent, voriconazole (VCZ), and the essential oil of Pinus sylvestris L. (PSEO). (2) Methods: Pseudo-ternary phase diagram and D-optimal mixture design approaches were applied for the development and the optimization of the o/w nanoemulsion. The optimized formulation (NE) was subjected to physicochemical characterization and to physical stability studies. In vitro permeation studies were carried out using the Franz cell diffusion system. The antimycotic efficacy against Microsporum canis was carried out in vitro. (3) Results: Optimal nanoemulsion showed great physical stability and was characterized by a small droplet size (19.015 nm ± 0.110 nm), a PDI of 0.146 ± 0.011, a zeta potential of −16.067 mV ± 1.833 mV, a percentage of transmittance of 95.352% ± 0.175%, and a pH of 5.64 ± 0.03. Furthermore, it exhibited a significant enhancement in apparent permeability coefficient (p < 0.05) compared to the VCZ free drug. Finally, NE presented the greatest antifungal activity against Microsporum canis in comparison with VCZ and PSEO tested alone. (4) Conclusions: These promising results suggest that this topical innovative formulation could be a good candidate to treat onychomycosis. Further ex vivo and clinical investigations are needed to support these findings. Full article

Introduction: Over the years, welding fumes’ harmful effects have been demonstrated countless times in the scientific literature. Recently, studies in the field have shown an increasing interest in the negative consequences that these fumes may have on the tissues of the oral cavity. Materials & method: The current study aimed to investigate the impact that welding fumes have on the structure of human dental enamel by analyzing the microhardness of the dental enamel in 15 extracted human teeth, after various exposure times, using the Vickers method. Results: The results obtained after 48, 96, 168, and 336 h of direct exposure of the extracted specimens to the welding fumes show a statistically significant increase in the depreciation of the dental enamel’s microhardness, related to the duration of exposure (p < 0.05). An average of 305 Vickers units was observed at the longest exposure time, 336 h, in the present study, whereas in the control group, the microhardness analysis showed an average of 327 Vickers units. Full article

Background/Objectives: Cancer organoids have emerged as a valuable tool of three-dimensional (3D) cell cultures to investigate tumor heterogeneity and predict tumor behavior and treatment response. We developed a 3D organotypic culture model of oral squamous cell carcinoma (OSCC) to recapitulate the tumor–stromal interface by co-culturing four cell types, including patient-derived cancer-associated fibroblasts (PD-CAFs). Methods: A stainless-steel ring was used twice to create the horizontal positioning of the cancer stroma (adjoining normal oral mucosa connective tissue) and the OSCC layer (surrounding normal oral mucosa epithelial layer). Combined with a structured bi-layered model of the epithelial component and the underlying stroma, this protocol enabled us to construct four distinct portions mimicking the oral cancer tissue arising in the oral mucosa. Results: In this model, α-smooth muscle actin-positive PD-CAFs were localized in close proximity to the OSCC layer, suggesting a crosstalk between them. Furthermore, a linear laminin-γ2 expression was lacking at the interface between the OSCC layer and the underlying stromal layer, indicating the loss of the basement membrane-like structure. Conclusions: Since the specific 3D architecture and polarity mimicking oral cancer in vivo provides a more accurate milieu of the tumor microenvironment (TME), it could be crucial in elucidating oral cancer TME. Full article