Search Results (32)

Microbial fuel cells (MFCs) represent a promising technology for sustainable energy generation, which leverages the metabolic activities of microorganisms to convert organic substrates into electrical energy. In oil spill scenarios, hydrocarbonoclastic biofilms naturally form at the water–oil interface, creating a distinct environment for microbial activity. In this work, we engineered a novel MFC that harnesses these biofilms by strategically positioning the positive electrode at this critical junction, integrating the biofilm’s natural properties into the MFC design. These biofilms, composed of specialized hydrocarbon-degrading bacteria, are vital in supporting electron transfer, significantly enhancing the system’s power generation. Next-generation sequencing and scanning electron microscopy were used to characterize the microbial community, revealing a significant enrichment of hydrocarbonoclastic Gammaproteobacteria within the biofilm. Notably, key genera such as Paenalcaligenes, Providencia, and Pseudomonas were identified as dominant members, each contributing to the degradation of complex hydrocarbons and supporting the electrogenic activity of the MFCs. An electrochemical analysis demonstrated that the MFC achieved a stable power output of 51.5 μW under static conditions, with an internal resistance of about 1.05 kΩ. The system showed remarkable long-term stability, which maintained consistent performance over a 5-day testing period, with an average daily energy storage of approximately 216 mJ. Additionally, the MFC effectively recovered after deep discharge cycles, sustaining power output for up to 7.5 h before requiring a recovery period. Overall, the study indicates that MFCs based on hydrocarbonoclastic biofilms provide a dual-functionality system, combining renewable energy generation with environmental remediation, particularly in wastewater treatment. Despite lower power output compared to other hydrocarbon-degrading MFCs, the results highlight the potential of this technology for autonomous sensor networks and other low-power applications, which required sustainable energy sources. Moreover, the hydrocarbonoclastic biofilm-based MFC presented here offer significant potential as a biosensor for real-time monitoring of hydrocarbons and other contaminants in water. The biofilm’s electrogenic properties enable the detection of organic compound degradation, positioning this system as ideal for environmental biosensing applications. Full article

Bioelectrochemical processes are emerging as one of the most efficient and sustainable technologies for wastewater treatment. Their application for industrial wastewater treatment is still low due to the high toxicity and difficulty of biological treatment for industrial effluents. This is especially relevant in pharmaceutical industries, where different solvents, active pharma ingredients (APIs), extreme pH, and salinity usually form a lethal cocktail for the bacterial community in bioreactors. This work evaluates the impact of the anode architecture on the detoxification performance and analyzes, for the first time, the profile of some key bioremediation enzymes (catalase and esterase) and reactive oxygen species (ROS) during the operation of microbial electrochemical cells treating real pharmaceutical wastewater. Our results show the existence of oxidative stress and loss of cell viability in planktonic cells, while the electrogenic bacteria that form the biofilm maintain their biochemical machinery intact, as observed in the bioelectrochemical response. Monitorization of electrical current flowing in the bioelectrochemical system showed how electroactive biofilm, after a short adaptation period, started to degrade the pharma effluent. The electroactive biofilms are responsible for the detoxification of this type of industrial wastewater. Full article

High power output and high conversion efficiency are crucial parameters for microbial fuel cells (MFCs). In our previous work, we worked with microfluidic MFCs to study fundamentals related to the power density of the MFCs, but nutrient consumption was limited to one side of the microchannel (the electrode layer) due to diffusion limitations. In this work, long-term experiments were conducted on a new four-electrode microfluidic MFC design, which grew Geobacter sulfurreducens biofilms on upward- and downward-facing electrodes in the microchannel. To our knowledge, this is the first study comparing electroactive biofilm (EAB) growth experiencing the influence of opposing gravitational fields. It was discovered that inoculation and growth of the EAB did not proceed as fast at the downward-facing anode, which we hypothesize to be due to gravity effects that negatively impacted bacterial settling on that surface. Rotating the device during the growth phase resulted in uniform and strong outputs from both sides, yielding individual power densities of 4.03 and 4.13 W m⁻², which increased to nearly double when the top- and bottom-side electrodes were operated in parallel as a single four-electrode MFC. Similarly, acetate consumption could be doubled with the four electrodes operated in parallel. Full article

Microbial fuel cells (MFCs) represent a promising avenue for sustainable energy production by harnessing the metabolic activity of microorganisms. In this study, a novel design of MFC—a Microfluidic Benthic Microbial Fuel Cell (MBMFC)—was developed, fabricated, and tested to evaluate its electrical energy generation. The design focused on balancing microfluidic architecture and wiring procedures with microbial community dynamics to maximize power output and allow for upscaling and thus practical implementation. The testing phase involved experimentation to evaluate the performance of the MBMFC. Microbial feedstock was varied to assess its impact on power generation. The designed MBMFC represents a promising advancement in the field of bioenergy generation. By integrating innovative design principles with advanced fabrication techniques, this study demonstrates a systematic approach to optimizing MFC performance for sustainable and clean energy production. Full article

Electrogenic bacteria present in bioelectrical devices such as soil microbial fuel cells (SMFCs) are powered by the oxidation of organic and inorganic compounds due to microbial activity. Fourteen soils randomly selected from Bergen Community College or areas nearby, located in the state of New Jersey, USA, were used to screen for the presence of electrogenic bacteria. SMFCs were incubated at 35–37 °C. Of the 14 samples, 11 generated electricity and enriched electrogenic bacteria. The average optimal electricity production by the top 3 SMFCs was 152 microwatts. The highest electrical production was produced by SMFC-B1C and SMFC-B1B, with 162 and 152 microwatts, respectively. Microbial DNA was extracted from the biofilm grown on the anodes, followed by PCR analysis of the 16S rRNA V3–V4 region. Next-generation sequencing was performed to determine the structure and diversity of the electrogenic microbial community. The top 3 MFCs with the highest electricity production showed a bacterial community predominantly composed of bacteria belonging to the Bacillota and Pseudomonadota phyla with a significant presence of Euryarcheota members of methanogenic archaea. SMFC-B1C showed a more diverse electrogenic community, followed by SMFC-B1B and SMFC-B1. When analyzing the top 10 bacteria in the SMFCs, 67 percent belonged to the class Clostridia, indicating that anaerobic conditions were required to enrich electrogenic bacterial numbers and optimize electrical production. The ongoing optimization of SMFCs will provide better production of electricity and continuous enhancement of microbial activity to sustain longer operational times and higher levels of electrogenesis. The characterization of electrogenic microbial communities will provide valuable information to understand the contribution of different populations to the production of electricity in bioelectrical devices. Full article

Anode materials play a crucial role in the performance of microbial fuel cells (MFCs) in terms of power output. In this study, carbon nanotube (CNT)/polyaniline (PANI)/chitosan (CS) composites were prepared on a porous sponge matrix. The high electrical conductivity of CNTs, the capacitive behavior of PANI, and the biocompatibility of CS were leveraged to enhance the electricity generation and energy storage capabilities of MFCs. Experimental results demonstrated that the MFC with the modified anode achieved a maximum power density of 7902.4 mW/m³. Moreover, in the charging–discharging test, the stored electricity of the S/CNT/PANI/CS anode was 16.38 times that of the S/CNT anode when both the charging and discharging times were 30 min. High-throughput sequencing revealed that the modified composite anode exhibited remarkable biocompatibility and selective enrichment of electrogenic bacteria. Overall, this study presents a novel approach for developing composite MFC anode materials with energy storage functionality. Full article

The terminal oxidases of bacterial aerobic respiratory chains are redox-active electrogenic enzymes that catalyze the four-electron reduction of O₂ to 2H₂O taking out electrons from quinol or cytochrome c. Living bacteria often deal with carbon monoxide (CO) which can act as both a signaling molecule and a poison. Bacterial terminal oxidases contain hemes; therefore, they are potential targets for CO. However, our knowledge of this issue is limited and contradictory. Here, we investigated the effect of CO on the cell growth and aerobic respiration of three different Escherichia coli mutants, each expressing only one terminal quinol oxidase: cytochrome bd-I, cytochrome bd-II, or cytochrome bo₃. We found that following the addition of CO to bd-I-only cells, a minimal effect on growth was observed, whereas the growth of both bd-II-only and bo₃-only strains was severely impaired. Consistently, the degree of resistance of aerobic respiration of bd-I-only cells to CO is high, as opposed to high CO sensitivity displayed by bd-II-only and bo₃-only cells consuming O₂. Such a difference between the oxidases in sensitivity to CO was also observed with isolated membranes of the mutants. Accordingly, O₂ consumption of wild-type cells showed relatively low CO sensitivity under conditions favoring the expression of a bd-type oxidase. Full article

Soil microbial fuel cells (SMFCs) are bioelectrical devices powered by the oxidation of organic and inorganic compounds due to microbial activity. Seven soils were randomly selected from Bergen Community College or areas nearby, located in the state of New Jersey, USA, were used to screen for the presence of electrogenic bacteria. SMFCs were incubated at 35–37 °C. Electricity generation and electrogenic bacteria were determined using an application developed for cellular phones. Of the seven samples, five generated electricity and enriched electrogenic bacteria. Average electrical output for the seven SMFCs was 155 microwatts with the start-up time ranging from 1 to 11 days. The highest output and electrogenic bacterial numbers were found with SMFC-B1 with 143 microwatts and 2.99 × 10⁹ electrogenic bacteria after 15 days. Optimal electrical output and electrogenic bacterial numbers ranged from 1 to 21 days. Microbial DNA was extracted from the top and bottom of the anode of SMFC-B1 using the ZR Soil Microbe DNA MiniPrep Protocol followed by PCR amplification of 16S rRNA V3-V4 region. Next-generation sequencing of 16S rRNA genes generated an average of 58 k sequences. BLAST analysis of the anode bacterial community in SMFC-B1 demonstrated that the predominant bacterial phylum was Bacillota of the class Clostridia (50%). However, bacteria belonging to the phylum Pseudomonadota (15%) such as Magnetospirillum sp. and Methylocaldum gracile were also part of the predominant electrogenic bacterial community in the anode. Unidentified uncultured bacteria accounted for 35% of the predominant bacterial community. Bioelectrical devices such as MFCs provide sustainable and clean alternatives to future applications for electricity generation, waste treatment, and biosensors. Full article

The ability of some bacteria to perform Extracellular Electron Transfer (EET) has been explored in bioelectrochemical systems (BES) to obtain energy or chemicals from pure substances or residual substrates. Here, a new pyoverdine-producing Pseudomonas aeruginosa strain was isolated from an MFC biofilm oxidizing glycerol, a by-product of biodiesel production. Strain EL14 was investigated to assess its electrogenic ability and products. In an open circuit system (fermentation system), EL14 was able to consume glycerol and produce 1,3-propanediol, an unusual product from glycerol oxidation in P. aeruginosa. The microbial fuel cell (MFC) EL14 reached a current density of 82.4 mA m⁻² during the first feeding cycle, then dropped sharply as the biofilm fell off. Cyclic voltammetry suggests that electron transfer to the anode occurs indirectly, i.e., through a redox substance, with redox peak at 0.22 V (vs Ag/AgCl), and directly probably by membrane redox proteins, with redox peak at 0.05 V (vs Ag/AgCl). EL14 produced added-value bioproducts, acetic and butyric acids, as well as 1,3 propanediol, in both fermentative and anodic conditions. However, the yield of 1,3-PDO from glycerol was enhanced from 0.57 to 0.89 (mol of 1,3-PDO mol⁻¹ of glycerol) under MFC conditions compared to fermentation. This result was unexpected, since successful 1,3-PDO production is not usually associated with P. aeruginosa glycerol metabolism. By comparing EL14 genomic sequences related to the 1,3-PDO biosynthesis with P. aeruginosa reference strains, we observed that strain EL14 has three copies of the dhaT gene (1,3-propanediol dehydrogenase a different arrangement compared to other Pseudomonas isolates). Thus, this work functionally characterizes a bacterium never before associated with 1,3-PDO biosynthesis, indicating its potential for converting a by-product of the biodiesel industry into an emerging chemical product. Full article

Power generation and wastewater treatment are two great challenges for sustainable development. Microbial fuel cells (MFCs) are a sustainable alternative that can generate bioelectricity in the bioremediation process of wastewater. For this reason, the objective of this research was to generate bioelectricity through double-chamber microbial-combustion cell systems from wastewater from the Covicorti Wastewater Treatment Plant (PTARC) in the anodic chamber and electrogenic bacteria such as Stenotrophomonas maltophilia, Acinetobacter bereziniae, and Achromobacteria xylosoxidans in the cathode chamber, respectively. Measurements of the voltage, current, power density, current density, and optical density of the bacteria and biochemical oxygen demand (BOD) were made. In addition, a metagenomic analysis of the wastewater sample was performed. It was shown that the MFC with A. xylosoxidans generated the highest voltage peak (1.01 ± 0.06 V) on day 24, while the MFC with S. maltophilia generated the highest current value (0.71 ± 0.02 mA). The pH levels were slightly alkaline, and the maximum anodic conductivity value was presented by the MFC with A. cerevisiae, with a peak value of 81 ± 2 mS/cm on day 24. On the other hand, a maximum power density and current density of 195,493 ± 4717 mW/m² and 4987 A/cm², respectively, were obtained in the MFC with A. xylosoxidans. Finally, the metagenomic analysis identified the predominant phyla of Proteobacteria present in wastewater samples capable of generating electrical energy as Bacillota, Pseudomonadota, Bacteroidota, Actinomyketone, and Campylobacterota. Full article

Electroactive bacteria (EAB) are natural microorganisms (mainly Bacteria and Archaea) living in various habitats (e.g., water, soil, sediment), including extreme ones, which can interact electrically each other and/or with their extracellular environments. There has been an increased interest in recent years in EAB because they can generate an electrical current in microbial fuel cells (MFCs). MFCs rely on microorganisms able to oxidize organic matter and transfer electrons to an anode. The latter electrons flow, through an external circuit, to a cathode where they react with protons and oxygen. Any source of biodegradable organic matter can be used by EAB for power generation. The plasticity of electroactive bacteria in exploiting different carbon sources makes MFCs a green technology for renewable bioelectricity generation from wastewater rich in organic carbon. This paper reports the most recent applications of this promising technology for water, wastewater, soil, and sediment recovery. The performance of MFCs in terms of electrical measurements (e.g., electric power), the extracellular electron transfer mechanisms by EAB, and MFC studies aimed at heavy metal and organic contaminant bioremediationF are all described and discussed. Full article

To develop efficient microbial fuel cell systems for green energy production using different waste products, establishing characterised bacterial consortia is necessary. In this study, bacteria with electrogenic potentials were isolated from mud samples and examined to determine biofilm-formation capacities and macromolecule degradation. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry identifications have revealed that isolates represented 18 known and 4 unknown genuses. They all had the capacities to reduce the Reactive Black 5 stain in the agar medium, and 48 of them were positive in the wolfram nanorod reduction assay. The isolates formed biofilm to different extents on the surfaces of both adhesive and non-adhesive 96-well polystyrene plates and glass. Scanning electron microscopy images revealed the different adhesion potentials of isolates to the surface of carbon tissue fibres. Eight of them (15%) were able to form massive amounts of biofilm in three days at 23 °C. A total of 70% of the isolates produced proteases, while lipase and amylase production was lower, at 38% and 27% respectively. All of the macromolecule-degrading enzymes were produced by 11 isolates, and two isolates of them had the capacity to form a strong biofilm on the carbon tissue one of the most used anodic materials in MFC systems. This study discusses the potential of the isolates for future MFC development applications. Full article

The mechanism behind how flavin mononucleotide (FMN)-producing bacteria attach to a host intestine remains unclear. In order to address this issue, this study isolated the Gram-positive bacteria Lactobacillus plantarum from Mongolian fermented Airag, named L. plantarum MA. These bacteria were further employed as the model microbes, and their electrogenic properties were first identified by their significant expression of type II NADH-quinone oxidoreductase. This study also demonstrated that the electrical activity of L. plantarum MA can be conducted through flavin mononucleotide (FMN)-based extracellular electron transfer, which is highly dependent on the presence of a carbon source in the medium. Our data show that approximately 15 µM of FMN, one of the key electron donors for the generation of electricity, can be produced from L. plantarum MA, as they were cultured in the presence of lactulose for 24 h. We further demonstrated that the electrical activity of L. plantarum MA can promote microbial adhesion and can thus enhance the colonization effectiveness of Caco-2 cells and mouse cecum. Such enhanced adhesiveness was attributed to the increased expression of type I collagens in the intestinal epithelium after treatment with L. plantarum MA. This study reveals the mechanism behind the electrogenic activity of L. plantarum MA and shows how the bacteria utilize electricity to modulate the protein expression of gut tissue for an enhanced adhesion process. Full article

Graphene oxide (GO), a chemically oxidized sheet of graphite, has been used as a conductive carbon carrier of microbes to boost various bioelectrochemical reactions. However, the types of microbes that can reduce GO have rarely been investigated. In this study, a strain of GO-reducing bacteria, named NIT-SL11, which was obtained from a hydrogel of microbially reduced GO and anaerobic sludge that converts sewage to electricity, was phylogenically identified as a novel strain of Geotalea uraniireducens. Considering the current lack of information on the electrogenic ability of the bacterium and its physicochemical and chemotaxonomic characteristics, the polyphasic characterization of the Geotalea uraniireducens strain NIT-SL11 was performed. NIT-SL11 utilized various organic acids, such as lactate, benzoate, and formate, as electron donors and exhibited respiration using GO, electrodes, fumarate, and malate. The strain contained C16:1ω7c and C16:0 as the major fatty acids and MK-8 and 9 as the major respiratory quinones. The complete genome of NIT-SL11 was 4.7 Mbp in size with a G+C content of 60.9%, and it encoded 80 putative c-type cytochromes and 23 type IV pili-related proteins. The possible extracellular electron transfer (EET) pathways of the strain were the porin–cytochrome (Pcc) EET pathway and type IV pili-based pathway. Full article

Saline wastewater pollution is a critical issue that needs to be addressed. The present study focused on the development of a dual-chambered microbial fuel cell (MFC) treating saline wastewater at the anode. Halophilic exo-electrogenic bacteria enriched from seawater (Arabian Sea, Mumbai, India) were used in the anodic chamber of the MFC. Denitrification using denitrifying bacteria was employed in the cathodic chamber. The maximum power density was significantly increased from 96.77 mW/m² to 162.09 mW/m² with a rise in NaCl concentration from 20 to 40 g/L. Nitrate removal in the cathode chamber increased from 80 ± 3% to 89 ± 3.2% with increase in salt concentration from 20 g/L to 40 g/L and concomitantly COD removal in the anode chamber increased from 76 ± 3.8% to 83 ± 4%. Cyclic voltammetry (CV) analysis revealed higher electrochemical activity at 40 g/L salt concentration. Electrochemical impedance spectroscopy (EIS) analysis exhibited that charge transfer and solution resistances were lower when the salinity was increased. Microbial community analysis revealed the presence of Clostridium, Shewanella, and Bacillus as the most abundant genera in the anodic chamber. This study demonstrated the dual applicability of the system targeted for removal of organics from saline wastewater and nitrate removal from contaminated wastewater accompanied by power generation from the MFC. Full article