Search Results (25)

Signal propagation models play a fundamental role in radio frequency communication research. However, emerging communication methods, such as body-coupled communication (BCC), require the creation of new models. In this paper, we introduce mathematical models that approximate the human body as an electrical circuit, as well as linear regression- and random forest-based predictive models that infer the expected signal loss from its frequency, measurement point locations, and body parameters. The results demonstrate a close correspondence between the amplitude-frequency response (AFR) predicted by the electrical circuit models and the experimental data gathered from volunteers. The accuracy of our predictive models was assessed by using their root mean square errors (RMSE), ranging from 1.5 to 7 dB depending on the signal frequency within the 0.05 to 20 MHz range. These results allow researchers and engineers to simulate and forecast the expected signal loss within BCC systems during their design phase. Full article

With the development of technology, systems gravitate towards increasing in their complexity, miniaturization, and level of automation. Amongst these systems, ultrasonic devices have adhered to this trend of advancement. Ultrasonic systems require transducers to generate and sense ultrasonic signals. These transducers heavily impact the system’s performance. Advancements in microelectromechanical systems have led to the development of micromachined ultrasonic transducers (MUTs), which are utilized in miniaturized ultrasound systems. Piezoelectric micromachined ultrasonic transducers (PMUTs) exhibit higher capacitance and lower electrical impedance, which enhances the transducer’s sensitivity by minimizing the effect of parasitic capacitance and facilitating their integration with low-voltage electronics. PMUTs utilize high-yield batch microfabrication with the use of thin piezoelectric films. The deposition of thin piezoelectric material compatible with complementary metal-oxide semiconductors (CMOS) has opened novel avenues for the development of miniaturized compact systems with the same substrate for application and control electronics. PMUTs offer a wide variety of applications, including medical imaging, fingerprint sensing, range-finding, energy harvesting, and intrabody and underwater communication links. This paper reviews the current research and recent advancements on PMUTs and their applications. This paper investigates in detail the important transduction metrics and critical design parameters for high-performance PMUTs. Piezoelectric materials and microfabrication processes utilized to manufacture PMUTs are discussed. Promising PMUT applications and outlook on future advancements are presented. Full article

Intrabody communication (IBC) can achieve better power efficiency and higher levels of security than other traditional wireless communication technologies. Currently, the majority of research on the body channel characteristics of galvanic coupling IBC are motionless and have only been evaluated in the frequency domain. Given the long measuring times of traditional methods, the access to dynamic variations and the simultaneous evaluation of the time-frequency domain remains a challenge for dynamic body channels such as the cardiac channel. To address this challenge, we proposed a parallel measurement methodology with a multi-tone strategy and a time-parameter processing approach to obtain a time-frequency evaluation for dynamic body channels. A group search algorithm has been performed to optimize the crest factor of multitone excitation in the time domain. To validate the proposed methods, in vivo experiments, with both dynamic and motionless conditions were measured using the traditional method and the proposed method. The results indicate that the proposed method is more time efficient ($T_{meas}=1 \mathrm{ms}$) with a consistent performance (${\rho }_c$ > 98%). Most importantly, it is capable of capturing dynamic variations in the body channel and provides a more comprehensive evaluation and richer information for the study of IBC. Full article

This paper proposes and demonstrates the capabilities of a new sensorization system that monitors skin contact between two persons. Based on the intrabody communication standard (802.15.6), the new system allows for interbody communication, through the transmission of messages between different persons through the skin when they are touching. The system not only detects if there has been contact between two persons but, as a novelty, is also able to identify the elements that have been in contact. This sensor will be applied to analyze and monitor good follow-up of hand hygiene practice in health care, following the “World Health Organization Guidelines on Hand Hygiene in Health Care”. This guide proposes specific recommendations to improve hygiene practices and reduce the transmission of pathogenic microorganisms between patients and health-care workers (HCW). The transmission of nosocomial infections due to improper hand hygiene could be reduced with the aid of a monitoring system that would prevent HCWs from violating the protocol. The cutting-edge sensor proposed in this paper is a crucial innovation for the development of this automated hand hygiene monitoring system (AHHMS). Full article

The explosive increase in the number of IoT devices requires various types of communication methods. This paper presents secure personal authentication using electrostatic coupling Intra-body communication (IBC) based on frequency shift keying (FSK) and error correction. The proposed architecture uses GPIO for a transmitter and analog-to-digital conversion (ADC) for a receiver. We mplemented FSK modulation, demodulation, data protection, and error correction techniques in the MCU software without applying hardware devices. We used the characteristic that the carrier signal is 50% duty square wave for 1-bit error correction and applied a method of randomly inverting SHA1 hash data to protect user authentication data during transmission. The transmitter modulates binary data using a square wave as a carrier signal and transmits data through the human body. The receiver demodulates the signal using ADC and decrypts the demodulated binary data. To determine the carrier frequency from ADC results, we applied a zero-crossing algorithm which is used to detect edge characteristics in image processing. When calculating the threshold value within the zero-crossing algorithm, we implemented an adaptive threshold setting technique utilizing Otsu’s binarization technique. We found that the size of the electrode pad does not affect the signal strength, but the distance between the electrode pad and the skin has a significant effect on the signal strength. Our results show that binary data modulated with a square wave can be successfully transmitted through the human body, and, when 1-bit error correction is applied, the byte error rate on the receiver side is improved around 3.5% compared to not applying it. Full article

Advancement in the miniaturization of high-density power sources, electronic circuits, and communication technologies enabled the construction of miniaturized electronic devices, implanted directly in the heart. These include pacing devices to prevent low heart rates or terminate heart rhythm abnormalities (‘arrhythmias’), long-term rhythm monitoring devices for arrhythmia detection in unexplained syncope cases, and heart failure (HF) hemodynamic monitoring devices, enabling the real-time monitoring of cardiac pressures to detect and alert for early fluid overload. These devices were shown to prevent HF hospitalizations and improve HF patients’ life quality. Pacing devices include permanent pacemakers (PPM) that maintain normal heart rates, defibrillators that are capable of fast detection and the termination of life-threatening arrhythmias, and cardiac re-synchronization devices that improve cardiac function and the survival of HF patients. Traditionally, these devices are implanted via the venous system (‘endovascular’) using conductors (‘endovascular leads/electrodes’) that connect the subcutaneous device battery to the appropriate cardiac chamber. These leads are a potential source of multiple problems, including lead-failure and systemic infection resulting from the lifelong exposure of these leads to bacteria within the venous system. One of the important cardiac innovations in the last decade was the development of a leadless PPM functioning without venous leads, thus circumventing most endovascular PPM-related problems. Leadless PPM’s consist of a single device, including a miniaturized power source, electronic chips, and fixating mechanism, directly implanted into the cardiac muscle. Only rare device-related problems and almost no systemic infections occur with these devices. Current leadless PPM’s sense and pace only the ventricle. However, a novel leadless device that is capable of sensing both atrium and ventricle was recently FDA approved and miniaturized devices that are designed to synchronize right and left ventricles, using novel intra-body inner-device communication technologies, are under final experiments. This review will cover these novel implantable miniaturized cardiac devices and the basic algorithms and technologies that underlie their development. Advancement in the miniaturization of high-density power sources, electronic circuits, and communication technologies enabled the construction of miniaturized electronic devices, implanted directly in the heart. These include pacing devices to prevent low heart rates or terminate heart rhythm abnormalities (‘arrhythmias’), long-term rhythm monitoring devices for arrhythmia detection in unexplained syncope cases, and heart failure (HF) hemodynamic monitoring devices, enabling the real-time monitoring of cardiac pressures to detect and alert early fluid overload. These devices were shown to prevent HF hospitalizations and improve HF patients’ life quality. Pacing devices include permanent pacemakers (PPM) that maintain normal heart rates, defibrillators that are capable of fast detection and termination of life-threatening arrhythmias, and cardiac re-synchronization devices that improve cardiac function and survival of HF patients. Traditionally, these devices are implanted via the venous system (‘endovascular’) using conductors (‘endovascular leads/electrodes’) that connect the subcutaneous device battery to the appropriate cardiac chamber. These leads are a potential source of multiple problems, including lead-failure and systemic infection that result from the lifelong exposure of these leads to bacteria within the venous system. The development of a leadless PPM functioning without venous leads was one of the important cardiac innovations in the last decade, thus circumventing most endovascular PPM-related problems. Leadless PPM’s consist of a single device, including a miniaturized power source, electronic chips, and fixating mechanism, implanted directly into the cardiac muscle. Only rare device-related problems and almost no systemic infections occur with these devices. Current leadless PPM’s sense and pace only the ventricle. However, a novel leadless device that is capable of sensing both atrium and ventricle was recently FDA approved and miniaturized devices designed to synchronize right and left ventricles, using novel intra-body inner-device communication technologies, are under final experiments. This review will cover these novel implantable miniaturized cardiac devices and the basic algorithms and technologies that underlie their development. Full article

In recent years there has been an increasing need for miniature, low-cost, commercially accessible, and user-friendly sensor solutions for wireless body area networks (WBAN), which has led to the adoption of new physical communication interfaces providing distinctive advantages over traditional wireless technologies. Ultra-wideband (UWB) and intrabody communication (IBC) have been the subject of intensive research in recent years due to their promising characteristics as means for short-range, low-power, and low-data-rate wireless interfaces for interconnection of various sensors and devices placed on, inside, or in the close vicinity of the human body. The need for safe and standardized solutions has resulted in the development of two relevant standards, IEEE 802.15.4 (for UWB) and IEEE 802.15.6 (for UWB and IBC), respectively. This paper presents an in-depth overview of recent studies and advances in the field of application of UWB and IBC technologies for wireless body sensor communication systems. Full article

The heart consists of billions of cardiac muscle cells—cardiomyocytes—that work in a coordinated fashion to supply oxygen and nutrients to the body. Inter-connected specialized cardiomyocytes form signaling channels through which the electrical signals are propagated throughout the heart, controlling the heart’s beat to beat function of the other cardiac cells. In this paper, we study to what extent it is possible to use ordinary cardiomyocytes as communication channels between components of a recently proposed multi-nodal leadless pacemaker, to transmit data encoded in subthreshold membrane potentials. We analyze signal propagation in the cardiac infrastructure considering noise in the communication channel by performing numerical simulations based on the Luo-Rudy computational model. The Luo-Rudy model is an action potential model but describes the potential changes with time including membrane potential and action potential stages, separated by the thresholding mechanism. Demonstrating system performance, we show that cardiomyocytes can be used to establish an artificial communication system where data are reliably transmitted between 10 s of cells. The proposed subthreshold cardiac communication lays the foundation for a new intra-cardiac communication technique. Full article

In this paper, we propose and validate using the Intra-body communications channel as a biometric identity. Combining experimental measurements collected from five subjects and two multi-layer tissue mimicking materials’ phantoms, different machine learning algorithms were used and compared to test and validate using the channel characteristics and features as a biometric identity for subject identification. An accuracy of 98.5% was achieved, together with a precision and recall of 0.984 and 0.984, respectively, when testing the models against subject identification over results collected from the total samples. Using a simple and portable setup, this work shows the feasibility, reliability, and accuracy of the proposed biometric identity, which allows for continuous identification and verification. Full article

An intrabody nanonetwork (IBNN) is composed of nanoscale (NS) devices, implanted inside the human body for collecting diverse physiological information for diagnostic and treatment purposes. The unique constraints of these NS devices in terms of energy, storage and computational resources are the primary challenges in the effective designing of routing protocols in IBNNs. Our proposed work explicitly considers these limitations and introduces a novel energy-efficient routing scheme based on a fuzzy logic and bio-inspired firefly algorithm. Our proposed fuzzy logic-based correlation region selection and bio-inspired firefly algorithm based nano biosensors (NBSs) nomination jointly contribute to energy conservation by minimizing transmission of correlated spatial data. Our proposed fuzzy logic-based correlation region selection mechanism aims at selecting those correlated regions for data aggregation that are enriched in terms of energy and detected information. While, for the selection of NBSs, we proposed a new bio-inspired firefly algorithm fitness function. The fitness function considers the transmission history and residual energy of NBSs to avoid exhaustion of NBSs in transmitting invaluable information. We conduct extensive simulations using the Nano-SIM tool to validate the in-depth impact of our proposed scheme in saving energy resources, reducing end-to-end delay and improving packet delivery ratio. The detailed comparison of our proposed scheme with different scenarios and flooding scheme confirms the significance of the optimized selection of correlated regions and NBSs in improving network lifetime and packet delivery ratio while reducing the average end-to-end delay. Full article

Wireless NanoSensor Networks (WNSNs) are a new type of network that combines nanotechnology and sensor networks. Because WNSNs have great application prospects in intra-body health monitoring, biomedicine and damage detection, intra-body Wireless NanoSensor Networks (iWNSNs) have become a new research hotspot. An energy balance clustering routing protocol (EBCR) is proposed for the intra-body nanosensor nodes with low computing and processing capabilities, short communication range and limited energy storage. The protocol reduces the communication load of nano-nodes by adopting a new hierarchical clustering method. The nano-nodes in the cluster can transmit data directly to the cluster head nodes by one-hop, and the cluster head nodes can transmit data to the nano control node by multi-hop routing among themselves. Furthermore, there is a tradeoff between distance and channel capacity when choosing the next hop node in order to reduce energy consumption while ensuring successful data packet transmission. The simulation results show that the protocol has great advantages in balancing energy consumption, prolonging network lifetime and ensuring data packet transmission success rate. It can be seen that EBCR protocol can be used as an effective routing scheme for iWNSNs. Full article

Intrabody communication (IBC) has drawn extensive attention in the field of ubiquitous healthcare, entertainment, and more. Until now, most studies on the modeling and characterization of capacitive coupling IBC have been conducted in open space, while influences when using metallic-enclosed environments such as a car, airplane, or elevator have not yet been considered. In this paper, we aimed to systematically investigate the grounding effect of an enclosed metal wall of a vehicle on the transmission path loss, utilizing the finite element method (FEM) to model capacitive coupling IBC in an in-vehicle scenario. The results of a simulation and experimental validation indicated that the system gain in an in-vehicle scenario increased up to 7 dB compared to in open space. The modeling and characterization achieved in this paper of capacitive coupling IBC could facilitate an intrabody sensor design and an evaluation with great flexibility to meet the performance needs of an in-vehicle use scenario. Full article

Intra-body Communication (IBC) is a communication method using the human body as a communication medium, in which body-attached devices exchange electro-magnetic (EM) wave signals with each other. The fact that our human body consists of water and electrolytes allows such communication methods to be possible. Such a communication technology can be used to design novel body area networks that are secure and resilient towards external radio interference. While being an attractive technology for enabling new applications for human body-centered ubiquitous applications, network protocols for IBC systems is yet under-explored. The IEEE 802.15.6 standards present physical and medium access control (MAC) layer protocols for IBC, but, due to many simplifications, we find that its MAC protocol is limited in providing an environment to enable high data rate applications. This work, based on empirical EM wave propagation measurements made for the human body communication channel, presents IB-MAC, a centralized Time-division multiple access (TDMA) protocol that takes in consideration the transmission latency the body channel induces. Our results, in which we use an event-based simulator to compare the performance of IB-MAC with two different IEEE 802.15.6 standard-compliant MAC protocols and a state-of-the art TDMA-based MAC protocol for IBC, suggest that IB-MAC is suitable for supporting high data rate applications with comparable radio duty cycle and latency performance. Full article

In this paper, we investigate the use of fat tissue as a communication channel between in-body, implanted devices at R-band frequencies (1.7–2.6 GHz). The proposed fat channel is based on an anatomical model of the human body. We propose a novel probe that is optimized to efficiently radiate the R-band frequencies into the fat tissue. We use our probe to evaluate the path loss of the fat channel by studying the channel transmission coefficient over the R-band frequencies. We conduct extensive simulation studies and validate our results by experimentation on phantom and ex-vivo porcine tissue, with good agreement between simulations and experiments. We demonstrate a performance comparison between the fat channel and similar waveguide structures. Our characterization of the fat channel reveals propagation path loss of ∼0.7 dB and ∼1.9 dB per cm for phantom and ex-vivo porcine tissue, respectively. These results demonstrate that fat tissue can be used as a communication channel for high data rate intra-body networks. Full article

Network lifetime maximization of wireless biomedical implant systems is one of the major research challenges of wireless body area networks (WBANs). In this paper, a mutual information (MI)-based incremental relaying communication protocol is presented where several on-body relay nodes and one coordinator are attached to the clothes of a patient. Firstly, a comprehensive analysis of a system model is investigated in terms of channel path loss, energy consumption, and the outage probability from the network perspective. Secondly, only when the MI value becomes smaller than the predetermined threshold is data transmission allowed. The communication path selection can be either from the implanted sensor to the on-body relay then forwards to the coordinator or from the implanted sensor to the coordinator directly, depending on the communication distance. Moreover, mathematical models of quality of service (QoS) metrics are derived along with the related subjective functions. The results show that the MI-based incremental relaying technique achieves better performance in comparison to our previous proposed protocol techniques regarding several selected performance metrics. The outcome of this paper can be applied to intra-body continuous physiological signal monitoring, artificial biofeedback-oriented WBANs, and telemedicine system design. Full article